CD/dvd opens and closes and towers cd/DVD but unable to read the disc and is not recognized by pc
No icon in my computer and the drivers does not work
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
HP probook 4520 CDDVDW not reading DVDs but it is reading the cd
My CDDVDW not reading DVDs but it is reading the cd, when I check in the management of the computer-> properties of the drivers-> details-> driver description shows me the cd rom value why?
Hi, Munirazammuhammad,
Try the solution given here
-
Spinner of freeze/hang up system rotates forever, whenever many tabs are open and did not reset for awhile
can you diagnose the problem?
can we do nothing at other times then turns off the system, thereby losing any unsaved files, lose the last session...?
Right-click on the taskbar where there is no icons. Choose Start the Task Manager. On the Applications tab. You can selectively close what ever is open in this window. Select the item, click end task.
Firm enough of them that you are able to take control.
If you cannot start the Task Manager, you may be stuck. This leads to a bad alternative that risk. Close the hard way. To do this, hold IT in until the machine stops. Of course you will lose everything you have not saved.
After that, adopt better habits and close more often. Do not open too many tabs. You are limited by the amount of memory installed.
-
I inserted a DVD into my Dell studio xps and it won't read the disc or allow me to eject. Suggestions?
Check your computer manual or support web site to find the emergency disk eject function and use. So do not put the drive back. :-)
-
Original title: no dvd
I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer
Hi Lesliestones,
· Did you do any change on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Method 2: You can run the fixit and check if it works.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
I hope this helps.
-
Cannot read the disc for dragon 11, but will read and download dragon 9
I can install version 9 of Dragon, but when I tried to upgrade to Dragon 11, it wouldn't read the disc of Dragon 11.
I checked the disk on my laptop, and read 11 Dragon, she could not install the software for cause of memory.
Hello
· Another CD/DVD is getting recognized on the computer?
Here are a few options you can try:
1. you can download Dragon 11 on the manufacturer's Web site and try to upgrade.
Link for reference: http://shop.nuance.com/store/nuanceus/DisplayHomePage?resid=Tj5UDQoBAlYAAAT0MkUAAAAD&rests=1312707596649
2. install the application of the dish:
a. Insert the Setup on the laptop disk.
b. start Windows Explorer.
(c) in Windows Explorer, click to select the drive for the installation disc.
d. in the Edit menu, click Select all.
e. in the Edit menu, click on copy.
f. and paste it into an external USB drive or a USB flash drive.
g. plug in the drive to the computer where you want to install Dragon 11
h. on the file menu, point to new, click folder, type Setup 11 Dragon, and then press ENTER.
i. double-click the folder and then click on paste on the Edit menu.
j. double-click Setup.exe, and then follow the instructions that appear.
You can also access: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641
-
Used the update and now the video card is not recognized
I updated updater manual update and have not updated anything since early December, 01/30/10 I installed the 5 important updates that were listed, I don't remember who they were, after installing the computer needed to restart and after the recovery, the video card is no longer recognized. I get the BIOS beep code for no video card or bad video memory. I know that this seems to be a hardware problem, but this computer worked fine until these updates. Now that the video card is not recognized, I can't even get into the BIOS, and still less actually starting windows. Any help/ideas what caused this and how can I fix this are greatly appreciated, thank you very much. Even a list of the latest important updates might be useful, I can't seem to find a list of anywhere.
System-Vista Home Premium 64-bit
Palit-card nVidia GeForce 9600 GT graphics cardOh and I took out that graphic card and put in a different one, nVidia PNY GeForce 7900 GS and always get the same error code. I also disconnected and removed the battery from the motherboard to reset the BIOS, still the same problem.
Hi JohnyDick,
This problem seems to be due to the updates of Windows, although it could be a coincidence.
I first you recommend to remove the nVIDIA graphic card and connect the monitor to the onboard graphics card, then try to start the computer.
If the problem persists then I recommend you to contact the computer manufacturer for assistance.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Unable to read the work recorded, timeline is black and shortcuts
Unable to read the work recorded.
I started doing a few words with a song. It was not full yet so I recorded it. After a while, I returned to continue, but the timeline would not play. The video section containing the words of the timeline was black and shortened. I waited until the next day and it still the same. I tried to re-do and its not black or shortened, but the timeline would not play with or without music. Please I need help with this!
Hello
1. what application you're using to play the video?
2. you receive an error message when you try to play the video?
You can try to recreate and save the film.
Reference:
Demo: Create a slide show with music in Windows Movie Maker
Create movie customized for Windows Movie Maker settings
To save a movie in Windows Movie Maker, click the link below.
Publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
-
TEAC sx-60 mouse and keyboard not recognized on my laptop but on my computer, it works fine
TEAC sx-60 mouse and keyboard not recognized on my laptop but on my computer, it works fine
It is the responsibility of the manufacturer to provide drivers. If they are not, you will not be able to get from Microsoft.
-
I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".
Interestingly, if I copy and paste your images into a new doc 2 points scored.
I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.
-
I use a mac and when I try to save a file I get this message. Unable to save the image. Do not have enough access privileges. -5000
local disk, I think he was trying to save it in the templates folder. I changed it to save it on my counter top and it worked. Rookie mistake. This had to be the problem.
Thank you
-
I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I have an intel i3 proccessor, windows 7, internet Explorer.
All processors Intel i3 having at least 2 hearts, your specifications far exceed the requirements; See http://ark.intel.com/products/family/75025#@All
I have some computers with much slower processors, and Flash Player 14 works perfectly well on them also.
-
Hi there, I need to be able to read the raw files on an Olympus Stylus 1 via CS5 and Lightroom 4. I downloaded Raw plugin v 6.7.1 file but still cannot read the files?
Read this http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html table
The Olympus Stylus 1 was first supported Camera 8.3 crude which is compatible with the CS6 and CC.
It is not compatible with CS5 or more and never will be.
If you do not upgrade to CS6 or CC, then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNG, and then edit the DNG in CS5.
-
Not possible to burn a DVD-tells me that it cannot read the disc
What do I need to get windows or any other media player to burn a dvd movie cause that he told me that it can not read the disc. If someone can tell me what I please
The only version of XP that included the possibility of creating a
DVD-video is Windows XP Media Center Edition 2005.
What has been consulted through Windows Movie Maker and
was not shown to be extremely reliable.Beyond that... you need DVD Authoring software. The
following freeware is an example:(FWIW) It's always a good idea to create a system
Restore point before installing software or updates)DVD Flick
http://www.dvdflick.NET/Download.php
(the download is: "dvdflick_setup_1.3.0.7.exe")Save the file to a folder on your hard drive and
install from there.Be sure to read the Guide:
http://www.dvdflick.NET/Guide.phpTutorials:
Tutorial DVD Flick
http://beginwithsoftware.com/videoguides/DVD-flick-Guide.htmlBurn any Format video DVD PC
http://www.freevideoworkshop.com/dvdflicktutorial.htmTo create a video DVD base that should play in a free
permanent drive DVD... try the following...First... read the DVD Flick Guide to familiarize
with the program.Open DVD Flick and insert a blank DVD in your drive.
If the window of Autorun from your computer... just close it.
Click the project settings button and check... Video /.
Target format... residents United States... Choose... NTSC /.
Accept.The title button left click Add and navigate to your
Video clips and select the ones you want on the DVD.You can have by selecting one and then use
the up and down buttons.Left click on the button create DVD / OK / Yes / Yes.
Please wait while the DVD is created.
When the text "Completed successfully" is displayed you
DVD Flick can close. Now you can eject your DVD
and play in your DVD player.At some point you might want to buy more
Advanced Cyberlink, Nero, Roxio, software
Ulead, etc... but at least it is a start.Good luck.
-
My DVD drive reads the disc.
My bed DVD player is no longer the disc I insert and when I Explorer, it looks like this;
http://S22.postimg.org/5ggim2xy9/capture.jpg
How should I do?
Hello
Thanks for the reply.
There are various reasons why a CD or DVD drive is not detected. The resolutions that are listed in this article can help in some cases but not all instances of this problem.
Perform the steps mentioned in the article and check the results after each step.
Your CD-ROM or DVD drive is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060/en-AU
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/en-us
Hope this information helps. Response with status so that we can help you.
Maybe you are looking for
-
Why the arrow of 'hide ads' Yahoo email does not appear on Mozilla?
It does on Google Chrome. Contacted Yahoo about this and they suggested might be a Mozilla issue, and I'm tending to agree. It used to work perfectly. Is there a "fix" for this anywhere?
-
Is there a way I can use Access Software Inc. Links LS, or one of the golf courses
I lost interest a few years ago. Just noticed all of these courses I. Y at - it a patch or program or another way to be able to use these programs (386 links or Links LS) or at least to be able to use the courses? I had read that the software was sol
-
57 a error code during the installation of Windows Update KB2598290
Windows downloding this update, but allow to install this update 57 a error code during the installation of Windows Update KB2598290
-
Windows 7 does not recognize the SD card in the Device Manager
That pretty much sums up it. I can't understand. my SD card is not launched in 'my computer', but my device manager recognizes it, and little noise "da dup" turns on when I put the SD card in and out. Please help me, I have pictures of my studies tha
-
Hi, since I have updated the software to 10.2.1.537 my ringtone will not work. When I go in to Notifications, requests and it says the phone ringing, I chose (Ac-Cent-Tchu-Ate the Positive), but when my phone rings its some random generic ringtone.