CFCHART always displays Developer Edition after upgrade

Similar Questions

• Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

  Hey all,.

  I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very hot unless a cooling pad was used (which I it comes with). At the time, it was running Windows 7 Home Premium with no problems and everything was fine. However, it might be interesting to note that while I had it I had problems with random blue screens while I was with the latest graphics drivers, so I drove back to the drivers supplied on the support page for this laptop. After I "upgraded" to Windows 10 (do not perform a clean install) for my dad, the laptop would randomly crash and display something like the photo that I have attached, before going empty and show again several times. Believing that it would be a problem with the GPU, I went and Display Driver Uninstaller to remove completely all AMD drivers and software, downloaded the latest driver on the AMD website and installed. It seemed to temporarily solve the problem, but as it's always within 30 days of installation, I offered to go back to Windows 7, but my father wanted to leave it and see how it happened. Oddly enough, for the next month, it never reported the laptop crashing again and the time period for return finally expired. The problem of course back then I tried the same solution from before but the noise continued. I tried to disable the GPU completely from the Device Manager, so that the laptop was running with Microsoft Basic display adapter. He seems to have stopped the fracas, but less than a week my father told me that he had crashed again.  I tried to restore the laptop to a system image I had done years ago, but I learned that you cannot restore an image to a different version of Windows System. Finally, as a last resort I backed everything up and made a real clean install of Windows 10, and the problem has not yet disappear.

  My goal now is to return the Windows 7 laptop somehow. I can mount a virtual image of the system hard drive and access all the recovery files provided by HP, specifically the Recovery Manager. From there, I can do a recovery USB or DVD (s) we hope to restore the laptop to all conditions of factory (so theoretically return to Windows 7). I will try this, but I need a flash player more than 20 GB or several blank DVDs I don't currently. In addition, Recovery Manager says that this medium can never be created once, so it save me time and money (not to mention my last lifeline) if someone could please share their views on the question of whether this method would be successful or not. I know in case it doesn't work, there is always the question of registration of the OS by Microsoft, but I can cross that bridge when I get to it.

  Sorry for the essay I just wrote, but this has been a problem for too long, and I am at a loss to know what to do now (apart from the purchase of another computer). If there are any questions I'll be happy to answer, and I hope we can get this issue is resolved. See you soon.

  

  If you follow this step 3.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

  You will need to select "format and repartition disks" as windows 10 will have changed partitions.

• Contacts slows to a crawl when creating or editing after upgrade to Yosemite of Mavericks

  Updated (3) days of Mavericks 10.9.5 in Yosemite 10.10.5. Today, trying to create or edit contacts is excruciatingly slow.

  N.B.: I DON'T store my Contacts in iCloud. All contacts are stored on my 17 mid-2010 "MacBook Pro. I don't use icloud drive.

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• Does not display Image webcam after upgrade to XP PROFESSIONAL

  
  

  I called and spoke with the technical support of Lenovo. After the restoration of the original image of the XP Home Edition system, the camera still does not work and Lenovo technology composed in my computer to confirm that it is a faulty webcam. I'll post an update on my tech support experience in a short time (in the main forum).

  John in Indiana

• BlackBerry Z10 Display zoomed out after upgrade

  After the 10.3.2.2226 on Z10, after each unlock phone show zoomed out and needs to adjust every time. fed up with this horse

  Hi @SPJam

  Thanks for reaching out!

  I think that you are experiencing the problem that is described in the following KB.

  Can you give a look and let me know if the resolution has helped you? Thank you!

  KB36773 The display appears zoomed or magnified after 10 BlackBerry OS version 10.3.1 update a...

• Difficulties to display video content after upgrade

  I can not view all content on the video section of CNBC after their website updated its reader. It's strange because I can see it on my Mac and my PC at work using Windows XP. The computer with that I have a problem is a portable PC under XP SP2.
  I'm running the latest version of Flash. Any idea what's going on?
  This was bugs me for some time so if anyone can help, please do.

  He finally got!
  So here, for those of you who run blocker virus/spy, disable your adblocker!
  I use Spy Sweeper and I went to 'Network' and disable 'Common Ad Sites' under Network Shields.

  These 3rd party software will not your browser display some ads on your browsers no matter how you configure.

  I hope this help some of you.

• [XPS 15 9550] Display stops flashing after upgrade to Ubuntu 16.04

  I have recently moved from windows to Ubuntu and I installed Ubuntu 16.04 on my new Dell xps 15 9550 laptop. Everything works perfectly except the display. It keeps flickering. Maybe the problem is with the NVIDIA graphics.  Someone will be able to help me with this problem. Thank you

  

  I managed to solve this problem by improving my kernal to 4.5.0 :)

• Why a sql statement has become slow after upgrade to 11g database

  Hello
  
  My previous version of the database is 9I and any sql statement are well-developed.
  but after upgrading to 11g database, a sql statement become slowly.
  
  My senior dba friend told me there are a few different calculating methods from 9i to 11g.
  is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
  
  Sean

  The administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
  http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366

  And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.

  HTH
  Aman...

• After scanning, save as dialog box is always displayed.

  Hello! I use windows 7. Having installed Adobe Acrobat pro DC. Installed all updates after the scanning, the backup that dialogue is not always displayed. What should do?

  Edit > Preferences

• Buttons development missing the bottom screen after upgrade to apex 4.2.2

  Hello
  
  Emergency!
  
  After upgrading my apex-environment 4.1 to 4.2, everything seems to work properly.
  But once the connection as a developer, I don't see my development at the bottom of the screen buttons.
  
  Indicates the State of the Application Properties "available with edit links" and the status of the build is "run and build the application.
  
  What I'm missing here?
  
  Reg,
  Chris
  
  Published by: 1004327 on 6-mei-2013 07:39

  Hi Chris,

  you might have run into the bug #16769040. I already asked David Peake to update the 4.2.2 known issues with an explanation. In short, install the patch group may lead to an inconsistency with an instance parameter (INSTANCE_ID) and cookies from generator, which translates into a missing Developer toolbar. If this is the problem on your instance, it can be corrected by running (as a SYS):

  begin
      apex_040200.wwv_flow_security.set_internal_cookie_name;
      commit;
  end;
  /
  

  Kind regards
  Christian

• Edited in Photoshop does not correctly display in Lightroom after recording the images

  Hello

  I recvently EU cloud Adobe and upgraded from Lightroom 3 or 4.  Since the upgrade I had problems with Lightroom not correctly display images edited in Photoshop.  Instead of the photoshop image, it creates a new jpeg image and appears in the library.  the PSD is not loaded into the library.

  I take a jpeg image of my library and shoosing the change based on Photoshop.  By selecting Edit a copy, I'm tried with the original and edit a copy with lightroom adjustments as well as with the same results.

  In Photoshop, I duplicate the base layer, the image upscaling, running some filters, addition of volunteering adjustment layers.

  I save the image in Photoshop format in the original folder where the original jpeg was in the Lightroom library.  I record with maximize compatibility on.

  When I return to Lightroom, the catalog displays the two files, the original jpeg and a copy identical to it, NOT the new file in photoshop with alterations.  If I go in the folder images occupy in the Finder using the Finder command show two images link to the same original jpeg format.  The modified file to photoshop is there in the folder but does not appear in Lightroom unless I drag and drop it.

  I've disabled all the filters and ensured that the sort is sort by name.  The image does not automatically appears in Lightroom after mounting.  Any suggestions?

  Thanks for any help!

  PS. I'm not looking for the subject, and there are discussions since 2007 and lightroom 2 but their solution was to start from scratch basically and I have a carefully labeled, starred and labeled catalog of more than 30 000 images and really don't want to do that

  Images that are edited in Photoshop will be displayed automatically in Lr only when the image file saved in Photoshop is identical to open LR.

  You say you open a jpg of Lr, then edit in PS-among other things-adding a few layers. Layers are not supported in JPG format, so you must either save it as a psd or a copy in jpg.

  In both cases, is not the same image as the one opened in Lr file, so it will have to be imported into Lr appears. If flatten you your image after editing in PS and then do a to your JPG - not a - it will be displayed in Lr.

  PS: the only exception is when you open a raw image from Lr into PS and you save it to PS in the format of file specified in Lr for external mounting. The saved file is automatically displayed in LR.

  Post edited by: web-Weaver; PS added

• editing photos after upgrade to iOS 9.2 cannot be saved

  After upgrading my iPhone 6 iOS 9.2, photos edited in the Photos App are not saved. After pressing 'done', the picture changes to the original. Urgent pictured again and on Edit, shows a 'Reset' button, but that's all that's changed

  A forced reboot did not remedy the problem.

  Fortunately the loading USB cable works again.

  What a waste product. Same problem here...

• Error: File Asms needed Windows XP Home edition after repair of operating system. (Windows 7 upgrade)

  Original title: asms file necessary windows xp home edition, after operating system repair.

  I know it's old but I try to get on my mothers pc so it can transfer files to a drive hard usb. This computer had virus in there and caused certain files be rearranged. I took out the virus

  I could not access the Device Manager as he disappeared. The computer does not recognize the hard drive usb, so I decided to fix the pc using the re installation disc.

  The computer fixed itself, but now I get this message saying file asms is necessary. I tried to use the steps in this article (311755 KB), but still the same problem. I would like to use the recovery console, but I do not know the password for the administrator of safe mode.

  The computer that had repaired the operating system is a dell dimension 2350 and I used the original windows xp disc.

  I have a disc of windows 7 but the graphics card on the computer is less than adequate. I was wondering if I could calm down the graphics in the windows Classic theme for windows 7 will work and is it possible to save files because the computer is always on the xp Setup

  Your specifications (RAM) are not quite the minimum requirements for WIndows 7 as shown here:

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  However, Microsoft recommends 128 MB of RAM for XP as shown here:

  http://support.Microsoft.com/kb/314865

  So I think that their minimum requirements are a lot of hooey for most environments.  He can run, but you're probably not going to it.

  If you want to see if you can get your work in XP (I'm not familiar with this problem), if you do a little research on Google for phrases like claire XP administrator password, I forgot XP administrator password reset XP administrator password, etc.. I'm pretty confident that you will find a way to go beyond this little bump on the road.  Simply clear the password and be on your way.

  We are supposed to simply not to tell you how to do such things, so I fall just a few tips :)

• Upgrade to standard developer edition with license valid

  Hello

  We have a developer set-up that is configured exactly as we want. We now just bought a license for Coldfusion Standard, but I can't seem to find how we can 'upgrade' our developer edition to the Standard version?

  Do we need to uninstall and reinstall? If so, how can we safely save all our settings (data sources, mail config, locations, journal...) and import them in the newly installed Coldfusion?

  We prefer to simply 'upgrade' our edition developer to keep all our settings, such as which would simplify things.

  Kind regards

  M.

  

  --

  Adam

• How can I tell SQL Developer to always display the datetime values in its entirety?

  It's really annoying. Developer SQL displays only the date part of datetime variables. Good, if I preface every query with 'ALTER SESSION SET NLS_DATE_FORMAT = "DD-MON-YYYY HH24:MI:SS";', it will force the datetime value to display, but that it a nuisance!
  
  How can we make SQL Developer ALWAYS display the full datetime value?

  SQLDeveloper it will display Date + 12:00:00 AM (depending on the format you chose). You will get no error. I published an article on this with screenshots, in my blog. If you are interested, you can read [here: | http://srinisboulevard.blogspot.com/2010/05/date-display-in-oraclesqldeveloper.html]

  HTH
  -rsrini