Card mother Inspiron Desktop E2140 and 0RY007

Similar Questions

• Replacement card mother Inspiron 3847

  I had a problem so that the update of the bios and AC power to quit smoking. I tried to reset by removing the CMOS without result.

  I would be able to replace the motherboard which is a large bear 13040-1?. What is a 88DT1?

  earglued

  I had a problem so that the update of the bios and AC power to quit smoking. I tried to reset by removing the CMOS without result.

  I would be able to replace the motherboard which is a large bear 13040-1?. What is a 88DT1?

  earglued

  Yes, the motherboard can be replaced, but you will need to install an other motherboard OEM in Dell Inspiron 3847 88DT1.

  http://www.eBay.com/ITM/Dell-Inspiron-3847-OEM-Intel-i5-desktop-motherboard-88DT1-socket-LGA1150-Mint-/301310050318

  If you have an active warranty, contact Dell Technical Support.

  Bev.

• card mother Memphis-b: b of memphis

  I bought a new case for my computer, my computer has card mother mephis - b inside and I do not know what pins match the power switch, power led, ect there at - it a model that explains what the pins are what? Help, please.

  Please try the stitching as shown in the graphic below;

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• card mother Dell can change my existing parent outside with one of the same brand and model?

  I have a dell inspiron 530, the motherboard is bad. I was going to get the same model. but I was told that windows will not work on the new. even if they are the same type of motherboard

  Make the point by replacing with the same card mother and model is interpreted as reinstallation on the same computer.

  Change the motherboard starts the process of building a new computer and an OEM of Windows version is only intended to be installed on a computer not two or more. You can purchase licenses for installing Windows on multiple computers, but they aren't meant to business computers home computers.

• Inspiron One 2020 new card mother help

  Greetings & Salmenella

  The high memory slot on the motherboard of my Inspiron One 2020 beeps stop known, two beeps of intervals. Any memory I put in the continuous ringing. It stops if I have a memory stick into the lower slot.

  I need help on the verification of the correct mother card to purchase or if it is a card mother Dell different that I can spend which will enter in the box. I don't mind if I have to make the cuts or small holes in the back plate, since I already have the holes for a tuner card, I bought after that I bought the model which had no openings for cable TV.

  I really don't want to go buy a brand new for a slot with memory 4meg bad computer. I have a solid state, 8 GB RAM and 2 GB of RAM, it runs fast enough that I do not have to buy a new computer. But losing that 4gigs of ram in the bad memory slot. Holy Ding Dong, the hard drive takes forever to stop making noise, surfing slows down and compilation and writing of visual basic for class takes forever.

  Now for the short version.

  What is the correct motherboard model to replace an Inspiron One 2020 or is there a model of mark liked that a motherboard will suit my AIO home and get all my guts of the computer. I have a 5-2390T UC iCore.

  Love,

  Stu

  Any advice for this model are the same - but nothing else that will fit the original.

  www.amazon.com/.../B00I9OQQ7U

• Dell desktop computer just ran scan & system - failure of the card mother how fix this?

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  First of all - the 'motherboard' does not mean 'hard drive '.  This means that the "mother".  :-)  The drive is the storage processors is the brain and everything connects through... the "mother".

    
  Second - why sweep you all the months?  Unless you are having a problem - well - I suggest you not to do so.  Heck - you may see a false positive.  Do you have any indication that you have a hardware failure?
    
  Here's what I suggest:
  (1) stop the execution of this "free scan of Dell.
  (2) ensure that the drivers of motherboard, video card, network device and peripheral chipset audio are later you can get - on the Dell site for your specific Service and operating system combination label (drivers and downloads section, use your service number and put in the operating system you are using.)
  (3) never use Geek Squad.
  (4) what is the "MSN Help Menu?
  (5) choose AN antivirus software - two is misguided and may cause problems.
  (6) run some scans of malware with the details, I will give you right after that...
    

  Regarding AntiVirus - free are very good: Avira, AVG, Avast, UnThreat

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  For the printer - you have downloaded and installed the form here?
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128284&infoType=downloads&platform=OSF_W_7-64

• HP Pavilion Elite e9120y desktop PC and compatibility with video cards

  Hello

  I hope someone can help me: I tried to find the answer to this question, but can't seem to nail a definitive answer.

  I need to update my video card as soon as possible and I need to know if the mother of desktop PC HP Pavilion Elite e9120y (plug herehttp://support.hp.com/us-en/document/c0174290) supports a Sapphire 1 GB Radeon HD 5670 video card

  I know I have to upgrade my power supply at least 400W

  I'd appreciate any help

  Thank you

  This widget could not be displayed.

• H8-1223: card mother HP Angélique Label of ports and diagram

  Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case.  The problem is the case connectors are labeled, but aren't the ports on the motherboard.  I need to have the labels on the ports and connectors of my Board of Directors.  The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset.  I need information on the place where to connect or if these connectors at all.  I'll try to send some photos if I can understand how this Bluetooth to my cell phone.

  

  On the left is the cornerstone of HP mother.  I wanted you to see the ports that are on the map. PSWD HP LPC.  The line is the Corsair Obsidian Series 350 d connectors.  How can I connect these?  Or do I really need them?

• Pavilion A4316F Desktop with M2N78-(Violet6) card mother CPU Upgrade

  I looked at the HP Site before making the CPU to upgrade to purchase (http://support.hp.com/us-en/document/c01925562) my office.  I bought an AMD Phenom II x 4 processor clocked at 3.4 Ghz.  When I installed the CPU and try to start, I have a unknown, computer processor stop error.  From what I can tell on the HP site, this processor should work with this motherboard.  Any suggestions?

  Please provide the role other than whole or number of the plateau of the AMD processor for our review. Only 3.4 Ghz AMD Phenom II x 4 processors I know are the 125 watts Note: AMD Phenom II x 4 965 Black Edition and the140 watts Note: AMD Phenom II x 4 965 Black Edition. None of these processors are compatible with the Violet6 motherboard in your system. The card mother Violet6 is intended to be used with processors up to 95 watts. In addition, "Black Edition" CPUs have discovered clock multipliers to be used in overclocking, but does not support the Violet6 overclocking motherboard.

  Please consider these 95 watt AMD AM3 processors except CPU 'Phenom II X 6' and processors ' B #

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• Help with the new card mother and Vista problem?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  Hey icuhavoc

  are recovery disks to reinstall vista with the original hardware installed if I understand you correctly know what records you need to know a set of manufacturer's recovery disks

  If it is pre-installed this is an oem license and does not change unless you did it in consultation with the manufacturer of models of motherboards and processors

  Walter, the time zone traveller

• I want to improve my card mother and CPU on my PC. Can I use transfer windows settings for it?

  I want to improve my card mother and CPU on my PC. I like to keep all my settings from my games, etc, so I don't have to buy/purchase new and purchase/buy a new OS Win. I am running Win 7 Pro. What is the best way to address the issue? I keep my OS on a SSD and all the other stuff is on a separate HARD disk. Basically, I need to install the new chipset and other pilots MB.

  You can save files and settings and restore to the new installation of Windows, but the games cannot be guaranteed. Just give a try. If it works, it's fine. If this isn't the case, you must reinstall the games.

• I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function.

  I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function. I posted a link to the image below.

  Nevermind, I deleted the image by accident. Oops.

  https://SkyDrive.live.com/redir?RESID=D50158D65A52CBBA! 1928 & authkey =! AKdLQ4hGMOynvnc

  If the manufacturer of the motherboard doesn't provide drivers specific win7 there is none.

  If there is the bit Vista drivers ' appropriate ness, what they would usually work

• I had to get a new card mother and lost of Photoshop CS5.

  I had to get a new card mother and lost of Photoshop CS5.

  I'm going to install and, because it is an upgrade, need CS 4 installed. I can not CS4 to start installation. It fails is there a way to get around this?

  You don't need to install CS4, but do not have your serial number CS4 enter when asked