cDAQ-9172 error message 200485 in Labview and 88705 Max

Similar Questions

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• I have three problems___the is first I get the error messages form I mesh and cannot access my profile or friends list ' ___Microsoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  I get the error messages form I mesh and cannot access my profile or friends list '

  MIicrosoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  For iMesh, you can go here...

  http://www.iMesh.com/community.html

  I don't understand the other two problems that you encounter.  If you please would explain what they are and what, if any, error messages that you receive.  Also, what antivirus do you use, and you run Windows XP SP3?

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• Error message "install" is damaged and cannot be opened. You must eject the disk image. How to solve that this tried 12 times on a Mac with El Capitano

  I am trying to download Photoshop CS5 Extended on a new iMac to replace my old version of Windows. I downloaded 12 times and once I open the program installation an error message 'installation is damaged and cannot be opened. You must eject the disk image. Any ideas how to solve the problem please.

  Hello

  Photoshop CS5 is not compatible with MAC El Capitano, which is the version OS x 10.11. Please access the link as follows to check the system requirements for the installation of Photoshop CS5, which is MAC OS X 10.5.7 or v1.06.

  Configuration of Photoshop

  Thank you.

• When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  Hi rhondas44981464,

  Try to use the export to PDF online service https://cloud.acrobat.com/exportpdf (Sign In using your adobe ID, in which you have the subscription).

  Kind regards
  Nicos

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Error messages on both Mac and iPod activation

  Hello

  Suddenly, I found that I can not connect to iMessage from anywhere. Last post, I sent with success was Saturday and discovered the problem Monday. The problem persists.

  I use an iPod Touch 5 Gen with iOS 9.3.2 and El Capitan 10.11.5.

  I've seen similar complaints, but for only one device (where the last resort was restoring, which does not apply to my Mac).

  If this happens the two devices then it must be something other than the correct settings of the device?

  I can access my iCloud/AppleID account without any problem, time on the iPod, the settings are correct, everything works fine.

  Can anyone help with this? Or at least point me the right direction to contact Apple about this?

  Thank you very much!

  

  Messages - cannot open a session

  During the processing of registration error messages-

• Error message on Windows 2003 and Satellite M40x-184

  Hello
  my laptop is Satellite M40x-184
  with Os Xp Home edition
  I want to insatall a second operating system which is Windows 2003
  but when installing it, came a problem and gives me a blue screen with this message:

  "' hardware malfunction nmi parity check / memory parity error is interrupted" "

  Please tell me how can I install 2 Os xp home edition and Windows 2003

  Thank you

  Hello

  This error message can occur if a hardware component malfunctions, or if it has installed the damaged or incompatible drivers.
  To resolve this issue remove additional memory modules that are installed on the computer, leaving only the minimum required for the computer to start and run Windows. Restart the computer to see if the error messages persist.

  This issue has been described on the Microsoft Web site.
  Please see this site:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315223&product=winxp

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Displays the error message when download itunes and other updates, not microsoft... says mode without failure or installer problem

  Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.

  Hi PeterLloyd,

  (1) what is the complete error message you receive?

  (2) what version of Windows you are using on the computer?

  (3) updates are you referring?

  Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Halo: Combat Evolved for PC works only on Windows Vista - Error Message "" unload the debugger, and then try again."

  I'm having a problem running Halo: Combat Evolved on Windows Vista. I can insert the disc and install the game without problem. The problem is that when I try to launch the game, I get error message saying "" unload the debugger, and then try again." I tried to install some of Halo patches to see if that would fix the error (for example, 1.6 and 1.7), but when I try and open the patch .exe file I get an error message telling me to go to a microsoft Web site or try to update the game manually. In addition, I tried to contact Gearbox Software to see if they could help me, all they said was to contact Microsoft.

  Does anyone have any suggestions as to why the game does not work for me and how can I make it work?

  Let me know, thanks. :)

  Hello whyohwhy42,

  I suggest that you follow the section below. This includes various possible steps to solve this problem:

  http://support.Microsoft.com/kb/812759

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot download 10 windows XP and IE 8 security updates. for all error messages are either: 0x800700D and 0 x 8007002.

  Cannot download 10 windows XP and IE 8 security updates from microsoft windows update site. for all error messages are 0x800700D or 0 x 8007002.  Please help thanks.

  Thank you.

  Hi Pauli,

  See following documents to troubleshoot Windows Update error 0 x 8007002 & 0x800700D (scroll down to section fix it myself ).

• XP stopped working - error message mentions rundll32.exe and activation XP

  So in the middle of downloading something last night my Avast anti virus kicks and says something about the files looking for suspects. Immediately, I cancelled the download and was 99% sure that I had deleted all the files wrong. This morning, however, when I turned on my laptop computer it wouldn't let me load XP and came up with an error message of not being able to read the license for windows and needed me to activate it. When I click on 'no' my desktop background loads, but nothing happens when I click 'Yes', load of my wallpaper and a box will appear where I presume he was telling me how to activate it, only nothing loaded. I guess that he should be connected to the internet which, for some reason, he did not and I had no access to anything else; No start button, no task manager, Control Panel No.

  Luckily my laptop has been implemented with a dual boot in order to start and use the partition with the original OS that came on the laptop (Vista) to access the XP drive. As the error previous message stated rundll32.exe they advised me to replace it and and then scan with Malwarebyte s Anti Malware and removed all infected files that came. But nothing has changed.

  Could I have deleted something that is used in conjunction with the rundll32.exe? If Yes, what? And is there anyway to get it back?

  I have read similar problems online and advice has been to start the XP cd to repair or reinstall, but how am I wanted to do when I can not load even XP to access the CD drive?

  Can anyone help?

  Florie

  Hi Florieness,

  · What is the exact error message that you receive with the error code as appropriate?

  · What is the service pack installed on the computer?

  · What is the number and the model of the computer?

  Try the methods below:

  Method 1:

  Try to perform the last good configuration on the computer and check if you are able to boot to the desktop. You can check the link for the steps below: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 2:

  If the first method does not work, you can follow the procedure (method 2) from the link below and check off the results: you are prompted to activate Windows XP or Windows Server 2003, each time that you start the computer: http://support.microsoft.com/kb/312295

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Dell P703w printer. Will NOT SCAN... no error message... lights and nonething happens?

  DELL P703W PRINTER.  SCANNING WILL NOT WORK WITHOUT ERROR MESSAGE.

  Hi JQSE,

  Uninstall the printer and drivers to scan following the steps below and install drivers from the Web site manufacturers.

  You can use the command to remove drivers below. Follow these steps:

  a. click on start

  b. click command prompt

  c. right-click on the option of cmd.exe and select run as administrator

  d. type: printui/s/T2

  e. opens the printer server properties page

  f. click on the port tab and remove port

  To download drivers access the link:http://support.dell.com/support/downloads/driverslist.aspx?os=WW1&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=PRN_ALL_P703W&hidos=WLH&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.