CC of Dreamweaver causes localhost wordpress display an empty page
I have updated wordpress in place using WAMP local server and it worked without problem. Win7 64 bit.
I just installed Dreamweaver CC and set up sites using tests Http://localsite/sitename for many 'normal' site I managed and which was fine, I could see them using live view.
I then added a local test site to see the site I've managed under wordpress and when I went to the live view, all I could see was a blank page.
I then closed dreamweaver and just opened my local aid wordpress site Http://localhost/WordPress and who showed too just a blank page.
I have no problem to get into my wordpress site through the local desktop but cannot view pages.
I searched the web and tried a lot of workarounds, but nothing has worked. in the end, I uninstalled worpress, removed from the wp database and reinstalled everything without problem.
Localhost worked with wrodpress again. However as soon as I tried to access the local wordpress site with dreamweaver the problem comes back.
It's very frustrating because you recreate a wordpress site is not as simple as copying just a load of HTML and PHP pages.
I have to add there is no errors shown.
Someone at - it ideas?
Hello Nancy,
Well, I solved the problem. As I mentioned it was strange there is no error message in the browser window, just a screen empty, so with Firefox I right click "view page source" that showed an unrecoverable error on the first lines of code in the header file. It was another mystery that this header file had worked for a long time without problem. In any case to eliminate I delete the offending code as it was only a part of the HTML code in place, but the error still persists with the same message. It was even more strange that I couldn't work where wordpress saw this code that I had deleted. This then led me to check the main index.php in the main wordpress folder which is normally just a few lines to define the theme and load the wordpress environment. This had somehow been corrupted and had been crushed by the index of my theme file and as such has caused the fatal error that all links are mistaken. This list was an error that does not display anything.
In any case have uninstalled all new and re-created the database via phpMyAdmin and then reinstalled and then configure the local testing server (check the main index of wordpress step-by-step file) I now have a wordpress site under dreamweaver work.
How the index file has become corrupted I have no idea, and I think that I will ever be.
Dave
Tags: Dreamweaver
Similar Questions
-
What are the causes my screen to instantly display several small pages?
What are the causes my screen to instantly display several small pages?
Your username appears to be rather ironic.
Given the richness of the information you provided, I guess, whatever the version of Pages that you use, you've opened the model selector.
Peter
-
Dreamweaver to change wordpress
Hello. I have an e-learning company and we use
a. html + css
b. php + mysql
virtual world flash incorporated of c.
We think to download a WORDPRESS theme and I'm a little worried about a few things:
a. y at - it no problem with the main help of a theme wordpress as my home page for info. Then I add a url hyperlink to my login.html which has nothing to do with the theme of wordpress, but is obviously on the same server of my host. It's not like there is a problem, but I have to doublecheck.
Thanks in advance
Oh, and Wordpress is not too difficult to install. Your host can do for you, but always upgrade to the latest version. If you get no joy it will be easy to find an online tutorial. It is not so difficult.
When you installed, check out some tips on safety. For example its always recommended to create a new account to use, and then remove the default admin user. There are others but you will: those you can manage through google.
Martin
-
Incorrect display of web pages
This is a problem not intentionally that comes and goes. I think it might be related to updates that are hunted. On my boxes linux (Xubuntu 12.04 with all the updates and patches), Firefox suddenly starts displaying all the pages as text only. I rebooted my machine without modification. I also uninstalled Firefox and all the configuration files and reinstalled without effect. The only add-on is shockwave 11.2.220. I disabled that and no luck. Does anyone know if there is another element of mystery to be uninstalled / reinstalled to get web pages to display normally? Are there additional measures beyond apt - get autoremove firefox that cleans up really really what is the cause? Any other suggestions?
Good job. For others with the same problem, please report
your last post as solved problem.Calculation of the happy.
-
URL address box does not display the current page.
With the 4.0.1 update, the URL address box does not display the current page.
All that shows is the text: «Go to web site»
To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".
Is there a way to display the url of the current page?
This problem may be caused by an extension that is not working properly.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
My dell laptop shows that it is connected but nothing of my browser opens, it displays the web page is unavailable pls help me to solve this problem
Hi shaikh_941,
1. what brand & model of network card?
2. were you able to use the wireless network connection before?
3. are you able to use the wired connection on your computer?
You can follow these links and check if it helps.
In the Windows wireless network connection problems
How to troubleshoot wireless network connections in Windows XP Service Pack 2
For Internet Explorer, you can follow this link & check if it helps.
How to troubleshoot possible causes of Internet connection problems in Windows XP
Hope the helps of information.
Please post back and we do know. -
HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page. I constantly get a message that the computer cannot communicate with the printer. Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.
I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.
Whenever I want to print, I have to restart the computer. After the reboot, I have a chance to print. This problem started on February 15, 2015.
My operating system is Windows 8.1. I have unintalled HP, rebooted, and then reinstalled the software software:
OJ8500_A910_1315 - 1.exe
HP Print and Scan - HPPSdr.exe doctor
HPSupportSolutionsFramework - 11.51.0049.msi
All versions were last uploaded on 4 April 2015.
I have a home wireless network (router Ubee DDW366). All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.
The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works. The card and 8.1 of Windows have been installed on January 3, 2015.
I have run virus scans and analyzes malware. Whenever they show that there are no problems with my desktop computer. What kind of desktop? Specially designed for my listing of... without brand computer parts store. ASUS motherboard P6X580 Premium. Now I will probably get hacked!
I'm at my wits end. And it's frustrating when I need to print something and the system hangs. I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed. It is also a time consuming.
This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.
Help?
Addendum: can I scan with the HP printer help. I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers. I have no problem with the sweep.
It has been awhile, but I played on something you wrote. "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work. So I would eliminate a program, reboot clean, try to print, and then reinstall the software. I finally found the culprit. I had a program running in the background, occasionally. When it ran, HP does not print. Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems... It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days! I can print with confidence.
-
Hi friends,
I create three field A textfield,textfield B,C textfield and apply the formula with dynamic action.
C = A + B.
Now, I want to protect user could not be total change at point C, so I change it is property of the text field to display only and change in
Settings-> save the Session State-> Yes
After all changes when I ran page and provide the registry then it shows me error below.
Session state protection violation: this can be caused by manually editing the protected page P67_C point. If you don't know what caused this error, contact the administrator of the application for assistance.
How to disable the total at point C when I use the dynamic action to calculate the Total of A + B.
Thank you.
Hi Maxence,
1. in the case of a display one element
Change your point of P67_C and change the State of Session Save-> No.
2. in the case of a text field
Change your point of P67_C and make it read-only
go to the attributes of the HTML Form element-> readonly = "readonly".
Hope this helps you,
Kind regards
Jitendra
-
<; af:panelSplitter >;, the second panel is not displayed on the page
I have a page by its name "Page1.jsff" which has a sign inside < af:panelSplitter >. The first Panel is displayed on the page when I deploy the application. The second round table is not displayed.
When I check the page in the browser using the Firebug, I see that the Panel is located on the page but not displayed.
Please let me know where I have to change in order to make the second panel displayed on the page.
NOTE: The "Page1.jsff" is a view in a taskflow activity and is added to a page as a region under the Toilet.
The "Page1.jsff" source code is as mentioned below
<? XML version = "1.0" encoding = "UTF - 8"? >
< jsp:root xmlns:jsp = "http://java.sun.com/JSP/Page" version = "2.1".
xmlns:af = "http://xmlns.oracle.com/adf/faces/rich".
xmlns:f = "http://java.sun.com/jsf/core" >
<!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_page1-->
< af:panelSplitter binding = "#{backingBeanScope.backing_page1.ps1}" id = "ps1" > "
< f: facet = 'first' name >
< af:panelGroupLayout binding = "#{backingBeanScope.backing_page1.pgl1} '"
ID = "pgl1" >
< af:outputText value = "Hello #{securityContext.userName}".
Binding = "#{backingBeanScope.backing_page1." OT1}.
ID = "ot1" / >
< af:commandButton text = "gotoPage2Button."
Binding = "#{backingBeanScope.backing_page1." CB1}.
ID = "cb1" action = "gotoPage2" / >
< af:commandButton text = "checkNameAndPage2."
Binding = "#{backingBeanScope.backing_page1." CB2}.
ID = "cb2" action = 'checkName' / >
< af:commandButton text = 'displayUserName.
Binding = "#{backingBeanScope.backing_page1." CB3}.
ID = "cb3" partialSubmit = "true".
action="#{backingBeanScope.backing_page1.setUserNameMethod}"/ >
< / af:panelGroupLayout >
< / f: facet >
< f: facet 'second' = name >
< af:panelGroupLayout
xmlns:af = "http://xmlns.oracle.com/adf/faces/rich".
Binding = "#{backingBeanScope.backing_page1.pgl2} '"
ID = "pgl2" layout = "scroll" >
< af:outputText value = "#{requestScope.customUserName} '"
Binding = "#{backingBeanScope.backing_page1." OT2}"id ="ot2 ".
partialTriggers = "cb3" / >
< af:outputText value = 'second group '.
Binding = "#{backingBeanScope.backing_page1." OT3}.
ID = "ot3" / >
< / af:panelGroupLayout >
< / f: facet >
< / af:panelSplitter >
< / jsp:root >It has a memory effect and impact the performance also.
And since it is not necessary for the auto bind components, why should I do?
See http://tompeez.wordpress.com/2011/08/28/remove-automatic-component-bindings/ for more information.Timo
-
by clicking on download free firefox internet explore announcement that cannot display the Web page
Firefox has stopped working on a single computer. When I click on the Firefox icon, it says "cannot find Mozilla runtime" has happened several times in the past and every time that I just did a free Firefox download it again and it fixed the problem, now when I try to make the free Firefox download internet explore says it cannot display this Web page. I tried to do a free download of Firefox on all three computers in my office and get the same message even on computers where Firefox works correctly.
Download the installer of Firefox on another PC of https://www.mozilla.org/en-US/firefox/all/ and transfer it to the problematic PC via a USB key?
-
Firefox does not display anything (empty tool bar etc.)
All Firefox to display just empty box. Neither the police nor the displayed icon.
I sent this with my other browser.
The problem just started after that I start my laptop as usual.On some systems, 33 of Firefox is incompatible with older graphics card/chipset drivers. This can lead to a fully black Firefox window.
The workaround is to disable Firefox to use hardware acceleration. More information: https://support.mozilla.org/questions/1025438
-
I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.
I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.
Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.
My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.
Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.
Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.
Any help would be appreciated. Thank you.
You can try a different theme of Windows?
Have you tried to start the computer using Windows safe?
Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.
-
On a page at random, Firefox briefly displays the start page by leaving the program.
When I am browsing a web site randomly and I click on the close button in the upper right, Firefox briefly displays my start page (google) before leaving.
Try disabling hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
-
My iPhone is locked. It displays the home page. I do not recognize my apple ID. What should do?
Have the original owner of the iPhone unlock iPhone, otherwise it will be useless to you.
-
Original title: page Web update always comes back also cannot display the Web page after that I click on express update.
Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d
Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014
Maybe you are looking for
-
Enter the password on BİOS
Hello have a good works, We write of Turkey and ı have computer laptop hp dv2000, ı have problem. my laptop from suite ask me 'Enter password' and ı do not know this password, ı try to reset the bios but ı don't... ı hope you can help me. I have 8 ch
-
I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom? original title: IPConfig and lack of internet access
-
I have a black down my clock square, when I click it, it opens to HP Support Assistant Model #: p6212f Product #: AV010AA-ABA Serial No.: [personal information] Software Build #: 94NAv6PrA3 Service ID #: 080-615 PCBRAND: Pavilion
-
How can I activate a wireless adapter on asus laptop
How can I activate a wireless adapter on asus laptop
-
Windows app 8.1 people is not update to Facebook more
Hello If I run the people (with a work of connecting to Facebook) app, it shows no more news of Facebook messages. The last message shown is Sunday... When I remove the connection with Facebook and reconnect, the last message indicated again is the s