Card mother OptiPlex GX 280
Welcome to all,
My OptiPlex GX 280 motherboard has finished its task and decided to stop working. I didn't find the precise name of the motherboard. I'm thinking replacing it or looking for DIY fix.
It starts with one morning, when I turned on the POST test failed (the CPU fan works on RPM max (no beep)). I tested the PSU, RAM, hard drives, video card and all of the components, only the test of the motherboard have not been tested, according to the exclusion.
I prefer the repair so I would be grateful to tours, trips or ideas if it's possible. More thank you for your assistance in advance.
Best wishes
David
Genuine Dell OptiPlex GX280 card mother Systemboard motherboard for the system minitour (SMT), Reference Dell Compatible numbers: G5611, Y5638, U4100, H7276, FC928, U7915, K5146, KC361, XF961, XF954, X 7967
http://www.Amazon.com/Dell-motherboard-SystemBoard-mainboard-compatible/DP/B003EUUMV0
It's almost the cost of a complete system of GX620 minitower.
The Board is mounted on a tray that comes out.
Tags: Dell Desktop
Similar Questions
-
Card mother Optiplex 755 SFF fit in a Dell optiplex 745 Mini-Tower dualcore?
Hello, I might be able to buy a mini-tower Optiplex of second hand, and I would like to install the motherboard etc. my Optiplex 755 SFF.
Wilting thi made?
The idea is that, with the Mini tour, I can buy a better GPU.
thanx.
No, it does not. Of the Board of Directors, the number of slots available, etc. is different.
-
Form factor of the Board mother OptiPlex 790 DT?
Hello
What is the form factor of the motherboard used in Optiplex 790 (DT)?
Can I use a card mother microATX? It to be precise.
THX.
It is mATX, but you may need mode to your own panel connector before (switch, power, light etc.).
-
Drivers Windows 7 x 64 for the card mother Memphis-M
Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.
Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.
I need:
Simple communication controller PCI Chipset, USB 3.0.
Thank you and waiting for a response.
Hello:
You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.
DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES
Chip set:
Comms Simple PCI:
USB 3:
-
Replacement card mother Qosmio G10
After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:
1. second HARD drive internal no more seen.
2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
3. always on cooling fan.Upgrade the motherboard consisted of:
1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
2. loading the CD-ROM TCN0000006 official update tool.
3. no recovery BIOS or EC/KBC.Any idea?
I m wondering how you did update the information in the DMI?
As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
So maybe his bad card mother -
Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09
What started it stops early on with the error:
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03I have the option to continue with F! that works.
I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.
Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
The error indicates this device 01 because of controller 09 conflict
Have you tested the RAM?Recommend doing this! You can use a tool like Memtest or similar.
Maybe it isn't that a Ram problem and new modules could solve your problem. -
H8-1223: card mother HP Angélique Label of ports and diagram
Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case. The problem is the case connectors are labeled, but aren't the ports on the motherboard. I need to have the labels on the ports and connectors of my Board of Directors. The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset. I need information on the place where to connect or if these connectors at all. I'll try to send some photos if I can understand how this Bluetooth to my cell phone.
On the left is the cornerstone of HP mother. I wanted you to see the ports that are on the map. PSWD HP LPC. The line is the Corsair Obsidian Series 350 d connectors. How can I connect these? Or do I really need them?
-
HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6
So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.
To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.
If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.
Thanks to all who take the time to read/answer
Drew
At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.
You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.
EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.
Cards with BIOS double EVGA
http://www.EVGA.com/articles/00767/
I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.
Sapphire video card specifications
http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng
What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.
I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.
-
What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge
You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!
@ Big_Dave
Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;
Intel Core i3-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i3-3xxx (Ivy Bridge) Dual Core 456 Intel Core i5-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i5-3xxxT (Ivy Bridge) Quad Core 152 Intel Core i5-3xxxS (Ivy Bridge) Quad Core 756 Intel Core i5-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxxK (Ivy Bridge) Quad Core 676 Intel Core i3-2xxx (Sandy Bridge) Dual Core 756 Intel Core i3-2xxxT (Sandy Bridge) Dual Core 256 Intel Core i5-2xxx (Sandy Bridge) Quad Core 95W Intel Core i7-2xxx (Sandy Bridge) Quad Core 95W Dual-core Intel Pentium G6xx (Sandy Bridge) 756 Dual-core Intel Pentium G6xxT (Sandy Bridge) 256 Dual-core Intel Pentium G8xx (Sandy Bridge) 756 and supported memory;
Dual channel memory architecture
Four DIMM DDR3 240-pin connectorsSupports DIMM DDR3 modules
PC3-10600 (1333 MHz)
PC3-12800 (1600 MHz)
Memory non - ECC, unbuffered
Supports 1 GB, 2 GB and 4 GB DIMM
Supports up to 4 GB on 32-bit systems
Supports up to 16 GB on 64 - bit systems
Frank
-
card mother Memphis-b: b of memphis
I bought a new case for my computer, my computer has card mother mephis - b inside and I do not know what pins match the power switch, power led, ect there at - it a model that explains what the pins are what? Help, please.
Please try the stitching as shown in the graphic below;
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
Pavilion Elite 300Z: identification of card mother sata socket
My card mother Aloe-GL8E has 6 sockets SATA of different colors - black, white, blue, yellow, red. What the colors mean on this forum, as I think they are all 3 GB/s? I want to add a second HDD - does matter which plug it goes in?
The plugs are numbered from 1 to 6. The boot order will follow in succession.
I found a reference. Can you check the color and number?
Dark blue - disc 1
White - disc 2
Light blue - Disc 3
Yellow - disc 4
Red - disc 5
Black - disc 6
-
Card mother MS-7613 Iona: Corsair XMS 3 2 X 4 GB DDR3 1333 mhz compatible?
Hi all.
I have a simple question: is this compatible with the standard ram card mother MS-7613?
http://www.Corsair.com/en/CMX8GX3M2A1333C9
How did you select the Corsair ram? I can't find a link suggesting its compatibility with your exact computer. I found three different modules 4 GB here who are recdommended. Found an example of it on Amazon.
-
I get a Toshiba satellite 1900-102 with a default card mother work
Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?
Or does anyone know where to find that?
Hi Erdl,
I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!
In my opinion, you will have more luck at ebay or used equipment selling home pages!
Sorry
Campino -
Questions card mother ThinkStation D20
Hi I was wondering the card mother D20 does support Geforce SLI? Ordinary GPU not of Quadros?
Also I was wondering what is the shape of the motherboard? Is it E - ATX or ATX?
Welcome to the forum
SLI is only supported by Quadro in workstations. It is a limitation by NVidia, not Lenovo. Very few applications workstation (CAD/DCC/oil/gas/etc) supports either benefit from SLI anyway so diminishes the need of this.
Map of the D20 system is a layout owner but closer to E - ATX. You need to change your D20 chassis if you are planning a Board from the aftermarket. The spacers will be the biggest obstacle with wiring being a close second.
-
Question about the HP 2AFB hand/card mother.
I'm looking to level/add in a graphics card in my PC for games purposes. I was wondering if a GeForce GTX 710 would be able to be added to this motherboard? Any answer would be useful!
Hello
Your machine has appeared shortly for a special promotion, it is similar to the following machine located on different countries with the SAME montherboard
http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03806462
Figure 1: The card mother Tenby-U
Maybe you are looking for
-
3.1b1 mozilla lightning multiweek grey month week
System is running Windows 8.1 64bits. Thunderbird Version 31.3. Version 3.1b1 of lighting, the only view I get daily. Week, midweek and monthly is grayed out. Also imported ics calendar 3 files and must remove two but they will not erase. How can I r
-
Why my iTunes uses a random filename as album art?
Hello world I use iTunes (most recent) 12.4 and I wanted to add some radio stations online to a my new playlist of radio Stations of Radio Stations have worked so I waited until there was no work. Now my iTunes chose a random file (PDF) as the album
-
How can I update to owner information when buying a computer used for XP?
How 2 change new owner information when buying a used computer
-
I have a laptop full of photos that I want to save. I have a removable drive. storage... It must be elementary... I do not see how... HELP PLEASE. Important to save the pilot ich % of R Humphreys for walk across America for diabetes.
-
Hi all I have a problem with my system which concerns the upgrade of Windows 10 - I agreed to download, and then decided to not put at level I like Windows 7 as-is. Windows 10 then installed himself anyway after I didn't say thank you, and after givi