Card SDHC 4 GB not recognized Vista

Similar Questions

• CARD MEMORY 64 GB NOT RECOGNIZED BY MY MOBILE GALAXY NOTES II

  Dear Sir

  I use the 64 GB memory card in my samsung II Galaxy note, card memory sunddenly is not recognized by mobile and it was showing audit errors, other card memory running in my laptop. Help, please.

  Hola, BAVAJI

  Dear user
  Como otras memoria tarjetas is ejecutan en su celular, it check that el mismo acepta las nuevas tarjetas of 64 GB SDXC (extended capacity) son. Telefono VEA is if el este logo, o el manual.
  Means Quebec 4 32 GB SDHC (from alta capacidad) son.
  Asumiendo knew movil, if tiene el logo SDXC, entonces all lo siguiente:
  1- Por favor, in primer lugar, clean los pines of the tarjeta con alcohol isopropilico (o comun). Luego, see if works.
  - 2if no es asi, seguimos: apply the SDXC card in a laptop (o mas), directly known puerto, con a good useful (no UN lector tarjetas, ojo).
  3- Hacer copia of seguridad del contenido, y guardarlo in otro lugar.
  4- el icono of the tarjeta, haga click con el boton derecho del raton, y luego / Propiedades / Herramientas / Comprobacion errores.
  Suerte.

  Saludos, Alfred.

  -------------------

  Hi, BAVAJI

  Dear user

  As other cards of memory running on your mobile phone, check that the same accept new 64 GB cards, which are the SDXC (Extended Capacity). See if the phone has this logo, or in the manual.
  Don't forget that the 4 GB to 32 GB are SDHC (high capacity).
   
  Assuming that your cell phone, if the SDXC logo, then we will:

  1- please, first of all, clean the pins on the card with isopropyl alcohol (or common). Then see if it works.

  2- if not, we continue: place SDXC card in a laptop (or more), directly to its port, with a good adapter (NOT a card reader, an eye).

  3- make the backup content, then save it somewhere else.

  4- in the map icon, click on by the right button of the mouse, then use / properties / tools / error checking.

  Chance.

  Sincerely, Alfred.        (Google translation).

• Most optical discs not recognized Vista

  Over 3 years, Vista SP2 PC most CD is not recognized.  The drive is: eject the tray opens.  Only a single disc (audio) is recognized.  Have swapped the PATA ribbon cable and swapped the drive itself.  CHKDSK and SFC show no problem.  I deleted the UpperFilters.  All to nothing does not.  I have not started on a live CD again.  There that something remains to be done before an inplace install Vista?

  Hi Gardner. E,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can try to uninstall and reinstall the driver completely system CD\DVD and check.

  Step 1: Uninstall the drivers from Device Manager.

  a. Click Start and type devmgmt.msc and press ENTER.

  b. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  c. right-click on the sound card and choose uninstall.

  d. restart the computer and check.

  You can also read the following article and check:

  http://support.Microsoft.com/kb/982116

  Hope the helps of information.

• USB device not recognized Vista

  All of a sudden my usb ports no longer work. I get a message that my USB device not recognized. I tried other cables without result. I used a Logitec USB mouse and was also download an iPod from itunes update. None of my USB ports work. I tried other devices also.

  Hi RandyPierce,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-not-recognized-by-Vista/b2c712cb-19da-4fbb-aae2-29d4c5d2ad39

  I hope this helps!

• CD/dvd-rom not recognized Vista

  I uninstalled and do reinstall the driver for my dvd player. I see that I have the disc but it will not read anything. I can hear it trying but nothing appears. I can not burn on raw either. I need help and Mr. fix, that it does not download for some reason any.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dell laptop, Studio CD/DVD drive not recognized Vista

  * original title - my CD/DVD drive is Nowhere To Be Found. *

  AIA does not. I tried to burn a Cd but when I when to widows media player, it says "Pleade connect a burner and restart the player."

  I tried a few things already, but none of them helped.

  Ive tried:

  1 running the Microsoft Fixit tool (http://support.microsoft.com/gp/cd_dvd_drive_problems)

  2. find and surprised the UpperFilters and LowerFilters in regedit. (I was unable to find the UpperFilters and LowerFilters because they weren't there.

  3 not able to find reader of CD/DVD in Device Manager, but the 'Drives' tab is there and the only thing that iswdc wd12000bevs-60usto ata device.

  4. It also does not appear in my computer.

  I know the drive works because when I turn the laptop on I can hear the drive spin upward and I'm able to eject the drawer.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Micro SDHC not recognized Vista when the card is inserted in Sansa E250

  Hello

  I have Sansa E250. I used to have the 1 GB microSD card and I was able to access it on my computer with XP.

  Recently, I bought 4 GB micro SD and SDHC cards. Now I have Vista on my computer and when I connect the MP3 player with HLA card installed on a computer I'm not able to access removable drive of the card and I get an error message.

  Is it a Vista thing? Is there some drivers or firmware that I need to install to be able to use my new card CD?

  How do I install it on my Sansa?

  Thank you

  I installed the Rockbox on my Sansa e250 and it works very well and the new 4 gb SD card works as well.

  I can't load the image well then rockbox is on my presets of radi got all erased. But these questions are fine. I can always switch back to Sansa Firmware.

  Thanks again for your help

• BlackBerry Smartphones card MIcro SD is not recognized by my Vista X 64 or Windows XP-based computers (i.e. no drive letter)

  I have a Blackberry "BOLD" with a 1 GB MicroSD card that worked perfectly with my old Curve 8310.  I would like to plug the BB with a USB cable and voila, a drive letter would leap upward and I could easily move files.

  With this "BOLD" and using the same (or any other) SD card, nothing happens.  Although the Desktop Manager software and Device Manager recognizes the BB and everything works fine, the SD card does not appear in the Manager of Windows disk, or as a drive letter in my computer display, or in any software.  No computer does recognize it.  I have to conclude that something is wrong with my "BOLD" refurbished, but I hope someone has a suggestion.

  I tried to change the drive of other readers letters to make room for it, and I tried to update the drivers and reinstall the software and I tried all the different settings in memory on the BB.

  My BB recognize the SD card and I can use the SD card, but no computer will recognize when he's connected with via the USB port.

  My problem was actually quite widespread.  A LOT of people who buy refurbished BB bolding has had this problem.  AT & T needs to tackle this pronto!

• Realtek RTL8187B is not recognized Vista - Satellite Pro L300

  Hello

  I have a Toshiba Satellite Pro L300. It came with vista but I upgraded to 7.
  Now I have installed Vista with all the drivers but there is a problem, the wireless card does not work (RTL8187B) I get to a point that the Device Manager recognizes it, but says he has a problem.
  I downloaded several versions of the driver but nothing. If you could send me an earlier version of the driver or a vista recovery disk that I would be really grateful.

  Please help me that my only hope is to pray...

  I put t don't know what drivers you downloaded but please use portal Toshiba WLAN driver - http://aps2.toshiba-tro.de/wlan/

  He has to work.

  By the way: what type of problem is listed in the WLAN card properties?

• Satellite A100-906 - Bluetooth not recognized Vista

  This laptop came with Windows XP installed and the bluetooth was working fine.
  Unfortunately my HARD drive was destroyed, and after installing a new and I also installed Windows Vista Premium 32 bit.

  The problem is that even if my wireless card works great the bluetooth device is nowhere. It's as if she is not on... even when I try to install the newer bluetooth stack he asks that the device bluetooth turned on!
  Is there a solution to my problem? Is it possible that the BT adapter is destroyed?

  Thanks in advance!

  BT can be used if the BT module is successfully activated. To do this turn on WLAN using WLAN switch and then activate BT using the FN + F8 key combination.
  * You can probably remember how it works. Can you? *

  As I see you now have Vista.
  Does the FN + F8 key combination?
  You can use Flash cards?
  Have you correctly installed all the stuff of Toshiba?

  Boyfriend sorry but if you forget to install something that it won't work because you can not activate the BT module.

• Card SD & Memory Stick not recognized

  Hello

  I have a Pavillion m9517c with the Athlon Phenom Quad-Core processor.  Initially, it came with Vista and when I got Windows 7 software, I installed it on a separate partition so that I can dual boot until I feel comfortable with Windows 7.

  Unfortunately, my cards Secure Digital or my Memory Sticks are recognized.  Is there a driver I can install will fix this?

  Thank you.

  Ron

  Try to uninstall and reinstall the drivers for the card in any case reader.

  Right click on the drives in the Device Manager, select uninstall, and then click OK.

  Once you have removed them both, get off at Bus USB controllers and remove any entries USB Mass Storage Device by using the same process.

  Once it is finished, right-click on any list in Device Manager and select "Scan for hardware changes".  It will redetect and reinstall the drivers for those devices.

• Western Digital My Book 300 1 TB external drive not recognized Vista

  The post road has worked well for about 6 months until he lost power.  I tried everything in all applications help I can find. Western Digital says it's a Vista operating system driver problem.

  Drive external drive of 1 TB Western Digital My Book 300 was unplugged inadvertently power source. Now my Vista OS not only does not recognize the drive, but it is more listed on my screen of material. What should I do?

  Hi famousplumber,

  Please make sure that you have downloaded the latest software/drivers for the external drive:

  http://support.wdc.com/product/download.asp?lang=en

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Microsoft comfort optical mouse 1000 not recognized Vista

  my vista computer does not recognize the new comfort optical mouse 1000

  Here are the instructions on how to install the mouse and software required: http://support.microsoft.com/kb/258785.

  Here are troubleshooting guidelines for the mouse that can help solve the problem:http://support.microsoft.com/kb/321122.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Camera GE not recognized Vista

  I can't get my vista based system to recognize my camera GE A1250 digital camera via usb conn. The camera is recognized on my computer laptop windows 7. Is there a driver that I need and how do I get it?

  Contact the manufacturer: GE.

  Look for a section drivers and downloads on their Web site.

  See you soon. Mick Murphy - Microsoft partner

• Product key not recognized Vista

  Original post: I have a corrupted registry file and all solutions do not work, please help ASAP

  I tried to put in the cd.

  I even tried to re - install, but it does not even recognize my product key.

  I also looked at other problems and similar solutions online, but still does not work.

  Help, please!

  Have you tried a system restore to repair the registry?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA