CD does not-security settings?

Similar Questions

• WMP11 & sharing media w / Xbox 360 - does not display settings ' share my media to.

  Recently, I tried to connect my Xbox 360 to my laptop PC running Windows XP SP3. All the official how - in fact seem as easy as going to WMP 11, then the 360 was on and connected to the network and will 'Media Sharing' and check the box, "share my media". However, while they were inspecting the area, nothing happens, no detail windows open upwards. All are two buttons, OK and CANCEL. I click OK, all gray outside for a while as the settings are applied, then it returns to the same window sharing media files, no new options, no new parameters. Like nothing happened.

  And indeed, nothing has changed.

  Gentlemen, what do I do?

  AGVKrioni,

  Sorry to hear about your difficulties.  No fun!  If the Xbox 360 don't watch not appear inside WMP 11 as a shared device, then it is possible that WMP 11 does not see the Xbox.

  1. the xbox is completely up to date via xbox live?

  2. it can also be caused when the Xbox and computer are actually on 2 different networks (despite being connected in the same building).  Connect the computer or Xbox Wireless?  To check that they are in fact on the same network, obtain the IP address of your Xbox.
  -Go to system settings network settings.  Note the IP address.
  -Go to your computer.  See if you can test your XBOX (see on the network).  Open the prompt (start, run, "cmd").  Type "ping ipaddresshere ".  Do you have an answer?

  3. check that you have all the latest Windows updates (there may be other updates/patches for network management issues)

  4 turn off your Windows Firewall

  I hope that these 4 ideas help or someone much more intelligent that I add ideas, because there is nothing else I can offer.  I hope that helps!  Good luck.

• 6.52 update does not remember settings VMNet

  Host of Vista X 64.

  Updated 6.51 to 6.52

  VmNet0 parameters (such as described in the virtual network editor) do not survive a reboot, Hibernate or sleep of the host.

  I put VMNet0 to bridge to an internal wireless card.

  Also, the automatic bypass is disabled (However, if I check it out and add maps to the list 'does not automatically bridge', they are not recall.)

  Somehow, this seems also to be a security problem (it should not fill in a network, I don't want to, even if it does not fill what be it after a reboot, the setting into hibernation or sleep).

  I guess I'm probably no chance for a solution, so I think I may have need to code to the top a sort of registryor of other hack that gets running whenever the host boots or returns from a hibernation, or perhaps the values are simply not get registered first. No idea where to start?

  This totally blows the water of the basin.

  Joe

  If you want to manually do the hard look in;

  \VMnetLib HKLM\SOFTWARE\VMware, Inc."

  HKLM\SYSTEM\CurrentControlSet\Services\NetBT ".

  HKLM\System\CurrentControlSet\Services\Tcpip\Parameters.

  HKLM\System\CurrentControlSet\Services\VMnetBridge ".

  Joakim

• Upgrade to 3.0 asking does not migrate settings from the previous version

  I have two jobs, I'm running and I have SQL Developer 3.0 upwards a race and has been invited to capture my preferences from my previous installation to the new version. Connections and reports have all migrated to this version. The other workstation, I did the same thing and when I tried to run SQL Developer tried to run first using the sqldeveloperW.exe and it hung and would not do anything and I had to reboot my box to use it more. I was able to run sql developer on this box since then however it does not ask me to migrate my settings from my previous installation. How can I do this?
  
  I tried to extract files in the directory running of deletion, I tried to find the registry settings (impossible to locate any for developer sql pertaining to the management of versions), I downloaded the new version again and extracted. Any help on this would be appreciated!
  
  Thanks, Ron

  You can delete all the SQL Developer\systemXXX folder under the (hidden) of your Windows user profile Application data. This will reset all default settings and ask for the migration.

  Have fun
  K.

• Why is my firefox does not remember settings for bar add-on, spaces, etc.?

  I put a few extensions for display in the bar of addons, but every time I put a few spaces and relocate, gets it more fuzzy space more and remembers him like that.
  After defining the spaces, on every restart, it automatically grants them in his own way?

  It happens only with me? Help, please?

  Maybe this is caused by another extension that does not work properly.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Alternatively, you can check for problems with the file localstore.rdf.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• DEVELOPMENT module does not all settings more.

  My DEVELOPMENT module shows not all settings: none balance white, exposure, clarity, etc. From the histogram, it climbs to the tone curve. I have a MacBook Pro late 2013 and the latest versions of OS and Lightroom. Help, please! Thank you.

  Press Cmd/1.

• Exported video does not match settings

  Hi all: (this announcement here and in the forum of the Organization)

  I exported a Premiere Pro sequence to make/code in the SOUL (images is AVCD 1440 x 1080 29.97).  I'll upload the video on YouTube.

  To export settings, I chose H.264.  Then under the preset, I chose the YouTube HD 1080 p 29.97.  The default to 1, 920 x 1080, so I clicked on "match source" - which changed the video settings to 1440 x 1080 - and everything is left him alone.  I then in waiting - and open SOUL.  When he made encoding, the emitted video in 1920 x 1080.

  Here are a few screenshots:

  

  

  What I am doing wrong?

  Any help is greatly appreciated!

  Thank you

  Kim

  1440 pictures is exactly the same sizeas HD 1080 (1920 x 1080), but with different pixel format. IE not square

  The preset of YT is not scaling it at all. Just messing around with NORMAL without deterioration of quality at all.

• Screen saver does not account settings in Windows Media Player when you watch a movie...

  Hello

  Does anyone know how to solve the problem with the screensaver kick watching a movie using Windows Media Player (WMP), even though I unchecked the option to "allow the screensaver during playback" in WMP?

  I found that if I start Windows Media Center (WMC) first and watching TV for example or even listen to music in WMC and then then quit, then load WMP to watch an AVI, after the specified time, the screen saver starts, and the film is no longer visible until I move the mouse to stop the screen saver.  I know not if I reboot WMP works perfectly and no screensaver will start, which is not so much that I restart WMC, then switch back to WMP...

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  Ah yes, guess what, in Windows 7, this problem is solved!

• Firefox does not account settings to open the home page to start and open rather the previous tabs

  Opening of Firefox, the browser displays my previous session, despite my selection 'display the homepage' or 'show white screen' on the opening.

  You can check if you have a user.js file in the Firefox profile folder (a detailed list of the system shows that you have) which defines the pref browser.sessionstore.resume_session_once to true.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  (I noticed that the mozillaZine knowledge base is down at the time of this posting)

  The user.js file will be present if you or a other software created this file and normally will not present.
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • https://support.Mozilla.org/KB/profiles

  Windows hides certain default file extensions.
  Among them .html and .ini and .js and .txt, and you can see only a file name without file extension.
  You can check the file extension (type) in the file properties in Windows Explorer via the context menu.

• Satellite P50 - Windows does not remember settings screen gama

  Hello.

  I just bought a Satellite P50 and I'm a little disappointed by the screen.
  It looks a little cloudy/Sun for me.

  I get a slightly better result by changing the gamma settings of Windows screen.
  But whenever I have to close the cover or close the session, the screen is back for the parameter by default when I turn on again.

  Is there a way I can make my phone remember my favorite screen settings?

  Can you please describe exactly what you did? I want to test it on my new machine of Win8.

• HP Officejet 7610 Wide Format e-all-in-one does not copy settings B4 paper size option.

  I want to copy documents B4, but there only automatic, A4, 4 x 6, 5 x 7 inch, 8 x 10 inch, ledger and A3 paper size. How can I configure to B4 or another paper size? or it will automatically select the paper size according to the documents when I choose the automatic paper size?

  So far there is no attempt to HP to fix this, not even an update for any improvement. However, I have something to activate the copy B4. I notice that the printer has check the size of the paper by detecting the right edge of the paper. So, the trick is:
  1 adjusts the A3 size paper tray
  2. the B4 paper near the right side of the status bar of the places
  3 place some items including the flat surface to the left space to control the paper jam avoiding paper movement.

• Metadata recording does not develop settings.

  OK, so here is the scenario, when I scan in my negatives of my Epson Perfection v330 that I put it up so that they export in a folder called 'Scans' then when I open Lightroom it automatically products are imported and records them in a folder named "test post".

  The other day, that everything was fine, I could crop, change the exposure, change of color, all then its CMD + S and what I had done would be save and modified in the folder "Analysis post", no export or anything, just nice, simple and fast.

  Today, that I've scanned an old photo, same procedure, culture, exhibition and CMD + S except it wouldn't change anything in the folder "Analysis post" as it normally would be. I initially thought it may have been because she was not a negative scan, so I modified a negative, I got there and... nothing.

  I'm puzzled as to what it is, can anyone of you help, there is nothing to really, just easier, faster and requires less disk space is all.

  Thanks in advance.

  haaanson wrote:

  I know this will sound weird, but if I clicked on CMD + S then it modifies the file without exporting, as is it exported it and write too much.

  It seems strange, but I'm several he did this.

  It's not what it is supposed to do, then perhaps, she felt guilty and changed his mind!

  How view you files when you saw the changes in Lightroom without export?

  I don't know of any application other than Lightroom and Adobe Camera Raw reading changes to Lightroom.  You open the files edited in Photoshop?  If so, whether you do it via ACR (set the Edit menu, preferences, Camera Raw and Tiff handling inside the TIFF format: "automatically open all supported TIFFS") then you will see the changes when you open the file in Photoshop, that it will go through ACR.  If you set this option to "Turn off TIFF support" then even Photoshop will not see the changes in Lightroom.  I just tried, and it is the behavior of my (CS5).

  PS - you don't mention what file format you use.  What I said about tif also applies to the jpeg format.  With raw you don't get the choice - you use ACR, if you want to open them in Photoshop.  Any format, see ACR edits of Lightroom, Photoshop is not, nor is (to my knowledge) of any other application.

• Apple Watch does not appear in the security/privacy settings my mac (2015)

  Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto

  Hi abcd_bruce,

  Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.

  Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.

  Try safe mode if your Mac does not end commissioning

  Have a good night!

• My computer somehow security settings changed and it does not allow me to fix it

  Original title: my security

  My computer somehow security settings changed and it does not allow me to fix I am getting very frustrated, I can't update anything, and he told me that the security settings allows that which can I please help

  Please see the link below.

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-message-your-current-security-settings-do/59cc236d-7baf-4552-92ff-b34b9a6942aa

• Page rotation script does not (not allowed error security settings prevent access to this property)

  Hello

  I use a script to rotate each pages in pdf format by clicking on a button. I added a script to rotate the file in the click event of the button turn as a javascript. It works in acrobat, but not in adobe reader. Please see the script

  Start = 0;

  nEnd = this.numPages - 1;

  nRotate = 90;
  Try
  {
  If (this.numPages > 0)
  {
  this.setPageRotations (start, nEnd, nRotate)
  }
  }
  catch (e)
  {
  App.Alert ("processing error:" + e)
  }

  But I get this error in adobe reader not in acrobat. "not authorized error security settings prevent access to this property or method". What is the problem. Please someone tell me.

  OK, so here's what you do:

  -Create a new file in a plain-text editor (I recommend Notepad ++) and paste this code:

  safeExecMenuItem = {app.trustPropagatorFunction (function (code)}

  app.beginPriv ();

  app.execMenuItem (code);

  app.endPriv ();

  });

  mySafeExecMenuItem = {app.trustedFunction (function (code)}

  app.beginPriv ();

  safeExecMenuItem (code);

  app.endPriv ();

  });

  Close the player if it was open and then save this file as "MyScripts.js" and place it in the following directory (this is for Windows):

  C:\Program Files (x 86) \Adobe\Reader 11.0\Reader\Javascripts

  If you want it to run as well in format Acrobat place the file also less:

  C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\Javascripts

  Now to rotate the page clockwise attach this code to your button (in Acrobat, of course):

  mySafeExecMenuItem ("RotateCW");

  And to turn them counterclockwise, use this code:

  mySafeExecMenuItem ("RotateCCW");

  Open your file in the player and the buttons should turn pages when you click on it...