Card mother ASROCK ConRoeXFire-eSATA2 AUDIO for Windows7 DRIVERS

Similar Questions

• Impossible to activate the hard disk SATA card mother Asrock G31M-GS

  I have a desktop with the motherboard Asrock G31M. This is IDE and SATA connections I was using an IDE hard drive, I want to now put to update to a SATA drive. I have a Western Digital WD 1600 and a Maxtor Diamondmax and I can't have one of them to work.  It seems that they get recognized in bios but does not start until I can load the windows OS.

  I spend on the computer, it starts at the BIOS and when it should start windows or ask for the installation disc, it goes back to the Asrock start page and freezes.

  The DVD player is detected, but which is connected to the decision-making of the IDE.

  Ideas please

  Hello

  To enable or disable SATA hard drive to the motherboard, please contact Asrock for assistance.

  Asrock Support: http://www.asrock.com/support/index.asp

  Hope the information is useful.

• ASUS IPMTB-TK Pegatron card mother watt minimum / maximum specifications for the new power supply

  I need to get some update a new GPU card will need a bigger PSU but can't seem to find the specifications of power to my motherboard. I know that connections in the search of what power this motherboard is rated for.  Help, please! and thank you Asus Pegatron IPMTB-TK Intel x 58 Socket 1366 mATX

  Hello

  You should be able to use a power supply up to 650 watts.  I've seen a few posts on this forum where more than 650 Watt power supply would not work.  I have successfully used a Corsair HX650 with the same motherboard.

  You have some good recommendations for old_geekster and wb2001.

• I upgraded my card mother asrock

  I have improved my mainboard from asrock with an amd phenom quad only to find out that my index is LOW?

  Click Start, type: check the windows experience index

  Press enter on the keyboard

  Click're reun assessment"

• First time with a card mother OEM and try to find the drivers

  Hello world

  This is a new game for me, the world of OEM motherboards. I just realized that a certain type of motherboard a motherboard manufacturer can have all sorts of variations when performed as an OEM Board for the likes of HP.

  I have just acquired an old Pentium 4 motherboard. Now, before your eyes start to roll, I am is not a cheapskate here and in fact need this type of motherboard, not a sign of bang dual core or quad wiz who actually do not work with my software. It is so why I am persevering with a print like this.

  It's an Asus P4SD - Rev 1.06

  3 pci slots

  1 agp slot

  4 usb ports

  1 firewire port

  1 ethernet port

  1 PS/2 mouse port

  1 PS/2 keyboard port

  4 memory DIMM slots (some computers HP with this Council have only 2 DIMM slots)

  Built No. taken in vga (seems some versions of this Council have built in graphics)

  So not knowing what HP computer that came out I cannot locate the correct drivers. As far as Asus goes, this card is not listed on there pilot site.

  Y at - there no way to know what HP PC came this motherboard?

  See you soon,.

  Keith.

  On the issue of SATA - if the installation disc that serves as an integrated SATA drivers then then this might explain it.  WinXP on its own did not include them, but some have them slipstreamed into the installation. Either that or the BIOS was set to emulate the IDE interface for easy installation.

• WINDOWS 10 AUDIO FOR DELL DRIVERS

  So I did a clean install of Windows 10 on my Dell OptiPlex GX620 and there is no display drivers. I went to update in the Manager of devices but found nothing. I googled only to get this information from Dell.

  product not tested for Windows 10 upgrade

  Dell is not stable or develop Windows 10 drivers for this product. If you choose to upgrade, some features, applications and connected devices may not work as expected. »

  So this means that we should not install windows 10? or what Dell catch up to new technology?

  Please help someone

  This material is not new technology than it is from 2005, ten years... 64-bit Windows 10 must be incompatible with this model because of the processor. 32-bit Windows 10 should work fine however.

  If you use Internet Explorer 11, you should be able to get this driver from the Microsoft Update Catalog:

  http://catalog.update.Microsoft.com/v7/site/ScopedViewInline.aspx?UpdateId=bf0b1225-20cf-4be7-a0f6-d854183780f1

  Then view the shopping cart and download the driver (toll-free):

  http://catalog.update.Microsoft.com/v7/site/ViewBasket.aspx

  Then, you can install the driver through the Device Manager:

  http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-IDs-and-downloading-and-installing-Dell-system-drivers-in-the-correct-order/driver-installation-via-the-Device-Manager/

  You can probably install the 32-bit driver on Windows 10 32 Bit Vista:

  http://downloads.Dell.com/audio/R145551.exe

• Drivers Windows 7 x 64 for the card mother Memphis-M

  Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

  Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

  I need:

  Simple communication controller PCI Chipset, USB 3.0.

  Thank you and waiting for a response.

  Hello:

  You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

  Chip set:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  USB 3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

• HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6

  So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.

  To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.

  If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.

  Thanks to all who take the time to read/answer

  Drew

  At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.

  You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.

  EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.

  Cards with BIOS double EVGA

  http://www.EVGA.com/articles/00767/

  I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.

  Sapphire video card specifications

  http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

  What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.

  I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.

• Need drivers chipset card mother AmethystM (MSI-7184), for Vista 64 bit OS

  I'm looking for the proper chipset drivers, or compatible drivers, for the card mother MSI-7184. The chipset is ATI RS482 & ATI SB400. Specifically, I'm looking for the following drivers:

  PCI express filter driver - currently using Catalyst 8.3 ATI PCI Express (3GIO) Filter Driver

  Configuration AMD address map - currently using the standard driver microsoft

  HyperTransport (MC) Configuration of the Trace Mode - currently using the standard driver from microsoft and DRAM AMD

  AMD HyperTransport Configuration - currently using the standard driver microsoft

  Configuration of various AMD - currently using the standard driver microsoft

  ATI i/o Communications Processor LPC Controller - currently using the standard driver microsoft

  ATI i/o Communications Processor PCI Bus Controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Controller ATI i/o Communications Processor USB 2.0 EHCI - currently using the standard driver microsoft

  Controller IDE ATA standard - currently using microsoft standard driver - it's supposed to be SATA I think that my HD is connected to it and its SATA

  Standard ATA IDE Controller - currently using the standard driver microsoft

  Bridge standard CPU PCI - currently using the standard microsoft driver - what is supposed to be ISA instead of the processor?

  PCI and standard PCI to PCI Bridge - currently using the standard driver microsoft

  I'm looking for drivers because my CPU usage is constantly at 45-60% usage. My processor is an AMD Athlon 64 X 2 4200 +. Devices and drivers of Thease are what Vista has recognized and loaded. I don't think that is correct. Any help on this would be greatly appreciated.

  Sean

  OK, I found the appropriate drivers!

  ATI drivers:

  Drivers of North Bridge: catalyst 8-12_vista32-64_sb_72277

  SMBus, & IDE drivers: catalyst 8-12_vista32-64_72274 - run the program so it extracted all files in c:/ATI do get out. Then manually install two IDE controllers and SMBus drivers by using Device Manager.

  Also, I solved the problem with the hardware interupts. The on-board USB controller and suport Legacy interfere with the video card. To fix this go into the BIOS and under Advanced, disable Legacy support. Then in Device Manager disable all three usb controllers. These controllers have been disabled as soon as the missing of interruptions. I'll get a PCI usb so I can still have USB ports.

  Message edited by shfire2000 on 01/26/2009 21:51

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function.

  I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function. I posted a link to the image below.

  Nevermind, I deleted the image by accident. Oops.

  https://SkyDrive.live.com/redir?RESID=D50158D65A52CBBA! 1928 & authkey =! AKdLQ4hGMOynvnc

  If the manufacturer of the motherboard doesn't provide drivers specific win7 there is none.

  If there is the bit Vista drivers ' appropriate ness, what they would usually work

• I want to improve my card mother and CPU on my PC. Can I use transfer windows settings for it?

  I want to improve my card mother and CPU on my PC. I like to keep all my settings from my games, etc, so I don't have to buy/purchase new and purchase/buy a new OS Win. I am running Win 7 Pro. What is the best way to address the issue? I keep my OS on a SSD and all the other stuff is on a separate HARD disk. Basically, I need to install the new chipset and other pilots MB.

  You can save files and settings and restore to the new installation of Windows, but the games cannot be guaranteed. Just give a try. If it works, it's fine. If this isn't the case, you must reinstall the games.

• Card mother compatible ECS MCP73VT-PM please. I need a motherboard that can hold in HP IMEDIA X 2414

  Boots of my HP DESKTOP IMEDIA X 2414 (bought from PC World UK 2.5 years) is no longer.
  TECHNICAL DATA:
  MATERIAL:
  IMEDIA X 2414
  Intel Core 2 QUAD processor Q6600
  3 GB DDR2 #320 GB 7200 RPM SATA HARDISK
  NVIDIA: GEFORCE 7050 up to 1407 MB
  P/N: PB80128501
  [Personal information]
  PROBLEM: Switch on computer and you get NO SIGNAL on monitor LCD ACER.
  MY STEP BY STEP TOUBLESHOOTING:
  1 Unlpug monitor and a card on my laptop (very good for my laptop boots) so WATCH not IS NOT THE PROBLEM.
  2 replace MY power supply with a new power supply, no change (IE NO SIGNAL appears ON the screen LCD ACER), PSU (Power Supply Unit) is not the problem.
  3. REMOVE 2 DDR2 RAM cards, switch on the desk, and I get a continuous beep. Apparently
  This suggests that the motherboard (ECS MCP73VT-PM) is good.
  4 reinstall the 2 DRR2 RAM cards, insert a new external graphics card, unplug the monitor from
  Graphic INTEGRATED card and plug it into an external graphics card, turn on the computer, result: ALWAYS
  NO SIGNAL on the monitor, so graphics card isn't necessarily the problem.
  5. extract the whole motherboard of the computer case, use my magniflying glass to inspect
  all the capacitors. No capacitor doesn't show any corrosion to their background, no bump on top, without leakage
  any where. Then I remove the (intel Core 2 QUAD processor Q6600) processor, check it carefully.
  no leakage.
  (6 reinsert the processor, turn on the computer, yet I get NO SIGNAL ON monitor)
  
  Question: What is my problem
  Answer: My motherboard is faulty and I can't find the fault.
  Now, I want to replace the motherboard together and then to reuse my 2 DDR2 RAM and processor cards
  on a motherboard which must be geometrically compatible with ECS MCP73VT-PM motherboard.
  Could you tell me what kind of mother I have to buy. I am absolutely sure that my 2 DDR2 RAM cards are still usable because I tested them on another computer that can boot up. I do not know
  on the processor, because I was not able to test it on another machine.
  Help, please. MY new motherborad should be able to adapt in the case and has compatible
  audio.

  It is a HP support forum.

  I recommend that you give Packard Bell support a trial.

• Audio for Windows 7 to cancel everything at stake

  Windows 7 Pro

  EVGA X 58-class 3 E770

  EVGA GTX 570HD 2.5 GB/1.2 PhsyX

  Intel Core i7 950

  Corsair AX1200i

  Corsair H80i

  Corsair K95

  Razer Mamba 2012

  Map its Creative Sound Blaster Fatal1ty X - Fi Titanium

  Logitech Z-5500 5.1 Surround

  In the last days of my audio was cut all at stake. It works fine for the last 2-3 years I had my gaming pc. No problem what so ever. Until recently all of a sudden the sound started cutting. The volume window would freeze and I can access is no longer. The task manager would also freeze when I try to launch it from the taskbar. CTRL + Alt + Del would not respond and neither would the Ctrl + Alt + Delete. PC freezes completely and would have reset. Sometimes, either from a difficult start or reset, pc would not boot the screen until what I hit the reset button. Here are the steps that I had done in the past few days. The list is not in order, but I assure you, I did all and repeated more than once, had a few.

  -UN/re-installed EVGA GTX 570HD 2.5/1.2gb card and rotated in PCIe slots to eliminate bad possible housing
  -UN/re-installed geForce Drivers 320.49 and rolled to 314.22
  -UN/re-installed creative Sound Blaster Fatal1ty X - Fi Titanium PCIe Sound Card
  -UN/re-installed Drivers creative Software
  -Alternative UN/re-installed PAX Sound Blaster Fatal1ty X - Fi Titanium Software
  -inbetween each installation ran CCleaner to ensure a shaved someone and install the drivers.
  -ran with the CenturyLinks F-Secure Antivirus software system analysis
  -a ran Windows Defender
  The speakers that I use are the Logitech Z-5500 5.1 surround sound.
   
  Everything seemed to work even using media player to listen to music until I start the game on Steam / Call of Duty: Black Ops2 multiplayer and his then will be stop. I must then restart/reset/reboot everything computer to get the sound working again. The Task Manager is not accessible when his fate, or the SndVol control would work from the taskbar. PC would completely freeze when I try to access it.
   
  There is only one option that really worked that would return to his on board using the Realtek software accompanying the card mother of-EVGA X 58 Classified 3 E770 I use but to be honest, it's crap, when you're playing it would force me to increase my noise level at 10bars where I would normally put to 3bar. You do not hear the people who speaks clearly and the sound is horrible other that just play music.
   
  I did tried to check on system notifications and it lists a few warnings/criticals, but there is really nothing I can do with it.  I can't send it out for a cause of assessment is not option for her.
  Any help would be very appreciated to my situation. Don't know what category it is, because it fits in several areas, but I hope that either one would suffice.

  With a single game installed, it is a little hard to say, but works with all other audio sources and audio integrated works with the game there seems to be a conflict with the
  game. Drivers, or settings.
  There's a setting on the control panel of sound cards that activates / deactivates default EAX?
  Most of the usable by EAX games have an option in the settings, but EAX is not used in games like
  much (or at all?) these days, so if the card enabled as a framework fixed, it might cause a problem.

  -You can post on the Steam forums to find if there is a common problem with this game
  When you use a configuration with HDMI and a sound card.

  -What are still I do not understand is that what you said the audio was working in the game with the sound card and
  then suddenly stopped working, Yes?
  If the game was running and had audio sound card, so it can be useful to a
  Delete the configuration file from games, or reinstall the game.

  -What else do you have installed at this time?
  -Have you tried to run the game to boot, or are you still that he keep in mind?

  -I've never used HDMI, so I don't know if that would disable the sound card, but
  HDMI it has it's own small Pandora's box, especially when you try to use external speakers
  with the sound card instead of the speakers on the monitor/TV.

  -Troubleshooting is easier with everything that pared back to basics and kept it that way until the
  problem is solved. I would like to disable audio in the BIOS or uninstall these drivers,
  and uninstall the Audio drivers that come with the graphics drivers.
  (I do it as a matter of course. You don't need to have installed drivers that you don't use. Just
  Adds another possibility of conflicts).

  BTW - try Fusion (formerly known as Driver Sweeper) driver when you find it is necessary to make a
  complete cleaning of a driver.
  Treexy external page

  .

• Dell desktop computer just ran scan & system - failure of the card mother how fix this?

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  First of all - the 'motherboard' does not mean 'hard drive '.  This means that the "mother".  :-)  The drive is the storage processors is the brain and everything connects through... the "mother".

    
  Second - why sweep you all the months?  Unless you are having a problem - well - I suggest you not to do so.  Heck - you may see a false positive.  Do you have any indication that you have a hardware failure?
    
  Here's what I suggest:
  (1) stop the execution of this "free scan of Dell.
  (2) ensure that the drivers of motherboard, video card, network device and peripheral chipset audio are later you can get - on the Dell site for your specific Service and operating system combination label (drivers and downloads section, use your service number and put in the operating system you are using.)
  (3) never use Geek Squad.
  (4) what is the "MSN Help Menu?
  (5) choose AN antivirus software - two is misguided and may cause problems.
  (6) run some scans of malware with the details, I will give you right after that...
    

  Regarding AntiVirus - free are very good: Avira, AVG, Avast, UnThreat

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  For the printer - you have downloaded and installed the form here?
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128284&infoType=downloads&platform=OSF_W_7-64