CC bridge and ACR unbearably slow

During research on the question of a slow bridge CC, I know I'm not the only one, nor is it a new problem. I've read a lot is almost a year. Despite paying for CC for about 9 months, I always use CS6. I had the hope that the new CC 2014 would solve the problems of performance of bridge.

I use a system of six cores with 32 GB of ram, SSD for my OS and programs, a 1.5 TB drive empty dedicated to the cache, on a win 7-64 bit OS. CC bridge and camera raw are so slow, that I can't use them.  My only comparison is CS6 and using the same settings for both programs.

When opening bridge CC on file that has been previously cached and responsible for opportunity, it took ~ 51 seconds of 'strengthening the criteria' before I could see the types of files, notes and details in the filter box. In other words, I don't see any information in the box of filters for the time. I made sure the inches have been completely loaded in the cache until I closed the bridge CC and opened the program in the same folder. The same folder in Cs6 takes ~ 4 seconds to load...

I also have performance problems in ACR.

I edit lots in ACR as homologous lightroom do but bridge CC more ACR are too slow to work with.

I chose the same 20 raw files in each case.

Bridge CC camera raw 8.5 took 5 seconds of a symbol from the previous day to load the files in the dialog box camera raw after hitting CTRL R

No retouching or changes have been made to the files.

When I click the next image in the list (always in camera raw) there are 0.5 to 1 second of the icon shows to load the next raw photo in the batch.

in CS6 I selected the same 20, CTRL R not edited RAW files and they load immediately. I can spend the raw file to the RAW file without hiccups or delays. 5 seconds vs instant. I did build a system of six leading to waiting for things to load.

not exactly scientific, but that's the difference I see. Bridge CC is dead to me. To make sure I wasn't crazy, I clicked on a recent folder with only 80 raw files, jpg small respective 80 and a few video files (4.5 GB of data). It took so long that I freaked out that I moved the files in a backup location instead of copying. After 30 seconds, I stopped counting, open Windows Explorer, traversed the backup folder, copied the files and was getting ready to stick to what should have being the original location and then Bridge decided he was ready to work. For that ~ 60-85 seconds there was no icon shows, no circle of spinning or "construction criteria. It just looked as if I was watching an empty folder.

Any suggestions?

Try this thread: CS6 E bridge slow to load thumbnails, 'building criteria'

Tags: Bridge

Similar Questions

  • Lightroom is really better than a bridge and ACR?

    I use Bridge and ACR for years. I have been turned off to learning Lightroom, but feel I can do is not so much because it seems the standard for photo editing.

    So I sat down and tried to understand, and it was a pain in my butt. I guess that's just the learning curve, but it is not as simple as I thought it would be.

    Is it really that much better than ACR and bridge? Should I even waste my time to learn?

    If you have a good Bridge/ACR workflow then technically has no interest that Lightroom if you compare editing capabilities. Lightroom and Camera Raw have both share the same raw processing engine. You can get the same results of both programs. I switched to Lightroom years because I just love some of the things in the interface is better I like to work with Camera Raw. But it's my choice. I take no sides of the cataloging features as much as I can in Lightroom. I use it mainly for the develop module features. And I want to print from Lightroom as well. I don't think you should feel loose or lower when you talk to other photographers, just because you use Camera Raw and Bridge. Tools can give identical results. It's mostly a matter of choosing which is best for you.

  • Contacts and CardDav unbearable slow

    Contacts is slower and slower using Mac OS x Server (owncloud). It was already late with 10.10, but it is impossible to use with 10.11.

    I use an OwnCloud server connected to the Contacts through Mac OS x Server. Synchronization is fine, using Contacts is fine, but edditting and create contacts is a pain. I have less than 500 contacts. I get the spinning wheel just by pressing the button edit in contact.

    Anyone know a way around this? At the moment I'm back to edditting my contacts on the iPhone and it sync only at El Capitan...

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • CS 6, bridge and ACR-help with missing features

    Hello

    I have learned through acr and CS 6 videos. The videos were created by Piet van den Eynde, he uses an Apple Mac, I have a Windows based pc, but I don't think that's the problem.

    While it is in raw, it has option to switch between the open photo and one before and after when editing in Raw. There is also a Radial filter then the graduated filter also, I don't have in my version.

    The versions are the same, why this option is not available in my program, I have the full version, I can't find any setting in the preferences for these options.

    Help, please!

    The video tutorial was created using Photoshop CC (creative cloud). The features that you are looking for our new features that are available only in Camera Raw when running under the CC version. While the new versions of Camera Raw will run with Photoshop CS6, the new features that have been added to Camera Raw since the introduction of the version of creative cloud will be unavailable.

  • I did updates in Bridge and Photoshop but now Camera Raw custom to treat my D610 Nikon RAW files.  I did the update this morning, ACR still does not.  Help!

    Help, please.  Last night, I did the update prompted by my subscription creative cloud and files where viewable and editable in Bridge and Camera Raw yesterday cannot be converted today.  Small thumbnails of some of the images are visible in the bridge, but not all.  And none are adjustable in Camera Raw.

    I restarted my PC.

    Still no change.  I did another update of the bridge and then restarted.

    No change.  I did the update to Camera Raw 9.1 then restarted.

    Still no change.

    It is huge for me time burden as I have jobs and assessments due.  Please tell me what to do.

    Support had me ctrl + alt pressed I open the bridge.  It has a reset option.  Once I reset and purge the cache location problem has been resolved.

  • Crop rotation/unbearably slow in Lightroom CC 2015 1.1 (latest version) running on a Macbook Pro retina recent 15 "

    Hi all

    I'm one of the only ones left to having this problem?

    I use the latest version of Lightroom on a MacBook Pro 15 "retina with 16 GB of RAM which takes place the last OSX.

    CC of Lightroom is unbearably slow when you use the crop tool or rotating. I tried to purge the caches, to remove previews, enabled/disabled the GPU on and outside, my insights into the dimensions in pixels, of downsizing disabled wireless (and CC app), switched we / off external display (an old Eizo) - even an uninstall complete and reinstall. Yet the cropping function is near UNUSABLE.

    ADOBE Please HELP!

    Gregers

    If the problem goes away when you run the system at boot, it means that there is another application that runs in the background that is gobbling up system resources that Lightroom requires to work properly.

    Here is information on what is happening with your system when you start start-up: try safe mode if your Mac does not commissioning - Apple support in the list of the things that happens with Safe Boot, here are the two who most likely apply to the situation at hand:

    • Loads needed kernel extensions only
    • Prevents elements start and the login items open automatically

    First, disable all applications that are running in the background as it was a startup item or element of connection. Take control of start-up and connection elements. Macworld

  • How to Bridge and Lightroom to respect - read - metadata changes?

    I have my images of marriage in bridge (6 CS) of the reform and then export them into LR 4.  I usually rate the images I started to reform, but when I import these images in LR, the sides are not.  Similarly, when I tag the images in LR and export, bridge shows all white color labels - no matter what the label was actually awarded.

    LR saves all changes and other changes to metadata in its database (= catalog).

    In addition to the catalog, you can , namely a xmp (in the case of a Raw photo) file, or in the header (but not in the pixels of the image!) of a JPG, TIFF or PSD.

    Backup to the folder is

    _ either check the box > Edit > catalog settings > metadata tab, or manually

    _ by going > metadata > save metadata to file (in the Lr library Module), or

    _ by going > Photo > save metadata to file (in the develop Module.

    When you manually save the file, you can select several photos in the grid view and .

    This saving to the file is necessary so that bridge can read and display changes to Lr, because the bridge is unable to read the Lr catalog.

    Bridge of saved file automatically (there no option of deselection of her) and Lr will read the bridge metadata when you import the image in Lr.

    In the case of an image that is already in Lr, you must select > metadata > read metadata from file (in Lr library Module), or

    going > Photo > read metadata from file (in the develop Module). Without this , Lr displays all changes made to the bridge after importation in Lr. Since this would replace all the different changes that you made in Lr, it is best to do this before you more editing in Lr.

    The rating stars would transfer of bridge to Lr and vice versa without problems.

    For color labels to properly transfer you must make textual descriptions for individual colors identical to Lr and bridge - to upper/lower case, commas, and hyphens, underscores, traits, etc..

    That being said:

    I would recommend that you use no bridge for the slaughter of your images. You can make easy logging to Lr. When you manage photos in Bridge and in Lr, you will always have the problem of synchronization of metadata. This can be done, but it needs a flow of meticulous work that is strictly adhered to.

    There is nothing in the deck than Lr only *). Simplify your life, choose Lr as your only management and image editing tool, with the exception of CS6 itself (I want to say Photoshop itself, not the ACR).

    *) Well there is one thing: since Lr is not a program based on a browser, it does not automatically "see" what's on a hard drive. Photos must be imported so that Lr will 'see' them.

    Bridge is browser-based. Which photo is saved on a hard drive - regardless of what program to put there - it will be "seen" by bridge.

    Bridge is a valuable tool if a photo is not displayed in Lr and want to check if it is in a particular folder.

  • Install the converter DNG RAW 7-2 of my Office Bridge and Photoshop?

    I have a Sony A99 DSLR that is now supported by Adobe.  I downloaded the 7_2 converter DNG (RAW) to my office.  How can I install in Bridge and Photoshop?

    DNG converter is a stand-alone tool. For Photoshop / bridge you must have the corresponding version of Camera Raw (ACR). Refer to this:

    Applications of camera Raw compatible Adobe

    Mylenium

  • Camera Raw 5.6 Bridge and Photoshop CS4 - back to the original image

    New for Raw formats, bridge and CS4:

    Question: I understand that when I opened the bridge images in Camera Raw, and then expand them changes aren't destructive or permanent, BUT I don't know how to get an image to its original data after I changed it. I don't know how to return the image to the original in Camera Raw or when I clicked "Done", returned to the bridge and want to, then try again with the original. How can return an image to its data or the original look?

    Help would be appreciated.

    Mary Ellen

    In Camera Raw select Camera Raw default in the context menu of the ACR or Bridge, select Edit > develop settings > clear to go back to a virgin state parameters...

  • Captian El 10.11.6 running on my Mac Pro 2012 and it is slow suggestions

    Captian El 10.11.6 running on my Mac Pro 2012 and it is slow suggestions

    You can view a report of etrecehck for later analysis

    www.etrecheck.com

    BTW the 'Mac Pro' is a desktop system, the MacBook Pro is one of the three Apple laptop models.

  • Since this morning my Thunderbird is not - responding whenever I try to open or send an email it is not responding and is very slow and I have to close it. Difficulty?

    Since this morning my Thunderbird is not - responding whenever I try to open or send an email it is not responding and is very slow and I have to close it. I tried to delete the global-messages - db.sqlite but it does nothing. Any ideas?

    Check if this happens in safe mode:

    Did you try to compact your email?

    And the record of repair?

    • Click with the right button of the mouse on Inbox > > Properties > > File Repair
  • Clicks and highlighting deadly slow in Mail since 10.11.4

    Since the upgrade to 10.11.4, Mail is behaving very oddly.  Everything that requires a click to the trackpad is slow.  Click on the text and it takes 2 seconds for the cursor to appear.  Underline text even.  By clicking on send, the same etc.  But if I use a mouse, not the trackpad, it works great!  I checked Activity Monitor and Mail is hogging a huge amount of CPU (see the attached screenshots - more than 100% of the processor, although it falls, if I work in another application for a while).  Mail is good after the relaunch, but after using it for 10 to 15 minutes, clicking them and highlighting becomes slower and slower.  I've disabled all Mail modules and uninstalled my trackpad utilities, but none of this makes no difference to the problem. Trackpad clicks, etc. function as usual in the Finder and all the other apps I've tried.  Only problem is Mail.

    Click on the trackpad and train takes 2-3 seconds to appear in the Mail.  NB: Trackpad normal activity in the Finder and all the other apps I've tried.

    One workaround is to use the mouse.  Quitting mail and reboot (or restart computer), back issues of normal responsiveness for about 5-10 minutes - but then very slow cursor and highlighting of the statements.  Have you checked the folder cache Mail in ~/Library and files inside are tiny.  Key issue seems to be that Mail consumes all CPU.  I know for a fact, that he did not have it before.  But I'm not skilled enough, (you) to know why this could be.

    End of 2013 MacPro running 10.11.4.  Last Apple magic trackpad.

    It is quite confusing.

    I don't know what is happening with the trackpad, but I will comment that General hgih CPU usage is NOT normal. Indeed, my use of the UC Mail went down with 10.11.4

    So the first question is "what is upward with the CPU usage?

    I disable my email one by one accounts and see if it changes. If so, (and room IMAP or your e-mails backed up) remove and re-create the account. I guess that something has been altered in the upgrade.  You can also try to rebuild the mail files (which rebuilt the index therefore eliminating a source of error). One of these could get him to do a lot of work in error.

    But nothing is specifically on the touchpad.

    You have a pre-upgrade backup, boot-able you might come back and try the 10.11.4 upgrade? His usually smooth, but with millions of users, there are always a few that go wrong.

    Grant

  • Mac keeps restarting and is very slow running

    Why not keep restart my mac and works very slow since I installed El Capitan?

    Most likely because you upgraded an already dysfunctional system without the first fix. Or your HARD drive may be faulty.

    Try these in order to test your system after each see if it is back to normal:

    1. a. reset the PRAM and NVRAM on your Mac.

    b. Macs with Intel processors: reset of the controller (SMC) system management

    2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

    HD recovery start: restart the computer and after the buzzer, press on and press and hold the

    COMMAND and R keys until it appears the Utilities menu screen.

    3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

        When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

        back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

        ends, then quit disk utility and back to the main menu.

    4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

    Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.


    When you get it working properly, and then download and reinstall OS X El Capitan 10.11.3 Combo Update.

  • WAP300N as bridge and extender

    Is it possible to use the bridge and Extender mode at the same time with 2 WAP300N access points? I currently have a home network, where I have 2 access points wireless enabling to connect wireless devices and are bridged also to connect 2 cable networks. I want to know if I can get the same thing with 2 WAP300N devices.

    Hi, jochem.harteveld. Apparently, you can select a mode of operation at the same time.

  • routers and access points and bridges and lions and tigers and bears oh my

    I studied and I'm still lost. Help please.

    I want the following configuration.

    Bedroom #1: contains my cable modem and a wireless device (wireless router I think).

    Bedroom #2: notebook with built-in wireless.

    Bedroom #3: several components (computers, printers, etc.) that are located on a wired LAN.

    What is the only wireless device that I can add to local wireline in the bedroom #3 for the device on the lan connect to internet through the device wireless in bedroom #1 and also connect to the laptop in the room #2.

    I want to all devices in the home to be on the same network (net sub?)-simple file sharing, sharing printers, etc.

    After hours of searching the Internet, I still don't know if the required device in the room three is a wireless access point, a wireless bridge and a switch, a wireless bridge and a hub, a tin man or cowardly lion.

    Lost in Oz, waiting for the Wiz (i.e. you)

    The Tin man would be the ideal solution. It could carry the USB with the information in both directions.

    Without Tinman, it gets complicated. You have several options. Ideally, I would recommend to connect a cable and not rely on a wireless bridge. It saves you more wireless bandwidth, is faster and more reliable. If it must be wireless:

    Option 1: Get a wireless, as the Linksys wet bridge. A wireless bridge connects to a wireless network existing and bridges the computer connected to the bridge across the network without wire on the other side (i.e. your router, other clients wireless and internet etc.)

    Option 2: Get a more flexible as the Linksys WAP access point. WAP can be configured as a bridge but also as repeaters and other modes. A WAP browser may be preferable to a WET if you also want a stronger additional wireless signal in the 3rd room. However, a WAP browser is much more expensive and more complex to configure.

    If you want only by cable in the 3rd room or the first room wireless signal is strong enough for the customers in the 3rd, just a wireless wet.

    To connect these devices wired in the 3rd room get a switch. Do not get a hub (if you get one free somewhere). Today, most of the devices are switches in any case, I guess. Never connect a real hub in a wireless bridge. A switch manages all the traffic between the devices connected to the switch directly in-house. A hub can cause additional traffic sent across the bridge...

Maybe you are looking for

  • several profile on firefox 37.0.2 (ubuntu 64-bit)

    HelloI've upgraded my firefox to version of the end (36 to 37.0.2) in the previous version I can run 2 profiles at the same time, but after upgrading to 37.0.2, I can not run both profiles at the same time.When I run "firefox - P-no-remote &" during

  • After the recent upgrade, the disappearted function (on the Internet) download of the toolbar.

    After a recent automatic upgrade several days ago, the download of download Internet swirling icon function disappeared. Can't find any information on how to do. Running Mac Os 10.6.8 Firefox 14.0.1 Most would appreciate the help in the restoration o

  • SE connect/disconnect the 3g automatically

    Hello We have a Toshiba Portege R600, and working with a docking station to the office (with ethernet). But when you work in a home, we using 3g networks. My problem is when disconnect us the docking station, we are setting in network 3g connected au

  • Floppy disk drives for Satellite Pro 4200 and 4300 series

    I have four portable Satellite Pro - a 4340, a 4310, a 4270 and a 4280 and I have trouble getting the 4310 and 4270 to recognize a particular floppy drive. My understanding is that Mitsumi D353G FDDs were consistent with these laptops 4200 and 4300 s

  • adding ram to Pavilion 6449

    I have a pavilion with 2 GB of RAM dv6449us.   This is the limit which can be installed as is deducted from what I could learn or can it be improved to, say, 4 GB of RAM or more.   The CPU can be improved?