CAT Alert count displays continuously after considering

Similar Questions

• keyboard randomly stops working and continues after reloading safari. Running El captain

  wireless keyboard randomly stops working and continues after reloading safari. Captain El running. He did once, using Word as well. On the occasion when his order in safari it works in Word and then stops again.  Y at - it a cache keyboard or something that needs resetting? Any help would be welcome.

  If your USB keyboard or wireless does not work

  Keyboard does not work

  Keyboard/mouse - troubleshooting wireless

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• The event viewer displays continuously errors with ID 7000 and 7009

  I use Acronis Disk Monitor, which shows the disk health 82% due to a bad block on disk. Observer events poster continually errors on ID 7000 and 7009, but I can't find a solution to these errors or what they mean exactly.

  11/14/2010 08:31 am, Catkin333 wrote:

  I use Acronis Disk Monitor, which shows 82% because of the bad health disk
  block on the disk. Event Viewer displays continuously errors on ID 7000 and
  7009, but I can't find a solution to these errors or that they
  mean exactly.

  If Acronis reports bad blocks on the disk, then you should replace the disk as soon as possible.  Blocks of bad sectors/bad is not repairable, and once they begin to appear that they tend to behave like a snowball rolling downhill, you will get several of them with increasing speed.  You may lose your data if you keep using this drive.

  Regarding the events 7009 & 7000, you will need to copy & paste the events here for give us to you more information.  Double-click on the event to see its properties, and then click the icon of the Clipboard (which looks like 2 pages of paper) to copy the event, you can then paste it in your next post.  These Service Controller errors may be caused by a multitude of different things.

  John

• Installed Vista pack 1 as prompted. Tour is continuing after 10 hours. Monitor says no entries, and falls asleep.

  original title: installed Vista pack 1 as prompted.  Tour is continuing after 10 hours.  Monitor says no entries, and falls asleep.  What should I do?

  My desktop computer has said that there was a problem with the window.  He said that Vista pack 1 expired July 12.  I installed it when prompted by August 6.  He began to run at 18:30 and HP Tower ran all night with a blue and orange light flashing.  The monitor was gone to sleep.  When I turned on the screen this morning, he said that he had no entry and time to sleep.  What should I do next?    I just got internet on 28 June, so don't know what that what is happening.  I get updates automatically.  Why it that not update.  I use another computer to communicate with you because I don't know what to do next.

  Spent by the factory with the OS. After 18 + OVERLAYS on my XP Pro PC I've exchanged on this VISTA Premium 32 bit and after 15 + OVERLAYS on this one, IT WORKS finally.

  This experience as Kosh Vorlon said above RESTORATION anyway possible and go directly to Microsoft for Service Pack so I found this to be the best source

  It's the 32-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  This is the 64-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=21299

  Now it's been GETTING all THE UPDATES... I found that the PC knows what to do with them, and without any help from us that it just boot process follow all prompts.

  When it's done GET SERVICE PACK 2, SP2 from Microsoft

  It's the 32-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  It is for the 64-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  and it goes the same for this time to GET all UPDATES.

  And a my Service Packs note came in the updates of Windows. As well as all updates from the update updates. HP updates are usually for the hardware and drivers.

  Good luck

  RickS

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• Dialog.Alert () cannot display in implements method

  class DialogCommandHandler extends CommandHandler
  {
      public void execute(ReadOnlyCommandMetadata metadata, Object context)
      {
          if (context.equals(contextSearch)) {
              Dialog.alert("Coming soon!");
          }
      }
  }
  

  Hi, everyone, I found this problem while I'm my debugger application, execution implements net.rim.device.api.command.CommandHandler.execute, in that implements Dialog.alert () cannot display my warning, I've tried with/without synchronized invokeAndWait() and invokeLater() (Application.getEventLock ()) {}, each of them did not work properly, is there a solution for this problem, or is it a question? Thank you! ~

  Can you describe what is happening?  There is an exception thrown?  Or the treatment stops right?

  In this case, I think the correct 'packaging' for this, is an invokeLater.  I think that the other options will cause a blockage.  So, your code will be something like:

  If (context.equals (contextSearch)) {}

  UiApplication.getUiApplication.invokeLater (new Runnable() {}

  public void run() {}

  Dialog.Alert ("Coming soon!");

  }

  });
  }

• Tandberg 6000 MXP restarts continuously after 1 minute

  Hi all

  I have a Tandberg 6000 MXP. Recently, it restarts continuously after only 1 minute. Anyone facing this problem?

  Please help me.

  Thank you.

  I had something similar happen to me with an EX60. It turns out that there was a problem in the registration information sip with the same information for indoor and outdoor record. Wiped factory reset the problem then reconfigure

  Sent by Cisco Support technique iPad App

• I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  How can I fix it? Nothing in help or on the Site.

  Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

  That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

• How to count the continuous dates in oracle 11g

  Hello
  
  I need to count the continuous more than 9 days between given dates below is my example
  
  Are my data like this
  MAY 1, 2013
  MAY 2, 2013
  MAY 3, 2013
  MAY 4, 2013
  MAY 5, 2013
  6 MAY 2013
  MAY 7, 2013
  MAY 8, 2013
  MAY 9, 2013
  MAY 10, 2013
  
  Now I want the number of days between these continuous days of more than 9 days now, I will get the result for the above data is 10 days
  If any date is not in the list then days would not result if it is less, then are equal to 9 days
  Here is an example of another
  MAY 1, 2013
  MAY 2, 2013
  MAY 3, 2013
  MAY 4, 2013
  MAY 5, 2013
  6 MAY 2013
  MAY 7, 2013
  MAY 8, 2013
  MAY 10, 2013
  11 MAY 2013
  
  number of days here is 10 but may 9, 2013 is away at the moment, the county should not show as 10 because continuous date (May 9, 2013) is absent, that's what I need, please suggest the solution.

  using the {: identifier of the thread = 1005478}

  SQL> ed
  Wrote file afiedt.buf
  
    1  with test as
    2  (
    3  select date '2013-5-1' dt from dual union all
    4  select date '2013-5-2' dt from dual union all
    5  select date '2013-5-3' dt from dual union all
    6  select date '2013-5-4' dt from dual union all
    7  select date '2013-5-5' dt from dual union all
    8  select date '2013-5-6' dt from dual union all
    9  select date '2013-5-7' dt from dual union all
   10  select date '2013-5-8' dt from dual union all
   11  select date '2013-5-9' dt from dual union all
   12  select date '2013-5-10' dt from dual union all
   13  select date '2013-5-11' dt from dual union all
   14  select date '2013-5-13' dt from dual union all
   15  select date '2013-5-14' dt from dual union all
   16  select date '2013-5-15' dt from dual union all
   17  select date '2013-5-16' dt from dual union all
   18  select date '2013-5-17' dt from dual
   19  )
   20  select min(dt),max(dt),count(*)
   21  from (select dt,
   22        dt-Row_Number() over(order by dt)
   23        as disTance
   24        from test)
   25  group by disTance
   26* order by min(dt)
  SQL> /
  
  MIN(DT)   MAX(DT)     COUNT(*)
  --------- --------- ----------
  01-MAY-13 11-MAY-13         11
  13-MAY-13 17-MAY-13          5
  

• Can you display text after that you checked a box or not?

  Can you display text after that you checked a box or not?

  Ex:

  • Yes (please contact Bob x 3-1234) only want it to appear when you check the box)
  • NO.

  Sure. If you use a field (text field, button) to display the text, the script of the mouse to the top of the Yes box could be:

  getField("button1").display = event.target.value = "Yes"? Display.visible: display.hidden;

  Change "button1" to the actual name of the field and 'Yes' is the value of exports of the Yes box. You can use what you want, and you'll probably want to make the button read only as well.

• Layout Editor camembert - count Display instead of percentage value

  Hello
  
  Is this possible with pie charts created using Layout Editor to change the name of the percentage value, the actual number? I realize that the counter displayed if you hover over the slice of pie, but we have a requirement to show through the label.
  
  Thanks in advance,
  Jean

  This is not supported in the version current, but planned for the next version.

• CP4 - Pause a slide with several buttons and continue after clicking a specific button

  Hi all

  I know that a break has been discussed, with the idea that you can use a clickbox (tiny/transparent) to pause the slide in CP4.

  My problem is that I have a few buttons to show/hide a scenario/question in a slide that is suspended with a clickbox.  I would like a particular button to advance the slide (for example, the button 'Next').  Currently * any * button will UN-pause the slide even if all the buttons use advanced actions and are not defined for advnace slide to the click.

  Basically, I want to achieve this goal:

  http://kb2.Adobe.com/community/publishing/871/cpsid_87182.html

  Scroll down for the film and ignore everything apart as a result of clicking on the US/Europe/ISO buttons, you don't advance the slide. (I don't like on all counters/times etc.).

  BB

  (just in case it is useful to my slide includes):

  (1) invisible clickbox to pause at the top of the timeline (i.e. "put on the map"

  (2) an another clickbox with a legend of success/failure (that I want to advance the slide)

  (3) a "Hide" button that hides the name of a legend and shows another button (all with a tip action)

  (4) a "show" button that shows the 'hide' button and the legend (by peak action)

  (5) a couple of areas of turnover used to mimic navigation so that the user can click in the right place for (2).

  )

  Hello

  What's you point to one of my articles? Oh, I see now you are intrigued by the little film. It was created with Captivate 5 and CP4 is a little heavier.

  I just answered a question similar, but explained by adapting the user file. He wanted to have several areas to click that showed a text caption and offer the user the opportunity to click as many times as he wanted to in order any on those select boxes. Only when you click on the continue button (or click box), there should be a navigation to the next slide. If I understand you correctly, this is a similar case?

  My workflow: do NOT use multiple actions for areas of click to show/hide captions. He must not trust at all, and in addition you must go back the playback head to avoid it continues after clicking on a CB. Create a tip action for every click like this screenshot:

  

  Here, a single text of the legend was hidden, but can be extended to many of course. The last instruction (assignment) is important: it puts the read head back a frame, so that it remains before the point of interruption.

  I blogged about this type of micro-navigation once, but the examples are for CP5 and later versions:

  Micro-navigation in Captivate

  Lilybiri

• Need of the Movie Clip to loop continues after the end of the main movie

  Kind of a noobie questions. I want my main movie to play once, but I want that some clips of films to continue after stopping everything.

  Basically I have about six video clips (on a separate calendar) falling snowflakes. I just continue their loop than any other while what remains in place.

  I think I uncheck "Loop" in the main parameters of publication, then place an action somewhere in the clip? If you could, be very specific where to place the shares (the exact structure, in scenario clip main timeline or movie, etc.)

  Thank you very much!

  I don't know what you mean when you say 'a separate calendar', but if you have movieclip objects that animate along their own calendars, the only thing you need to do to keep them in the loop is to NOT put a stop() command in their timelines.  They will automatically loop on their own, regardless of what makes a different chronology.

• Calibrate display problems after you run the screen.

  I have a bad problem after running a screen calibrate a Spyder 3 Pro.  I've done this before and no problem, but this time, something went AWOL.  Now I have serious problems with the screen areas header and the context in which the Dock are black?

  The icon screen titles are also black text and it is impossible to see what emails are present because it is also black.

  My screen is a NEC PA272 and I tried to reset this sequel to the problem of calibration but no joy.

  In system Pref NEC display is no longer recognized it be some generic shown screen and the profile seems to be lost.

  In Safe Mode the dock is not black.

  I ran an OSX Yosemite recovery, but this does not seem to have changed anything.

  Can not think of anything else to try contacting Apple Support cat but it was difficult in these conditions and I fell the cat.

  It's weird since it's only a part of the screen with a problem, and the rest is OK.  I don't have a screen to swap to isolate the problem but everything worked fine before.

  Any ideas would be greatly appreciated, thanks in advance.

  

  

  Excellent assistance from the Apple phone is supported, problem solved.

• Problem of Timer and TimerTask for counter display all seconds on the screen.

  Dear friends,

  I have little problem in the use of the timer. I took the timer to display the counter on each period fix repeatedly. but I did not here. Please help me. The code is as shown below.

  import java.util.Timer.

  java.util.TimerTask to import;

  Import net.rim.device.api.ui.Field;

  Import net.rim.device.api.ui.UiApplication;

  Import net.rim.device.api.ui.component.RichTextField;

  Import net.rim.device.api.ui.container.MainScreen;

  SerializableAttribute public class TimerTest extends UiApplication

  {

  Timer;

  public static int COUNT = 0;

  Public Shared Sub main (String [] args) {}

  TimerTest tt = new TimerTest();

  tt.enterEventDispatcher ();

  }

  public TimerTest()

  {

  a new screen

  pushScreen (new TimerMainScreen());

  }

  SerializableAttribute public class TimerMainScreen extends screen

  {

  TimerMainScreen()

  {

  Add (new RichTextField ("Count =" + Integer.toString (COUNT), Field.NON_FOCUSABLE));

  try {}

  Timer = new Timer();

  timer.scheduleAtFixedRate (new TimerMainEvent (), 200, 1000);

  }

  catch (System.Exception e)

  {

  do nothing

  }

  }

  private class TimerMainEvent extends TimerTask

  {

  public void run()

  {

  Try

  {

  COUNT ++;

  If (COUNTY<>

  Add (new RichTextField ("Count =" + Integer.toString (COUNT), Field.NON_FOCUSABLE));

  on the other

  Timer.Cancel ();

  Timer.Cancel ();

  }

  catch (System.Exception e)

  {

  Do nothing

  }

  }

  }

  }

  }

  Please let me know where I'm wrong, I want to display all seconds on the screen. If I set the interval 0 then it run TimerMainScreen first time but after all no update, I see on the screen.

  I thank in advance

  Vimal

  Use the following Code in your race.

   UiApplication.getUiApplication().invokeLater(new Runnable()
   {
    public void run()
    {
     add(new RichTextField("Count = " + Integer.toString(COUNT)   ,Field.NON_FOCUSABLE));
    }
   });