Carousel graphics DVT causes clipping.

Similar Questions

• Why there are graphics and Movie Clip in Flash?

  Where there are graphics and Movie Clip in Flash?
  
  What is the deference?
  When to choose one of the other?
  It would be simpler if Flash does that Movie Clip (so people are not confusing choose)?
  
  Thank you!
  
  

  Main differences are:

  MovieClip symbols contain their own calendars. That's why they can run animations inside of them that are independent of the main timeline. They are also targeted by actionscript to run the script-driven events, animations, changes, etc.

  Graphic symbols are better used to hold static images images, text or what you create with the drawing tools. Although you can run an animation in them, it should the main timeline to be of the same length to see the full animation. Graphic symbols cannot be targeted by actionscript.

• Pavilion G6 1304SM: not updated for Win10, AMD graphics card causes serious productivity issues

  Hello.

  I bought my laptop around August 2012. A week ago I updated my computer laptop Windows 10 x 64 to Windows 7 x 64 operating system. Then I did a clean install of Windows.

  I got almost all the driver through Windows Update software. However, the driver for my graphics (Intel HD 3000 + AMD Radeon HD M 7450), I received is defective.

  In Device Manager, the AMD graphics card is referred to as "AMD Radeon HD 7000 series" instead of "AMD Radeon HD M 7450" (the way he recalled on Windows 7).

  On the site Web of the product on hp.com, where I used to see a large list of all downloadable drivers, specially designed for this computer, HP only pasted a label reading "Windows 10 drivers can be downloaded via Windows Update."

  Running in graphical mode fixed, AMD is shown with a yellow exclamation point in Device Manager (I tried to update, but it says I have the latest version). I can't disable the Intel card, otherwise I'm stuck with a resolution of 800 x 600.

  In dynamic mode (the one I'm used to working on), I used to set which application uses what GPU via the Catalyst Control Center. However, now when I do that, if an application is set to run under AMD GPU, it never starts. (It will allocate about 30 MB in RAM - visible via the Task Manager - but will not open the main window). If I change the GPU to Intel, the slopes of the app, but under limited return capabilities.

  I use extensively chart AMD. Not being is not able to use it causes problems of great productivity for me. Are there possible solutions for me, not to mention that roll back to Windows 7?

  Hello @tbc3434,

  Welcome to the Forums of HP Support!

  I read your post on the switchable graphics and wanted to help you!

  You can try to download graphics drivers for Windows 7/8.  If you're still having problems, then you can opt to go back to a previous generation option, in your system settings:

  HP Notebook PC - upgrade to Windows 10

  Once you return to your original operating system, check to see if you encounter the same problem. If this isn't the case, then you can consider holding off on upgrading Windows 10 until the drivers can be updated.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• ATI Radeon HD 3200 graphics card causes frequent PC crashes

  Once a week, my laptop HP 6735 b running Vista 64 - bit professional breaks down. Each time, the incident reports Windows says that the problem is related to my graphics driver:

  Look for the updates of the ATI graphic driver

  This problem was caused by ATI Graphics Driver, which was created by ATI Technologies, Inc. Currently, there is no solution for this problem.

  With HP and ATI, I have confirmed that I have the latest version of the driver. The other option which is Windows problem reports offers to downgrade the performance parameters. I tried, but it's really bad. Any other suggestions?

  prn64,
  Here's a couple of thet knowledge base articles contain information relevant to your problem.  Please check these out to see if this can solve your problem.  Let us know if you need more assistance.

  http://support.Microsoft.com/kb/953186

  http://support.Microsoft.com/kb/953026

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• graphic DVT property "DynamicResize".

  Using DVT: graph DynamicResize I have this property, but I'm using the deep venous thrombosis: Graph and I need to use this property, a person s property are in dvt: graph?

  User, tell us your version of jdev, please!

  Conversations using their layout container to resize

  Graphics use configuration management client to control the size of the chart. A chart can automatically adjust to the size of the container of the graph, and the user can resize the chart by resizing its container. You can also specify the size of an array by using the inlineStyle or styleClass attributes.

  Timo

• ADF Mobile Graphics DVT - Zoom does not work

  Hello

  I have developed a mobile Application using JDeveoper 11.1.2.4.0. It has graphics of DVT. The tables are correctly displayed, but I am unable to zoom their Android device.

  I use Android 4.1.2 platform.

  Am I missing something?

  Thank you

  Mehabub

  Hello Mehabub,

  Tables of PST in ADF Mobile 1.1 (with JDeveloper 11.1.2.4.0) does not support zoom and scroll. The features of zoom & scroll will be available in the next version of the Mobile Application infrastructure.

  Kind regards

  -Jan

• Graphics card causing Windows Crash?

  Hello
  So I've had this problem for awhile now...
  I'll be on the desktop and to watch a movie in Media player when all of a sudden my PC would freeze and then get a message saying that my video driver has stop responding and was recovered and sometimes youtube video video/everything on the web is just green. After having this problem for a few weeks I thought I was my driver and decided to uninstall it and stick to what the windows update driver gives me.

  Now on the windows version of the driver, my PC always freezes, but instead of him recovering, I get a blue screen of death.

  Anyone has idea, is my card dying.
  I don't really seem to have problem tho when you play a little here and there.

  I insert my crash report, but I'm new here and I have no idea.

  and decided to uninstall it and stick to what windows update give me driver.

  You better go to the manufacturers support website for your specific PC brand/model and download the latest drivers compatible to them.

  If you have tried without joy, or it was a PC built at home, then go to for your specific graphics card manufacturers website and download the most recent supported (not beta) drivers for your specific graphics card.

• Graphics and video clips

  Hi, I recently changed a battery for my laptop and also got the latest version of windows.  Right after that, I noticed that I don't see that new videos as I used to.  The graphic on the screen becomes messy looking and I only hear the news.  How can I solve this problem?  Thank you for your help.

  Hello

  Try the following.

  Download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash.

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the video play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a command prompt to install the ActiveX component.  Once completed, restart IE.

  Kind regards

  DP - K

• Alienware X 51 new graphics card causing shutdown

  I recently updated my Alienware X 51 with a graphics card than GeForce GTX 970, and now whenever I try to run a game or test the new card my computer completely stop almost instantly. I think maybe it's to do with the power light on the power cable will also turn off. Can anyone recommend a new suitable PSU or other solutions?

  Thank you

  Suggest that you re - post it in the forum of the Club of Alienware .

  Don't forget to include the version of Windows when you post it.

• Gaussian blur causes clip to move

  All of a sudden, some clips - applying a Gaussian blur effect moves it displaces just the clip at the top left of about 1/4... Looks like that it affects some clips, which are not the same size as the projcet, but I'm not sure.

  The thing is that it worked before, so I don't know what happened...

  I'm on Mac OS 10.5.8, Premiere CS4

  Last update of first installed?

  Do not add a keyframe for the opacity no need to tweek, see if this will help.

• Windows Media Player 11 Graphic Equalizer causes Vista audio problems. ___

  When I insert a CD to play, it seems fine. However, when I tear on the hard drive, when I play it, it sounds horrible. The sound fades in and out when I apply the settings of the equalizer, but yet again, this does not happen when played directly from the CD.  I tried to update the drivers, but it does not help. Any rip format I use, or audio quality I use, this is the case. I tried 4 different suppliers: eMachines, Dell, HP, and Compact. The same problem exists. I even tried different sound cards without success. This would lead me to believe that this is a problem with WMP 11, himself.

  Does anyone have a solution to the problem?

  Thank you for your time.

  Hi Karthik,

  The problem started when I switched from XP to Vista. WMP never worked properly on any Vista machine I've tried from different suppliers.

  I found a resolution. I use Itunes instead. It doesn't have the same question.

  Thank you for taking the time to answer.

  Best regards

  Sean

• How to create graphic menus to context right click for ADF DVT?

  ADF DVT graphics supports right-click context menu?
  If so, how to create it for the ADF graphic DVT?

  What version of JDeveloper are you using?

  This feature is a new feature that is available only in JDeveloper 11 g R2 (the more recent)?

  Thank you
  Nini

• Update: problem HP 4540 graphic s AMD Radeon HD M 7650

  Update (September 23)

  Understood graphic will only switch when the AC is plugged on and laptops running on battery. While the battery is in the ac is plugged in, it won't switch. (AC in + battery or.)

  How does it eat for only on battery + after closing the game-> blue screen come to 100%.

  (I don't know he's trying to return to the HD 7650 and somehow, it does not support.)

  _________________________

  Hi there, hope you guys can understand something... so far, I have tried everything to my knowledge.
  
  First the Specs:
  
  HP ProBook 4540 s (C5E12ES), 15.6 ", Core i5 - 3210M 2 x 2.50 GHz, 6 GB, 750 GB, AMD Radeon HD 7650 M 2 GB

  (integrated HD 4000) (pre - install OS > SUSE 11)
  
  Current OS: Win 7 Professional 64-bit
  
  Problem:
  
  Installed in almost all of the drivers that were available here:
  
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en & CC = US & TaskID = 135 & prodTypeId...

  (ofc. for w7 64-bit; and they claim to work)
  
  But he never passed to the Radeon HD 7650 M no matter what I attributed to the AMD Catalyst (High Performance) + energy Max Power Mode (also checked the option all have been set for maximum power).

  So, basically, the problem is that the discrete Radeon HD 7650 M graphics card is never available. I tried to disable in the BIOS "Switchable Graphics" Mode > causes only that the HD 7650 M is not yet visible in the Manager of hardware + not available + catalyst shows that it is working properly. (+ there is no Option that worked to manually assign the gpu)

  Given that the system must be a switchable dynamic AMD chart , I can not even download other drivers than those offered by HP (won't work of course...).

  > > In games only the HD 4000 is visible (even when the 7650M is completely disabled games and videos run with HD 4000 > > who said so far only one has been used (I wanted to clarify that since some think that the HD 4000 is supported "in the background" by the discrete gpu-> is not!))

  There there no driver to manage the 7650M atm? As far as I read Sony handled somehow this problem for their products with the material mentioned above. Also tried to remove all the drivers and installation only AMD (not a good idea... no drivers of Intel HD nothing worked - well, since only this integrated gpu was his work so far).

  Oh almost forgot... the BIOS preinstalled is somehow a newer version than that offered on the section driver for hp 4540 s:

  BIOS version: 68IRR worm. F.02, 27.07.2012

  SMBIOS: 2.7

  So useful I can provide screenshots. (Side-Note: Notebook was released as this month, I guess).

  Thanks for any help/advice in advance.

  Maybe useful references:

  http://www.manualowl.com/m/Hewlett-Packard/ProBook-4540s/manual/277780?page=39

  (only page 39)

  Probably useless Info:
  Tested the system also with 3d-mark-11 > preset he advances to 'High Performance' (in the catalyst) I was surprised how the test is run (results looked like 10-20-times "less" than the average same gpu (7650M) < also it was the first time I saw a program used the discreet gpu.)

  > "Message:"... the graphics driver was not accepted. I can assure you that.

  What also bothers me is the fact that some hardware probably 4000HD Intel is really buring stable around 122-130 ° C (even if the laptop is not hot at all - maybe that the sensors are nuts...)

  

  Switching problem SOLVED!

  Because it works battery with the graphics mode I again probably energy options that can interfere - checked all and found one that blocked the graphics of switching:

  > Click on the stack > energy Options (for the regime) > improved energy options > check all entries there are 3 that may conflict with the power:

  > Set the switchable dynamic graphics for battery and ac automatic
  > Set the gpu power plan intel for performance max ac (or both - if you want to)
  > Set the ATI Powerplay - Options for optimal performance / max
  
  ! Also check that you have set the application/game to HIGH Performance in your
  Catalyst Control Center (+ do not turn off the Power Play Option in Catalyst Control Center)

  (+ do not forget after passage of balanced high-power or energy saving these entries must be defined as well)

  ↑ graphic will pass!

  ! Rest, the computer will always be bluescreen then (maybe this can also be solved by playing with the Options of energy.

  ! Also remember that applications/games will still show that you can select the HD 4000 only, but will switch discrete gpu (7650M HD). More FPS + better graphics that will prove also.
  

  Screens to make it easier to understand:

  

  

  

  

• Equium A110-252 - can I update the graphics card?

  Hello

  I can't play my new Sims 3 on my Toshiba Satellite A110-252. Went to PC world who told me that I need a new laptop computer because the graphics card I can't deal with my new game and the card is not extensible. Anyon know if this is correct?

  I know I can improve memory in a 4GB, but they say it's the graphics card causing problem.

  Many thanks to anyone who responds x

  Hello!

  I think that the authorized service provider is good and the graphics card can't be upgraded. It s soldered on motherboard and nontradable. :(
  If you believe n t, please read this link from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  If the graphics card is not fast enough, an upgrade of RAM can t help you.

  Good bye

• Applying the addEventListener method to the Clips using a variable for example appoints

  This project is in HTML5 Canvas using Javascript in Adobe animate.

  I have a lot of movie clip symbols of film, all with a single instance (for example name ('arms', 'head', 'leg', 'foot', etc.). I also have a display of graphics and text clip ("text") which has a keyframe labeled corresponding to each of these symbols instance names. When a symbol is clicked, I want the clip "displayText" to access the appropriate section.

  There are a large number of these clickable symbols in each of several animations, so I definitely want to be able to do this in a way auto-tableau, it is too many to write code for each.

  What I have is this:

  var objects = ['arms', 'head', 'leg', 'foot'];

  var clickObject = null;

  for (i = 0; i < objects.length; i ++) {}

  clickObject = (objects [i]);

  clickObject.addEventListener ("click", displayText.bind (this));

  }

  function displayText() {}

  this.displayAndSound.gotoAndStop (clickObject);

  }

  Console says "clickObject.addEventListener is not a function", and I have tried many variations of the scope, using onClick rather than a listener events, etc, etc. What I am doing wrong - something to do with the scope? Something to variables vs channels? Something to do with how javascript regarding instance names? Legally binding?

  I can get it works fine outside of the loop, using names of the current instance, fixed, so hopefully it's a clue to what goes wrong...

  Any help much appreciated.

  Look at what you do in the loop. You do not clickObject for an object reference, configure that you just want it set to a string value.

  Assuming that the objects are at the same level as the code, you should do instead:

  clickObject = this [object [i]];

  Property accessors - JavaScript | DND

  In addition, your event handler probably don't do what you hope, that he will, because the value of clickObject will be just what you set to last in the main code. You may need to use the event object.

  EaselJS tutorial: Mouse Interaction

  EaselJS v0.8.2 API Documentation: MouseEvent