Graphics card causing Windows Crash?

Similar Questions

• HP Pavilion DV6-C80EL HD 7690 M XT graphics card. Windows 7 64-bit operating system

  I have a PC HP Pavilion DV6-C80EL, with HD 7690 M XT graphics card. Windows 7 64-bit operating system

  B0B34EA TYPE S/N {removed privacy}
  I have try the card READER was updated to use windows 8
  HP told me to turn to AMD.
  AMD housewrap me to turn to HP.
  What should I do?
  THE PC was purchased in June 2012.
  Thank you

  HP has released a disc for the PC in question, associated with 64-bit Windows 8
  Greetings

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132 & LC = IT & CC = IT & DLC = IT & sw_lang = & Product = 5212723

• HP Pavilion dm4: graphics driver Intel & AMD causing Windows Crash

  Hello.

  My laptop is

  HP Pavilion dm4-3107tx Beats Edition Entertainment Notebook PC.   I tried to install the graphics drivers from this link:

  http://support.HP.com/ph-en/drivers/selfservice/HP-Pavilion-DM4-3100-beats-Edition-entertainment-not...

  but I could not install the graphics card intel. It is said that the cell does not meet the minimum requirements of the graphics driver.

  I also tried to install AMD and he did. But every time that I reboot, Windows startup crashes.

  I also noticed that results for starting blocked when I recently updated my Windows, including the update for the driver intel which I have not yet installed (because I know that once I did, I do a lot of recovery and repair of the system for the umpteenth time).

  And now I feel really stressed out about it because I've been formatted my laptop for the second time, and the last time it was with the release of the pilot intel. I was stuck again started back and I got really tired of him.

  I really need help with that.

  What I have to install ALL the drivers in the link before installing graphics drivers to ensure that graphics drivers will install?

  Hi @katrinahahaha,

  Thank you for your query.

  I understand that you have a problem installing your graphics drivers.  After formatting the drive and installation of the Intel graphics driver, you have a problem starting.  Did you use the Recovery Manager to format and reinstall Windows 7?

  You only need to install the driver AMD of the HP driver page because it contains the two pilots.  Please try this process:

  • Uninstall and remove two graphic drivers
  • Restart your laptop
  • Run the HP Support Assistant to help find and install the graphics drivers
  • You can also after the uninstall, remove the driver and restart, download and install just the driver AMD.

  HP Support Assistant

  If this problem persists, try removing both drivers and using the Recovery Manager to install the drivers:

  Computers HP - using Recovery Manager to restore the software and drivers (Windows 7)

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

• Pavilion G6 1304SM: not updated for Win10, AMD graphics card causes serious productivity issues

  Hello.

  I bought my laptop around August 2012. A week ago I updated my computer laptop Windows 10 x 64 to Windows 7 x 64 operating system. Then I did a clean install of Windows.

  I got almost all the driver through Windows Update software. However, the driver for my graphics (Intel HD 3000 + AMD Radeon HD M 7450), I received is defective.

  In Device Manager, the AMD graphics card is referred to as "AMD Radeon HD 7000 series" instead of "AMD Radeon HD M 7450" (the way he recalled on Windows 7).

  On the site Web of the product on hp.com, where I used to see a large list of all downloadable drivers, specially designed for this computer, HP only pasted a label reading "Windows 10 drivers can be downloaded via Windows Update."

  Running in graphical mode fixed, AMD is shown with a yellow exclamation point in Device Manager (I tried to update, but it says I have the latest version). I can't disable the Intel card, otherwise I'm stuck with a resolution of 800 x 600.

  In dynamic mode (the one I'm used to working on), I used to set which application uses what GPU via the Catalyst Control Center. However, now when I do that, if an application is set to run under AMD GPU, it never starts. (It will allocate about 30 MB in RAM - visible via the Task Manager - but will not open the main window). If I change the GPU to Intel, the slopes of the app, but under limited return capabilities.

  I use extensively chart AMD. Not being is not able to use it causes problems of great productivity for me. Are there possible solutions for me, not to mention that roll back to Windows 7?

  Hello @tbc3434,

  Welcome to the Forums of HP Support!

  I read your post on the switchable graphics and wanted to help you!

  You can try to download graphics drivers for Windows 7/8.  If you're still having problems, then you can opt to go back to a previous generation option, in your system settings:

  HP Notebook PC - upgrade to Windows 10

  Once you return to your original operating system, check to see if you encounter the same problem. If this isn't the case, then you can consider holding off on upgrading Windows 10 until the drivers can be updated.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Satellite A200-1AX - overheating of the graphics card in Windows 7 64 bit

  Hello.

  Model of my laptop Satellite A200-1AX possessing a Mobiliti Radeon 2600 video card.

  After installing Windows 7 64 bit can't find the correct work display driver.
  Fan does not work quickly, by the suite and heavy applications is overheating and the laptop is turned off.
  Not able to find a driver for Windows7 64 bit or Vista 64-bit for my card on the Toshiba site.

  The site of AMD.com a driver for Radeon 2XXX series:
  Windows 7-64 bit ATI Catalyst a? ¢ Display Driver Version: 9.9, Edition Release
  Date: 09/09/2009. -Drivers do not help.

  I tried to increase the fan speed you programs 'ATI Tray Tools', has not helped.

  Please help me with my problem. Sorry for my English

  Hello

  The drivers of Toshiba laptops are a bit different and not the same thing as the drivers from the manufacturer of the graphics card.
  The original ATI drivers are made for office use and not for mobile use. Drivers Toshiba takes supported thermal protection that allows to control the performance of gpu and the dissipation of the heat.
  If you want to use a page ATI driver then your GPU could create more heat as usual which leads to the unexpected shutdown.

  I installed Win 7 on my A210. I didn't install the driver of ATI graphics card because the Win 7 automatically recognizes the graphics chip.
  After installation, I went to the Device Manager. Then, I chose the graphics chip and looked for the driver automatically. Windows has found the right driver and installed this
  Since the unit works perfectly with Win 7

• HP Pavilion 500-130DE: HP Pavilion 500-130DE do not see the graphics card in windows and can not change the primary graphics card.

  So I got a new (TG 640) graphics card for my pc. I tested it on another computer the day before. Worked well. I plugged my HP Pavilion 500-130DE and started. I changed my slot onboard DVI cable to the GT 640 and cable says no signal. While the pc was still on I switched the cable back to the integrated graphical location motherboard and got the windows login screen. So I thought that BIOS yet configured when the integrated graphics card (Intel HD 4600). I turned off the pc and booted to BIOS. But I've never seen a such limited BIOS before! Only thing you change is boot order. I saw a tab advanced but could not find the settings that I needed. In the only device manager devices that appears is the HD 4600. So I checked power is 300W should be sufficient for a map of 75W (only need the PCI for power). Someone knows how to fix this?

  Hello

  After the PC starts to open the window RUN and enter: MSINFO32

  If the BIOS on your PC version is version 8, and then review the information below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  A word of warning: the reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  Thanks for posting on the forum.

• HP Envy 700-074 Graphics Card problem Windows 8

  Greetings,

  I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).

  Initial setup went fine without any problem.  I replaced the power supply so that I could add the graphics card from my old computer.  The power supply and graphics card worked perfectly for my old computer.  Feeding is a BFG Tech GX 550 watt modular power supply series.  The graphics card, I have installed is the Nvidia 560ti.

  The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally.  However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer.  I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup.  I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal.  I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).

  I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly.  My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer).  However, number of monitor 1 is listed as monitor of generic cards.  Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows.  I also tried to disable, but the problem persists.

  I guess that there is a conflict between the integrated graphics card and the Nvidia card.  However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.

  Hello:

  Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?

  If this isn't the case, please read the info on the link below.

  http://support.HP.com/us-en/document/c03653200

• Satellite L655 - 19 H - need driver graphics card for Windows 8

  Hello!

  I have a problem with VGA drivers on my L655 - 19 H in Windows 8. Latest drivers on the Toshiba site only for windows 7 and will not work with my W8.

  I install the drivers manually, but some games say "bad video card drivers. Microsoft drivers not work too.

  SRY for my English.

  Problem is that this older machine is not supported for Win8 Toshiba doesn t no matter what driver supports this. I tried to check if another machine support has the same graphics card but unfortunately it s not the case.

  Sorry, but I can't find anything.
  Have you tried to check the GPU manufacturer s page? Your laptop's ATI Mobility Radeon HD 5650.

• update graphics card for Windows 7

  I just updated my computer from Windows XP to Windows 7. My graphics are blurred, and I can't set the resolution properly. I think I need an update for my graphics card. Help?

  Post here instead, please: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware

• Error on blue screen and missing or invalid or component file causing Windows crash.

  Original title: missing or invalid files or components.

  Missing or not valid file or item causing windows/internet to freeze and crash. A BSOD (blue screen) shows a second and the computer restarts back on the desktop with no other problems. This happens only when I open/close a video too fast or I use some (L100 - 30 Hercules) aircraft in FS9. All other devices work fine. I sent an error report to Microsoft tonight when this happened. It conrcerned 2 files in C:\ Docs & Setting\All Users\Application data\Microsoft\Search\Data\Applications\Projects\System Index\System... (couldn't do the rest, but we had to do with the XML extension..) I am using Windows XP Pro with Service pack 3 and all updates.

  Is there a simple solution for this? I don't want to reinstall XP if I don't have, as my drive my being corrupt. I'm not sure. I also used some older programs that I have used for years that run fine on XP but will not work in Windows 7 even with Virtual XP Mode installed.

  Hello Joel S

  I had already tried this and it was not a hardware failure. I ran chkdsk and the player revealed a good with no bad sectors. I also use Belarc COMPUTER management systems that manages the health of smart HDs (HDs most have this 'Intelligent' ability). The problem was some legacy software that I thought that I had taken when I did a removal of the program. He left 5 pieces of something that is called «online...» "I found it using Malwarebytes, and he was buried deep in the registry. The program was "Cliffs of Dover" a stream online to run the program. Once you have downloaded the game was the only way to use it online, which took 20-30 minutes to load and once loaded would break your system if you have tried to play. Shame, it's a beautiful CFS, but way to buggy.

  In any case, removed from the basket with Malwarebytes and every thing works fine. No more accidents.

  Derek

• graphics card for windows vista

  I upgraded my computer to Windows Vista, and I can't find a compatible graphics adapter

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to find compatible graphics card drivers. I'll be happy to help you on this question.

  1. What is the brand and model of the computer?
  2. What is the accurate and complete error message you get?

  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  The information is not sufficient to answer your question. Answer us with more information by answering the above questions.

• Alienware X 51 new graphics card causing shutdown

  I recently updated my Alienware X 51 with a graphics card than GeForce GTX 970, and now whenever I try to run a game or test the new card my computer completely stop almost instantly. I think maybe it's to do with the power light on the power cable will also turn off. Can anyone recommend a new suitable PSU or other solutions?

  Thank you

  Suggest that you re - post it in the forum of the Club of Alienware .

  Don't forget to include the version of Windows when you post it.

• ATI Radeon HD 3200 graphics card causes frequent PC crashes

  Once a week, my laptop HP 6735 b running Vista 64 - bit professional breaks down. Each time, the incident reports Windows says that the problem is related to my graphics driver:

  Look for the updates of the ATI graphic driver

  This problem was caused by ATI Graphics Driver, which was created by ATI Technologies, Inc. Currently, there is no solution for this problem.

  With HP and ATI, I have confirmed that I have the latest version of the driver. The other option which is Windows problem reports offers to downgrade the performance parameters. I tried, but it's really bad. Any other suggestions?

  prn64,
  Here's a couple of thet knowledge base articles contain information relevant to your problem.  Please check these out to see if this can solve your problem.  Let us know if you need more assistance.

  http://support.Microsoft.com/kb/953186

  http://support.Microsoft.com/kb/953026

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creation of Blu - ray causes windows crash blue screen

  I'm testing the first Elements 7 for the creation of better quality DVD and Blu ray discs. Source is AVCHD 1920x1080i and I managed to create a number of DVD and a Bluray without problem. My last try creating a Bluray disc failed at about 98%, burn underway with an error of the device. As a result, a windows blue screen crash. Much more worrisome is that if I re - insert the BD RE disc in my PC to erase it and start over, he immediately requested a windows blue screen crash, so I assume that the disk is in ruins. I've used Premiere Pro, Ulead and more recently Cyberlink Power Director and Sony Vegas. The quality of images DVD produced by the Prime Minister is far superior and the output Bluray was also excellent. CyberLink has proved to be a flat good package of the poor quality of the re-output stream. Sony Vegas Pro seems the only one to recognize raw images of AVCHD and choose of does not recompress it! The version of Movie Studio does not seem to do that, however, I only got a limited trials go. I narrowed my choice to upgrade to Adobe first, or the cheaper 7 elements that fits my needs for the home movies, however, has a major accident of windows, that I never tend to get scared me. Why o why is there not a burn to the option of hard drive for creation concerning the Bluray DVD? Someone has a similar problem - any ideas as to what I might try?

  A situation of BSOD normally indicates something is not systemicly with the computer. It may be a software (usually BONES), or related equipment.

  The first thing I would do would be to gather all the info on your system and full list OS, version, updates, etc. and all material specifications. Something in these lists might be a clue.

  Then I would look carefully at the observer of events, in particular the tabs system and Applications. Look for the yellow warning at the time of the BSOD messages and especially the red error messages. It might be easier to invoke a BSOD, so that you know the exact time and date of the accident. Carefully consider each yellow and each message in red. Many might not give much useful info, but some could talk you a lot about what happens and can even give you the cause. Please explore all the links that are provided in each of these messages. They should take you on either the website of MS, or on the site of a software or hardware of the company. These will probably be where you will collect the most important data.

  Here's what to look for in the event viewer:

  

  Give us all the details which is is found.

  Also, see this LINK. The video is a little long, but will provide you with a lot of troubleshooting advice and also tools of notes MS. Make of these tools and their use.

  Good luck

  Hunt

• XP Mode in Windows 7 does not detect the ATI Radeon graphics card

  Hi, on windows 7, xp (virtual), the system mode does not detect my graphics (ATI Radeon HD4530). This card is indispensable to run a business application (multimedia program). Can you please help me.

  Thank you, Christian.

  * original XP mode with title - __Windows 7 - (virtual) with ATI radeon HD4530__Christian.* graphics card

  Windows XP mode provides a virtual hardware platform to run XP programs.  With the exception of some USB devices, it does not provide a direct access to the hardware on the host computer.

  If you need to use your real graphics hardware in XP you will probably have to put in place a system to dual-boot and boot XP when necessary.