CD of Optiarc dvd rw 7560 s works is not on the HCL laptop

Similar Questions

• Webcam doesn't work is not in the new laptop

  Hello you can someone plz help me.i got a new laptop but the webcam is work.am new to computers a need all the help I can get thanks

  Hello loklan,

  1. what exactly happens when you try to use the Webcam, you get an error?

  2. have you checked if the drivers and the software is installed for your webcam?

  Ideally, you should be able to launch the webcam using the program that is installed on the computer of the Original Equipment Manufacturer (OEM).

  If you are having problems opening the Webcam with instant messaging clients, see below section which will give you information on fixing this problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Ethernet doesn't work is not on the new laptop of Win8.

  Just bought a new laptop to run a FullSpectrum LAser cutting machine. I was running the laser with my 4gig RAM Dell Latitude E5400. It worked perfectly. Connected to the internet with my rounter wireless home and connected to the laser with short Ethernet cable. I needed one more big computer RAM won the Dell Inspiron 15 of WIn8. Redownloaded the pilot controller/Laser but the computer cannot connect to the laser. When I ping IP laser, the laptop can not see. In the section networking and sharing/change the adapter settings, ther is a big red X next to the Ethernet icon. Help, please!

  Hi Ruth. Thanks for the help. I had the problem solved. In this case, if I disable the Wifi connection to the Internet, my computer connects to my laser properly cutting machine via the Ethernet port perfectly. I can then turn on wifi and the laser and the internet connection are functioning properly. Thanks again for the help online

  Gerry

• Maybe wireless router not working only not with the new laptop.

  I have a Cisco's Linksys wireless router. I got it for about 2 or 3 years. We bought after we bought our old laptop with Windows 7, but we have a new laptop with Windows 8. Now after about a month or two after that, we had this new laptop, the router started to turn on / turn off. What this has to do with Windows 8? I have to update the drivers of my router?

  Fine thank you. You answered a question I had. Now, I'll go find similar questions we have answered about the light that turns orange and stops flashing. Thank you once again.

• A VCR tape was copied on a DVD. Play on TV, but not on the computer. Can it be fixed?

  A VCR tape was copied on a DVD.   Plays on TV but not on the computer.   This problem can be corrected?

  A VCR tape was copied on a DVD.   Plays on TV but not on the computer.   This problem can be corrected?

  ==============================================
  Can successfully play you commercial DVDs on this computer?

  IF you go to... Start / computer... and left click of the drive letter
  the DVD player is he will play?

  Media Player freeware at the following address may be worth a try... it will be
  play anything:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• ArcSoft PhotoImpression 6 - when the dvd is in fact I can not play the television-says damaged disc

  When the dvd is in fact I can not play the television-says damaged disc. But he plays on the computer. I want to play on television.  Also I have a number of pictures on this program in the files and want to sort by number. = How do I do?

  Perhaps you should ask to Arcsoft?

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• USB doesn't work is not on the external hard drive

  I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

  Hi Chaser07,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you try to use an external hard drive on another USB plug and check if it works.

  Method 2:

  Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click run now in the link below to diagnose and fix problems automatically.

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Check whether the problem is resolved.

  Method 3:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Check whether the problem is resolved.

  Method 4:

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• Search works is not in the people app

  When I search in the people App, I have 'no result '.  I tried to uninstall and reinstall the suite app people.  Is there any solution for this?  I should be able to search a person's name.

  Hi Jim,.

  Welcome to the Microsoft community where you can find all the answers related to Windows.
  
  According to the description, you are having problems with the search function doesn't work is not in the people App.
  Proceed as from the link below and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
   
  Answer to us if you are having problems with the people App or any other issue of Windows, and we would be happy to help you.
   
   
  Good day!
   
  Hope this information helps.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.

  I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.

  A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.

  I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»
  could someone help please.
  Thank you.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  =======================================

  As needed check with the Sony Support, their drivers and documentation online and ask in their forums
  on the problems known.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• CD/DVD drives not working only not on the two PC running Vista, heeeeeelp!

  Hi guys, two PCs, which is new, both running Vista decided that the installed CD/DVD readers shouldn't work!

  The new PC reads a CD/DVD when inserted (lamps flash to recognize this is something), then nothing (Autoplay is configured to use iTunes ) so I'm going to, click on 'Computer' on the disc, and he says "insert a disc into the DVD drive (f) "

  So, I installed the MS auto fix jobbie and it says ' insert readable media...» "I've had (several store bought CD and DVD all failed to save) then I tried to search the upper and lower filter using regedit, but there is no file with this name in the folder on the drive.

  Device Manager indicates that drivers are up to date, and the device does not work, even though I have many distinguishing!

  Apparently, it is specific to Vista, but suggested courses of action left me with an even worse urge to kick the bloody things around the House that I had when I tried to play the CD in the first place, any help from you lovely people would be most appreciated. Thank you, James :)

  Hello

  If you have too many programs loading CD/DVD they can collide with each other as they
  competition for resources. These will be workload often pieces of themselves in memory at startup
  so it will have an effect, even if not to use. If you have installed some of these
  lately trying to uninstall it to see if it has an impact.

  --------------------------------------------------------------------------------------------------------

  This troubleshooting help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Lite-On IT SHM-165P6S DVD writer doesn't work is not and does not recognize media

  DVD recognized in Device Mgr and Explorer of the victory but he is unable to work or to recognize all media...

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116