CCC does not start. There are currently no parameters that can be configured using the CCC AMD

Similar Questions

• T7500 does not start - there are virtual offline or missing drives with preserved cache

  Dell 7500 PERC 6 / i controller, poweredge extended RAID with the device boot-SATA SSD and SATA RAID 1 data drives. A restart of an Acrobat patch system stops start after charges Poweredge and this error - ago offline or missing of the virtual drives with preserved cache, press a key to enter the configuration utility. In light of the not the choice I enter the configuration utility. Initially, the SSD has emerged as a foreign configuration but after several attempt to import the configuration, I decided clearly and followed an article on adding back as a RAID 0, but not initialize it, but that no longer works. Don't know if the drive is dead or what since I can't get out of BIOS. Always goes to the error. I guess I have to clear the preserved cache but do not want to lose the mirror. Posted the same problem yesterday, but he does not appear in the forum so I don't know if there is a filter or something. Need help - high-end system for FEA analysis and is necessary.

  Thanks in advance

  Figured it out. Dumped the cache on the controller and added back the lack of table, but it has not initialized. Change the boot device in the BIOS of the controller to the 'new' table; somehow the old VD1 became VD0 and re-added VD0 became VD1 and restarted. System came fine. No idea what caused it, but at least now it's back to work.

  Concerning

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC. If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC.

  If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  I webxite who has problems, and I get to him because I can't start Dreamweaver.

  Help! Help!

  If you bought it, you have the version under license.  You have not forever.

  Creative products of cloud is not the serial numbers.  You enable product Cloud by logging in with your Adobe ID and password.

  Nancy O.

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• Satellite P20 does not start - BIOS are not displayed

  I have a Satellite P20 and recently it does not start. When I press the power button that disk HARD will light up and it will check the cd-rom drive, but the screen is blank and will not display the bios screen. I can only turn it off by pressing the power button.

  Is it likely to be a hardware problem? I'll try to remove the RTC battery if possible to see if this resets the bios.

  Thank you

  Hello

  Maybe you have a problem with your battery from the Machine.
  Please make a new start without the battery.

  Go that wasn't you maybe has a possibility with a display of extern.

  I hope this is a help.

  By

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

  Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

  Moved from feedback

  Original title: WiFi

  Hello

  1. what version of Windows is installed on the computer?

  2. is it works much earlier?

  3 have there been recent changes made on the computer before the show?

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt.

  To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.

• Windows XP does not start even in safe mode. He just continues to repeat the start-up process unsucessfully.

  I had to force my computer last night.  Now the computer is turned on, I see Windows XP, then the computer passes the screen advising me the computer was closed and asks me if I want to start in safe, regular or the last usable parameter is known.  Unfortunately, they are all take back me to the same screen after a minute and the whole process starts again and again and again.  It does not start in same mode using F8 or F12.  Any advice?  Computer is an older laptop, but it worked great the day before.  I don't have add new programs.  I get the Toshiba screen and XP logo, but nothing beyond.

  Hello

  Perform a repair of Windows XP installation to fix the problem.

  For instructions, see the following article:

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

• Windows 7 does not start; Startup Repair won't work; Know last good configuration will not work

  Windows 7 64 bit machine. Automatic Windows updates were installed during the night; has started acting strangely this afternoon.  After an attempt to re-start, got the "Windows Error Recovery" screen with the "Windows did not start. A recent message HW or SW change might be the cause".  When I try to 'Launch Startup Repair' a screen returns but just hangs.  When I try to "Start Windows normally", it brings back me to the Windows error recovery screen.  When I hit f8 for when you start to get the screen "Advanced Boot Options" and try to go into secure Mode or use the last good known Configuration option, each one brings back me to the Windows error recovery screen.

  Any ideas on how to get this resolved?  Thank you!!!

  Hello

  The problem is since it will not run the startup from the Windows 7 disc repair you then you
  need some kind of support, and the cause is likely to be material. A Dell thing you want to do
  is to restore the system back to the factory plug 'IF' possible so it would be a good idea to save the
  data before calling their (possible an another 'IF'). Try to put the hard drive in another computer
  as the 2nd disc (best method) or in an external case USB (less likely to work) and then copy
  data on removable media such as CD, DVD or other external USB drives.

  Good idea to check with the technical support Dell, their online documentation and the Dell forums where he
  perhaps others with the same problem.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Other choices would be a real store of the computer performing the internal repairs (not the leeks and the glances at one
  Best Buy or other stores). Of course if she has any warranty Dell is the best choice, and
  can be in effect regardless of any warranty.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my user profile does not load correctly. My system logged me in my computer using the temporary profile

  original title: user profile

  . When in safe mode, I see all my apps, but in normal mode, it does not load properly.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 search service does not start. Error references 2147218061. How can I get this service began so my OneNote notebooks are available?

  I am unable to get windows search to start from the Administration Panel.  The error box refers to error code 2147218061.  I want to get this started so I can take advantage of OneNote search functions.

  Troubleshooting Windows 7 & Vista search & indexing errors
  http://www.WinVistaClub.com/T24.html

  You could look at reset or rebuild the search Index.

  How to use Indexing Options in Vista (and probably Win 7)
  http://www.Vistax64.com/tutorials/69581-indexing-options.html

  Try the system restore and the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Are there problems with other Services that may be running or from?

• PROTECTED M100 does not start on an internal CD, even though it is set in the BIOS

  Well, I have a Toshiba protégé m100 here I think.

  I set the boot priority in the BIOS such as CD-ROM > LAN > FDD > HDD

  I restart, does not work. Starts directly in HD and loads the operating system.

  I also tried pressing ESC or else bring up the start menu pop up.
  I'm sailing on the 1 that looks like a single disk CD. I hit enter on that, and it always starts in HD.

  The CD rom works. The current operating system is Ubuntu. I can go into Ubuntu and watch the windows XP CD...

  But it won't let boot me from any cd, it doesn't even look like she is trying to find one. Does not sound or rattling noise.

  (and for the record, I'll since Ubuntu XP to work, non-identifying preferably lol).

  Edit: Oh yes, I had to disable the LAN network card in the bios because the boot priority would ignore the cd again in any case and find the lan connection or something... So with him off, Yes, it jumps to the LAN too now, to boot from HD.

  Post edited by: chriswf

  In my opinion in the BIOS, set HDD as first boot device.

  For some reason if you need to use the other device as first boot device you can choose it manually in the start menu when you use F12 at startup.

• Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

  I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

  I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

  I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

  On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

  I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

  Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">