Catalyst Control Center error arise in connection

Similar Questions

• T400, cannot start the Catalyst Control Center - error 'GPU active not supported'.

  on a machine running vista business 64-bit current t400.

  last week all was hunky dory.  This week, when I try to open my ati catalyst (CCC) control center, I have the following error:

  "ATI catalyst control center cannot be started because the active gpu is not managed.

  I read a few posts on this problem from not using the ATI graphics card and being rather on the integrated graphics card.  indicate the positions I could reactivate CCC simply by clicking on the battery icon in the system tray and selecting "mode high performance" to force the machine to use the discreet graphics card.  After I do and then try to start the CCC, I get the same error as above.  at this point after switching to the mode high peformance, my device manager also lists "mobile Intel (r) 4 series express chipset family ' as my graphics again.  If I have left or right click on the battery icon in the status bar, I don't see any options for explicitly switching cards.

  the card driver intel 4 mobile is listed as being from ATI to version 8.520.4.4000.

  I'm not sure of my version of the driver for the ATI card.  and I don't know where to look for it.

  to my knowledge, nothing but a number of 'critical' windows updates have changed on my system between the time when CCC was working last week now.

  any suggestions on how to fix this?  and what it does to stop working?

  Thanks in advance for any help.

  I finally thought to it.  and no new drivers or relocations were necessary.  at the end of the day, all I had to do was turn on version lenovo Power Manager (which appear in my taskbar like a horizontal green battery with the number of minutes of use remaining).  from there I can left click and access the menu that has the switchable graphics option where I can choose the economy of energy or high performance.  If a from there, I select high performance, I can then open CCC.

  the important thing please note this is to access this menu, you must be using power management program of LENOVO thinkVantage (sticking the Green battery on your taskbar icon), NOT windows built in the power manager, which appears as a vertical grey/blue /? battery in the tray system (at least on mine).  Once you have, you can explicitly pass the graphics cards.

  the strange thing is, I had been accessing CCC without explicitly switching the cards without problem until last week.  so in a way that the default setting should of spent high-performance energy saving, thus putting me on the integrated graphic card unless I went it manually.  weird.

  slide, thank you for your help.  I appreciate it.  and it is an interesting note on freeing more memory by disabling the switchable graphics.  I'll probably this give it a shot and see how I like it.  memory is never bad!

  Thanks again to everyone who helped.

• The Catalyst Control Center error message

  I had difficulties to show online flash videos so I upgraded my intel graphics card from Intel HD Graphics 3000 on the Intel site. Since then, I get this message:

  "The Catalyst Control Center is not supported by the version of the driver for your compatible graphics card. Please update your graphics driver from AMD, or activate your card AMD using the display manager. »

  I tried to update the graphics card (Radeon HD 7470 M) AMD but it says that is already updated to the latest version and looks like it has been activated. When I clicked on the graphics card I get this message in the device status:

  "Windows has stopped this device because it has reported problems. (Code 43). »

  I use:

  Product name: HP Pavilion dv6 Notebook PC

  Product number: A7P58EA #ABU

  Windows 7 Home Premium 64-bit Service Pack 1

  Hello ladyv128.  I understand that you are having problems with your graphics card.

  Try to install this version of the AMD driver, and then restart your laptop.

  I would like to know the result and have a wonderful evening!

• Catalyst Control Center stopped working - error CLR20r3

  Hello

  I recently bought a game, Armed Assault, which is not a whole new game and my Satellite (I'm sorry, but I don't know exactly which series) has the requirementes right good graphics system.

  I know that the GPU of my graphics (ATI Radeon 4200 Mobile) is not the best, but I had to do the graphics as low as possible to get a stable framerate.

  So, I wanted to find the graphics card with the Catalyst Control Center settings... but this no longer works, it just does not start and says that there is an error CLR20r3 and that the Application has stopped working.

  It's not bad for me, but I was wondering if I can change all the options or something like that to make the fastest GPU / more effective?

  Hello

  CLR20r3 error can be caused by damaged registry entries
  I would first recommend setting the BONE at the beginning point of time before this error appears
  Use the internal tool to restore the system Win 7.

  If this does not work, uninstall the graphics card ATI catalyst and .NET framework system.
  Then install the CCLeaner and clean the system and the registry.
  Reboot several times run CCLeaner once more and install the software deleted once more.

• Getting error while booting: "the Catalyst Control Center is not suppoerted by the version of the driver for your current graphics card.

  Original title: error message

  Whenever I turn on my computer (Windows Vista) I get the following error: "the Catalyst Control Center is not suppoerted by the version of the driver for your compatible graphics card. Please update your ATI graphics driver or enavle your ATI card using the display manager. "How can I do this? and do I do this?

  Hello

  Update the driver may solve the problem. See the following article to install/update the drivers.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download the drivers from AMD. Choose the appropriate brand and model of the device and download the drivers.

  http://support.AMD.com/us/gpudownload/pages/index.aspx

• Catalyst Control Center will not be open, with the error

  Hello

  I have a HP Pavilion dv4-3030TX laptop with Windows 7 x 64 and I'm trying to access my video card settings in the Catalyst Control Center. Whenever I try to start the program I get the error message: could not load file or assembly ' CLI. Implementation ' or one of its dependencies. The system cannot find the specified file. »

  I have erased all traces of the completely with Driver Sweeper, in Mode safe driver and then reinstalled with the SoftPaq, but I still get the same error later. A note: when I finished the installation of the graphics driver, the Installer gives me a warning that there is at least an error during the installation of the driver and gives me a button "View log", but this button doesn't appear to do anything. I searched for the newspaper myself but I have not found one.  I hope someone can help.

  Try to uninstall the fomr Catalyst Control Center and driver within programs and have section of the control panel. Once you have done this, restart your computer and try to reinstall it

  

• Error stopped work catalyst control center, shortcuts to desktop and start menu programs missing

  Original title: renovation catalist control center does not work

  I have a next message that catalist control center has stopped working. Al my desktop shortcuts are missing. They also have dissapeard since the program started.

  Hello

  1. What is the full error message?

  2. when exactly you get this error? It's trying to open all programs/applications?

  3. have you made changes on the computer before this problem?

  This error for the Catalyst Control Center is related to the graphics card installed on your computer, you can check with the manufacturer if there are any updated drivers for the graphics card, which must be installed to deal with the issue.

  Method 1:

  You can try to download and install the latest graphics drivers for your computer. You can see the following link.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Step 1:

  You can start the computer in safe mode. Check out the following link.

   Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the computer works properly in safe mode, then you can perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 3:

  You can run the fix - it from the following link.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 4:

  You can read the following article.

  Desktop shortcuts disappear in Windows 7

  http://support.Microsoft.com/kb/978980

  I also suggest you to give us the observer event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

• Satellite A100-237: I don't have the Catalyst Control Center after the installation of the driver

  Hello

  I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
  My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
  I bought Need for Speed Carbon and installed on my laptop.

  When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
  I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.

  I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
  Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
  He said that the driver is installed and system must be rebooted.

  Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
  How can I solve this problem?

  Sorry for the long letter,
  Thanks for the help.

  Hello

  As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
  You can try to use the omega site ot driver drivers Toshiba orginal...

  @aportakal
  Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory.

• dv7t-6c00Quad installed Win8Pro (final version) & ATI Catalyst Control Center fails

  My laptop is the dv7t-6 c 00 Quad and I just installed the version of Windows8 Pro (I am a member of MSDN Developer).

  Everything went fine EXCEPT the ATI Catalyst Control Center does NOT work.  I tried to reinstall the graphics driver (sp55098.exe), but it won't work because it does not "meet the minimum requirements" (which I assume means that it has not been updated to handle Windows8.

  The result is that my system has become unstable. I guess that's because the control center would deal with switching between low power and high power/performance chipsets.  I noticed that this change can occur on the fly and seems to have with a web browser (Internet Explorer).

  It's REALLY BAD, because it crashes my system.

  Please respond and tell me that there is a SOLUTION NOW!

  * Notes: I tried to launch Catalyst Control Center and get this message, "Catalyst Control Center cannot be started.  There are currently no parameters that can be configured using Catalyst Control Center".  AAARGH!

  Tom

  It's the definitive answer to AMD.  HP must deliver the updated for my portable operarting under Windows8 Catalyst drivers.  I hope it will be soon.  In fact, I'd be happy to beta test.

  Here is the answer from AMD:

  Dear Thomas,

  Your service request: SR #{ticketno: [8200508926]} has been reviewed and updated.

  History of application of Service and response:

  As AMD only provides the reference for laptops drivers (provided as-is with limited support), sometimes our software is not compatible because changes made to the graphics card from the laptop manufacturer to improve stability and performance in the laptop. The error you receive indicates that the Radeon card in your laptop is incompatible with our drivers, since the manufacturer of your laptop has changed the Radeon card enough such that our drivers will work with your product. As such, you will need to contact HP for pilots and support to download and install. We will have all the drivers for your system that will be compatible, you will be forced to go with HP. We apologize for any inconvenience this might cause.

• Re: AMD Catalyst Control Center cannot be started.

  13/08/15

  HP Pavilion

  HPE-350 t

  Core i7-860 2.8 GHz

  ATI 512 MB graphics card

  Win 7 64 bit

  I get the error msg... "Catalyst Control Center: Application host a Parisian of work."

  I am trying to access this part of a fix to win 10 do not install with the error msg... "Configuration modem host has stopped working".     Error Code C190011F

  New easy fixes for the error...   "Catalyst Control Center: the host Application has Parisians work?

  I have no problem I know.   What HP says:

  HP products - where to find Windows 10 drivers and software for my model?

  This document is for HP products that do not have software or updated drivers on hp.com for Windows 10.

• Reinstall required for ATI Catalyst Control Center after the upgrade to Windows 8

  Updated my HP Pavilion dv7 - 70232cl to Windows 8.  I don't have any problems during the upgrade.  Now I'm asked to reinstall ATI Catalyst Control Center.  The message says that my version of ATI Catalyst Control Center is not compatible with this version of Windows.  Y at - it a patch for this problem that I can download?   Thanks, jk-3003

  And the AMD Catalyst Control Center depends on .NET 3.5 installed first, otherwise it will not install.

  Launch Control Panel, select programs, click programs and features, and then click on "Turn Windows features on or off".

  Check the first box - .NET Framework 3.5 (included .NET 2.0 and 3.0)

  Make sure you are connected to the internet, because you may have to download files from Ms.

  Once this is done install your driver AMD should be fine

• the Catalyst control center host application has encountered a problem

  the Catalyst control center host application has encountered a problem and needs to close

  Hi Chowder53,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  That would happen if the card drivers to display on the computer must update or corrupt.

  I suggest that you manually download and install the latest drivers for the display card on the display card manufacturer's site, check to see if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• ProBook G1 450: Problem with Catalyst Control Center

  So I'm a gamer and I want to improve my performance, so I searched around the internet and found a thing called the Catalyst Control Center and he had an option to Overclock, I thought it was a great idea to speed up my pc, so I downloaded it, but during the installation it says it found no compatible hardware? AFAIK the ProBook G1 450 have Intel HD 4600 Graphics and AMD Radeon HD8 8750 M, so what gives? Can I get help please?

  P.S. I checked the drivers and he said I had the latest drivers installed, so I have no idea what could be the problem.

  Try this driver http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405166&swItemId=ob_154962_1&swEnvOid=4192

  If still happens once, respond with error message.

• ATI Catalyst Control Center popping up a warning

  Problem with the ATI Catalyst Control Center popping up a warning whenever I connect

  Whenever I login I get a pop up with this message: ATI Warning: The Catalyst Control Center is not supported by the 28octobre your compatible graphics driver. Please update your ATI graphics driver or card from ATI enableyour using the display manager. I went to the display manager but could not know where or how to turn the ATI card. This message has just started to appear about two months after I downloaded some windows updates ago and signed on. I am running Windows Vista Raedon HD 2400 PRO.

  Hi waters choppy.

  See the link below for a thread on the forums of AMD with a similar question, try steps mentioned them.

  http://forums.AMD.com/game/messageview.cfm?CATID=260&ThreadId=105228

  If the previous step fails then uninstall all the drivers of graphics card and software the computer later download the updated driver for the site Web of AMD and check.
  http://www.AMD.com/us/products/desktop/graphics/ATI-Radeon-HD-2000/HD-2400-Pro/pages/ATI-Radeon-HD-2400-Pro-series.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Catalyst Control Center won't open, please help

  Hello everyone I have a laptop HP DV7 - 6 c 00 with a card ATI Radeon HD 7470 M running on 64-bit Windows 7 SP1.

  Now a few days ago, I could open Catalyst Control Center (CCC) or "configure switchable graphics" but now, for some reason that I'm not able to open what makes me really upset because I've had nothing but bad luck with this laptop.

  When I was able to open CCC when I tried to configure switchable graphics, it only helped me select programs to use with switchable graphics, this is not what I wanted.

  I wanted to like my other HP laptop where if I plug my charger it asks me to change graphics card and if I unplug it, same thing.

  I could get my other laptop works correctly with the switchable graphics option in getting the last graphic card ATI radeon for this laptop, but for some reason that I can't do with this laptop. It seems that the pilot of 7470 m radeon hd can only come from HP.

  Even when I downloaded the correct driver or automatic detection utlity Radeon site, it gives me an error of incompatible hardware, and the installation is aborted.

  So very well since I wanted to correct my switchable grahics problem where it is more general (not ask me to change when I plug / unplug the charger) told me that I had to update my bios. Then I updated my bios from HP website. Here is the link I used

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5214391&...

  Okay, so after I updated my bios I've gone into bios and entered the 'switchable graphics option' and changed momentum for "fixed".

  After the reboot, I can not open the CCC (I could not open it before that the bios update or the other, I was hoping that the bios update would fix it)

  Then I tried to go to the "HP Recovery Manager" and reinstall the AMD graphics card driver, which didn't work.

  I tried to go to 'Add Remove Programs' and I tried the 'fix' of 'Catalyst Install Manager' option and it does not work...

  As I said... I am very satisfied with this laptop, it seems that it is almost a daily chore to keep this laptop work properly. Every day, it seems that I'm fixing something...

  Personally, I don't know if switchable graphics has been a great idea/option, I mean, he seems to have the best intentions in the world, but all google searches I've done, it seems hardly all work correctly.

  Now, I am a dedicated HP customer, I bought 10 + laptops and desktops Desktop 5 + years, but I am very disappointed with this laptop... or maybe I'm just upset =)

  Is someone can please tell me what I should do to get CCC works so I can set up my advanced graphics card and fix my switchable graphics.

  Now, none of the drivers were working from the AMD website, but I could try to download their Catalyst Control Center app, do you think it would work?

  I really need some advice on this one there...

  Thank you all for your time and help

  OK well first off I want to thank everyone for all their support and answers! Hahah =-)

  Well, since I've had these great suggestions, it was extremely simple to fix this problem...

  Okay well I was able to find a solution to this problem on mine and here is how I did incase anyone runs into this problem and is in need of a solution as well...

  As I said above "switchable graphics" has never worked on my HP Pavilion DV7 laptop since the first day. So in order to get switchable graphics work where he asked me "can I watch change graphics card" anytime I plug or unplug my charger for my laptop, I had to update the bios.

  After I updated the bios and rebooted the computer I had to go into the bios settings and change switchable graphics of 'dynamic'-> 'fixed '. This would allow graphics cards to move whenever the charger is plugged or unplugged, only graphic rather than spend proccessors on some applications (which is a nightmare!)

  Good then after that I updated the bios I tried to open it "catalyst control center" which does not open. After trying to reinstall the graphics driver to "hp Recovery Center" CCC would not always open.

  So here's what I did...

  First of all, I went 'Add Remove Programs' and remove the Cataylist Installation Manager

  Then, I ran CCleaner and did an analyization of my registry and delete everything that relates to the ATI graphics card, which had lots of locations in the registry.

  Then I went to the official driver from HP site for my laptop computer and downloaded the driver for my graphics driver for Radeon HD 7470 M.

  After installing the driver and restarting my computer, I could finally open Catalyst Control Center and switchable graphics finally working the way I wanted it!

  Well now, this problem is resolved...

  Right, now I always have problems with BSOD (blue screen of death) which I think that I have under control, but now I'm having a problem with my laptop which no matter when he goes into "sleep mode" and I try to take over the laptop, just of freezes and stays on the black screen, even with the light on the button (f10) wifi on and the light button mouse on...

  When it goes into sleep mode, I can't get the laptop to resume, I have to turn off it and then restart it back...

  I swear that this HP Pavilion DV7 was nothing else than to the problems of... but me, I learned a lot by setting all his questions and I hope to have this resolved as well...

  Well I hope that my experience with Catalyst Control Center and switchable graphics will help someone else's problem, and thank you all who participate on this forum (but not on my thread!)  =)

  Well, I just want to say one thing... HP makes great computer/laptop and I love them. All computers will have problems, it's just normal. I know that my next HP computer will not switchable graphics!

  gh0st-HP