Similar Questions

• Update portable drive to SSD, problems with the installation of operating system and recovery system

  Compaq Presario CQ71, (model CQ71-317EA) portable system, Windows 7 family 64 - bit edition

  Hi, I tried to upgrade the original 320 GB HDD to a 256 GB SSD.

  After that replacement of the naked NTFS hard drive to SSD format, I tried to do a "factory restore" using the DVD, I created some time ago about recovery. The DVD started and recovery program ran very well, first menus for recovery/system control etc. The problem is that the program would not be allowed a resumption of the plant as the HDD was little different/more than the installed hard drive to factory.

  This is the point I'm stuck at, I reassembled the original hard drive while I find a solution.

  Is it possible to find a workaround to avoid having to order a new disc of Windows 7? Any help and advice in terms of simple-ish would be greatly appreciated. Thank you.

  Bagpuss

  Hello:

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can make your own plain W7 x 64 Home Premium installation media and use the product key to activate the installation.

  Download the applicable version of the W7 from the link below.  Use the SP1 media files regenerate.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

  Then use this tool to transfer the ISO file downloaded on a key USB 4 GB or DVD.  The tool will make the DVD or drive bootable flash as well.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• spontaneous recovery system popup

  My new ATC Aspire works fine as far as I can tell.  However, when I played a game installed on my C: drive (which I often play), an Acer recovery system is spontaneously popped up. I clicked it, there was a screen that prompted me to OK a factory reset, though I would lose all my C: drive. Of course I cancelled.

  For me it seemed to indicate that 1) I had asked this reset, which I did not, or 2) the system has detected a problem that caused the need for the recovery to run system, which I don't think I do since everything works perfectly.

  Should I worry about this?  That this has something to do with the fact that I booked 10 Windows?

  kcasey,

  I'm sure that this popup tries to remind allows you to create a recovery drive USB Acer factory default.

  I strongly encourage you to do so immediately.

  I have two TC-605 and my neighbor has a TC-605.  Some TC-605 requires only a 16 GB USB flash drive while others require a 32 GB USB flash drive.  So I would say get a 32 GB USB flash drive.  They are around $9.00 to best buy.

  No doubt create a USB key factory default recovery before upgrade you to Windows 10. (And your acer applications and drivers on a backup DVD too)

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/26286/~/create-a-Acer-factory-default-backup-in...

  https://www.YouTube.com/watch?v=He10GEuVATA

  Edit: If you do not create a backup default factory USB and something breaks down the road, fresh Acer $ 45 to get the default value of the factory recovery disks.

• Explorer.exe (I think) breaks down regularly

  Hello

  First, I will begin by saying that I am not entirely sure of the weather or not this is the right category. So, I want to apologize if it is not.

  My problem is that explorer.exe (or at least I think it's explorer.exe) breaks down regularly. It happens when I am opening the files, making things with files (such as copy, rename, Zipper,...), or simply at random intervals. Then the image of the desktop background and the icons on the desktop disappear, leaving me with a purple background. The same happens for all the icons and the clock in the taskbar.

  Usually, it recovers after a few seconds, open records in the process of closing. When it isn't, it can be retrieved manually by running explorer.exe in Task Manager (this is why I suspect task manager).

  Sometimes it seems to get into a loop of crash, constantly crashing, recovering a few seconds later and then crashing again. This can be stopped by killink 'Windows verkenner' task, or translated: 'Windows Explorer' in the Task Manager. From, it still often causes only to crash again then, so then I have to use the cmd to do what I would normally be in the Solution Explorer, or restart my computer hoping that it will work next time.

  While this problem is not very harmful to my computer (or so I think), it's getting very annoying, especially since it ig going more frequently over time.

  I have already disabled the windows updates, because the problem always seems to worsen after updates.

  He has especially much worse after upgrade my computer to windows 8.1 (which was already earlier). He never continued to work for a minute then, and I did a system recovery to restore windows 8.0.

  I had this problem basically since I've had this laptop (which was in September), but I have not found a solution for this. I've done various analyses of viruses and malware, and I'm sure that it is not caused by a virus.

  If anyone knows a fix work for this, so I'd be very happy.

  Thanks in advance.

  ~ Ben

  If Windows 8 comes with the laptop, then you must take the issue by the manufacturer of the laptop.

  There may be a policy for downgrading to Windows 7.

  What you are experiencing with Windows 8 is not typical and I would recommend to take up the issue with the manufacturer of the laptop because it's their responsibility, under warranty, to make sure everything is working properly, including the software.

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• If my computer breaks down how am I supposed to get my files that are saved back.

  If my computer breaks down how am I supposed to get my files that are saved back.

  Barjakes

  What operating system are you currently using?
  If you use Windows 7 try from here.
  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

• System does not close completely down.

  Hello

  I have a Pavilion laptop, G6, with Windows 8, and it seems not entirely closed. It will go to the closure of screen and then the screen turns white and the laptop seems to be in a low power state. Start button / stop is turned on and the Wifi button.

  I tried:

  • Removing battery
  • System restore
  • Remove the battery and hold the power button for 20 seconds

  Any help would be popular!

  Appreciation,

  Windows 8 comes with diagnostic tools very good - if you have not had previous experiences, their execution, this is probably a time familiarizing yourself with the Toolbox:

  Laptop computers HP - test of hardware failures (Windows 8) - c03467259

  The issuemight be if the system shutdown due to software, in other words, something in the environment of OS, then it might be in the BIOS (down a real operating system level) or in the material.

  This does not mean you na not miss something in the operating system-, but there are tools to help you refine the hotbeds of tension of material possible and eliminate these in the list.

  What to do next?

  If the extracted material - if you can't find the problem, if the problem is hardware, or if the question remains a mystery and you're ready to throw your computer out the window beautful - wait!

  You didn't have the system very long if you're running Windows 8 on - call HP directly for assistance.  If the system experiences a hardware failure, the call earlier rather than later is better.  It will not very long to fix.

  Before you call HP:

  Run the command "SFC/scannow" at startup or in Windows 8

  ==================================================================================

  • Make sure all your drivers are up to date - they are, or you wouldn't ask for help - it's basic Admin 101.

  Start by creating a place to which you can go back in case things do not work as you expect:

  Create a restore point

  Install the software and drivers from the HP site

  Go to the top of the page of the forum Support and drivers HP

  • If you are prompted, enter your country or region and
  • Enter your computer model information
  • Access to the software and drivers...
  • Enter your operating system from the menu drop-down...  Scroll to the bottom
  • Select the desired category Software - Solutions > driver - keyboard, mouse and input devices

  NOTE: Download ONLY the concerned drivers and software for YOUR hardware - note that in the website you can find more than one kind of driver for more than one computer model - it's normal, but it does not mean that YOUR computer uses all proposed software.

  • Develop and decide if you need to install this package.
  • Make sure that you download and install only the latest versions of each driver or program.
  • Save the Setup *.exe appropriate on your computer package

  NOTE name and location -likely the *.exe file to save to "downloads".

  • Install the software / driver installation package: If you have control of "Admin", you can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  NOTE: sometimes there is a lot of information in the computer Web site.  Take a look at what's available and bookmark the page later.

  ==================================================================================

  If you decide to update your BIOS,

  • Disconnect all the USB drives
  • Always run power cable
  • Do not touch the system while the update is in progress
  • Optional: leave wireless touch YOU, but turn off the router (make sure that there is no interruption)

  ===================================================================================

  • Make sure your system is saved AND make an Image of your system in case you need to send to the computer for repair:

  History of files is very easy to use.  He works on 'Libraries' and essentially backup of your default user account.  To add a folder to your libraries, right-click on > add to library > if you have the 'create new library '.  Pouf!  The folder is added to the history of the file backup.

  If you do not have a hot spare hanging out for your file history to write, buy a 64 GB USB key and use it - Poof! Instant historical destination of files disk.

  HP - backup of your files (Windows 8) computers

  A custom Image for the 'rest' of your computer - Nice:

  It's the Windows 8 Refresh , which also backs up your programs / applications.

  Create a custom recovery tool to update your PC in Windows 8

  When you call HP:

  Have your information at your fingertips: product number, serial number, contract number (if you have CarePack)

  • Be prepared to tell your story to more than one person.
  • Be polite, persistent and articlulate.  Don't waste time yelling at the tech.  They have lives.
  • If you do not speak to someone who understands your problem, ask to speak to someone else.  You have the right to be heard.
  • Be Polite, persistent and be prepared to repeat yourself (as I do here).

  Good luck!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  See a Post that is useful, makes you smile, or who teaches you something you didn't know?

  Your HP Experts are here to help.

  Click on the Stars Kudos to say thank you for the help.

  When a fix / workaround is successful:

  Click on this message "accept as Solution" to make it easier for others to find the Solution.

  Year of 2012 2013 snake Dragon

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• OneKey Recovery System killed my S10-2

  My S10 - 2 has been seen frequent random restarts. I thought to use OneKey Recovery System since my file system may be damaged. Unfortunately, the restored process has failed and I had to manually shut down the system.

  Now, at the start, I just get a white screen with this message:

  "Remove the disks or other media."  Press a key to reboot ".

  I can't boot into Windows, or even to re-run the process of OneKey.

  is the dead S10? no warranty left.

  I should not have used OneKey Recovery System. I was just very frustrated with the random reboots and the thought of all reset the original factory settings and start Win7.  now the S10 has met a premature end.

  Thanks for any advice.

  Apparently, onekey recovery system wiped out my existing operating system.

  have to reinstall a new operating system.

• My SYSTEM WINDOWS 7 has been down since 09/25/12, I get an error on all solutions.

  My SYSTEM WINDOWS 7 has been down since 09/25/12, I get an (error) on all the solutions, I can't have a phone number to talk to a person.

  What the computer does? Have what solutions you tried?

  You may need to start over with a clean slate. A facility "to return to the factory" would get your system operational return...

  Note that unless you save all the important things, it would be lost after the reset. If your computer does not at all to the top, you will need to remove the hard drive and connect it to another computer in order to save the important things...

  Re start over... Your computer is equipped with a recovery instead of disk partition...

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, restart and until that screen "Advanced Boot Options" appears, press "F8".

  You may need to try several times to get everything above to work. If after several attempts, you have no chance, or the machine indicates that there is no recovery partition, your only option is to contact the computer manufacturer and ask for the model recovery discs...

  After the reset, you should get all the updates from Windows Update EXCEPT for hardware devices. Then, you install a good antivirus. ONLY AFTER you have done this, if you replace the stuff of backups or install anything else.

• What happens if my external drive "working files" breaks down?

  I use two external drives to save and back up my files.  The files organized, edited the reader of 'work'.  If the drive working breaks down, how can I restore it from the player of "backup" that contains just the original, unmodified, the files placed in folders by date of importation?  I realize that catalogue contains all the changes, but how to return to the Organization?  Anyone using a Raid 1 configuration for two disks mirrored?

  Maybe I don't make myself clear. How to take the 'back-up' disc, containing original photos not published, ordered by date of import and convert the disc format 'work' catalogue in the LR4 will recognize?

  It's great that you think about it now, instead of this disaster.  Play well!

  The "second copy" option in the dialog box import is ideal for temporary backup, while the pictures in your main backup system, but it is a nightmare to restore from.  There are options to rearrange disaster, but it is better to avoid.

  Rather than RAID1, I would suggest looking at backup synchronization software or a file - I love Vice Versa on Windows or Chronosync on Mac - to keep a copy in the mirror of the work unit.  If you use RAID1 and photo gets deleted or damaged, it is immediately deleted/damaged on the second disk RAID, while the file backup/synchronization software would go less often, giving you a chance to recover it.  Many also offer one option 'archive' for deleted photos, moving them to another folder.

• Options recovery system for Satellite A300D - 14 d

  Hello

  I'm having some problems with the system Rocevery Options on A300D - 14 d

  I installed Fedora 9, BUT did not uninstall Windows Vista. I mean, the computer now has a dual boot.

  All these files on system always here. That hide the partition where is this folder and some files recovery system called HDDRecovery is also there.

  Fedora works fine and I can access the all files Vista system, but if I choose Vista it restarts the computer while loading the OS. If I choose the Options of the Rocevery system, I got:

  * + The installed program cannot start. Click OK to turn off the computer. + *

  Indeed, he turns off the computer if I click OK.

  I also tried to install Windows XP, but after checking, system installation just stops at a black screen and won't forward.

  Is it possible to do a startup and system recovery disk? Do not forget that I can't start Windows Vista.

  Thank you

  Hi again,

  It is resolved. I was getting an error 0 x 24, which I couldn't see before because the error of the report was disable.

  I downloaded the Windows Vista Recovery Disc available [here | http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/] and he picked up the system.

  For sure I am now a recovery DVD. I didn't know that this laptop has a system of recovery only inside the HD.

  Thank you

• Firefox hangs and I don't know where to find "subject: breaks down.

  In recent weeks, Firefox started to plant several times and quit unexpectedly - especially when I click to open it. I often get the annoying message "well, this is embarrassing." More useless. I sent the report of the accident and expect to hear from you as to why I have problems, but nothing happens. I can't find how to locate the ' topic: breaks down ' in the address bar. Can you explain this.

  On a Mac, it's Cmd + L to go to the address bar.

  If you have submitted incident Breakpad reports then it would help if you post the ID of one or more reports of incidents Breakpad.
  You can find the ID of the submitted crash reports on the Subject: hangs page.
  You can open the Subject: hangs page through the address bar just like you open a Web site (topic: is a protocol for accessing the internal pages).
  A GUID crash looks like: bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx

  You can copy and paste the links or the crash IDs of some of the most recent accidents, and post them on this forum.

• Partition recovery & system NB250-108

  Hello!
  How can I recover/reinstall the SYSTEM (e) partition on my NB250-108 because I did something stupid and messed up my SYSTEM partition (E :) so that no software resides in this score now.

  The information I want is what should be the Partition sizes for the DATA (d) and SYSTETM (e), what software should I have installed under the SYSTEM partition and is at - it all URLS where I can download it from, this software also must be made bootable? (for recovery system etc.).

  Please note: I'm still all software should I under the partition DATA (d :)) and its single partition SYSTEM (E :) software missing.) I hope not to have to pay for the recovery DVDs!

  Thanks a lot for your help and your suggestions.

  Hello

  > The information I want is what should be the Partition sizes for the DATA (d) and SYSTETM (e), what software should I have installed under the SYSTEM partition and is at - it all URLS where I can download it from, this software also must be made bootable? (for recovery system etc.).

  No, you can't download the image of Toshiba.
  If you want to install the Toshiba Recovery disk image, then you must order the CD from here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Then you would be able to reinstall the image of Toshiba, but for this you will need an external USB CD/DVD drive.

  The other possibility.
  You could install a fresh Windows 7 operating system with a USB key.
  To do this, you would need something like Wintoflash
  http://WinToFlash.com/home/en/

  Need driver can be downloaded from the Toshiba driver page

• How can I make sure that my music on my Ipod Classic is not lost forever, if it breaks down?

  How can I make sure that my library of music on my Ipod Classic is not lost forever, if it breaks down?

  Back it up.

  Your music library should never exist only on your iPod.  It must be present on a computer in iTunes, and to be sure it must be saved on an external drive also.

  If your library no longer exists on your computer for whatever, reason, you need to extract the iPod.

  turingtest2 offers you several ways to do this in his user tip found here:

  Recover your iTunes from your iPod or an iOS device

• I have Windows XP Professional Version 2002, service Pack 2. I have this operating system in English only. Now, I would like to add Arabic language. How can I do?

  I have Windows XP Professional Version 2002, service Pack 2.  I have this operating system in English only.  Now, I would like to add Arabic language.  How can I do?

  Hello

  You want to change the display language on the system or the keyboard layout?

  Method 1:

  Language packs

  http://Windows.Microsoft.com/en-us/Windows/language-packs#lptabs=XP

  Method 2:

  a.Click Start and then click Control Panel.

  b. double-click regional and Language Options.

  c the languages tab, click details, and then click Add.

  d.Under an input language, add the language that you want to use.

  e.Under configuration keyboard/IME, click the keyboard layout you want, and then click OK.

  List of languages supported in Windows 2000, Windows XP and Windows Server 2003

  http://support.Microsoft.com/kb/292246

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.