CentOS 6.4 DELL OMSA error - PE 1950

Similar Questions

• Dell OMSA GUI reference works don't not with 6.4 CentOS 64 bit

  Hello

  I am trying to install the DELL OMSA on my Dell Poweredge 1950 with no luck setting the GUI part on the server, so I can use the link "https://localhost:1311" in all of our business network.

  The problem is that I've done the following to at least be able to use the CLI portion only:

  http://www.md3v.com/install-Dell-OpenManage-on-CentOS-6-4

  It is a very useful script that I found online to allow at least the installation works fine. I can't access the web interface, it continues to tell me Elinks or any external browser "unable to access".

  I also have openssl installed with wget and perl. I don't know what keeps me to get the portion of browser to work. Please help!

  Here are the currently used version of CentOS kernel:

  CentOS 2.6.32 - 358.el6.x86_64

  Thank you.

  Hello

  What version of OMSA are you using? Sometimes the older versions work better on the older hardware. What does
  

  srvadmin-services.sh status
  

  show? You may also want to try adding a non-root user to /opt/dell/srvadmin/etc/omarolemap
  

• Reference DELL OMSA 6.5 on Windows server 2012 - instalattion - cdegfc.exe error code = 259 error

  Hello, masters!

  I try to install Dell OMSA 6.5 on Windows Server 2012 x 64 and get the following installation error message: code of error cdegfc.exe = 259
  See figure available at: https://www.dropbox.com/s/ns2x73zjtkz5wig/Error_OMSA-65.PNG
  After the error message, the installation is aborted.
  I use the aministrador account to install.

  Can you help me?

  Thank you

  Diramos

  diramos

  So, I ask your help to solve my problem.

  I provided you with the cause of the error and possible resolutions in my first post. I'm not going to spend a lot of time trying to reproduce a problem and find a solution for something that is not compatible.

  diramos

  I ask you to read my previous post.

  I recommend to read my first post and look at possible causes, that I pointed out. If they do not resolve that problem, then post back with more information.

  I try to help as much as I can with material not picked up and software configurations, but since they almost always require reproducing the middle right to solve is not something that I help out carefully.

  Not supported hardware and software configurations are something that you need to fix yourself or with the help of the community. I'll give you the sense when I can.

  Thank you

• Storage DELL OMSA [Windows Server 2003 R2 64-bit] not shown [14/10/2014]

  Hi all

  I have a general question/issue. I install DELL OMSA on a poweredge 1950 using Windows Server 2003 R2 server and the only part not appearing is not in the list system is the storage controller.

  The system carries out the following:

  Dell OpenManage Server Administrator Version 5.3.0

  It shows everything except the storage controller. Please indicate how we can improve this to show the PERC controller/storage for the following:

  WX072
  1
  Assembly, Card (Circuit), Serial Attached SCSI PERC5I, 1950, 2950
  TX846
  1

  THE ASSEMBLY, CABLE, CONTROL, SERIAL ATTACHED SCSI, POWEREDGE EXPANDABLE RAID CONTROLLER NUMBER

  Thanks again as always!

  Kent C.

  Hello Kent,

  The first thing to check is to ensure that all four OMSA services are running. They appear as DSM in services. You can also make a change to the Setup from Add/Remove programs and make sure that the storage options are installed. Alternatively, you can install a newer version of OMSA http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=28KFC&fileId=3365343263&osCode=WX64&productCode=poweredge-1950&languageCode=EN&categoryId=SM

• How to install Dell OMSA on a free host VMware or VMware vSphere Hypervisor comments?

  We are virtualizing our 2012 R2 Windows Server and you have a Dell PowerEdge T310 server. We have installed vSphere hypervisor free version 5.5 on the physical server.

  Does anyone know how to install the Dell OMSA? I heard that it will not work if it is installed on the Windows Server R2 2012 host because of the virtualization layer.

  I read a few posts on how it's done, but I can't always get my head around it. I think I've also seen people install a VIB on the hypervisor vSphere itself?

  Can you please describe the General steps or point me in the right direction on how to run the OMSA? The Dell PowerEdge server has a RAID, and we must use OMSA to see a RAID controller unexpected sense errors if they are generated. We used to have a problem with consistency RAID and have had to start again before.

  He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.

  Hello

  There are a lot of articles and posts on how to install OMSA under VMware. If you encounter problems then please post an explanation of what you are having problems with. Here's a post I did on the subject. It has a link to a youtube video that includes step by step instructions:

  http://community.Spiceworks.com/topic/403141-Dell-open-mange-in-VMware

  jeff0000

  He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.

  Integration of OpenManage for VCenter requires always the OMSA agent must be installed on the hypervisor. Correct, it is not a free version of VCenter. No installation procedure who advises using VUM or VCenter should be ignored because you will not have access to these utilities.

  Thank you

• replace the SSL certificate in Dell OMSA 7.2

  My University is compels me to replace the Dell's SSL certificate in OMSA with a certificate from a certification authority.  We use InCommon.

  I generated a certificate using Microsoft IIS request.  InCommon generated the certificate and got sent back links to a variety of formats.

   as PKCS#7 Base64 encoded:
      Other available formats:
         as PKCS#7 Bin encoded:
         as X509, Base64 encoded:
         as X509 Certificate only, Base64 encoded:
         as X509 Intermediates/root only, Base64 encoded:
         as X509 Intermediates/root only Reverse, Base64 encoded
  
  Does anyone know what kind of certificate I need, and exactly how to install it in the apache server that runs Dell OMSA.
  

  Ok.  I have an answer.

  As far as I know, the interface Dell OMSA itself does not have to import the intermediate certificates (returns an error) and cannot be used to create a useful CSR (signature request) because you can't specify your own institutional settings. Our CA would not authenticate the CSR request generated by the Dell OMSA interface, even if it would incorporate new certificates (which she seems to fail at the).

  The simplest approach is to generate a CSR in Windows IIS, the authenticated certificate back from your CA, and then to export to a .pfx file (private, final, intermediate entity certificate and certificates root key, extended attributes).

  Use IBM tool called keyman (download www.ibm.com/developerworks).  Use the version of Windows.

  It can convert a .pfx file in a keystore apache in 3 easy steps.  1. create a new key file

  2 import the .pfx file 3. Save the key file.

  Tips on the internet suggest keeping all the passwords the same - pfx export, keystore, key, etc.

  Edit the server.xml file in the apache server to use your new password.

  Only downside is that your password will be readable text in the server.xml file.  In the original file server.xml file Dell used system tools or java to hide passwords.

• Can't access to Dell OMSA-how fix?

  Installed Firefox 42 on server. Allows access to Dell OMSA with IE. Firefox does not open the link. Internet research said I must go in OME preferences and check the box to allow this feature. Where is the 42 version?
  Thank you.

  Thanks for your help.
  I found an article on the web who told me to change two settings security. Now it's working. I still have to log in with the user name and password, but it's an https connection. Everything I do is close the browser to exit.

• Ubuntu 8.10 + DELL OMSA 5.5.0 - 5 i386.deb + PowerEdge 1750 No. controllers found problem [11/08/2014]

  Hi all

  PROBLEM:

  root@Ubuntu:~# omreport storage controller
  No controller found

  * Please note that the WEBGUI shows everything EXCEPT the PERC *.

  * EVERYTHING ELSE APPEARS ON THE SERVER WHEN I JOURNAL *.

  Loading via CLI:

  restart the /etc/init.d/dataeng

  restart the /etc/init.d/dsm_om_connsvc

  the /etc/init.d/snmpd restart

  I manually installed the DELL OMSA from this LINK:

  FTP://FTP.Sara.nl/pub/Sara-OMSA/dists/Dell/Sara/binary-i386/

  dellomsa_5.5.0 - 5_i386.deb

  TECHNICAL DATA:

  root@Ubuntu:~# uname - a
  Linux ubuntu 2.6.27 - 17-server #1 SMP Thu Mar 12 04:04:33 UTC 2010 i686 GNU/Linux

  root@Ubuntu:~# cat/etc/lsb-release
  DISTRIB_ID = Ubuntu
  DISTRIB_RELEASE = 8.10
  DISTRIB_CODENAME = bold
  DISTRIB_DESCRIPTION = "Ubuntu 8.10.

  * - storage
  Description: bus RAID controller
  product: PowerEdge Expandable RAID controller 4/Di
  Seller: Dell
  physical ID: 3
  Infobus: pci@0000:04:03.0
  logical name: scsi2
  version: 02
  Width: 32 bits
  Clock: 66 MHz
  capacity: storage pm bus_master cap_list pcix msi
  configuration: driver = megaraid latency = 32 mingnt = 128 megaraid_mbox = module

  * - drive
  Description: SCSI disk
  product: LD 0 RAID5 279 G
  Seller: MegaRAID
  physical ID: 2.0.0
  Infobus: scsi@2:2.0.0
  logical name: / dev/sda
  version: 412W
  size: 273GiB (293GB)
  capacity: partitioned partitioned: back
  configuration: ansiversion = signature 2 = f362db24

  root@Ubuntu:~# lspci | grep-i raid
  04:03.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4/Di (rev 02)

  PERFORMED TROUBLESHOOTING:

  root@Ubuntu:~# omreport storage controller
  No controller found

  root@Ubuntu:~# lsmod | grep-i ipmi
  2 15112 ipmi_devintf
  1 46252 ipmi_si
  ipmi_msghandler 42712 2 ipmi_devintf, ipmi_si
  root@Ubuntu:~# lsmod-i mpt
  Use: lsmod
  root@Ubuntu:~# lsmod | grep-i mpt
  mptctl 35972 0
  86756 1 mptctl mptbase
  155468 6 mptctl scsi_mod, sd_mod, sr_mod, sg, megaraid_mbox, libata
  root@Ubuntu:~# modprobe mptctl
  root@Ubuntu:~# echo $?
  0
  root@Ubuntu:~# modprobe mptbase
  root@Ubuntu:~# modprobe scsi_mod

  root@Ubuntu:~# dmesg | grep-i mpt
  [12313.810414] base of MPT fusion driver 3.04.07
  [12313.816546] device (ioctl) misc 3.04.07 MPT fusion driver
  mptctl [12313.816741]: registered with the base Fusion MPT driver
  mptctl [12313.816748]: / dev/mptctl @ (major, minor = 10, 220)

  QUESTION:

  
  Does anyone know how to set up the remaining part of the DELL OMSA so PERC appears in the GU or OMREPORT?

  Also, I want to update the FIRMWARE, it'll be ok [I can load Windows XP Mini to run this task]

  FW UPDATE: http://alturl.com/nnob8

  Thank you

  -Hiphoptech

  Are just want to monitor the Raid or you try to do something else? You can try software raid lsi and see if it works. http://www.LSI.com/support/pages/download-results.aspx?component=storage+component&productfamily=legacy+RAID+controllers&ProductCode=P00278&assettype=0&ProductName=MegaRAID+SCSI+320-4x+ (531)

  Or this http://sourceforge.net/projects/megactl tool

  With it is not a validated OS, it is not possible so that it can work properly.

• Server Dell OMSA?

  How can I know which version of dell OMSA to install on it?

  Go to support.dell.com, navigate to your model, select your operating system, then go to the management systems of the node managed the OMSA.

  If you need additional help, let us know what system and what operating system you have.

• Blue Screen of Death Dell PC error Code 650F137B

  Hello

  Recently I was make a noise from my PC to start up, and then all of a sudden now I have a blue screen with the error code 650F137B that the same thing happens

  When I try to start in safe mode, fortunately I backed up my data before that happens, it's a Dell Dimension 5150. I would appreciate some help with this please

  Gerry

  You are welcome.

• Reference Dell OMSA - does not work after the installation of KB3161608

  I recently installed the last batch (June 2016) the MS updates on our servers.  It went well with the exception of two servers, both running Server 2008R2 and a PE2970, a PE2950.  These are our only two servers running server 2008R2.  On both machines, after installing all the updates, I was unable to open OMSA.  The browser will display "Internet Explorer cannot display the webpage".  OMSA continued to work properly on the rest of our servers, which are almost server 2008.

  I tried another browser, but that has not worked.  OMSA reached 7.3, so I downloaded and installed 7.4.0 and the 7.4.0.2 updated.  I found references to similar online, and some of the install OMSA fixes problems using the prompt, or "runas admin".  I installed them all over the place, but no matter how I installed it, I got the same result!

  I've not found errors in the event logs of the server.

  So I started uninstalling updates until I found the one who broke it, and it was KB3161608.  Uninstall this update fixed OMSA on both servers.

  This updates is listed as optional, so I'm not sweating it for now.  I believe that this is a certificate problem and could be fixed by creating a new self-signed server certificate, but this isn't really my area of expertise.  But I wanted to put this out there in case it might help someone else.

  In my tests, you should communicate the updates installed then OMSA will not work.

  KO 3161608

  KO 3172605

  KO 3172614

• Dell Outlet - error when you try to buy!

  Hi all

  Hope everything goes well.

  Still and always tried to buy a XPS15 out of Dell however continually get the error message:

  The system was not able to process your request. Please try again, and if this error occurs again, you can reach us at the [email protected]

  Anyone experienced this?

  Thanks in advance!

  Hi Arilus,

  Thanks for posting!

  By checking the site USA Dell Factory Outlet, there seems to be only 3 XPS 15 is available.  On thousands of people trying to order, it is possible that you tried to buy is entered by someone else before you touch "confirm".

  If you are still experiencing difficulties, and sending an email to [email protected] does not work for you, please contact me private and I'll see what can be done to help.

  Kind regards
  Robert

• Reference Dell 2150Cn-error code 016-302

  I have dell 2150cn. Error code 016-302

  I restarted the printer, removed cable eth printer.

  I can print from USB connection, but once I connect the printer to the network, printer spits out error 016-302 code.

  I've updated to firmware lasted, do not know what else to do

  Does anyone have any help?

  Thank you

  Hi Gravydog88,

  Please follow all instructions carefully and print test pages, as requested. Keep us informed of the results.

  Thanks & best regards,
  Babita S
  #iworkforDell
  To learn more about Dell Product Support, drivers & downloads, order & Dispatch status-> choose your region->
  AMERICAN customers ; Clients of the United Kingdom ; Visitors to the India . For video Dell technical support click on here

• Dell 1355cn error code: 077-900

  Dear Dell community members-

  I hope that much someone may be able to help others?

  I try to erase the error code: 077-900 open rear cover remove the paper jam.

  This error message has remained after a jam last. I'm fairly certain that there is no fragment left after removing the room - though; I'm not sure how I should go actually on removing the toner/drum unit and make sure that this is the case? and if this does not clear the error: the best way to proceed in this scene?

  I perform diagnostics recommended as suggested by a well-respected former opinions of this site - be:

  "To test the recording sensor, you switch to customer on the printer diagnostic mode.

  To do this:

  1. turn the printer off 2. Hold down the UP and DN keys while turning on the printer; the buttons can be released when the screen LCD indicates "diagnosis." 3 LCD should indicate "Client Mode" and "ESS Diag" (or something similar). 4. press on the arrow of DN to display "IOT Diag". Press the button ENTER. 5 LCD should indicate "IOT Diag" and "Digital Input"; Press the button ENTER. 6. press on TOP / DN buttons until the desired DI - xx is displayed, then press ENTER button to run the test. The test we want to execute is the Regi-sensor test - DI-3. Press the arrow upward until the LCD shows "DI - 3 OFF" then press enter. The LCD display should now show "DI - 3 L 0". »

  The result indicates: "DI - 3 L 0".

  I tried to remove the toner cartridges and cleaning of the stem.

  I tried a hard reset of the printer.

  I was not able to determine where the registration sensor is located and where the paper enters the area of sensor?

  If possible: a picture of what I should look for is beyond awesome! I'm a complete newbie to this! [And it is true that: WAY out OF MY LEAGUE HERE & SCARED TO DEATH!]

  I was able to read the appointments that you might: ' toggle the positioner regi-sensor and get the display to change from L to H and L, continuous, then you have cleared the jam. " The number will be incremented indicating how many times you have cycled the positioner. If you need to access this area, remove the carts of Toner/Drum and set aside. »

  It's something I'm still trying as I am unconscious on how to remove the Toner/Drum basket... [The supplied images then now are no longer available via the... related links]

  Any advice would be deeply appreciated!

  A friend has managed to fix the problem. Being that this code is usually caused by a paper jam previous [we managed to clear the jam manually.]

  The steps we took to do this were very similar to those described here: http://www.wikihow.com/Clear-a-Paper-Jam

  We have carefully erased the clear paper jam and did our best to make sure that it has not left the small pieces of paper in the printer.

  [Should your question the necessitate to go ANYWHERE near the unit with a screwdriver?] I CAN'T STRESS THE IMPORTANCE OF ENSURING THAT THE LATTER IS EQUIPPED WITH A MAGNETIC HEAD!]

  What has been discovered after a LOT of FRUSTRATION that has been: the error will remain until the printer is reset. The button should be pressed to clear the error, and then try printing was attempted again. From there: we were good to go.

  I hope get you the same result.

• Reference Dell OMSA Release Date for vSphere 6.0 ViB

  Hello

  information about the release dates for vib for vSphere vsphere 6 (OMSA 7.4.1 / 8.0.1 / 8.0.2)

  Apart from that... OMSA 8 will continue in two different development branches for T630, R630, R730, R730xd and T430/R430/T530/R530/M630... or will it be a next single version for all serversystems of 13 G.

  Kind regards

  Torsten

  Toki76,

  Custom Dell ESXi ISO 6.0 came out 2 days ago. So I guess, from past experience, that the VIB is going to be released very soon behind him, but at the moment I do not see that he launched. I can research to see if I can refine the delivery date well and let you know.

  What about OMSA 8, probably a single version which includes the two branches.