graphic DVT property "DynamicResize".

Similar Questions

• ADF Mobile Graphics DVT - Zoom does not work

  Hello

  I have developed a mobile Application using JDeveoper 11.1.2.4.0. It has graphics of DVT. The tables are correctly displayed, but I am unable to zoom their Android device.

  I use Android 4.1.2 platform.

  Am I missing something?

  Thank you

  Mehabub

  Hello Mehabub,

  Tables of PST in ADF Mobile 1.1 (with JDeveloper 11.1.2.4.0) does not support zoom and scroll. The features of zoom & scroll will be available in the next version of the Mobile Application infrastructure.

  Kind regards

  -Jan

• Graphic cursor property

  My chart of waveform has two graphs overlaying each other.  The chart has two sliders of mult-land.  Each slider look a different terrain. I tried to use the node property to move the cursor, and it seems that the sliders will go for a fraction of a second and go back.  Why is this?  How to fix this?

  Also, on the slider of Leticia, all I care about is the values of x to each slider.  Is there a way to format the legend as follows?

  cursor of 0 x 1

  cursor 1 x 2

  See attached VI.

  For me, multi-terrain mode is enabled for all the 3.  However, all 3 options have the same problem.  The cursor will move to the set point of the property node and go immediately back.  I played a little with her as a little bit more and I realized that the problem is related with the setting of the watch.  Once I get rid of this, it seems to work fine.

  I ended up using the mixed signals chart, which displays the coordinate x slider without the option to look at.

• active route graphic XY property settings not working not

  I put the xy chart mapped properties manually, and they seem to work. However, when I try to set them in the program they go back to manual settings. What is going on?

  

  I went to the chart and fact plot legend visible and extended a parcel to 3. This is what I did. Now, it seems to work correctly. It's been a long time that I had to really know fancy with a chart, but I don't remember having to do this. My memories of graphic properties were that they were a little more dynamic.

• Carousel graphics DVT causes clipping.

  Dear all,
  
  Use case:
  I put a graph of deep venous thrombosis within the ADF carousel component and I thought that it is easy to do but I currently encounter some problems when it comes to the layout.
  
  Please see this image http://imageshack.us/photo/my-images/338/dvto.jpg
  
  As you can see, the graph is "clip" and does not display the entire image. According to the documentation, point carousel extends automatically to its child element.
  The carousel component itself must be stretched by the panelstretchlayout. But the project itself, you will notice that the carouselitem does not stretch her child which is in this case a graph of DVT.
  
  I downloaded a test project sample here for you to try http://my-dev-projects.googlecode.com/files/DVTCarousel.zip
  
  Not sure if there is no work around for this.
  
  Hoping for some DVT experts look at this please.
  

      <af:document id="d1">
        <af:form id="f1">
          <af:panelStretchLayout id="psl1" dimensionsFrom="children" styleClass="AFStretchWidth">
            <f:facet name="bottom"/>
            <f:facet name="center">
              <af:carousel id="c1" value="#{viewScope.SampleBean.dummyList}"
                           var="item" contentDelivery="immediate" >
                <f:facet name="nodeStamp">
                  <af:carouselItem id="ci1" >
                    <dvt:lineGraph id="lineGraph1" subType="LINE_VERT_ABS"
                                   shortDesc="Sample"
                                   tabularData="#{viewScope.SampleBean.tabularData}"
                                   contentDelivery="immediate">
                      <dvt:graphTitle text="#{item.title}"/>
                      <dvt:background>
                        <dvt:specialEffects/>
                      </dvt:background>
                      <dvt:graphPlotArea/>
                      <dvt:seriesSet>
                        <dvt:series/>
                      </dvt:seriesSet>
                      <dvt:o1Axis/>
                      <dvt:y1Axis/>
                      <dvt:legendArea automaticPlacement="AP_NEVER"/>
                    </dvt:lineGraph>
                  </af:carouselItem>
                </f:facet>
              </af:carousel>
            </f:facet>
            <f:facet name="start"/>
            <f:facet name="end"/>
            <f:facet name="top"/>
          </af:panelStretchLayout>
        </af:form>
      </af:document>

  Is there a solution?
  
  Thank you.
  
  JDEV 11G PS5

  You do reverse autour. You must keep the carousel in the Center facet. To move it to the top you can put another panelStretchLayout in the lower as facet:

  One of the problems is that the bargraph needs a display height and your test data do not reveal the height needed to display correct. I put the panelGroupLayout to scroll to get a scroll bar if the remaining space on the page is too small to display the entire chart.

  Timo

• How to create graphic menus to context right click for ADF DVT?

  ADF DVT graphics supports right-click context menu?
  If so, how to create it for the ADF graphic DVT?

  What version of JDeveloper are you using?

  This feature is a new feature that is available only in JDeveloper 11 g R2 (the more recent)?

  Thank you
  Nini

• value of series < dvt:barGraph >

  Hello

  I have graphic < dvt:barGraph > that I have to show the value of the bar above it in the graph. Any solution?

  < dvt:barGraph id = "barGraph1".

  value = "#{bindings." ThreeDEffect BiGaugeAssignmentView.graphModel}' = 'true '.

  animationOnDataChange = "activeData.

  animationIndicators = "ALL".

  animationOnDisplay = 'auto '.

  dynamicResize = "DYNAMIC_SIZE".

  inlineStyle="width:100.0%; »

  >

  < dvt:background >

  < dvt:specialEffects / >

  < / dvt:background >

  < dvt:graphPlotArea / >

  < dvt:seriesSet >

  < dvt:series >

  < dvt:specialEffects id = "specialEffects1" / >

  < / dvt:series >

  < / dvt:seriesSet >

  < dvt:o1Axis / >

  < dvt:y1Axis / >

  < dvt:legendArea automaticPlacement = "AP_NEVER" / >

  < / dvt:barGraph >

  Made by property

• JDeveloper 12 c: cannot display the split in dvt:projectGantt task

  Hello

  I'm working on graphic dvt:projectGantt with sub tasks and divide the tasks using Jdeveloper 12 c (12.1.2.0.0).

  Initially the sub tasks were not displayed. Using

  ADF 12 c bug & amp; #8211; Unable to display Gantt chart with subviews correctly in ADF 12 c | kBLOG

  I found the solution to display under tasks.

  But I couldn't split in the graphic tasks. I need to change any property for split tasks?

  Thank you in advance,

  Usha

  dvohra21,

  The link you mentioned above is just saying that how to create Gantt charts (project, use of resources and planning). In my case, split the tasks and the dependent tasks displayed in the graph. But when you add under tasks, the split and the dependent tasks were not displayed.

  I solved this problem by using view separate query object based on the subtasks. Before this fix, I used object unique view to display the tasks and subtasks in project Gantt chart.

  I am facing another issue. I printed the lap time on the conduct of split operation in project gantt chart. Split a task into two using split of the toolbar image, it prints the mean date of this task. But on clicking right button of the mouse and select split option, it prints the date that I did a right click on the task. But I do not get the precise date several times.

  Please give some ideas to solve this problem.

  Thank you in advance,

  Usha

• Property names of waveform graph

  I want to choose between the two types of axis on my x waveform table.

  (1) absolute time---> time--> AM/PM and HH Custom Format: mmS

  (2) IF the rating to 3 digits (digits precision) and hide the trailing zeros selected.

  Anyone know the names of the properties of these attributes of map of waveform? I tried to look in the list which arise when you make a graphic waveform property node. But I could not find. I think I certainly lack.

  BTW, I have 2 waveforms on the same list of waveform.

  What you want, it's XScale.DisplayFormat.Format, XScale.DisplayFormat.Precision and Xscale.FormatString. To see the correct format strings, you can right click, select Xscale > set form and in the Properties window, select the Advanced Editing Mode.

• problem with the history of EEG waveform data

  Hello world:

  I use SIT to create a user interface in Labview to communicate with a simulink model. After I configure the SIT connection manager and run the vi, the output was displayed in waveform graph.

  Now, I want to get all the data in the history of the map of waveform. I tried to use the graphic story property node to access the whole of the historydat. But nothing copied in the part of Y in the front of the cluster of waveform...

  Can someone give me a helping hand on what is the problem? or has anyone encounter the same problem when you use SIT.  I am really confussed...

  I've attached the vi, but to run the vi, you must have a simulink model corressponding and SIT, so I'm really sorry that you can not run it

  And thanks a lot a lot a lot for that.

  / Shangning

  I just realized this data is a 2D waveform table, which contains the waveform 2000 * 1, and each waveform data contains only 1 value of Y.

• Wavelet transform scalogram frequency scale

  I've read all the posts on this topic and found no answers, that would be useful for me. However, I found a formula to convert pseudo frequency scale. My client wants scalogram with the y-axis as the frequency of the signal and x-axis as of the time of the signal. I tried to use the multiplier of the graphical indicator property but I can't get the correct values of the frequency in the Y axis. The formula I use is f = Fw / (dt * s) where f is the frequency of nickname, Fw is a center frequency of the used Wavelet (Morlet), dt is sampling the signal time and scale. FW is 0,8125 Hz (at least that is what Matlab tells me), dt is 0.01 s (100 Hz aqusition), the scales are numbers from 1 to 128. Basically I wan't to know how to convert the graphical indicator scale. I drew the correct chart in Matlab, but I must do the same in Labview. I have attached two screenshots.

  Hello

  Well, you can use the property nodes in order to change the scale.

  If you right-click Scalogram, create, property node and you choose the multiplier and offset.

  You simply calculate the offset, it is about 80,61 and the multiplier is on-0,63. And you calculate scale of nickname.

  The use of knots of property you can change a large number of parameters for the scalogram.

  Hope that solves your problem.

  Kind regards

  Ion R.

  P.S. As LabVIEW is an engineering environment, it is not so obvious how you can reverse time :-) (or frequency)

• How to empty the group clear chart history labview 2011

  Hello

  Can someone help me?

  How to clear history of cluster diagram data using labview 2011

  Hi qbell,

  the example is suitable for any type of graph. Just wire a table empty clusters or, even easier, create a constant to your graphic story property node.

• Front Position Confusion

  In my program, I have several graphic wavefrom; I would call a reentrant Subvi, dialog is to say little, what "appears" on each chart, see attached picture.

  I would like to define dynamically position the dialog box must match the waveform card. However, I feel very difficult to make any sense of the position, the limits of the façade, the graphic position property nodes. I thought that if I set the position of the front in my dialog on the position of tracing, would align the upper left corner. However, this does not work for me.

  Any help would be appreciated.

  See you soon,.

  Andrew

  I am attaching the 2 screws which I hope will help, if I understand what you want.  It is extremely sloppy and incomplete, but the idea is good.  You click on the graph and text appears in the upper left corner of the graph, no matter where the graphics window is on the screen.

  The position of the graph in the control panel will not change when the window is moving, because the position of the chart is compared to the window that contains.  So, you can use the graphic as a lag compared to the position of the window to find the position of the chart in real coordinates, then serving you the position of your pop-up.

• On the graph and the trace of the 'other values '.

  Hi all.
  
  Currently using Apex 4.1
  
  Suppose you have a pie chart and want to just draw the first values of n, say the top 5 customers, and then group those remaining on a silce. Indicating that perhaps the rest are without interest to you. Group them under 'other '.
  
  Which is possible some graphics manipulation property or what I need to solve this problem on a query somehow...?
  
  Can someone give me a clue...?
  
  Thanks in advance...!

  It can be done in a query using rank().

  Basically classify you your groups and then do something like:

  Select
  cases where to classify<=5 then="">
  else 'other '.
  as the_groupings,
  Sum (mycounters),
  ...
  ...
  ...
  ...
  Group
  cases where to classify<=5 then="">
  else 'other '.

  Thus, myKey would be albums/clients/groups of names in the data, while the rest would be labeled as 'other '.

  Not sure of the syntax of details (I'm sure it will be difficult) but the method must be healthy.

  HTH,
  John

• No puedo configurar Red

  Amigos como estan, estoy probando vmware workstation 7, lo he instaldo in mi pc no con windows 7, ahora una nueva mv in the cual cree instale winxp, pero desde ahi no puedo access a red mi, como is debe configurar correctamente para poder access vmware a mi red, which are the difference between Bridged exacta: Conecct directly to the physical network (State of the repeated physical network connection) NAT:, the host only, including custom.

  In mi portatil tengo the Red ethernet card y una inalambrica.

  I hope I can help a ver como puedo did mi problema

  Saludos

  Hola,

  you tell the difference between different las redes en workstation types (there are products of vmware in general).

  -Bridge: The Escalin Máquina virtual vnic're como if estuviera conectada directly did you red lan una las tarjetas physical traves of you pc ethernet.

  -Host only: solo unit privada permite between you pc is the virtual machine. The Máquina virtual debe estar configurada para as obtenga su por dhcp IP.

  -Nat: Join the virtual machine has the Red through una fisica graphical intellectual property of you CP. The Máquina como el caso anterior debe tener vnic en modo dhcp para as obtenga the IP of you virtual pc.

  A traves del "Virtual Network Editor" in menu Edit para configurar el Québec interfaces physical for you pc to ponen in modo bridge. Estas interfaces physical en modo bridge need asociadas sus respectivas interface dentro del workstation office. Lo mismo pasa don't con las interfaces Office NAT. The graphical hostonly en verdad no tiene knew pareja a nivel fisico.

  Resumiendo para tus maquinas office tengan unit need than tener associated with una virtual graphical in modo bridge o NAT. having into account las particularidades del bridge y del nat y the topologia of you red. If for example you en lan is a dhcp server/service than asigna IP of forma dinamica estoy obligaria for example if usas una graphical en modo bridge a (the mv dentro) configurarla en modo dinamico (dhcp).

  Of momento con todo lo I think you explained you can start a hacer alguna cosilla he

  Todas maneras yo you recomendaria that con tranquilidad is calma vayas haciendote con el workstation using y del mismo documentation comments:

  http://www.VMware.com/support/pubs/ws_pubs.html

  Workstation manual led by a buen punto partida are el User.

  Espero ayuda sido acercado

  Best wishes / Saludos.
  Pablo

  Please consider awarding

  any useful response. Thank you!! -

  Por favor considered premiar

  Las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog