Cause updates Windows vista freeze on configuration after reboot

Similar Questions

• Update Windows 7 freezes during Configuration, to 15%.

  The system configuration:

  Windows 7 Professional 64-bit (OEM upgrade), updated for Vista Home Premium 64 bit OEM.

  Seagate Barracuda 320 GB and 500 GB hard drives.

  Intel Q9550 CPU

  Card mother Gigabyte GA-EP45-UD3

  4Gb (4x1Gb) Crucial Ballistix PC-8500 Memory

  Graphics Gigabyte 8800 GTS 512 MB card

  Map its Creative X - Fi Fatality Sound

  Optiarc 24 x DVD +-RW

  Recently had a file corruption on one of my devices logitech with profiles. Tried for weeks the problem without a re - install, but nothing has worked. Decided to format for sorting. After the format, I installed the drivers and then did the windows updates which was when the PC froze during the Setup period before closing. It was left overnight to see if maybe it was just take longer than normal on 1 update, but nothing has changed.

  Had to restart and go into safe mode do a system restore to get windows to work. Tried a fix it tool updates microsoft and tried reset. There is same problem.

  Re-formatted PC, installed only eset smart security and fact updates windows. Once again the PC froze during configuration. This time, I decided to make a secure, used formattingDBAN PRNG stream with 3 assists. Installed windows and once again exactly the same problem.

  I am at a loss for what else I could possibly do to remedy this problem.

  After a-installing Eset Smart Security, the updates installed correctly... must be a problem with one of them.

• Updates Windows 7 freezes on Configuration

  Hello

  I have a brand new Packard Bell PC, AMD Athon II X 4 605th CPU, HDD 500 GB, 3 GB of DDR3 memory, running Windows 7 Home Premium 64-bit. Security is ESET Smart Security 4.

  I can load the updates, but when it restarts it stalls at 15% during the configuration of the changes. I left that night to run and it still crashes. Only remedy seems to be off and restart in safe mode and then restart again so we're back to zero.

  Only change I made to the system's security review to operate the SONOS software.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive article ofhttp://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 [1]

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a local network (i.e. other computers) and before you plug in a flash, SD card, or any other external computer diskotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: The free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool before installing updates AND BEFORE installing your new anti-virus application. [2]

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  Good luck!

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] MS stipulates that the manufacturer provide a way to reinstall Windows. If the computer came with a set of disks, there is a hidden partition restore (not to be confused with the system restore) you will use to do the clean install (AKA a destructive restore). Contact the computer manufacturer's technical support.

  [2] instead of trying to install an other ESET free trial (which can be told), consider installed Microsoft Security Essentials (free) instead: http://www.microsoft.com/security_essentials/default.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to update Windows Vista, Error code: 800B 001, "Windows has encountered an unknown error.

  Its been a while now that I can't download and update my Windows Vista Home Premium(64-bit), every time I click on install updates, it starts to download the updates, and when its done and the error occurs, code error: 800 B 001, "Windows has encountered an unknown error" and when when I try again... Error code: 80240016, "Windows update currently installed other updates. Please try again later in a few minutes. »
  I downloaded the update Windows Vista SP2 site Web Microsofts (Yes, im still in SP1), thinking it could slove the question, I can not install, when I clicked to install it, it says: "the form specified for the subject is not one supported or known by the specified trust provider."

  My Vista is genuine and activated, came with my laptop HP HDX16 1050EE.
  This issue has been hard for awhile and its a little boring.
  Thanks in advance.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. (No, Symantec Support never say this.) See if the following solves your problems:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  8 test cycle.

  NB: Your Norton application can disable Windows Defender by default.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updates Windows Vista Basic - update did not finish install

  original title: updates Windows Vista Basic

  HI: I have Windows Vista Basic, Service Pack 2. Am trying to update, but Windows Update keeps running (for long hours now!) and do not close. Any Suggestions?

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message?

  It depends on the type of Internet connection and the speed you use. You can follow the methods below and see if it works very well.

  Method 1

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  Method 2

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and install the updates manually in a clean boot state, and see if it helps.

  Stage i

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: after a follow-up of troubleshooting Step 7: reset the computer to start as usual

  Stage ii

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Check whether the problem is resolved.

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Windows Vista no longer starts after re-installation (cursor black screen, white after installation)

  A few days ago I decided that I wanted to start my Dell Inspiron 1720, back to square one. I knew that there are a few options, so I tried to restore. I realized it let me only a month back in time and my computer was slow for about a year now. I looked through my manual that came with my laptop and decided to unstack reinstall drive in and all re - install Windows Vista. I realized after I put the disk in and from the installation, I forgot to disable my anti-virus (trend pro microphone). I don't know if this is causing the problem, but after the installation, I get a black screen with a white cursor. I let it sit for about 4 hours before I decided to restart my laptop. Once I rebooted, it wouldn't let me normally, start in safe mode, or start from the last successful boot. I then tried to fix with my Vista DVD and who do not have too much work. I also tried the restore and it tells me that I am running in a low state of diagnosis and it cannot be done. I tried to reinstall vista twice since then and I'm out of ideas. Help, please! I forgot to add, when I try to start in safe mode, it stops at the ckcdisk.sys (I think it's called).

  millsx89,

  When you install Windows Vista on the 1720 Insp, you need to install the SATA drivers during installation. That's why your system stops at this point. You can also boot into the bios by pressing F2 and changing the Sata in ATA instead of AHCI operation. And then install windows. You will need to change it back once you have installed windows and loaded the drivers.

  Thank you

  Jesse

• Messages to update Windows Vista 64-bit driver for Qosmio F30 Vista 32 bit

  Hello

  Today, I noticed that, update Windows Vista displays the bad update for one of the drivers of Qosmio F30.

  I have Windows Vista 32-bit, but Windows Update post a 64 bit version of the driver.

  See the screenshot [here: http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]

  Any idea?

  Hmm... it's strange?  :|

  The ACPI from Toshiba x 64 compatible driver certainly means a 64-bit version!

  I put t know why Vista driver update notification indicates a 64-bit to a 32 bit OS driver, but usually the 64-bit driver should not be compatible with the 32 bit OS.

  However, the deal seems clear don t install if the pilot is not designed for your operating system.

  Concerning
  …

• Cannot update Windows Vista kb971468 due to the error message 800B0100__

  Cannot update Windows Vista kb971468 due to the error 800b0100 of message

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
  http://support.Microsoft.com/kb/958045

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 80070032 trying to update windows Vista

  Error code 80070032 trying to update windows Vista Hi I forgot I'm doing an update of windows & cant I disc clean up as well as other tasks that can do?
  can you help me please? Thank you please hurry my e-mail address below
  E-mail address is removed from the privacy *.

  ERROR_NOT_SUPPORTED 80070032
  Failed to create the directory or file

  Is this a sudden, new problem or a course?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• SE 8024008 error when you try to update Windows Vista 32 Service Pack 1 to Service Pack 2

  Hello

  This Dell Inspiron notebook running Windows Vista 32-bit Service Pack 1 and Windows Vista stopped editing about a year ago.  I just got the Service of update to start working again, a sort of...
  However, when I tried to update to Service Pack 2, it gave me error 80246008 and when I tried the link to fix, Services did not show the background BITS Intelligent Transfer Service () in respect of the services, so I followed the suggestions of Jose Antonio Ponton Posada CEO and tried the repair tool valid my Windows Vista 32 BIT and run the tool , but he said that repair BITS is not required on this computer.
  I checked the State of the Windows event log, and it was running.
  Please tell us how can I update Windows Vista Service Pack 1 running on this computer for the current Service Pack.
  Thank you
  Roxy111

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-vista-update-service-failure/b89bca27-9739-4bde-9f6c-a57ade14781d

• Windows Vista freezes when I try to view my pictures in windows photo gallery.

  Windows Vista freezes when I try to view my pictures in windows photo gallery.

  Even the start menu and bottom bar freeze when I try to view pictures in the Gallery of Windows, I open it with paint or another Viewer to see my photos.

  I disabled my antivirus and firewall for a while but nothing has changed.

  I have a toshiba with windows vista and intel celeron.

  Hi DianaRoman,

  Have you tried to fix it with the "difficulty it Microsoft Solution"? This solution is automated and "solve the problems of Windows Photo Gallery, such as...". You can not see the photos, the program does not work or crashes. Here is a link:

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

• My automatic updates Windows Vista do not work? Error: Windows can't check for updates

  original title: My automatic Windows Vista updates do not work?

  My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

  I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

  And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• Whenever I try to update windows Vista, I get error 8E5E0408 and 0x8000FFFF error how to fix?

  Every time I try to update windows Vista, I get error 8E5E0408 and error 0x8000FFFF. What are the mistakes and how to fix?

  0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414>