Issue of INS-35354 when installing Oracle RAC 12 on infrastructure Oracle Grid 12

Similar Questions

• Don't take any Message When installing Oracle 11 g 1 material with dbca on Solaris10

  Hi people Oracle,.
  
  Please can someone help me;
  
  When installing Oracle 11 GR 1 material with dbca on Solaris10 als I get to the last step with the creation of database after clicking on finish OK for HTLM model it takes too much time.
  And nothing out like the other error more than an hour. It's just waiting without installation procedure. Nothing
  I tried uninstall-install-uninstall-install but nothing. I google but nothing.
  Reason why I'm asking you please your advice, or a good link where to look.
  
  
  I thank in advance
  Sincerely
  Easyman

  It was just a workaround solution, since I plugged directly in the external display. Try this with X fonts.

• problems when installing ORACLE 10 g R2 RAC on RHEL 5.3

  I want to install oracle 10g R2 RAC on RHEL 5.3 in a test environment. My goal was to install using ASM.
  I went through ok prerequisites before starting the installation.
  Since RHEL 5.3 does not support raw devices, I used
  http://www.idevelopment.info/data/UNIX/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#configure%20iSCSI%20Initiator%20and%20New%20Volume
  
  udev to configure shared storage. my storage is on openfiler as an iSCSI target.
  
  fdisk-l on both nodes shows the shared disks.

  [root@node1 ~]# fdisk -l
  
  Disk /dev/sda: 21.4 GB, 21474836480 bytes
  255 heads, 63 sectors/track, 2610 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sda1   *           1          13      104391   83  Linux
  /dev/sda2              14        2053    16386300   8e  Linux LVM
  /dev/sda3            2054        2372     2562367+  82  Linux swap / Solaris
  
  Disk /dev/sdd: 10.5 GB, 10502537216 bytes
  64 heads, 32 sectors/track, 10016 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdd1               1       10016    10256368   83  Linux
  
  Disk /dev/sdb: 10.5 GB, 10536091648 bytes
  64 heads, 32 sectors/track, 10048 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdb1               1       10048    10289136   83  Linux
  
  Disk /dev/sdc: 10.5 GB, 10536091648 bytes
  64 heads, 32 sectors/track, 10048 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdc1               1       10048    10289136   83  Linux
  
  Disk /dev/sdf: 10.5 GB, 10569646080 bytes
  64 heads, 32 sectors/track, 10080 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdf1               1       10080    10321904   83  Linux
  
  Disk /dev/sde: 10.5 GB, 10502537216 bytes
  64 heads, 32 sectors/track, 10016 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sde1               1       10016    10256368   83  Linux

  [root@node1 ~]# ls -l /dev/iscsi/arpl*
  /dev/iscsi/arpl1:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sde
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
  
  /dev/iscsi/arpl2:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdd
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
  
  /dev/iscsi/arpl3:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdb
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
  
  /dev/iscsi/arpl4:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdc
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
  
  /dev/iscsi/arpl5:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdf
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
  [root@node1 ~]# 

  Configure the results of udev in the drives mapped to the names of persistent drive for example. / dev/iSCSI/arpl1/part1
  always when I enter the name of the raw device that I created I get the following error. Help, please
  
  Image:! http://img91.imageshack.us/img91/7448/Oracle.PNG!

  did you check that
  http://download-West.Oracle.com/docs/CD/B19306_01/install.102/B14203/storage.htm#BABBHECD
  http://download.Oracle.com/docs/CD/B28359_01/install.111/b28263/storage.htm#CDEBFDEH

  also before making what is proposed on the url posted by Mufalani.
  It seems that you should do the following:

  Verify the existence of udev mapping rule file /etc/udev/rules.d/60-raw.rules brute
  On HR/EL5, gross udev mapping rule file /etc/udev/rules.d/60-raw.rules must exist by default as part of the util-linux package, for example:

  # ls /etc/udev/rules.d/60-raw.rules
  /etc/udev/rules.d/60-raw.rules
  

  Create a custom gross udev mapping rules file, /etc/udev/rules.d/61-oracleraw.rules say, for example:

  # touch /etc/udev/rules.d/61-oracleraw.rules
  

  3B. Add raw udev binding rules to the /etc/udev/rules.d/61-oracleraw.rules file
  Add the binding rules gross udev in the etc/udev/rules.d/61-oracleraw.rules file, for example:

  # cat /etc/udev/rules.d/61-oracleraw.rules
  # Raw bind to Oracle Clusterware devices
  ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
  ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"
  

  If switch to RHEL5/OEL5 since an earlier version of Linux that has pressed persistent raw device bindings in the/etc/sysconfig/rawdevices file, the following script can serve as a basis to generate your RHEL5/OEL5 of the udev rules. Note that the script does not factor device name persistence.

  #!/bin/bash
  grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
  if [ -z "$minor" ]; then
  echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
  else
  echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
  fi
  done
  

• When installing Oracle BI 12 c on AIX is xmalloc of error: could not allocate 2112164888 bytes (0 bytes allocated)

  Dear all

  I was asked to install Oracle BI server on an AIX 6.1 Server 12 c old we have.

  I have JAVA SDK 7 which is supposed to be certified with both weblogic and BI 12 c

  I have installed weblogic with no problems, but when you call BI installation I get this error

  xmalloc: could not allocate 2112164888 bytes (0 bytes allocated)

  I tried to adjust/etc/security/limits

  $ ulimit - a

  Time (seconds) unlimited

  leader (Blocks) unlimited

  Data (KBytes) unlimited

  Stack (KBytes) 196608

  Memory (KBytes) unlimited

  coredump (Blocks) unlimited

  nofiles (descriptors) 65536

  threads (per process) unlimited

  process (per user) unlimited

  I don't know if this is related but I thought that it might help, but it didn't

  I have enough memory on the server, so what else could be wrong?

  Thank you all

  He is certified according to

  http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1212certmatrix-1970069.xls

  in any case, I found the solution, I don't even believe that such a thing has stopped me for a long time

  I only had to run the command from the same directory where the bin file!
  I used to run it like this

  . // bi_platform - 12.2.1.0.0_aix_ppc64.bin

  I should go the location first, then executez./bi_platform-12.2.1.0.0_aix_ppc64.bin

  Thanks to you all

• Problems when installing Oracle XE 11 g x 64

  Everything in the re - install Oracle XE, I see all of the files under the directory

  C:\oraclexe\app\oracle\oradata\XE

  It seems that no schema is created, including when coz I am trying to connect, I get the error below. Can someone guide me?

  

  The problem is resolved. I deleted some of the entries localhost in the host file and then tried to install the same. It worked.

• Forgotten original password when installing Oracle 10 g XE. What can I do?

  Hi, I have installed Oracle 10 g XE and my labtop two years ago, but I never really used it until now that I need to. The problem is that when I try to open a session asks me the password I originally took in the initial installation of the software, which I do not remember anyway. I was wondering if anyone could advice me in what should I do to begin to use the database? Thank you very much. Any help will be greatly appreciated.

  Hello

  From the Service Panel, you can start the OracleServiceXE service to start the database.

  Then, from a DOS window (connected with the OS user with which that oracle was installed), try this:

  set ORACLE_SID=XE
  sqlplus /nolog
  connect / as sysdba
  alter user sys identified by ;
  

  This way, you will have the new password for SYS.

  You will have more details on the following link:

  http://download.Oracle.com/docs/CD/B25329_01/doc/admin.102/b25107/users_secure.htm#sthref290

  Beware, if you change passwords from APEX, you will need to do some operations on the demand side too.

  Hope this helps.
  Best regards
  Jean Valentine

  Published by: Lubiez John Valentine on February 12, 2011 22:20

• Install Oracle Grid

  Installing the Oracle grid (11 g R2) on SUSE Linux 11. When the installation program has reached the required configuration step check, it displays an error:
  
  The following packages are missing:
  
  libstdc ++ 43 - 4.3.3_20081022
  libstdc ++ 43-32-bit - 4.3.3_20081022
  libstdc ++ 43-devel-32-bit - 4.3.3_20081022
  libgcc43 - 4.3.3_20081022
  
  Where can I get them?

  Hello

  What version of Oracle im trying to install? 11.2.0.1?

  Try with 11.2.0.3 (download full installer to MOS).

  Since you have a more recent libstdc ++ I guess that you can safely ignore this error and proceed with the installation.
  If you can not go forward, try to call the installer with - ignoreSysPreReqs

  I would not replace libstdc with an older version.

  Concerning
  Sebastian

• Issue when installing Oracle WebCenter Portal JSK 11.1.1.8.0

  Hello!

  I have an error at step 10 of the 22. Can anyone help?

  Fri Aug 1 07:14:03 EDT 2014: BEGIN STEP 10 of 22: creation of WLS and domain servers. Estimated time is 1 minute. Please wait..

  CLASSPATH=/u01/app/oracle/product/webcenter/fmw/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/oracle/product/webcenter/fmw/jdk1.6.0_29/lib/tools.jar:/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/server/lib/weblogic.jar:/u01/app/oracle/product/webcenter/fmw/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/server/lib/webservices.jar:/u01/app/oracle/product/webcenter/fmw/modules/org.apache.ant_1.7.1/ lib/ant-all.jar:/u01/app/oracle/product/webcenter/fmw/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/u01/app/oracle/product/webcenter/fmw/oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/lib/adfscripting.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/lib/mdswlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/auditwlst.jar:/u01/app/oracle/product/webcenter/fmw/ oracle_common/common/wlst/resources/igfwlsthelp.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/jps-wlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/jps-wls-trustprovider.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/jrf-wlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/oamap_help.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/ossoiap_help.jar:/ u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/ossoiap.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/sslconfigwlst.jar:/u01/app/oracle/product/webcenter/fmw/oracle_common/common/wlst/resources/wsm-wlst.jar:/u01/app/oracle/product/webcenter/fmw/utils/config/10.3/config-launch.jar::/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/common/derby/lib/derbynet.jar:/u01/app/oracle/product/webcenter/fmw/wlserver_10.3/common/derby/ lib/derbyclient.jar:/U01/app/Oracle/product/WebCenter/FMW/wlserver_10.3/common/Derby/lib/derbytools.jar:

  WebLogic Scripting Tool (WLST) initializing...

  Welcome to WebLogic Server Administration scripts Shell

  Help() type help on the available commands

  Creation of domain to/u01/app/oracle/product/webcenter/domains/webcenter using the /u01/app/oracle/product/webcenter/fmw/wlserver_10.3/common/templates/domains/wls.jar model

  Error: failed to set(). Do dumpStack() for more details.

  Problem call WLST - Traceback (innermost last):

  File "/ tmp/webcenter/jsk_unzipped/linux64/create_wc_ucm_ibr.py", line 37, in?

  File "/ tmp/WLSTOfflineIni1560864277384758095.py", line 99, to createDomain

  at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)

  at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)

  at com.oracle.cie.domain.script.jython.WLScriptContext.set(WLScriptContext.java:1304)

  at com.oracle.cie.domain.script.jython.WLScriptContext.createDomain(WLScriptContext.java:502)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: java.lang.reflect.InvocationTargetException

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/bin/startManagedWebLogic.sh: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/bin/stopManagedWebLogic.sh: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/bin/stopWebLogic.sh: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/sysman/state/targets.xml: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/init-info/tokenValue.properties: no such file or directory

  SED: can't read /u01/app/oracle/product/webcenter/domains/webcenter/init-info/startscript.xml: no such file or directory

  Fri Aug 1 07:14:31 EDT 2014: UNSUCCESSFUL STEP 10 of 22: creation of WLS and domain servers

  Admin password must contain at least one number

• Getting error when installing Oracle 11 G in 64 bit OS Win8

  Hi all

  I get error (INS-13001 environment does not meet the minimum requirements) after I started to install the Oracle 11 G database in 64-bit Windows 8.

  A pop up appears with above message and buttons, Yes and no. Can I continue even if the message above?

  Please let me know whether or not Oracle 11 G supports Windows 8 OS. ?

  also let me know, if any other alternative way to continue with 11G under OS Win8

  Thank you for your response to this

  Oracle 11g is not certified for windows 8.

  You can also check in the document of pre-Caribbean down the link

  http://docs.Oracle.com/CD/E11882_01/install.112/e24186/reqs.htm#CHDGJEJE

• get no argument error when installing Oracle 11 g on linux 6

  As I completed all pre-installation task, but after creating the oracle a/c and install the oracle database
  get the error no argument found
  and also I am not able to get the coorrect of java on linux version 6
  Please help me for this

  PL identify exactly which version of the Oracle database you install Linux 6.x - currently only 11.2.0.3 is certified on Linux 6.x - http://docs.oracle.com/cd/E11882_01/relnotes.112/e23558/toc.htm#CHDFHIEA

  If you install 11.2.0.1 or 11.2.0.2, then you need to use Linux 5.7 or 5.8 - pl follow the instructions in the Installation Guide - http://docs.oracle.com/cd/E11882_01/install.112/e24321/toc.htm

  HTH
  Srini

• Installing Oracle 11 g 2 on windows 8

  When installing Oracle 11 g 2 on Windows 8 company I get the following error:
  I can install and do not take into account this error safely.

  INS-13001: environment does not meet the minimum requirements.
  Question: Minimum requirements were not met for this environment
  Action: Check the logs for more information or check taken configurations supported for this product.

  Hi Cory,.

  The question you have posted is related to Windows 8 Enterprise Edition and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/category/w8itpro

  I hope this helps.

• Impossible to install Oracle JDeveloper on Windows 7, 'Property not found in autorun.inf CMD'

  I try to install Oracle JDeveloper 12 c on Windows 7, but I get the error 'Property CMD' not found in autorun.inf, when I run the file directly.

  

  If I run Oracle installer (as an administrator), I get the file "corrupted", but I think it is misleading.

  

  Google search, this seems to always point to that here where it says

  

  Previously, I had a compatibility issue when installing Oracle Developer (forms, Designer, reports and JDeveloper10g), I corrected as saying that must be run on Windows XP SP2, and that did the trick. But I don't see anything about compatibility via the google search for this problem.

  When the exe file is run some tests pre - req gets run as 64-bit JVM and Swap space. The other machine may not have the pre - req.

  

• Installing Oracle 11g on Oracle Linux 5.10

  Hi all

  When installing Oracle 11 g R2 in Oracle Linux 5.10 I get the error message: no such file or directory

  
  

  ---------------------------------------------------------------------------------

  [data info@localhost] $ ls

  doc installation RPM runInstaller stage www sshsetup response

  [data info@localhost] $./runinstaller.sh

  bash:. / runinstaller.sh: no such file or directory

  [data info@localhost] $

  -----------------------------------------------------------------------------

  Please suggest.

  What is the path of your runInstaller.sh? This path contains spaces? If so, to remove these spaces, and then try again.

  Also have you created (an oracle oracle owner) of the user? You must install with this user...

• Benefits & different about the user to install Oracle ASM.

  As an Oracle document.
  They suggested the user to install Oracle Grid Infrastructure with ASM disk.
  Please suggest me any advantage & different each user.
  as oper, asmdba, asmoper, asmadmin
  
  Thank you.
  Jossza
  
  Published by: user13049841 on March 17, 2011 22:03

  Hi Jossza;

  As an Oracle document.
  They suggested the user to install Oracle Grid Infrastructure with ASM disk.
  Please suggest me any advantage & different each user.
  as oper, asmdba, asmoper, asmadmin

  As you mention oracle suggests using different user for grid, asm, etc. Thatsgood path if you have only 1 db. But for me its coz not usable, I have to manage more than 300 db if it is difficult to give the user DIF. for each facility, it makes my job more complex. I hope I can show you my index

  Respect of
  HELIOS

• COMMAND NOT FOUND - ORACLE GRID

  Hi all

  While typing in the mentioned order, I received the command not found below. I wonder what could be the reason. I installed ORACLE GRID on my test server. Also, feel free to check the output of bash_profile for grid below: -.

  [grid@storage Desktop] $ sqlplus / as sysdba

  bash: sqlplus: command not found

  asmca $ [grid@storage Desktop]

  bash: asmca: command not found

  [grid@storage Desktop] $ lsnrctl status

  bash: lsnrctl: command not found

  [grid@storage Desktop] $

  [grid@storage Desktop] $ vi ~/.bash_profile

  # .bash_profile

  # Get the aliases and functions

  If [~/.bashrc - f]; then

  . ~/.bashrc

  FI

  # Specific programs startup and user environment

  $PATH = path: $HOME/bin

  export PATH

  ORACLE_SID = + ASM; export ORACLE_SID

  JAVA_HOME = / usr/local/java. Export JAVA_HOME

  ORACLE_BASE = / u01/app/grid; export ORACLE_BASE

  ORACLE_HOME=/U01/app/11.2.0/grid; Export ORACLE_HOME

  ORACLE_TERM = xterm; export ORACLE_TERM

  NLS_DATE_FORMAT = 'HH24:MI:SS OF MON-DD-YYYY "; Export NLS_DATE_FORMAT

  TNS_ADMIN = $ORACLE_HOME/network/admin; Export TNS_ADMIN

  ORA_NLS11 = $ORACLE_HOME/nls/data; export ORA_NLS11

  Path=.:${JAVA_HOME}/bin:${path}:$Home/bin:$ORACLE_HOME/bin

  PATH = ${PATH}: / usr/bin: / bin: / usr/bin / X 11: / usr/local/bin

  PATH = ${PATH}: / u01/app/common/oracle/bin

  export PATH

  LD_LIBRARY_PATH = $ORACLE_HOME/lib

  LD_LIBRARY_PATH = ${LD_LIBRARY_PATH}: $ORACLE_HOME/oracm/lib

  LD_LIBRARY_PATH = ${LD_LIBRARY_PATH}: / lib: / usr/lib: / usr/local/lib

  export LD_LIBRARY_PATH

  CLASSPATH = $ORACLE_HOME/JRE

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/jlib

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/rdbms/jlib

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/network/jlib

  Export CLASSPATH

  THREADS_FLAG = native; export THREADS_FLAG

  Export = TEMP/tmp

  export TMPDIR = / tmp

  umask 022

  You should also check the USER ORACLE .bash_profile OUTPUT as well. The following is an OUTPUT

  [oracle@storage ~] $ vi ~/.bash_profile

  # .bash_profile

  # Get the aliases and functions

  If [~/.bashrc - f]; then

  . ~/.bashrc

  FI

  # Specific programs startup and user environment

  $PATH = path: $HOME/bin

  export PATH

  ORACLE_SID = orcl; export ORACLE_SID

  ORACLE_UNQNAME = orcl; export ORACLE_UNQNAME

  JAVA_HOME = / usr/local/java. Export JAVA_HOME

  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE

  ORACLE_HOME=$ORACLE_BASE/product/11.2.0/Db_1; Export ORACLE_HOME

  ORACLE_TERM = xterm; export ORACLE_TERM

  NLS_DATE_FORMAT = 'HH24:MI:SS OF MON-DD-YYYY "; Export NLS_DATE_FORMAT

  TNS_ADMIN = $ORACLE_HOME/network/admin; Export TNS_ADMIN

  ORA_NLS11 = $ORACLE_HOME/nls/data; export ORA_NLS11

  Path=.:${JAVA_HOME}/bin:${path}:$Home/bin:$ORACLE_HOME/bin

  PATH = ${PATH}: / usr/bin: / bin: / usr/bin / X 11: / usr/local/bin

  PATH = ${PATH}: / u01/app/common/oracle/bin

  export PATH

  LD_LIBRARY_PATH = $ORACLE_HOME/lib

  LD_LIBRARY_PATH = ${LD_LIBRARY_PATH}: $ORACLE_HOME/oracm/lib

  LD_LIBRARY_PATH = ${LD_LIBRARY_PATH}: / lib: / usr/lib: / usr/local/lib

  export LD_LIBRARY_PATH

  CLASSPATH = $ORACLE_HOME/JRE

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/jlib

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/rdbms/jlib

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/network/jlib

  Export CLASSPATH

  THREADS_FLAG = native; export THREADS_FLAG

  Export = TEMP/tmp

  export TMPDIR = / tmp

  umask 022

  PROBLEM has BEEN SOLVED NOW by tuning in ORACLE ENTERPRISE LINUX 6.5 (making the new facility). I want to especially thank you Aman.... for his great support and advice. Also be sure to check the blog that I have prepared during installation.

  Blog URL: Setup Guide of grid complete Oracle 11 g on Oracle Enterprise Linux 6.5

  In order to perform the complete Oracle with the Installation of the grid. Follow the mentioned below of the measures accordingly.

  1 install Oracle Enterprise Linux 6.5 (if you have already installed OS then follow step 2)

  2 oracle 11 g with Installation of the rack on Oracle Enterprise Linux 6.5 (part of the Configuration)

  3 prepare the disk to ASM DISK using ASMLib
  4. infrastructure installation oracle Grid (DATA of GROUP of DISKS ASM creation)

  5. using creation of GROUP of DISKS ASM FRA ASMCA (ASM Configuration Wizard)

  6. Install ORACLE DATABASE SOFTWARE only

  7. Configure the LISTENER

  8. create the DATABASE

  9 Start ENTERPRISE MANAGER CONTROL