CentOS 5.5 100% CPU use 50% of the CPU of the host - very simple config

Similar Questions

• Camileo X 100 freezes using distance at the end of the clip

  A few days ago, I bought a Toshiba Camileo X 100.
  The camera is great, I like it a lot.

  However, there is a problem with the firmware I think.

  The remote control works, as planned, although there is no detail regarding its use in the manual, I had to just guess.
  The problem is the following. If you go with the remote control to play a clip, you wait until the end of the clip, and I would like to return to the previous screen, you press the Back/Cancel button on the remote control (button on the bottom right).
  If you do so, the camera freezes.

  You must turn off and on to use it.
  The bug has been confirmed by the HRP Hungary (Distributor and service in Hungary), we tested it together by phone, so he shouldn't be the problem of my specific camera.
  Could advise me on this?

  The following questions are not bugs, but during playback, it would be useful to be able to see somewhat the details of clips recorded (at least the time of registration) and to be able to define some settings for the recording, so that the camera does not forget all what to turn off the power (e.g. stabilisation or pre rec setting etc.).

  Why should you have full-screen, when you are shooting a time for a few hours, or during playback on TV?

  Thanks for any help.

  Hello zsolt,.

  I am a user of Camileo X 100, too.
  I have the same problem with the remote control.
  I tried with different languages and settings, but the problem persists.
  I'll ask toshiba support team directly. It is here only a user to user forum.

  The question you wrote 'playback', I have not.
  If I look at movies recorded, time is running out on the top of the screen, even I put the information to off (by pressing the 'i' button) before you save or watch a movie file.

  Best regards

• Red/NIC 100 Mbps card en/on the host?

  Hola:

  Me gustaria saber como tengo do para in mi vps me salgán tarjetas of 100 MB/s porque tener limitado a 10 MB/s red limited me mucho tengo como're mi caso 2 vps only.

  Hello:

  I would like to know how can I do for 100 Mbps on vps network cards because cards network of 10 MB/s limitations have me too.

  UNA consulta:

  The Máquina virtual tiene las installed VMware Tools? Me da feeling of Quebec not las tiene por eso you muestra 10 MB/s.

  Saludos!

  If upon that esta o any other campaign respuesta ha sido utility, votalas. Gracias.

  If you find this or any other information useful or appropriate, please consider giving points. Thank you.

• What is the minimum reqs to use based on the host IPS?

  I have several servers related to the internet and a basic ASA-5510.

  Apart from the purchase of the AIP - SSM and the upgrade of the 5510 license, what else is necessary to have a host-based IPS?

  Do I need to buy March or other software?

  How are the agents for safety spec'ed?

  Thank you.

  Some time ago Cisco was a really great host-based IPS, security of Cisco (CSA) officer. It's end of life and you should look for a different provider. Ditto for the MARCH central software system, which also is EOL.

  Looking for a server protection?
  With the help of the AIP - SSM is a good solution, to protect a HTTPS server, you need to think a proxy reversed in the demilitarized zone which completes the SSL and sends pure HTTP to the server of origin. Which can be inspected with a firewall-web on the proxy and also by the epi to the ASA.

  Sent by Cisco Support technique iPad App

• 35.0 Firefox uses 100% cpu on Mac Yosemite 10.10.1 then either breaks or needs force quit.

  I had this problem since installing Yosemite and using 34.0.5. I upgraded yesterday to 35.0 but still the same problem. Firefox will work happily for a while and then all of a sudden will use 100% cpu. I disabled all extensions and plug-ins and that made no difference. If I use Java (8-25), it will usually make it crash but not always.

  To make things worse, the accident report appears in Greek (which is considered in another question already).

  Have you tried to reset Firefox? Refresh Firefox – reset the parameters and modules

• Firefox and Shockwaveflash 14.0.0.145 using 100% CPU

  Firefox (v30.0) normally uses the CPU of 2 to 6%.
  When I start a video using shockwave flash 14.0.0.145, firefox uses 20 to 40% of the CPU and shockwave 50-80%.
  For the most part resulting in a total of 100% CPU usage.
  This problem occurs for a week or two.
  I am running Microsoft Vista.

  You can check for problems with the current versions of the plugin Shockwave Flash and try this:

  • Check updates for your drivers drive graphics
    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin

  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• Why Firefox uses 100% CPU when I am connected to eBay?

  Firefox uses 100% CPU when I connect eBay.

  Hi apdubois, it is useful to know that Flash is the problem but, as you point out, life without Flash is not very interactive.

  It is a standard orientation that addresses the most common reasons for problems of Flash in Firefox. I'm sure you've seen some of it before, but just in case:

  (1) make sure that all recorders/downloaders who interact with Flash media are as up-to-date as possible, or disable them temporarily.

  (2) disable graphics hardware acceleration in Firefox and Flash

  (A) in Firefox, uncheck the box here and restart:

  the button Firefox orange (or the Tools menu) > Options > advanced > General > "use hardware acceleration when available.

  (B) in Flash, see this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

  (3) turn off protected mode (Windows Vista/7/8)

  See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?

• iTunes uses 100% CPU usage

  Hi, I use the latest version of iTunes 12.3.3 on Windows 7 64 - bit with Intel Core i5 and 8 GB of RAM. Whenever I run iTunes, everything becomes so slow. I checked my PC's performance in the Task Manager and the CPU usage is 100%. The strangest part is that even if I close iTunes, it still consumes my CPU at 100%. I tried to reinstall several times. I even downloaded it three times but nothing helped.

  Hi salonpas,.

  Sorry to hear that you are having problems with iTunes on your PC. Let's see if we can get smooth it.

  Now, I know that you have already uninstalled iTunes and reinstalled, but you did in the order indicated in the article below. If this is not done in this order, usually issues will remain when you use iTunes. The order in which it should be done is this.

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  Once you have done this, try installing again.

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions
  https://support.Apple.com/en-us/HT204275

  Let me know if it helps.

  Nice day!

• Satellite Pro T130 - 14L: 100% CPU use of acpi.sys after changing the HDD to SSD

  Hello

  because I changed my for one SSD HARD drive and reinstalled Windows 7 with 64 bit on this subject, my system works frequently in 100% CPU utilization caused by kernel module acpi.sys, I discovered with process Explorer and confirmed by recording an ETL file.

  This problem occurs once an hour on average, sometimes after 10 minutes of functioning of the system and sometimes after two hours, no matter which programs are running and whether or not I is actively using the computer. When I noticed a hanging and see this 100% cpu core in the process Explorer window are currently in use, I always need to save my work (which may take a few minutes) and restart the computer.

  I could live with that, but it's pretty nasty. My bios is up to date (version 2.70), as well as my other drivers (no error and no virus found). In other forums I've read, these problems could be avoided by changing the energy registers something Windows settings as never go to sleep of the SSD, but it works in my case as I disabled all energy saving options in Windows and I still have this problem.

  Is there maybe an update of the unofficial bios that could solve this problem?
  I read in another forum, that an unofficial bios update Dell fixed a similar problem on a Dell computer.

  Can someone help me solve this problem please?

  Details of process Explorer:
  The wire with TID 160 and the start address:

  ACPI. SYS + 0X1AF7C

  suddenly starts using 100% CPU and does not stop until you restart.
  Similar problem as in this forum for a Dell PC:
  https://social.technet.Microsoft.com...UM=w7itproperf

  Unlike the Dell problem, there is no appropriate-updated bios for me, could you help me if you could tell me how to stop the kernel module (if it starts hanging or even before). Then I could at least avoid frequent restarts.

• I am running xp family on an old PC 7yr. Task mgr shows Im using 100% CPU resources veryenen, resulting in slow or frozen PC. Seems there are 60 at bottom. KS

  How can I reduce the number of processes running in the background? 100% CPU often allows. Thank you

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  More information are among the volunteers S. Stanley, hope this helps.

• Vista Enterprise using 100% CPU countiniously

  I use Vista business on dell Inspiron 6400 (had vista with laptop). The laptop has dual core processor and a CPU is used 100% without interruption since install. I have installed all updates using windows update utility. I have also disabled the indexing service and also to adjust Visual effects for best performance. The problem still exists.

  In the Task Manager, I see a peremptory touch 100% CPU graph and another pretty normal CPU graph. I have 2 GB of ram and still 1,3 GB free. I have not yet installed any software. In the list of process System Idle Process takes, 90 + CPU usage no other program uses much CPU.

  For this reason, my laptop is very slow to respond and almost useless, please help me.

  I think that I found the correct culprit this time. I tried to disable the edge of BIOS devices implemented and it worked. When narrowed "Media Card and 1394" device was causing too much hardware interrupts. My PC works fine and no CPU usage after you turn off the device. I think that the fault was in Media card on board the aircraft.

  It took me a long way to reach this solution, so to help others here you are a few steps to take to limit the problem.
  -Task Manager open to see if any software uses the CPU more than expected. If you notice any software then its easy to uninstall or disable the program at startup etc.
  -If Task Manager processors are normal and yet one or more CPU is used close to 100% and then download and run http://live.sysinternals.com/procexp.exe ProcessXP and run
  -If material interruptions take up too much cpu, then try to disable/remove your attached devices, like modems usb, wireless lan, lan card BIOS Setup etc.

  Hope this will help.

• WksCal.exe using 100% CPU

  In the resource window, I see that there are five entrances to WksCal.exe and they use 100% CPU. I thought I had solved in part this problem yesterday when I got rid of all but one of these entries. Today, they are all back. I did a full scan on my computer by using the Windows program and found nothing.

  Hi RobtC,

  WksCal.exe is the MS. Works Calendar You try to view this question in the Newsgroup discussions of works (see link below)
  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_US_77e075ae-C07C-4CE8-AAC1-e366715b1549&lang=en&CR=us
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Creative v2.2.0.129 desktop application of Cloud using 100% cpu

  Often I find creative cloud desktop idle app will be ramped up use 100% cpu for one of my cores on Mac OS X 10.10.5
  There is apparently nothing to do and I'm not using the synchronize file CC, the only thing I use the CC app for updates of applications.

  When the application pegs my CPU I usually double check that it is the culprit in the activity and then monitor exit. It's particularly annoying when that happens on the road with my Macbook Pro because at least that I pick it up quickly it makes my shorter than expected battery life.

  Does anyone else know this?

  Hi Ben,

  This link might help: High CPU or power use while only inactive

  Kind regards

  Sheena

• ESXTOP shows 100% cpu but vm is inactive

  Hello

  I have a pc with quad core intel, installed with 5.5 ESXi.

  I created a vm and installed centos 6.5 in.

  When I check the performance using esxtop, I see that all the CPU cores are 100% (attached) When vm is powered. (high in vm shows all the cpu idle)

  When I turned off the virtual machine, the host cpu to 2 per cent.

  What can I do to reduce the cpu load?

  ARO

  Yoram

  You have the following setting in the virtual machine configuration file:

  monitor_control.halt_desched = false

  This indicates ESX does not to deschedule comments when it stops.  In other words, this parameter specifies that the client should use 100% of CPU.

  If you want the computer virtual to give the CPU when it is inactive, you must remove this option.

• 100% cpu

  FF uses 100 + CPU on my MacBook, if not totally quickly updated. This, despite making all the suggested fixes, several times.

  It got so bad that it overheats my Mac constantly, causing my fan go on uninterrupted full breath, even when he is in the background, so I basically have to stop using it.

  Mozilla should take seriously and review this off-road browser.

  When they can. Many other users also need help.