CD drive is not detected

Similar Questions

• Re: Tecra 9100 - new HARD drive is not detected

  I have a Toshiba Harddisk provide a Tecra 9100. Checking the BIOS it shows "Enhanced IDE", but you are trying to boot from the disc does not work HARD. Even trying to install a new operating system present, that the HARD drive is not detected.
  From the laptop is also very long.
  Any idea?

  Your new HARD drive is larger than 120 GB? The HARD disk controller supports the 28-bit LBA and large drives as 120 GB will not be recognized by the BIOS.

  What you mean with Enhanced IDE? The BIOS recognizes the new HARD drive with model number?

• HARD drive is not detected in BIOS - need to recover data.

  What happened is that my laptolaptop takes a long time to start, so I slapped him. After that I kept getting the error message "no boot device, please restart". So whenever I restarted I kept getting this message. I also sometimes had "Media Fail" message. I pressed F2 at startup to get into the Bios. Settings so check I saw that hard disk still showed it's a Hitachi one.

  My hard drive was clicking to it so I searched online advice on what to do and I saw on the opening of the hard drive in a clean environment, ensuring that no dust went on the drive. I expect the head being stuck on disc, but it was not stuck. So basically, I put the lid on. Since then, the hard drive was not detected.

  Not in the Bios (he said no). I bought a CD to restart which can temporarily become Windows to the screen under Xp, so I can go to the computer to retrieve data from the hard drive. It shows nothing. There is always a clicking hard drive, more a ticking sound. It is always possible that an expert could remove the hard drive and recover my data that are valuable photos and videos.

  Thank you

  What model of laptop do you have?
  Try to set the BIOS to default settings and check if the HARD drive is recognized correctly.

• Equium A200 - CD/DVD drive is not detected

  I can't open any CD/DVD disc. The drive is not detected.
  When checked in the management system, he demonstrated, the drivers are missing or corrupted.

  How do I download the drivers? Or is there another solution?
  My model number is PSAF5E
  Serial number is YT144538Q
  And the CD/DVD device is POLE * DVD / RAM UJ-850 s ATA device

  Hello!

  T, you can download or reinstall the CD/DVD driver because it s a part of the OS (operating system).

  It would be interesting if the BIOS can detect the drive. Please check this box.

  It would also be interesting if you have an error as the #19 error message. This is known and a search around the forum.

  Good bye

• My cd/dvd drive is not detected.

  CDDVD DRIVE IS NOT DETECTED

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32).

  Driver name: TSTTCORP CDDVDW TS-L633F

  Depending on the operating system, try following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Second hard drive is not detected

  Hi, I bought an ssd to replace the hard drive of my acer e5 571g 50ns.
  Using a desktop computer, I transfer the os and oem SSD partiton.
  Because the laptop have a fake cd/dvd player I bought an adapter 2.5 ".
  So, I put the ssd sata port where before there was the hard drive and put the hard drive into the adapter port sata cd/dvd.
  When turning on pc the ssd is detected and it works perfectly, but the old hard drive is not detected. He is not shown in Device Manager

  As the garancy struck down, using my campus license, I installed windows 10 removal of the oem partitions.

  Now my acer works perfectly with ssd and hdd.

• My cd Tower driver does not detect a particular cd alone... it detects all the other CD

  Hello my laptop driver has not detected a particular cd alone... it detects all other CD... How to get rid of this problem

  You probably can't fix it.  It's probably a damaged CD unreadable.

• HP v125w 2 GB drive flash not detected by windows

  My flash drive is not detected by windows what should I do

  I have a HP v125w 4 GB flash drive that works on Windows 2000 and 7.  However, I also have a disk 16 GB flash of v125w HP which works on Windows 7, but was not recognized by my system Windows 2000.  Here's what I did to get Windows 2000 to recognize (this may not work for everyone, but it did for me).

  I plugged the flash drive to 16 GB on a Windows 2000-based USB port and ran:

  Norton SystemWorks-> Norton Utilities-> find and correct problems->

  Norton Disk Doctor-> diagnosis

  that gave me the message:

  Insert the diskette to diagnose in the E: drive.

  So, I ejected the flash player, it plugged into the USB port and you click on diagnose again.

  Norton Disk Doctor consulted the flash drive, diagnosed and gave the following report:

  There is no problem detected on drive E:
  Partition table... Jump
  Structures of files... Ok
  Surface test... Jump

  After this, the flash player was working fine on my Windows 2000 and Windows 7 computers.

  Thus, this procedure is awakened somehow the reader as much as to be recognizable by Windows 2000.  I hope this helps you.

  Bob.

• CD drive does not detect in the EXSI vm servers

  Dear friends,
  We installed the server as virtual machine in the platform EXSI, CD player, but the server is not displayed. I tried almost all the options.
  Please help in this problem.

  The w player server is connecedt as a 'Customer' device and have "connected to power on" checked.

  We already install two server in this Exsi machine. Now when I created another virtual machine, CD does not work. And I checked also other server that also the CD does not work.

  If any server in this platform the CD drive does not detect. I think that some options in the EXSI platform that must change.

  Welcome to the community,

  the reason why physical disk is not detected could be a problem with the configuration server hardware, firmware on the CD-ROM drive...

  The easiest way to work around this problem is to use the ISO images and upload them to a new folder on a data store (for example ' ISO-Repository') using the browser of data store and then mount the ISO on the virtual CD drive. This installation of tracks also run a lot faster.

  André

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• P30: External hard drive is not detected when you use IEEE 1394 cable

  My P30 not / can not detect my newly acquired Western informed extreme Digitak Drive 320 when I connect via the firewire port. I use a 4-pin cable (which costs a fortune, by the way) who is supposed to be a way to connect this drive to a 6-pin pc.

  My ieee 1394 driver seems to be called 'VIA OHCI Compliant IEEE 1394 host controller".

  Can someone tell me what to do? I really need to connect the FireWire drive because I need the USBs for other devices.

  Thank you!

  Hi, Lars

  It is really strange. I use the external DVD drive (DL) using the same cable. I tested it with several units (old Satellite 1900, Tecra M1 and also new Qosmio G20) and everything works perfectly.

  Check the power supply to the external HARD drive.

• Flash drive is not detected

  Original title: Flash drive problem

  I got my player wiped clean flash caused by a virus. Now, when I insert the disc nothing happens. I am not very informed when it comes to these things, but I thought that my data would be entered on the drive again, just like the first time around. Made null and void by car when I had the deleted info?

  I have a laptop Compaq Presario with Windows Vista Premium. Also, I just had the motherboard replaced, but I don't think it would have something to do with it. I appreciate your help!

  Thank you
  Elda

  Hi Elda,

  Thanks for posting the question in the Microsoft Community!

  The USB is not detected.

  1 have you tried in different ports?

  2 are you able to use other devices USB?

  I suggest you follow the steps:

  Method 1: Run the fixit

   

  See the site:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Then, as all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the steps:

   

  a. click Startand then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click on to expand Bus USB controllers, right click on the controller host, click on uninstall and click OK.

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. repeat the substep c to uninstall all items under Bus USB controllers.

  Now, restart the computer, and all USB controllers will be installed automatically.

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• CD/DVD drive is not detected, the disc is missing or disconnected

  Well I have not tried to play anything or anything either burning on my laptop in a while and all of a sudden is not working more I followed suggestions on the microsoft site, but when I went into Device Manager to check on my drive anywhere it lists same CD-ROM/dvd-rom I'm so confused, I don't know what I tried to use microsoft not fixed and it's just as stuck as I am all he tells me it is than its disconnected or missing and cannot be found.

  Oh and while I'm asking questions my sound stopped working a few months back the small volume in the lower right corner icon has an 'x' next to him now and he says: no audio output device is installed, I tried following the suggestions online for this with no luck either. I hope that its not anything internal since I just had the motherboard replaced by a few months before this happened

  Thank you very much I hope you can help!

  Hello

  Well it still might be hardware or wiring.

  Restart to make sure that nothing is inteferring with the process.

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD drive is not detected.

  For some reason my CD/DVD drive is more functional.  I can't even eject the disc that is in it and it does not recognize.  I have searched for corrections and so far all I've done was to remove the filter lower and upper filters in the registry.  I'll try to uninstall and reinstall this drive, but I can't even find on device manager

  Any help would be appreciated... Thank you!

  Here is the solution I mentioned earlier. Good luck and thank you Greg!

  I thought I had posted the solution.  The upper and lower filters need to be refreshed.  Here is a solution I found on the Adobe forums. http://kb2.Adobe.com/CPS/402/kb402306.html

  Refresh the CD and DVD drivers list in the Windows registry.

  Warning: The registry contains information on the system that are critical to your computer and applications. Before editing the registry, be sure to make a backup of it. Adobe does not provide support for problems that result from incorrectly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For more information on the Windows Registry Editor, see the Windows documentation or contact Microsoft Technical Support.

  To refresh the CD and DVD drivers list in the Windows registry:

  Important: After you refresh the list of drivers in the Windows registry, you may need to reinstall any other CD or DVD on your computer to write applications. If you restart Windows after this procedure and other burning CD or DVD applications do not recognize the CD or DVD drive, and then reinstall those applications.

  1. Uninstall your Adobe application.
  2. Open the Registry Editor:
     • On Windows 2000 and XP: click Start > run. Type regedit in the box text open, and then click OK.
     • On Windows Vista: Click Start. Type regedit in the search text box, and then press ENTER.
  3. In the left pane of the registry editor, navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class and select the {4D36E965-E325-11CE-BFC1-08002BE10318} key, which appears as a folder.
  4. Select file > export (Windows XP and Vista) or registry > export a file from the registry (Windows 2000).
  5. In the export registry file dialog box, select the branch selected under export range, name the file (for example, CDDVDkey.reg) and click Save to save the file to the desktop.
  6. In the Panel to the right of the registry editor, select the LowerFilters line, and then choose the editing command > delete. Click Yes in the dialog box confirm deleting key.
  7. Select the UpperFilters line, and then choose the editing command > delete. Click Yes in the dialog box confirm deleting key.
  8. Close the registry editor.
  9. Open the Device Manager:
     • On Windows 2000 and XP: click Start > Control Panel. Double-click the system icon, click the Hardware tab, and then click Device Manager.
     • On Windows Vista: Click Start > Control Panel, double-click System, and then click Device Manager in the task pane.
  10. Click on the symbol more then to CD-ROM/DVD-ROM drives.
  11. For each listed DVD-ROM or CD-ROM drive, select the icon then choose Action > uninstall.
  12. Restart Windows.
  13. Windows will automatically detect and reinstall your CD-ROM or DVD - ROM drives. You can check that the drives are installed in the device (see step 9) Manager. If the drives are not present, open Device Manager and choose Actions > Scan for hardware changes.
  14. Reinstall your Adobe application.
  15. Restart Windows.

  Important: If this solution doesn't solve the problem with the application you reinstalled, then you must restore the CD and DVD drivers list in the Windows registry.

  To restore the exported CD and DVD drivers list:

  1. Double-click the registry key that you exported.
  2. Close the registry editor.

  3. Restart Windows.

  • Proposed as answer byGreg good and Cool Sunday, May 16, 2010 11:38

• CD/DVD drive is not detected (Windows Vista). Error message: Please insert a disk (removable disk): __Our device driver is: TSSTcorp CD/DVGW TS-H653L ATA Device.

  Was not aware there is a problem until I tried some recently audio and data CDs.  Have you tried different Web sites to help you, however some of the directions come with a warning that by following certain procedures I can create other problems.  The FixIt tool was not able to install the player.

  Hello

  Please ALL these even if you've done it before as it's often the total process that
  solves the problem. You should also check with the system manufacturer as some readers do not use windows
  by default the drivers and need their own, use the bottom and if no joy check on the site of the manufacturer of the system.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD Rom drive - disk not detected when you try to play a movie or a cd.

  I tried everything in the book according to what the technical support guy me to HP.  Gave me a new optical drive.  I made the purchase and asked the guy.  How do I get the driver if it does not appear in my device manager?  He said just to install the new optical drive, and it will download automatically.  Yes, it was the most ridiculous thing.  He did his best to convince me.  Now, I received the new optical drive and even absurdity.  It won't work.  Try to get assistance and spend hours on the phone with them and no one can help me.  Wow.  Scam, scam, I don't really know what to call it.

  Hello

  Maybe it wasn't the drive first:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.