CS 6, bridge and ACR-help with missing features

Similar Questions

• Lightroom is really better than a bridge and ACR?

  I use Bridge and ACR for years. I have been turned off to learning Lightroom, but feel I can do is not so much because it seems the standard for photo editing.

  So I sat down and tried to understand, and it was a pain in my butt. I guess that's just the learning curve, but it is not as simple as I thought it would be.

  Is it really that much better than ACR and bridge? Should I even waste my time to learn?

  If you have a good Bridge/ACR workflow then technically has no interest that Lightroom if you compare editing capabilities. Lightroom and Camera Raw have both share the same raw processing engine. You can get the same results of both programs. I switched to Lightroom years because I just love some of the things in the interface is better I like to work with Camera Raw. But it's my choice. I take no sides of the cataloging features as much as I can in Lightroom. I use it mainly for the develop module features. And I want to print from Lightroom as well. I don't think you should feel loose or lower when you talk to other photographers, just because you use Camera Raw and Bridge. Tools can give identical results. It's mostly a matter of choosing which is best for you.

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• Help with missing folder blackBerry Smartphones

  Hello. I have an account taken on my phone plus two other internet e-mail (Yahoo and AOL) accounts. I had two folders - one that would list all incoming calls as well as mail that came on behalf of the company and a folder for the account of the company.

  The record for one who lists incoming/missed calls, calls with missing mail the other day. The phone should not have been locked, was in my wallet, and did her own thing.

  Now, I received phone calls, it shows that I have "e-mail", but when I check the accounts, all mail was read. I can't access the "folder" where calls are listed to delete missed calls.

  How can I fix?

  On the home screen press Menu page (key BB), and select Show all.

  Check now if your main Message folder showing or not, if present, then just select press Menu, and then click Show.

  I hope this wil help you... !!

• CC bridge and ACR unbearably slow

  During research on the question of a slow bridge CC, I know I'm not the only one, nor is it a new problem. I've read a lot is almost a year. Despite paying for CC for about 9 months, I always use CS6. I had the hope that the new CC 2014 would solve the problems of performance of bridge.

  I use a system of six cores with 32 GB of ram, SSD for my OS and programs, a 1.5 TB drive empty dedicated to the cache, on a win 7-64 bit OS. CC bridge and camera raw are so slow, that I can't use them.  My only comparison is CS6 and using the same settings for both programs.

  When opening bridge CC on file that has been previously cached and responsible for opportunity, it took ~ 51 seconds of 'strengthening the criteria' before I could see the types of files, notes and details in the filter box. In other words, I don't see any information in the box of filters for the time. I made sure the inches have been completely loaded in the cache until I closed the bridge CC and opened the program in the same folder. The same folder in Cs6 takes ~ 4 seconds to load...

  I also have performance problems in ACR.

  I edit lots in ACR as homologous lightroom do but bridge CC more ACR are too slow to work with.

  I chose the same 20 raw files in each case.

  Bridge CC camera raw 8.5 took 5 seconds of a symbol from the previous day to load the files in the dialog box camera raw after hitting CTRL R

  No retouching or changes have been made to the files.

  When I click the next image in the list (always in camera raw) there are 0.5 to 1 second of the icon shows to load the next raw photo in the batch.

  in CS6 I selected the same 20, CTRL R not edited RAW files and they load immediately. I can spend the raw file to the RAW file without hiccups or delays. 5 seconds vs instant. I did build a system of six leading to waiting for things to load.

  not exactly scientific, but that's the difference I see. Bridge CC is dead to me. To make sure I wasn't crazy, I clicked on a recent folder with only 80 raw files, jpg small respective 80 and a few video files (4.5 GB of data). It took so long that I freaked out that I moved the files in a backup location instead of copying. After 30 seconds, I stopped counting, open Windows Explorer, traversed the backup folder, copied the files and was getting ready to stick to what should have being the original location and then Bridge decided he was ready to work. For that ~ 60-85 seconds there was no icon shows, no circle of spinning or "construction criteria. It just looked as if I was watching an empty folder.

  Any suggestions?

  Try this thread: CS6 E bridge slow to load thumbnails, 'building criteria'

• The chain is be ignored and need help with why?

  Hi all.

  I hope again with help from the community.

  There is a chain created (code below) and it runs with success - at least she built MOST of the tables.

  The problem is: the last three tables all rely on the same condition and only two of them pass.

  The code below, step 4, steps 5 and 6 are all dependent on the success of step 3.

  When work for this string is executed, all stages of execution fails with the exception of step 5.

  The interesting thing (to me at least), is that regardless of the generation of the table is step 5 fails.  For example, in the code below prog_Y is attributed to step 5 and it fails.  If I swap prog_Y to step_4 and prog_X to step_5, step_5 still does not work.  Same result if prog_Z is listed as step 5.  While steps 4 and 6 to run correctly.

  Further info in job run lists of details: table or view does not exist.  However, I confirmed the procs behind programs every summer executed successfully and the tables exist.

  I tried several things to get more information: change the numbers.dropping/redefining step leaving down the chain and redefine, retype the steps and rules.

  Help, please.  Suggestions of why this step 5 may be at fault or where to find more information is super useful.

  Thank you very much

  Fritz

  When the string is executed partially

  /* 1. Create the string * /.

  BEGIN

  () dbms_scheduler.create_chain

  CHAIN_NAME = > 'dgr_cmpl_chain ',.

  RULE_SET_NAME = > null,

  EVALUATION_INTERVAL = > null,

  Comments = > 'Chain that loads tables of degree completion.');

  END;

  /* 2. Define the steps of the string * /.

  BEGIN

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_1".

  program name = > 'prog_intrmdt_1');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_2"

  program name = > 'prog_intrmdt_2');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_3"

  program name = > 'prog_base');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_4"

  program name = > 'prog_X');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_5"

  program name = > 'prog_Y');

  DBMS_SCHEDULER. () DEFINE_CHAIN_STEP

  chain_name = > 'dgr_cmpl_chain ',.

  step_name = > "step_6"

  program name = > 'prog_Z');

  END;

  /* 3. Add rules * /.

  BEGIN

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > 'TRUE ',.

  action = > 'START step_1. "

  nom_regle = > 'rule_1. "

  Comments = > 'String degree start.');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_1 succeeded."

  action = > 'START step_2. "

  nom_regle = > "rule_2");

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_2 succeeded."

  action = > 'START step_3 ',.

  nom_regle = > 'rule_3');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_4 ',.

  nom_regle = > 'rule_4');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_5 ',.

  nom_regle = > 'rule_5');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > "step_3 succeeded."

  action = > 'START step_6 ',.

  nom_regle = > 'rule_6');

  DBMS_SCHEDULER. () DEFINE_CHAIN_RULE

  chain_name = > 'dgr_cmpl_chain ',.

  State = > ' completed and full of step_5 step_4 and end step_6 "

  action = > "END."

  nom_regle = > 'rule_7');

  END;

  /*

  */

  /* 4. Select the string * /.

  BEGIN

  DBMS_SCHEDULER. SELECT ("dgr_cmpl_chain");

  END;

  /* 5. Create a job that points to the string. */

  / * Wizard of work used to create jobs * /.

  Thanks a lot for your suggestions.  Very grateful.

  Looks like this may have been a self-inflicted error.

  There were a few other errors which confuse this explanation.  But today, this seems to be the most likely case.

  The END condition was initially step completed 6.  Turns, then step 3 successful, all the steps 4, 5 and 6 began at the same time.  Well, step 6 was shorter than the 5 step execution time.  So step 6 would end, and the end to trigger the end of the string before step 5.

  This worked constantly since the END condition has been updated in order to assess the steps, 4, 5 and 6.

  Fritz

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• 4530 s: need help with missing drivers

  Hello
  I recently had to replace the HARD drive in my HP ProBook 4530 s (A6G60ES) I did a clean reinstall of Windows 7 Professional x 64.

  It works fine, but however, now I'm missing lots of drivers and Windows Update is not help. The page of the HP product is also very confusing, because there are so many different network drivers to download for example, but I don't know which are made for my model. Unfortunately, Googling my A6G60ES model does not have a majority.

  So these are the drivers that miss me:

  Base system device
  Hardware ID
  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Base system device
  Hardware ID
  PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30
  PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C
  PCI\VEN_197B & DEV_2393 & CC_088000
  PCI\VEN_197B & DEV_2393 & CC_0880

  Network controller
  Hardware ID
  PCI\VEN_10EC & DEV_8176 & SUBSYS_169F103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_169F103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  (USB) Universal Serial Bus controller
  Hardware ID
  PCI\VEN_1033 & DEV_0194 & SUBSYS_167C103C & REV_04
  PCI\VEN_1033 & DEV_0194 & SUBSYS_167C103C
  PCI\VEN_1033 & DEV_0194 & CC_0C0330
  PCI\VEN_1033 & DEV_0194 & CC_0C03

  Unknown device
  Hardware ID
  USB\VID_138A & PID_003C & REV_0086
  USB\VID_138A & PID_003C

  Module of high speed Mobile HP un2430
  Hardware ID
  USB\VID_03F0 & PID_371D & REV_0002 & MI_00
  USB\VID_03F0 & PID_371D & MI_00

  Module of high speed Mobile HP un2430
  Hardware ID
  USB\VID_03F0 & PID_371D & REV_0002 & MI_01
  USB\VID_03F0 & PID_371D & MI_01

  Module of high speed Mobile HP un2430
  Hardware ID
  USB\VID_03F0 & PID_371D & REV_0002 & MI_02
  USB\VID_03F0 & PID_371D & MI_02

  Module of high speed Mobile HP un2430
  Hardware ID
  USB\VID_03F0 & PID_371D & REV_0002 & MI_03
  USB\VID_03F0 & PID_371D & MI_03

  I'm pretty confident that the network controller is indeed Realtek RTL8188CE, at least it works even if it is incorrect, but I know not at all on others.

  I would appreciate if someone could help me identify these drivers. I hope that using hardware ID, according to me, one of your customer service agent said that they can be useful.

  Hello:

  Here are links to the drivers you need...

  Base system device:

  Media JMicron card reader driver allows the integrated multimedia card mobile slot supported with supported operating systems.

  File name: sp52344.exe

  Network controller:

  This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

  File name: sp57049.exe

  (USB) Universal Serial Bus controller:

  This package contains the Renesas USB 3.0 driver. This driver is available for the models of laptops with operating systems supported.

  File name: sp54511.exe

  USB\VID_138A & PID_003C & REV_0086:

  This package contains the driver that allows the probe of ValidityFingerprint in the notebook models that are running the asupported operating system. The scansfingerprints of sensor of fingerprint for use with biometric security applications.

  File name: sp66915.exe

  Module high speed Mobile HP un2430:

  This package provides drivers for the add-on high-speed Sierra Wireless HP un2430 Mobile and is available on mobile phones supported running a supported operating system.

  File name: sp54104.exe

• Help with missing driver AZ-621 - what is it, where to find?

  I have an Acer AZ-621 all in one and I'm trying to get the drivers list filled in computer management. I don't know what the driver is below, or where to look for this, any help appreciated.

  Controller PCI encryption/Decyption-

  the PCI driver is listed as PCI VEN_8086 & DEV_0F18 & SUBSYS_1105152D & REV_0E

  After hours of research I came across free fantastic tool IObit driver Booster and 8 driver updates required, including those missing. All are now updated!

  Why is it not as easy on an own website of manufacturers? Well, everything is OK now :-)

• What is the 'Live' page and need help with the data merge

  Hello

  Im very new to indesign naked with me. Im trying to merge data (need to create a fusion template?) and what I understand is that I need to be on the page 'Live '. Someone on the forum suggested this...

  There are two ways to set up the model of fusion. You can put your placholders on the master page or on the live page. If the placehlders are on the master page, only the frame (s) with placeholders, as well as other grouped objects, will be duplicated. On the live page, ID will try to duplictate EVERYTHING on the page, so you must be very careful about installation and sizing of objects.

  I want to be on the LIVE page... How can I do this? Got any other sort but can't get several records for the life of me to come.

  Thank you for your help adavance

  It is the opposite of multiple records per page. Make x copies of a single record on a page, put x sets of organized placeholders as you want on the page. A good way to do it is with Edit > step and repeat after you set up the left superior set. Now merge as one record per page.

• I'm new construction sites and need help with boxes of zoom

  I'm currently building a website with a shopping cart, before getting to the basket I'd like to see an option for expansion of each element. They see the regular image and then if I could add a button they can click to view a larger image. Unfortunately I do not have the Web site on a server at this time. Any help you can give me would be appreciated. Thanks in advance.

  Try this:

  http://ALT-Web.com/demos/jQuery-disjointed-image-gallery.shtml

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• new to pl/sql and need help with the procedure

  Hello, I got two personnel and BONUS tables which are not bound by constraints
  
  STAFF
  ID_NUMBER HIREDATE SALARY BONUS
  ---------------------- ------------------------- ---------------------- ----------------------
  100020 12 MAY 03 13600
  100021 4 NOVEMBER 01 30000
  100022 8 APRIL 02 28000
  100023 8 APRIL 02 24000
  
  BONUS
  
  PERCENTAGE MORE_THAN_YEARS
  ---------------------- ----------------------
  0.1-3
  5 0.15
  0.3 7
  9 0.45
  0.5-12
  
  
  I am trying to create a procedure that would calculate bonus based on years of employment according to the bonus table.
  If employees sysdate-hiredate is greater than 5, it is salary*0.15%...
  I created this procedure, but I am stuck here.
  
  I calculated the duration of employment for each soldier using the slider in a loop, but I don't know how to get the bonus Board values and connect with each other.
  Please help me!
  
  create or replace
  procedure bonus_staff
  as
  cursor c1 is select * personnel;
  good true;
  Start
  FOR ITEM IN C1
  LOOP
  good: = FLOOR (months_BETWEEN(SYSDATE,ITEM.hiredate)/12) *.
  personal update
  set bonus = good
  where id_number = ITEM.id_number;
  When exit c1% notfound;
  end loop;
  end;
  /
  
  Thanks in advance...

  personal update
  set bonus = (select percentage
  bonus of
  where more_than_years = (select max (more_than_years)
  bonus of
  where more_than_years<=>
  )
  /

  You can do this in pure SQL, which operates on a game, so no PL/SQL is necessary.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• I have HP Deskjet 3050 a all-in-One Printer - J611g and need help with printing, please?

  I just bought the HP Deskjet 3050 all-in-one printer-J611g a. The manual has shown to do the printer double-sided printing odd pages then only print even pages only, and it works very well for one page on one side of the sheet. However, when I want to print two pages on one side of the paper and another of two pages on another aspect of the sheet, print the odd pages or even pages only just does not work! Ditto to print more than one PowerPoint presentation on one side of the page, if I click on print the odd pages only, then the printer will display the odd number of powerpoint slide instead of print odd number. I used to have another printer HP Officejet and never had any problems with two-sided printing. This printer comes with the function double-sided printeing at all?  If so, how can I do duplex printing?

  Thank you very much!

  This is a limitation of the software that you use and how the HP printers recognize the incoming files. When compress you multiple pages on a single "page" this page is actually two pages, with even and odd numbers. It is therefore difficult for the software to determine the page numbers 'odd' and 'even' when printing, because it is no longer applicable to the relevant pages, but the format in which they are being printed.

  I hope this information is useful!

• Webcam and keyboard help with dv6-3008so

  First and most important of all, I would like to ask if there is a way to disable the buttons to quick launch on the keyboard (mediasmart, browser etc.)?

  Secondly, I would like to ask if there is a way to change the advanced settings on the built-in webcam? Colors and so on. Right now my webcam doesn't work well when I'm in the light of the Sun, but if I use ordinary lamps, or something, we can barely see my face because it's too bright and the colors are far away.

  If it helps, I am currently on Win7 home premium 64 bit.

  Here are the tweak reg for one-touch keys side (it's what we call them)

  Key by e-mail: HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\Appkey\15 'Association '=' mailto'; Delete the string value "mailto"

  Internet key: HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\Appkey\7 'Association '=' http'; Delete the string value "http"

  Calculator key: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18 'ShellExecute "=" calc.exe "; Delete the string value "calc.exe"

  Mediasmart key: HKLM\SYSTEM\ControlSet001\Control\MobilePc\HotStartButtons\1 "Application" = "file C:\Program (x 86) \Cyberlink\PowerDVD9\PowerDVD9.exe"; Delete the string value "C:\Program File (x 86) \Cyberlink\PowerDVD9\PowerDVD9.exe.

  On the webcam stuff, you're not able to make changes to the properties of the Capture filter...

• OSX El Capitan - bridge and switch program with cmd + tab, does not always

  Hi all

  We are having the same problem on iMac 5, El Capitan and whole Addobe CC Pack running.

  Formerly bridge freezes a bit and sometimes cmd + tab I does not. The user can switch program´s if they tap the icon in the dock.

  The iMac´s have been respect resettled 3 months ago - Imac 27 "in 2013, 32 GB of ram, 1 TB latest version by car, Wacom Intuos 4, Fuzion Adobe CC, 1 screen next to the generation of 27".

  Hope to hear from someone out there

  Hi Allan,

  We released a new version of THE bridge bridge CC 2015 July 19, 2016. Please install from your application client creative cloud and check if the problem persists.

  If bridge CC 2015 does not appear under the applications Panel, click the gear icon and select 'Search app updates' or sign out and sign back to the creative cloud desktop application.

  I tried to run the cmd + tab switch between google chrome and bridge CC 2015 on Mac OSX 10.11.6 the workflow and I faced no question too.

  Kind regards

  Gerard