Similar Questions

• WRT54G can not reset or see the config page.

  Hello. I have a wrt54g that I have configured previously, including wep and mac filtering.

  I have access to the internet.

  Today I noticed that I can't access router config (checked 192.168.1.1 is worn by ipconfig/all).  I tried to connect both wifi and ethernet with disabled wifi.  Under firefox and IE tells me the config page could not load, server not (or order) answer.

  No password or logon screen fails just load the page.

  I tried to reset the router by unplugging the router and all the cables of e'net. I pressed the button of reset for 60 seconds.  When I reconnected it it has rebooted without any reset... he had the same SSID and WEP key. ?????

  At first I thought it was a problem of W7, because I just upgraded, but I can't reset or access to the page of Firefox, chrome or my iphone. Maybe the router is bricked as config is concerned.   ?

  Any suggestions?

  What you have said above, you pressed the reset button with the unplugged router.  That will do nothing.  Plug in the router and wait 60 seconds.  With the power on, press and hold the button of reset for 30 seconds and then release.  Wait 30 seconds and now the router power cycle.  Connect with your wired computer to 192.168.1.1 empty user name, admin password and reconfigure.

• Access Point WRT1900AC & Firmware version: 1.1.10.167514, it cannot be accessed the config page.

  Hello!

  I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
  Firmware version: 1.1.10.167514
  Release date: June 30, 2015

  My WRT1900AC is configured as a wireless gateway.

  https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286

  Also, I have disabled firewall and uPnP.
  A tutorial here:

  http://www.Linksys.com/us/support-article?articleNum=140371

  Everything works except that without access to the router config page.

  The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP

  (after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.

  Yesterday, I spoke with live chat. I received recommendations:
  "Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the

  WRT1900AC will be his disabled DHCP. »

  I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
  Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of

  fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
  Otherwise everything works well and stably.

  inspire wrote:

  Hi chadster766!

  Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
  If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)

  IP address of the router (LAN):

  Connectivity-online-online details router LAN => Edit

  * If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2

  Bridge mode:
  Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode

• How to disable the start page promotions?

  Whenever I start Firefox, I am taken to the Start Page of Mozilla Firefox.

  By default, the page displays the Firefox logo, a search bar and the footer of downloads, bookmarks, session of previous restore button button, etc. However, Firefox logo occasionally goes to a "promotion" of all kinds, things like FoxYeah or more recently some videos, and a line of text speaks of promoting appears under the search bar.

  Is there a way to disable these promotions?

  Thank you in advance to stakeholders of all kinds.

  This is a setting advanced; image.animation_mode = once

  Type of topic: config< enter > in the address bar.
  If a warning screen is displayed, press the button to be careful .
  That's where Firefox considers the information he should run.
  At the top of the screen is a search bar. Type image.animation_mode

• How to disable the home page when popup is opened?

  Hello

  With the help of Jdev 11.1.2.3

  I have two buttons on each row in a table that open pop-up windows.

  If I open one of them (say p1), I can still click on the page and open the other popup (p2). In this case, two pop - up is open on top of the other which is a mess.

  So my question is: is there a way to prevent the user to click on the page, while a popup is open?

  Also, one of the popups (p1) launches a btf where very probably other popups will be open also (different from p2), so I would like to prevent the user from clicking anything on the page for the duration of the taskflow.

  Thank you!

  MB

  Hello

  1 - can you use a dialog inside your popup? In my view, using a dialog box, you disable the rest of the page.

  2 - you can create a link for each popup variable. The attribute, then disable/measure the other button based on this variable, then using events setPropertyListeners and popupClose to set true / false.

  Concerning

• How can I disable the alternative page layouts in the pages Panel?

  Hello

  For some reason any my pages Panel as divided into two columns, header V A4 and A4 V 2, I assume these are models replacing export HTML or something.

  How can I disable these options? I don't need this feature right now and I have pages in a single column that I need in the other. Don't seem to be able to find the commands to do this.

  Thank you

  Too bad! Beneath the dropdown page menu > view > horizontally, rather than by other layout.

• Disable the process Page

  I have an APEX 4.0.1 page that has a page process that sends an e-mail alert. Users want the alert. I need to disable this process from page but I want to keep the process in the application for documentation purposes and possibly allow if needs change. What good and setting must be set to disable the process from the page.

  Define the Condition of the process to '' never. ''

• disable the start page

  Hello

  In startup preferences, I put "show tabs from the previous session.
  Firefox at startup, it displays previous pinned tabs, but also a new tab (an asset) display of the google home page.
  It is possible to make firefox start shows only the pinned tabs, without a new tab on the home page?
  channel beta version - 20.0-
  Scenario: I have a script that opens multiple firefox profiles (e.g. 1 for mail, 1 for development, 1 for reading). each have their own tabs pinned. When starting each profile, all pinned tabs are loaded but the active tab is a new tab of the home page (or blank tab).

  There will always be at least a normal tab (non-epingle).

  This still occurs if you close he's another tab, then open a topic: tab empty and click a pinned before Firefox closed tab?

• How to disable the tabs page. Change the "browser.newtab.url" empty do not do.

  I don't want no legs. How can I disable them?

  Hello

  In Firefox 23, as part of an effort to simplify the Firefox options set and facilitate future improvements of Firefox, the option to hide the tab bar has been removed.

  Fortunately, this can easily be solved if you want the tabs to keep hidden. You can install "hide the tab with a tab bar", an extension hosted on the site of Mozilla Add - ons, which will restore the ability to hide the tab bar.

  Thank you and I hope this helps!

• HP Pavilion Notebook PC: disable the start page

  I would disable toally windows start page, I do not like, it is very disruptive, thank you very much for your help & time.

  Dolphin

  Please follow this tutorial:
  http://www.eightforums.com/tutorials/2894-log-user-account-automatically-Windows-8-startup.html

  Concerning

  Visruth

• VDP - can't even get to the config page

  We have deployed the OVA file and started the box. The boxes give an IP address and advise us to connect to: https://< IP address >: 8543/vdp-configure

  All we get is a display page:

  This web page is not available

  Go to the IP without the port on the screens at the end:

  Service unavailable!

  The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later.

  If you think that it is a server error, please contact the webmaster.

  Error 503

  172.16.32.227
  Thu Mar 19 13:16:06 2015
  Apache

  Have you tried to redeployment of the virtual machine to see if something happens and were also off our proxy settings.

  any ideas?

  After the first reboot, the device automatically runs a series of configuration scripts. No user intervention is required, but it takes time - as much as 30 minutes, or maybe even more according to the performance characteristics of your calculation and storage environments. I also saw a problem where Chrome does not display the user interface to configure POS. I had the best luck with Firefox.

• Need to disable the login page when you turn on the computer first

  I don't want the sign on the window to appear. I want to just bypass the sign in and auto and part of password go into Windows.

  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  How to automatically connect at startup in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• Disable the page of thumbnails

  I'm not a computer programmer who knows what a Boolean page is. I need an instruction step by step on how to disable the new page of thumbnails. I just want to do what he used to do when I opened a new page-go to my homepage. I'm on OSX 10.9.5

  Please take that I don't know anything what so ever and really break it down barney style.

  This morning I didn't know that this feature exists. I came home from work and POW there are all these similar decals for thumbnails of Safari which were very easy to turn off unlike those of Firefox.

  Type Subject: config in the address bar (address) and press the enter key to open the topic: config as you open a Web site by typing the URL in the address bar of the page.

  • If you see a warning message, so you can confirm that you want to access the comments: config page.
  • http://KB.mozillazine.org/about:config

  You can start typing browser.newtab.url in the search bar above to locate this preference.
  Open the context menu and select Edit and change the value to your preferred the new tab page.
  The default value is the topic: newtab page with nine tiles with thumbnails.
  If you want a blank page then that you assign to the pref Subject: vacuum

  See also this article on the page tab (topic: newtab):

  • https://support.Mozilla.org/KB/new-tab-page-show-hide-and-customize-top-sites

• How to disable the page for a value change event processing

  I am trying to find a solution to a requirement and is currently working on use cases using the HR schema.

  I have a text entry box in the page that accepts a new Department name.

  The value change listener method on it called a bean of support to verify the uniqueness of the name of the Department. (I'm an iteration through the lines of the Departments table to check if the value is unique)

  Now, I need to disable the page and display an hourglass, so what this control and display a message at the end of the treatment.

  I have this job except that I don't know how I can disable the entire page and see an hourglass.

  I have to use Javascript for this?

  Hello

  I've had this work now after the use of clientListener as below.

  Binding = "#{backingBeanScope.backingBean.IT1} '"

  ID = "it1.

  valueChangeListener = "#{backingBeanScope.backingBean.checkUnique} '"

  autoSubmit = 'true '.

  Validator = "#{backingBeanScope.backingBean.validateDeptName}" > "

  Type = "valueChange" / >

  Thanks for your help.

  References: http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf

• How can I disable the ability to pin tabs in FF13?

  I am looking for a way to disable the pinned tabs app - the ability to create and maintain those which already exist; preferably both. Is there a preference hidden (or normally disabled) in the config page which could be fixed? Destroy the existing profiles and repeating periodically are an option, but a distant second choice to stay with FF12.

  You can probably use the Menu Editor extension to remove the PIN as App tab in the context menu of the tab bar.

  • Menu editor: https://addons.mozilla.org/firefox/addon/menu-editor/

  You can also add code to the file userChrome.css below @namespace by default to hide items from the popup menu.

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #context_pinTab, #context_unpinTab { display:none!important; }