My DVD drive reads the disc.

Similar Questions

• DVD RW DRIVE reads the disc as not empty on iTunes

  Try to burn a CD on iTunes and the message shows that the disc is not empty. Explore Alaska DVD RW (e :)) 2010) E:drive views I deleted 'alaska' 2010 but it replace it. Can't burn the CD even though I used it several times before without a problem.

  Hi Haagah,

  1. are you able to burn the disc from the Windows DVD burner?
  2. you have any third-party CD burning software installed on your computer?
  3. don't you label your CD using Windows Explorer?
  4 is the DVD read write drive?

  Measures taken before burning the disc.

  Reference:

  If you have trouble burning a CD or DVD
  http://docs.info.Apple.com/article.html?path=iTunesWin/9.2/en/15326.html

  Reference:

  Can't burn a CD in iTunes for Windows
  http://support.Apple.com/kb/TS1436

  I also suggest you for this visit below link provided to solve the problem of burning.

  iTunes for Windows: additional troubleshooting questions burning tips
  http://support.Apple.com/kb/TS1374

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Equium P200 - DVD drive reads all discs

  My DVD player just started reading some disks and not others, as some records are not read all the time, you can put a disk in, click on the dvd drive and it will open the player and say insert a disc, the device manager says device working properly and up to date driver.

  Does anyone know what is the problem?

  How understanding your problem if you have written on some and other disks?
  Can you explain what it more detailed?

• CD/dvd drive reads all discs

  I have Dell inspiron 6000 with windows XP home. My Cd/DVD drive was working fine. Able to play any disc. Now, recently, he stopped recognizising all disks. I tried to get back the driver, updating the driver, uninstalling the driver and reload the driver, without success. I remember, previously, that I had similar problem a few years back when I downloaded the SP3 and microsft corrected using my computer remotely. I don't know what they were doing. But again today same problem. Microsoft will not help as they say now want to pay now. Could you help to get my cd/dvd drive works again. Thank you

  Most likely the drive failed / dies and must be replaced.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• My hard drive is not even read the disc (Dragon Age: Origins)

  Today I bought a new video game for PC (Dragon Age: Origins).
  After inserting the disc, I thought I could hear the drive reading the disc, but it kept stopping.

  This ended up in my computer not give me an error message saying that there is problem... it's almost as if he thinks that I have never inserted the disc.

  So I tried to run another game disc, and he managed to read the disc.

  Please help :(

  the required for the game is the following:

  OS: Windows XP (SP3) or Windows nice (SP1) or Windows 7
  Processor: Processor Intel Core 2 SINGLE 1.6 GHz or equivalent AMD Athlon 64 2/0 GHz processor or equivalent
  RAM: 1 GB (1.5 GB Vista and Windows 7)
  Disc drive: DVD ROM required
  Hard drive: 20 GB of disk space

  and I guess that video and sound are not the problem here.

  I'm not a 'computer' wiz or anything either, but after reading the label of my system, it seems that the requirements very well.
  they are here:

  OS: Windows Vista 64 - bit family Premium SP1
  Processor: Intel Core 2 Q6600 Quad-Core
  RAM: 4 GB DDR2
  Disk drive: Super multiformat DVD + RW DL with Labelflash
  HDD: 750 GB

  ... As you can see, taking me the time to post all this place really shows how frustrated I am... so please Helo me ASAP :(

  It is possible that you have a bad DVD drive.  Try it in another computer (a friend or relative) and if it didn't work for them either, you may have to contact the company for a replacement drive.  If it works on their computer and not yours, you may need an update of the firmware of your DVD player to make it compatible with the disc.  It is a rare event, but can happen.  You will need to go to the website where you made your computer and download the update of the firmware if available.

• My DvD drive in my HP laptop is not reading the disc... I have something to turn it off?

  My dvd player in my hp laptop is not reading the disc... any ideas

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• I inserted a DVD into my Dell studioxps and it won't read the disc or allow me to eject. Suggestions?

  I inserted a DVD into my Dell studio xps and it won't read the disc or allow me to eject. Suggestions?

  Check your computer manual or support web site to find the emergency disk eject function and use.  So do not put the drive back.  :-)

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• Not possible to burn a DVD-tells me that it cannot read the disc

  What do I need to get windows or any other media player to burn a dvd movie cause that he told me that it can not read the disc. If someone can tell me what I please

  The only version of XP that included the possibility of creating a
  DVD-video is Windows XP Media Center Edition 2005.
  What has been consulted through Windows Movie Maker and
  was not shown to be extremely reliable.

  Beyond that... you need DVD Authoring software. The
  following freeware is an example:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Windows cannot read the disc in the drive F:\

  Hello

  HP laptop with Windows 7 Home Basic 64 bit, I bought the CD room worked well and I did not use the CD room for a long time so I inserted the blank CD and when I had just the triad to open the CD drive f:\ he says «Windows is unable to read the disc in the drive F:\» "and when I triad to burn the image on CD, it says"Windows can not burn the image drive f:\, please insert a writable disc in drive f:\. "and I triad to see if GTA IV Episode From Liberty City CD will work or not it worked but did not show the CD icon and the Autorun does not work and I tried other CD and I had the same problem that the autorun does not work and no icon for the CD.
  Here are some pictures:
  http://imgur.com/a/2vTXl#0

  I knew how to fix it

  Here is the http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-does-not-recognise-a-blank-disc-in-a-dvd/d6bed94f-c9df-45fd-9a54-51d5d5575b91 solution.

• HP Pavilion desktop computer - 550-a114: drive is not reading the disc

  When I put a disc in the CD/DVD drive, it runs but nothing else happens.

  Also, I'm new to Windows 10.  Why can I not see the DVD drive from the list of products covered by this PC?

  Thanks for trying to help.  Online tech had fixed.  The plug goes from the drive to the motherboard had dislocation (in this way right out of the box store).  I had to open the tower and plug it back together and now it works fine.

• Windows Vista CD problems - "Windows cannot read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes.

  Original title: problems of Windows Vista CD

  Windows Vista Home premium. You want to burn on a CD - RW disc image files. Inserted the disc in the drive and got the message "Windows is unable to read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes. If the drive is not formatted, you must format it before you use it. "I can't get a dialog to come so that I could format. Not had this problem with a disc previous out of the box Memorex even.

  My problem has been resolved by the www.mydigitallife.info/autoplayautorun-not-working-or-missing-not-open-in-windows-vista/ procedure. The first element - material Detection service kernel - managed.

• My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

  My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

  Hello

  I see nothing unusual, except that there should be a "0001", or even "0002"...

  When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

  Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

• I am trying to download Adobe Acrobat 8 Professional, because the disk drive on my computer will not read the disc. I can't link to this download.

  I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Cannot read the disc for dragon 11, but will read and download dragon 9

  I can install version 9 of Dragon, but when I tried to upgrade to Dragon 11, it wouldn't read the disc of Dragon 11.

  I checked the disk on my laptop, and read 11 Dragon, she could not install the software for cause of memory.

  Hello

  · Another CD/DVD is getting recognized on the computer?

  Here are a few options you can try:

  1. you can download Dragon 11 on the manufacturer's Web site and try to upgrade.

  Link for reference: http://shop.nuance.com/store/nuanceus/DisplayHomePage?resid=Tj5UDQoBAlYAAAT0MkUAAAAD&rests=1312707596649

  2. install the application of the dish:

  a. Insert the Setup on the laptop disk.

  b. start Windows Explorer.

  (c) in Windows Explorer, click to select the drive for the installation disc.

  d. in the Edit menu, click Select all.

  e. in the Edit menu, click on copy.

  f. and paste it into an external USB drive or a USB flash drive.

  g. plug in the drive to the computer where you want to install Dragon 11

  h. on the file menu, point to new, click folder, type Setup 11 Dragon, and then press ENTER.

  i. double-click the folder and then click on paste on the Edit menu.

  j. double-click Setup.exe, and then follow the instructions that appear.

  You can also access: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641