CC disappeared after the Windows system restore.

Similar Questions

• I need to recover the Favorites after a Windows system restore.

  After doing a restore of windows on Windows 7 Pro, I have only the default bookmarks on my view your bookmarks"" button. In a backup of the system a few months ago, I got the files and folder Appdata Firefox Profiles. I tried to replace the new profiles of 'empty' to the former, but without success - I still have only the default bookmarks. Thanks in advance for your help.

  Note what to do a system restore will probably replace the profiles.ini file and all the profiles that are made after the date of restoration will not appear or be accessible through the Profile Manager.
  
  If profiles are still there, then you can use the Profile Manager to create a new profile and choose the location of an existing profile (choose a folder) of re - save profile.

  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_Manager

• Recently upgraded to the new version of Firefox and after a Windows system restore was performed today Firefox is therefore more accessible (by clicking on icon Firefox results in nothing) what can I do?

  After System Restore Mozilla Firefox icon is still on the screen but now when I click on the Firefox icon does not open. I have a number of bookmarks saved I'd perfer not to lose - is there anyway I can restore Firefox without losing bookmarks?

  Using the system restore can cause your installation of Firefox get corrupted because not all files are restored, so be careful to do a system restore.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• After that the Windows System Restore does not work

  So I tried at my peak of windows 7 on the eve, but he throws it gives me an error saying "can not find script file c\windows\run.vbs" system restore other than that it was just a black screen with my mouse on it. Any help would be appritiated, thank you.

  You are able to access safe mode?

  If your computer has a single operating system installed, press and hold the F8 key as your computer starts or restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If you access the safe mode, you can follow the procedure described in the following link to undo the restore point:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/undo-system-restore

• Will there be any problem of reactivation after the XP system restore?

  I just do a system restore (if out-of-the-box original factory of the machine) to a disk image.  After starting in Windows XP Pro SP2 I have entered configuration information initial requested as well as (as requested) Windows product key, but I jumped the (reactivation) activation step for now.  The motherboard has been replaced a year ago and I added RAM.  I all provided with the machine when you purchase including an OEM Windows XP SP2 "Recovery disc".  Will I have problems trying to activate/reactivate Windows or do I have to call Microsoft customer service to begin with.  Any advice or suggestions would be greatly appreciated.  Thank you!

  If the replacement motherboard was provided by Dell and Windows XP is as you mentioned a Dell OEM Dell recovery disk is required to provide support by Dell with Microsoft license agreement. If the computer is still in warranty, then support should be free.

  Activation should not be a problem as long as the product key belongs to the OEM recovery disk.

  J W Stuart: http://www.pagestart.com

• Windows vista cannot open network, the Task Manager and the windows system restore.

  I have problems with a computer, I'm trying to fix. It is a Dell Inspiron 1420 with windows vista. Whenever I try to open the networking or system restore, I get a window with a white screen. With this blank screen, it's like the computer is frozen, ctrl alt del, break the gel, but when I try to open the Task Manager, it would not come. Another problem is blocking down. Stop taking too long. (maybe 30 min)   I did research on the internet to find what could cause something like this and a way to solve these problems, but I came empty. Any information or suggestion would be useful.

  Hi Wiseman504,

  -How long have you had this problem?

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Step 1:

  Boot in safe mode with networking and see if the problem persists.

  See options (including safe mode) advanced boot for instructions on how to start in safe mode with network.

  Step 2: If the problem does not occur in safe mode, start your system in a State of clean boot (in normal mode) to solve the problem.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Optimize Windows Vista for better performance

  Ways to improve your computer's performance

  Method 2:

  Follow these steps:

  Step 1:

  Create a new user account and see if the problem is recurring in the account newly created.

  Step 2:

  If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.

  Follow the steps in the following article to repair the damaged user profile:

  Difficulty of a corrupted user profile

• Kaspersky sign appears after the full system restore

  After that I did a restore of the entire system on my computer, I have a sign indicating "kaspersky is not lit." What does that mean? This means that my computer came pre-installed with a free trial of kaspersky?

  Hello

  Computers are normally with a free trial of an Antivirus for many days.

  It is normally Norton or McAfee.

  You must configure the free trial. A system recovery reinstalls the operating system to exactly how you bought your computer.

  If the trial was initially, it will appear again after doing a restore to factory settings

  Consult the manual of your computer as to what had been bought...

  See you soon.

• I can't access "Device Manager" "MMC", "Run CMD as Administrator" and some .exe files after the Windows system crashed!

  I need help, please

  

  

  

  

  Hi Sirawut,

  I suggest that you perform an upgrade on site to solve the problem with the operating system. Contact the manufacturer of your computer / system administrator for the installation cd/dvd and refer to the article below for the upgrade on the spot.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  WARNING: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  http://support.Microsoft.com/kb/2255099

  Let us know if you need any other help.

• What is the difference between the standard system restore and to advance option IE. Windows and smart only restore to the recovery program? Two of them are my computer to factory settings? Which is better or less annoying?

  I use Window XP Home Edition.

  oureasyphamax,
  I do not know if I understand your question completely, but let me answer what I think that you have requested.

  The Windows System Restore will restore your Windows settings (drivers, registry, etc.) to a previous state (note it does not affect your user data).

  Smart restore or a system restore that is started before Windows starts, usually accessible from disk or a boot partition, an OEM recovery option.  It will usually restore your PC to factory without saving the data, depending on the OEM recovery options.  For assistance with this type of option recovery\restore, you will need to check with the manufacturer of PC.

  If this does not answer your question and then return. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it safe to delete Windows.old files after doing a system restore?

  I would like to know if it is safe to delete Windows.old files after doing a system restore. I did two restorations system in a year or two, and I have two files labeled "Windows.old" and "Windows.old.000" which are just take a lot of space on my computer. I heard that it is safe to remove them, but only if some files are copied correctly. How do you know if those files are copied on?

  Thank you!

  Hello

  It is safe to delete

  but get your data off it 1 if necessary

  you are the one who has to decide if you have recovered your data from the windows.old folder, until you remove

  Here's how to recover data from it

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  and here's how to remove

  http://www.Vistax64.com/tutorials/240390-Windows-old-folder-delete.html

• Insert the active windows system restore CD

  My laptop HP G7000 with the version of windows Vista Edition family gets empty with only a cursor arrow showing after trying to start.

  This problem occurred when I had a power failure when running the system recovery and was able to complete it. The system keeps asking for active windows system restore CDs

  I was able to assess the documents on the hard drive when connected to a system of work

  Can someone help me because I do not have the requested CD

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 system restore is impedes on the screen "system restore is initializing.

  Thanks for the response back...

  I was excited to your idea to check services and services to load... I didn't know about services of dependant' for the Volume Shadow Copy service and windows backup services... I check them and the services required and dependent services are all started and running...

  There is no error all messages when the system restore runs... it's just not always... (Even running overnight).    When I eventually give up and reboot the pc, I get an error message that the system restore did not complete...

  FYI... my device manager also shows as being very well... and I gave you on a previous message in the event log errors...

  Thank you for all this help and information... even if I have not fixed my problem, I've learned a lot about Windows 7...     :-)

  Bill

  I have a very similar problem with a Windows7 Ultimate x 64 system.

  Services run, my drive is ok, I have a lot of space (> 10 GB), I suffer from any other anomaly/Windows error, but the system restore will not end but freezes on the screen "system restore is initializing. The event log is not shine any light on this because the last event in the newspaper it is that the event log service was stopped, some hang up after the fact and did not get connected.
  Even system restore seems to work, there is a lot of activity of the disk for 5-10 minutes, then the disk activity stops and then the system just rest it seems doing nothing, rather than the SR. I have no problems to paralyze this system there may be something that simple.  Running in Mode safe is without help.
  I ran SFC/scannow in Windows (3 times in fact) but this does not help, either.

• Host Windows system restore back up virtual machines the VMWare Workstation?

  Is it save to perform a restore of the system on a Windows host running VMWare Workstation 9.0.2 with the premises of virtual machines? I just need confirmation that the VMs will be still functional after restoring the system.

  Welcome to the community,

  System Restore should not touch all personal documents, what configuration file and virtual disk are in reality. However, a restoration of the system can change the parameters of the application Windows for for example VMware Workstation. Anyway most that should happen is that you have to reinstall VMware Workstation in such a case.

  see "what files changed during a system restore?" at http://windows.microsoft.com/en-us/windows/system-restore-faq

  In any case, it is always useful to have a current backup!

  André

• I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore...

  Windows Vista 64-bit
  I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore. I'm now trying to restore my files however, I get an error message that says the missing user account... "files that you are restoring have security permissions to a user account that is not found on this computer. The missing account is shown below... Dad-PC\ADMIN."the problem is, that a user account name cannot contain the"------"what to do? Thanks in advance!

  Hello

  at the end of my 1st response is a link to the appropriate forum for these questions

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">