Similar Questions

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• WRT54G can not reset or see the config page.

  Hello. I have a wrt54g that I have configured previously, including wep and mac filtering.

  I have access to the internet.

  Today I noticed that I can't access router config (checked 192.168.1.1 is worn by ipconfig/all).  I tried to connect both wifi and ethernet with disabled wifi.  Under firefox and IE tells me the config page could not load, server not (or order) answer.

  No password or logon screen fails just load the page.

  I tried to reset the router by unplugging the router and all the cables of e'net. I pressed the button of reset for 60 seconds.  When I reconnected it it has rebooted without any reset... he had the same SSID and WEP key. ?????

  At first I thought it was a problem of W7, because I just upgraded, but I can't reset or access to the page of Firefox, chrome or my iphone. Maybe the router is bricked as config is concerned.   ?

  Any suggestions?

  What you have said above, you pressed the reset button with the unplugged router.  That will do nothing.  Plug in the router and wait 60 seconds.  With the power on, press and hold the button of reset for 30 seconds and then release.  Wait 30 seconds and now the router power cycle.  Connect with your wired computer to 192.168.1.1 empty user name, admin password and reconfigure.

• Windows 8 Setup(on USB Drive, but I didn't actually install it just tested out to check if valid) causing constant reboot can't even get to the start screen where I have connection on my Chromebook (AcerC720)

  Also if you're wondering why I'm posting on this forum about microsoft, it's because you guys would probably well informed of the problem.

  You can start by unplugging all non-essential devices you may have connected to the computer.

  If the problem persists.

  Start the computer before Windows starts to load, press F8 repeatedly until the recovery environment is responsible.

  Click on repair computer

  This will load the advanced Recovery Options

  Click on solve problems

  Click on startup repair

  Follow the instructions on the screen.

  See if it solves the problem.

• I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I can't get a secure boot or anything. are there secret shortcut keys or anything like that? !! ??

  Dear klh76

  You need a USB FLASH DRIVE, you can transfer the files from the Recovery Console Windows Vista from any other pc or laptop running Windows Vista, go to the backup and restore on the other computer and click on create a drive recovery system on the file menu. Once done, insert the usb key into the laptop, you want to fix, start by using selected peripheral USB device as MBR, follow these steps on screen, you can repair a corrupt Windows Vista it or restore to a previous restore point.

• Install Windows 8 - I get where the downloads page. When I click on 'Open' nothing happens. Tried searching the records hidden - nothing!

  I currently have installed Windows7 x 64.  I had previously and unsuccessfully tried to install Windoes8 preview. Now, I try to install the full Windows 8.  I went to the Microsoft site, clicked on the download Pro now [$39.95].  He appears in the downloads, but when I click on 'Open' nothing happens.  I looked into the hidden folders and it does not appear anywhere.  Great mystery!  Where can it be?  Can something be blocking the opening?  Is there another way I can check if it is even downloaded to the PC?     Thank you.
  PS - what I get from the download page is the Upgrade Assistant that is what does not open on the PC.
  Update - has managed to enter the program when I clicked on the Start button and then clicked on "Download Windows".  I ended up finding a message that the download was unsuccessful due to an unspecified error.  Just a matter worse.  Some little problem with my system?

  Try to rename or delete the Web installation folder and try again.

  C:\Users\\AppData\Local\Microsoft\Web install

  Please let us know if you are able to continue after trying the above

• When I go on a website, I get a menu of the site (list on the left side of the page) rather than the homepage itself. Use internet explorer, I get to the home page. Why not on Firefox? It just started happening recently

  I updated firefox a few weeks ago, but the update never caused this problem.
  I installed a program to help the computer run more efficiently, called "Fix - it Essentials" and who can have caused the problem, although it didn't for the first two weeks that I used it.

  So I can't always get to the homepage of many Web sites and navigate as I want.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • http://KB.mozillazine.org/Websites_look_wrong
  • http://KB.mozillazine.org/Website_colors_are_wrong

• Access Point WRT1900AC & Firmware version: 1.1.10.167514, it cannot be accessed the config page.

  Hello!

  I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
  Firmware version: 1.1.10.167514
  Release date: June 30, 2015

  My WRT1900AC is configured as a wireless gateway.

  https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286

  Also, I have disabled firewall and uPnP.
  A tutorial here:

  http://www.Linksys.com/us/support-article?articleNum=140371

  Everything works except that without access to the router config page.

  The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP

  (after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.

  Yesterday, I spoke with live chat. I received recommendations:
  "Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the

  WRT1900AC will be his disabled DHCP. »

  I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
  Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of

  fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
  Otherwise everything works well and stably.

  inspire wrote:

  Hi chadster766!

  Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
  If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)

  IP address of the router (LAN):

  Connectivity-online-online details router LAN => Edit

  * If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2

  Bridge mode:
  Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode

• Can I provide feedback on the help pages?

  Adobe Creative Cloud product help

  Altogether. We always encourage your comments. You can add your comments to the help pages that are available on the Adobe Web site. Or you can also discuss your reactions to the Adobe Community Help forum.

• where can I I get - find the 'old' hearts game - not the hearts of internet

  I only have hearts to the internet, but want just hearts.  where can I find/get it.

  Hi WarmOne,
   
  By default, Windows XP includes games FreeCell, hearts, Minesweeper, Pinball, Solitaire and Spider Solitaire.
   
  It would be possible that this game could be unchecked in 'Add/Remove Windows components.
   
  See the link below for more information check box to activate the game.
   
  How do I add or remove games in Windows XP

• Windows 7 screensaver not working do not, can not even get a glimpse of their

  Hello

  I'm having a similar problem as others who have posted in this screen savers do not work o my machine (Win 7 Ultimate 32 bit), I can't even preview any screen saver. I ran some of the suggestions in other posts without result. I have a combination keyboard and microsoft wireless mouse (mouse is a 5000 wireless and the keyboard is also the version 5000).

  I read in a post that there is a filter download that can help with this problem, I downloaded the file but don't remember considering all the instructions about what to do next. It is not an exe file just .cat, .inf, sys and a dll.

  I'm suppoosed to put in the folder of mouse/keyboard in my programs?

  Thank you

  Tom

  Tom,

  Try the following:
  Several registry settings must be modified to correct this problem. To change the registry settings, follow these steps.

  1.	Open Notepad.
  2.	Copy and paste the text in Notepad, keeping all empty lines, including a final blank line: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Desktop] "ScreenSaverIsSecure" = '0 '. "ScreenSaveTimeOut" = "600". "ScreenSaveActive" = "1". [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Control Panel\Desktop] "ScreenSaveActive" = DWORD: 00000001 "SCRNSAVE. EXE "= -. [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\LocalUser\Software\Policies\Microsoft\Windows\Control Panel\Desktop] "ScreenSaveActive" = "1". [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer] "NoSaveSettings" = DWORD: 00000000 [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\LocalUser\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer] "NoSaveSettings" = DWORD: 00000000 [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\LocalUser\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer] "* del. NoSaveSettings "= -.
  3.	Save the file as a .reg on your desktop file. For example, save the file as screen-saver - fix.reg.
  4.	Double-click the file name to run it.

  NOTE: change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Let us know if that helps with your question.

  Marilyn

• Cascading E3850 disables the config. page?

  So I was pretty excited when I had just purchased a new Linksys AC2400 WIRELESS router because it would be a huge upgrade for me from the router D - Link DIR-615 cheap I had before. But now, because of what I consider a problem very serious design with the router, I am about to return and to ensure that his replacement doesn't have the same problem.

  The problem is only on the difference in the use of Basic for the router, where there isn't that one router in your home and all your home devices are connected and the router is connected directly to the internet, I need this new router linksys with router-bridge cascading my ISP in my basement and it is impossible to do without the Web page of the router configuration (as well as some features of "premium" of the router) becomes unavailiable after setting up the network. This means that whenever I want to change a setting on the router, I have to restore the router to factory settings and restore the previous settings before I can make the change. This implies two reboots and a lot of hassle for something that should be achievable within a webpage of simple configuration at any time.

  Let me explain how this happens. When you connect two routers and you want to have the same network on both routers, you must connect the LAN to LAN routers and disable the DHCP server on one of them. If I keep the DHCP server on the Linksys, I don't know why, gateway / router my ISP ceases to provide internet. Even if I change the LAN IP of the gateway to be within the range of the Linksys allocation DHCP IP range, all computers that never connect to the network get their DNS address automatically (it is empty). I was able to disable the DHCP and still no internet on bridge / router my previous ISP, so I don't think that disabling DHCP of the gateway must disable its internet (but for some reason, this is the case with the new access provider). So the only availiable is to disable DHCP on the Linksys router. While all cameras, wired or wireless, can connect to the internet perfectly in this configuration, by design (http://www.linksys.com/ca/support-article?articleNum=132275, search for "you will not be able to access the web-based configuration page" inside the page) This disables the page of the Linksys router but also some of the functionality of outlets like printer sharing (I have not tested other features can disappear as well).

  While I don't dare argue that 'premium' functionality should always be available with the off DHCP protocol (although I strongly suspect that it should be possible to keep it available) of the fact that the configuration page disappears is a huge problem. This is because I know that as time passes I will need to change the settings here and there on the router such as port forwarding and storage sharing functions of the router.

  And even if I didn't change the settings frequently, it of not fair for me to have (relatively) paid a lot of money for the router and must accept having to reset the router to factory settings everytime I want to change a setting.

  I don't know why Linksys took the design decision to intentionally disable configuration page when the DHCP server on the router is turned off. The cheap D-Link router has managed to keep its configuration page to the top after I disabled the DHCP.

  So I say Linksys, please remove this unnecessary limitations (disabling the page config. when the service DHCP disabled and if possible also remove the deactivation of value-added functions (printer/storage, sharing, etc.) when the DHCP service is disabled). You will not be able to correct them before my product back from the ends of the window, but if solve you this problem, I will look into your routers the next time I have to buy a new.

  Hello.

  I solved the problem, fortunately. What is happening is that the linksys IP was on a different subnet that the ISP router assigned to the local network. Router of the ISP gave the address of 192.168.0.X subnet LAN but the Linksys is the 192.168.1.X subnet so anything on the network can access it. By changing the IP Address of the linksys to something in the 192.168.0.X subnet router I can access its configuration page now and all the features of "premium" of the router as the printer / hard drive/media sharing now work!

  I had to do a lot of testing with my older router and ISP router to discover the problem. It was later that I learned the technical explanation of what was going on after looking upward.

  What is the Linksys support page at http://www.linksys.com/ca/support-article?articleNum=132275 trying to say by saying "NOTE: when cascading of routers by using this method, you will not be able to access the configuration page of the secondary router web-based since it will have the same IP range as the main router.'? '" I do not know. But the page of the "secondary" router web-based configuration is still available after the waterfall it.

  I have to clarify that the steps that I had to do to solve my problem wasn't in the Linksys guide linked above. The guide will make anyone trying to cascade on the routers default IPs are on different subnets (eg. Linksys 192.168.1.1 with Cisco 192.168.0. 1) have the same problem I did. The guide mentions changing the fourth byte of the "secondary" router IP (eg. the '1' in the 192.168.0. 1) so that they are different to the 'main' and 'secondary' routers, but it says nothing about the second router (eg. 192.168.0 in 192.168.0.1) IP subnet which must be the local network of the "main/primary" router subnet

  Long story short, the official guide for Linksys I linked somewhere above does not cover a particular case when certain brands/models of router combinations are used and will not work in these cases. The guide should be updated so that the subnet of the IP address of the router being cascade is the same as that of the main router's LAN.

  So, I'm sorry Linksys to say something that was wrong on your products. Your routers do not hell their configuration Web page when their DHCP is disabled or when mount you them cascading, but the guide to http://www.linksys.com/ca/support-article?articleNum=132275 does not correctly handle routers whose default subnets are different.

• TB refuses my password - pswd is good because I can access e-mail on the web page of Yahoo from Verizon

  I use Yahoo from Verizon. Everything has worked when suddenly Thunderbird does not accept my password to give me the following error message: "sending the password failed. "Mail server incoming.yahoo.verizon.net replied: (#AUTH012) Incorrect username or password".

  However, the password is good because I can log on and get my email from the web page of Yahoo from Verizon.

  The problem is solved. Verizon-Yahoo never was informed to change the user ID in the settings of my account xxxxxx in [email protected], that is, simply add the @verizon.net to your user name on the server settings page.

• Start Mozilla Firefox changed yesterday my page. It is heavy. How to get back the start page I had before?

  The new start page fills the entire screen. It is the slider against the top margin to reveal the bar showing the tabs and the 'X' to close in the HR area. Inside, the start page covers the box 'Start' and the information on the bottom row. Now, I can't click on bookmarks - I have to click on the logo, then use the side bar to access the bookmarks. I also lost the ability to switch between the net and the document I'm trying.
  This new configuration may be suitable for some people, but the previous one was simpler and better for me. How can I get it back and prevent the update again for this version of Firefox?

  Hello, sounds like you have accidentally activated in mode full screen - please press F11 to leave again.

• How can I gid rid of the welcome page in Firefox and go directly to my home page?

  When I bring my Firefox browser, the first page is a big orange homepage. How can I get rid of this?

  Please read the article How to set the home page to set a home page and Firefox to go to the home page when it opens.