Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

Hey all,.

I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very hot unless a cooling pad was used (which I it comes with). At the time, it was running Windows 7 Home Premium with no problems and everything was fine. However, it might be interesting to note that while I had it I had problems with random blue screens while I was with the latest graphics drivers, so I drove back to the drivers supplied on the support page for this laptop. After I "upgraded" to Windows 10 (do not perform a clean install) for my dad, the laptop would randomly crash and display something like the photo that I have attached, before going empty and show again several times. Believing that it would be a problem with the GPU, I went and Display Driver Uninstaller to remove completely all AMD drivers and software, downloaded the latest driver on the AMD website and installed. It seemed to temporarily solve the problem, but as it's always within 30 days of installation, I offered to go back to Windows 7, but my father wanted to leave it and see how it happened. Oddly enough, for the next month, it never reported the laptop crashing again and the time period for return finally expired. The problem of course back then I tried the same solution from before but the noise continued. I tried to disable the GPU completely from the Device Manager, so that the laptop was running with Microsoft Basic display adapter. He seems to have stopped the fracas, but less than a week my father told me that he had crashed again.  I tried to restore the laptop to a system image I had done years ago, but I learned that you cannot restore an image to a different version of Windows System. Finally, as a last resort I backed everything up and made a real clean install of Windows 10, and the problem has not yet disappear.

My goal now is to return the Windows 7 laptop somehow. I can mount a virtual image of the system hard drive and access all the recovery files provided by HP, specifically the Recovery Manager. From there, I can do a recovery USB or DVD (s) we hope to restore the laptop to all conditions of factory (so theoretically return to Windows 7). I will try this, but I need a flash player more than 20 GB or several blank DVDs I don't currently. In addition, Recovery Manager says that this medium can never be created once, so it save me time and money (not to mention my last lifeline) if someone could please share their views on the question of whether this method would be successful or not. I know in case it doesn't work, there is always the question of registration of the OS by Microsoft, but I can cross that bridge when I get to it.

Sorry for the essay I just wrote, but this has been a problem for too long, and I am at a loss to know what to do now (apart from the purchase of another computer). If there are any questions I'll be happy to answer, and I hope we can get this issue is resolved. See you soon.

If you follow this step 3.

http://www.SevenForums.com/tutorials/675-system-image-recovery.html

You will need to select "format and repartition disks" as windows 10 will have changed partitions.

Tags: Notebooks

Similar Questions

  • Pavilion dv6: fingerprint reader not working after update to Windows 10

    Hello

    Recently, after the update to Windows 10 fingerprint reader works just on my Pavilion dv6. I tried other methods I found on the forum, and I'm looking for a driver get the fingerprinter reader to work. I tried to download HP SimplePass (which has been removed from my PC by updating the operating system) in the hope he would get my fingerprint reader to work, but no luck.  I also looked in the settings (in Device Manager) for biomeric devices, and I found a driver with an exclamation point, indicating it wouldn't work. So, right now, I need a solution to get my to work on a fingerprint reader.

    Thank you

    Nathalie

    Hello @Nikil1503,

    I don't know that if you follow exactly the documents there will be no problems. It will be a good learning experience!

    After the return to let me and the community to know how it goes.

    You're welcome, have a great day!

  • Hard drive crashed after upgrade to Windows 10 Windows 7

    * Original title: HARD drive Crash / Win7 for 10 Upgrade... bad timing!

    I have a PC running OEM Win7 x 64... just did the free update to Win10 a few days ago. HARD drive just crashed hard. I did an ISO when I upgraded to Win10. I'm trying now reinstall on another HARD drive... and no matter if I use Win7 OEM drive or ISO Win10 disc, it tells me that the activation code is invalid. I was under the impression that, as long as the mobo (and everything else except the HARD disk) is the same, Windows will allow you to reinstall with the key?

    Any help is greatly appreciated!

    Scott

    After the upgrade to Windows 10, you cannot use your Windows 7 or Windows 8/8.1 product key.

    Click on this Later.

    Continue to use the chat support instructions

  • Pavilion dv7: Wireless does not work after upgrade to Windows 10

    After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

    This feature worked perfectly in Windows 7

    No worries.

    Thanks for the actual name of the product from your laptop.

    Let me take a look.

    I will edit this thread to let you know what I found.

    The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

    https://communities.Intel.com/thread/59710?start=0 & tstart = 0

    You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

    I saw them on eBay for @ $20.00 USD

    http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681

  • HP DV6-1240eo problem: "Volumebuttons" lost after upgrade to Windows 7

    Hello

    I have a problem since I factoryresetted my HP DV6-1240eo. It's original is Windows Vista, so first I installed as first of the factory (after the factory reset) and then used the HP disks for a Windows 7 upgrade.

    Everything I did to get rid of a bunch of * beep * which makes the computer slower.

    At the moment I can't use these buttons that I took a photo of (the volume bar and mute button, on the left. Symbol wireless works), because I don't really know what they are called or how I managed to get them back to work with Windows 7. They worked before the factory reset, so it's a complete mystery, why they do not work now.

    Any suggestions?

    Install the software the HP Quicklaunch supports the server.

  • Random BSOD after upgrade to Windows 7 for Win Vista

    Hello

    I am getting random BSOD, system crashes etc... After that I updated to windows vista.

    It is not a custom built PC, but I checked the inside of the box

    Plug-

    Intel Core2Duo

    4 GB of Ram

    1 TB HARD DRIVE

    NVIDIA Gt 140

    (Big one) memory dump

    http://1drv.Ms/1pIf5US

    OM

    All first please change your control panel of the system to small (lernel) DMP.  It will save you a ton of time when you transfer files DMP.  You can read how in this wiki

    This accident was related to the corruption of memory, please run the Driver Verifier to find the underlying cause.

    These accidents were related to the corruption of memory (probably caused by McAfee).

    Please run these tests to check your memory and find which driver is causing the problem.


    If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

    Since then, it is more likely to be a pilot run everything first.
    1-Driver Verifier (for full instructions, see our wiki here)

    If the auditor does not have the issue we move to it.

    2-Memtest. (You can learn more about running memtest here)


    If you cannot start after you have enabled the auditor reboot in safe mode
    In Vista & win 7 (F8)

    Co-written by JMH3143

    .

  • Pavilion 17 e020us: no internet connection after upgrading to Windows 10

    Hello guys,.

    I have a problem with the internet connection.

    My computer started to upgrate by itself for 10 windows while I did other work at my home. I was waiting until he finished.

    When it's done I realized that I have no internet, not only my wireless, but each of them, because I have a free to use wireless

    So, I start google how can I correct this situation. I did all the tasks that windows offer, typed the commands at the prompt command, installed the drivers, typed commands for dns, deleted cookies, rebooted my computer after I have finished the task and my internet still doesn't work...

    In the browser window, I use chrome and internet explorer, it says:

    "This site is not reachable.

    YouTube.com address DNS server is not found.

    DNS_PROBE_FINISHED_BAD_CONFIG ".

    As I said I typed the commands at the command prompt to DNS and delete cookies and it did not work.

    Please, help me to solve this problem with my computer and the internet.

    I'll be very happy)

    I have an e020us windows, 64 GB, laptop HP Pavilion 17 10.

    Hello:

    There are W10 drivers for the wireless card that your laptop model.

    This is the latest available driver...

    This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74843.exe

    If the wired network adapter is not no longer works, see if the ethernet W10 driver works for you...

    This package provides the driver for the Ethernet Realtek controller in portable models supported and operating systems.

    FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72934.exe

  • Pavilion DV6-2010sf: HP Pavilion DV6 Sound no longer works after Windows upgrade Windows 7 10

    After upgrade to Windows 7, no noise, even with icons on the screen at the bottom left and keyboard sound ON display.

    ATI driver high definition Audio Device was running OK.

    Audio CODEC IDT High definition driver was NOT working and unable to do so.

    I ran Windows Update but who has installed a new version of the drivers and Audio CODEC IDT High definition driver now works OK, still no sound even with icons indicating it is under tension.

    The HPSupportSolutionsFramework of the HP utility that is supposed to help can be downloaded: 10 seconds after download starts, it will stop ith error notification (and no explanation).

    Any help welcome.

    Hi @JFR77,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and no sound after a updated Windows 10. I uninstall that I listed in the audio, video and game controllers first and reboot the laptop. Then download the driver Audio IDT high definition (HD).

    You can try:

    1. a click right icon "speaker" (right)
    2. Select playback device
    3. click right speakers
    4 activate and as default
    5. click apply/OK

    Here is a link to troubleshoot the sound.

    Please let me know how it goes.

    Thank you.

  • Wireless button not work (orange rest) after upgradation from windows 8

    the orange wifi light does not change to white light after upgrade to windows 8 windows edition OS Home premium. I don't use the pavilion dv6-7011tx laptop, my product. is. B0P39PA #ACJ this is very frustrating as theres no wifi as well as bluetooth connectivity, the solution button wireless key doesn't help. HP guys please give a solution that we expect more than a month.

    If you open Device Manager (key Windows + X and select Device Manager) and see an unknown device with the following details as in the picture.  I had the same bad experience when I upgraded my Hp Envy17-3002ea loan last weekend.

    then download and install sp59720 should do the trick.

    Best regards

    ERICO

  • 700 - 230qe envy: after upgrade to Windows 10, I have no sound

    I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

    @gemini2

    Try this.

    1. Select the CODEC Audio IDT high definition in Device Manager.
    2. Select the driver tab.
    3. Click on update driver... button.
    4. -> Select Browse my computer for driver software.
    5. Select-> Let pick me from a list of drivers for devices on my computer.
    6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

    REO

  • HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

    Hello

    2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

    Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

    After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

    If at the moment I use some default driver I guess.

    In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

    I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

    I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

    All solutions? All the newspapers that I can get to help you help me ?

    Kind regards

    Jakub Krol.

    Hello

    In case anyone is interested, my PC is now fixed

    More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

    Kind regards

    JK.

  • No CD/DVD drive after upgrade of Windows 8 on Satellite Pro S300L

    The cd Rom drive no longer works after upgrade to Windows 8.
    The drive is not displayed in the Solution Explorer, either. It is mentioned: error in the register.

    I can not change the right driver in Device Manager - probably it was deleted.
    Is the driver of the * MATHSITA DVD-RAM UJ880AS drive * for Windows 8 available?

    How can I make my cd Rom drive working again?
    How can I fix the error?

    Could guide you me in registry change (upper and lower filters) if necessary?

    Post edited by: GRIX

    Hello

    Check please follow thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68988

    Here, you can find the solution to your problem.

  • Second monitor is not detected after upgrade to Windows 10

    After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

    I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

  • Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

    Hi all

    Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

    His output HDMI for my Sony LED used previously to work properly.

    But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

    I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

    Thank you.

    I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

    To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

  • Unknown device after upgrade from windows 7 to windows 8

    My laptop is a Pavilion m7 1015dx

    I just upgraded to windows 7 to windows 8 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.

    The hardware Id are:

    ACPI\VEN_HPQ & DEV_6001
    ACPI\HPQ6001
    * HPQ6001

    I don't know what it is or a driver for it.

    No matter who else knows it or know what this device and where I can get a driver for it.

    Much appreciated!

    Hey thought I'd tell someone on the Microsoft Answers site found the driver. It is the wireless button driver.

    Here is a link for the driver:

    http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe

    Here is a link to the MS Answers:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/unknown-device-after-upgrading-to-Windows-8/e46bfb7a-70cb-42be-B21C-9b6688b68009?page=4&TM=1351432666168#LastReply

    Thanks for your help.

Maybe you are looking for