Similar Questions

• What is the problem with my Application.cfc file

  I decided to convert an old application Application.cfm to Application.cfc, doing mostly because I want to use onRequestStart and other, and I can't initialize in Application.cfm.

  But for some reason, this Application.cfc file causes my pages to come in white.  I can't for the life of understand me why, since it is copied from an application that works perfectly well.

  < cfproperty >

  < cfset myIdName = "myapp" >

  < cfset this.sessionManagement = true >

  < cfset this.sessionTimeout = CreateTimeSpan (0,2,0,0) >

  < cfset this.loginStorage = "session" >

  < cfset this.scriptProtect = true >

  < cfset this.setclientcookies = false >

  < cffunction name = "SystemFramework" >

  < cfset application.dsource = "mydsn" >

  < cfset application.appid = "123456" >

  < cfset application.appname = 'myappname' >

  < / cffunction >

  < cffunction name = "onSessionStart" >

  < name = "cfparam session.trackingno' default '0' = >"

  < name = "cfparam session.emailaddr" default = "" > "

  < name = "cfparam session.newitem" default = "1" > "

  < name = "cfparam session.authserver" default = "" > "

  < name = "session.id cfparam" default = "" > "

  < name = "cfparam session.rights" default = "" > "

  < name = "session.userid cfparam" default = "" > "

  < name = "cfparam session.sauth" default = "" > "

  < name = "cfparam session.creds" default = "" > "

  < / cffunction >

  < cffunction = "onRequest" output name = "true" >

  "< cfinclude template="/planning/application.cfm ">

  "< cfinclude template="/planning/tpea/2015/validate.cfm ">

  < / cffunction >

  < / cfproperty >

  What have I done wrong?

  It comes in two models that you include in your function onRequest()?  They give really any content?

  You don't have the requested page being included.  You must add an argument to the upper part of the function to receive the requested page:

  Then you must add another to include this page:

  You will have to figure out if this includes should come before or after your existing includes.

  -Carl V.

• Application.CFC put in cache.

  Jin
  I wrote on another post on this forum about my new project deployment, I have another problem with my Application.CFC in my project, I share a few global variables and paths of the document in the application through Application.cfc variables. but the problem is I fell by mistake the project with my settings the that is not valid on the server, then the adjustment obtained those cached on the server. Today, I downloaded the correct with the correct settings Application.cfc it runs always on the previous incorrect settings... What can I do about it, same thing happen on my local dev server but when I restart my console services CF service, new changes get made immediately my live server is running on the Linux Apache server.
  

  OK Azadi, maybe I was too came out and didn't see your post b4 I post my comments... your solution worked... Nice... but for some reason, your code did not work as it is... He complained that onApplicationStart(); is not defined, so I made a small tweak for your code...

  Quote:
  
  App = CreateObject ('component', 'Application');
  App.onApplicationStart ();
  
  

• Strange problem of Application.cfc included

  It's hard to explain, so I hope this has meaning. Here goes...

  I have an Application.cfc in the root of my site that defines some variables.  I then an Application.cfc in each subdirectory (call each of these subdirectories a site) that includes the root Applicaiton.cfc.  I have also one includes the folder located in the root directory that I use in each site for pages that I shoot using the tag cfinclude referring to variables defined in the root Application.cfc and Application.cfc site.  For some reason if I touched the page in includes it the directory directly everything seems to work very well.  I can then shuts down for the pages of different site that use cfinclude to pull in files in the directory, and that works very well also.  However, if back us the next day and do not go directly to the page in the directory first and just go to one of the pages that pulls in the include files, we get an error saying that the variables in the root Application.cfc was not found.  I don't know where to start trying to debug this?

  This is all the code of the root Application.cfc less other variables:

  < cfproperty output = "false" >
  
  <!-name of the application, must be unique-->
  < cfset myIdName = "openenrollment" >
  
  <!--> run before the request is processed
  < cffunction name = "onRequestStart" returnType = exit "boolean" = "false" >
  < cfargument = 'page' type name = "string" required = "true" >
  < cfset APPLICATION.memberDisease = True >
  < cfreturn true >
  < / cffunction >

  < / cfproperty >

  This is all the code of one of the files of the site Application.cfc less other variables:

  < cfproperty output = "false" extends = "oe. Application">
  
  <!--> run before the request is processed
  < cffunction name = "onRequestStart" returnType = exit "boolean" = "false" >
  < cfargument = 'page' type name = "string" required = "true" >
  < cfset APPLICATION.group = "demo" >
  < cfreturn true >
  < / cffunction >

  < / cfproperty >

  The root of this site is in fact a subdirectory named oe that is located in the root of the large site, so the root Application.cfc file lives in the /oe directory.  Understand that are in the/oe/includes directory and in the example above the file Application.cfc is in the directory/demo/oe /.

  I'm new to this kind of things of cfc, so any help is GREATLY appreciated.

  Thank you!

  Holli

  You're right, it's complicated.

  With a single pass through your explanation, my first theory is that the in the root of your Application.cfc OnRequestStart does not work.

  Since you have an OnRequestStart function in the Sub Application.cfc file, it replaces the OnRequestStart in the base file.  Both do not work.

  But when you run a file directly in the directory includes, this file does not use a sub Application.cfc file so it does work the Basic Application.cfc file and so this function OnRequestStart() is used.

  IF this theory is true, the solution would be to call the OnRequestStart() function parent, starting with the child OnRequestStart function.

  That would probably look like this.

• What executed Application.cfc?

  I'm working on a clients system that has a library of CFC in a folder called/Admin/cfcs.   Inside this folder is an Application.cfc file.

  There is also an Application.cfc file in the root directory.  Other folders as well as in the Admin folder are out of the root directory.

  When I run the model /Members/Index.cfm executed some of the methods of the SWC library.

  If they are not all calls to the library of CFCS that I'm 100% sure the Application.cfc in the root folder is run when I run one of the templates in any folder on the root folder.

  My question is that if a pattern such as/Members/Index.cfm, calls a method of the CFC library is the Application.cfc model in the folder/Admin/cfcs executed or is the root Application.cfc that executed.

  I think it's just the one root, but I'm not 100% sure.

  Any thoughts?  Have an Application.cfc in the library folder causes problems?

  Thanks in advance for the help!

  Your assumption is correct.  The application.cfc in/Admin/cfc is not running at all, unless there is a .cfm file that is somehow used.  The CF Server first searches the document .cfm file current application.cfc/cfm; If he does not, she keeps looking for records lower and lower until he finds an application.cfc/cfm and runs it recursively.  CFCS in a file with an application.cfc/cfm does not run another application.cfc/cfm; they rely on one that was already executed before loading the requested .cfm file.

  HTH,

  ^_^

• Question from newb on Application.cfc vs .cfm

  Sorry for the newb question total which is probably covered a bazillion times, but I have some difficulty to get things to work.  I know this, because I got the CF9 advanced training, but when you have 60,000 pages worth of content back to the office waiting to be converted into a new design, there is not much time to practice what you have learned in class .

  A lot of my Office Web site is rest when we were running CF 6.1, so what use the Application.cfm files.  Now that we have run CF8 (and could soon move to something even more recently), I would get everything upgraded, including obtaining my Application.cfm stuff in an Application.cfc file.  One of the reasons why I want to do this is because I have a few apps I want to use the OnRequestStart() methods for.

  My problem comes from the fact that our Application.cfm file done many things such as global variables, queries, and other things that I can't get to work within an Application.cfc file.  Particularly strange is the fact that I've recently implemented a CF10 site to the Web sites of the company of my wife and got done Application.cfc work without much trouble, leading me to suspect a problem installing with my office.

  I tried following the guide on the Hostek forum, but nothing helped.  I can't include the content of our old Application.cfm file in the new cfc.

  Any tips?

  BreakawayPaul wrote:

  If you want these variables (included in the Application.cfc) is available to each requested page, then you must store them in the scope of the request instead.

• Application.CFC and the directory mapping

  Hello

  We have a request that we would like to migrate to use Application.cfm to Application.cfc. It is a management application that is implemented on various websites (hosting us) with an "app directory" which is defined as a virtual site directory, with a few variables specific to the site (mostly just a couple of unique customer ID) located in an XML file at the root of each site definition offshore. In other words:

  www.site1.com is customer web app and /configfolder/appvars.xml

  www.site2.org is the same web application for client B and /configfolder/appvars.xml

  The actual application is a virtual directory, say:

  www.site1.com/Mgmt/

  www.site2.org/Mgmt/

  The /mgmt/ folder contains all the real application code - the only thing the root directories do is to hold the handle of the client-specific variables.

  "Historically, what we have done is to have an Application.cfm file in the app folder make a /mgmt/ < cfinclude template ="... / Application.cfm "> so that the same code runs for all sites, but tire of the credentials of the unique site of the folder parent site." But Application.cfm is a bit long in the tooth.

  The problem is that the server does not appear to 'find' the Application.cfc in the parent folder and I'm not sure, there is an equivalent ' cfinclude the file of a directory to the high "(sauf si vous pouvez cfinclude un CFC, dont je ne pense pas que vous pouvez le faire?)."extends"won't be not cut either because we would define a mapping to the top and know what specific Application.cfc" , we will expand when the only thing we know is that the data that we want to be in / configfolder /.

  The only solution I can think of is to use a single Application.cfc and put it in / mgmt /, transfer our customer-specific variables in the XML file, that we read in via cffile to a CF page that can be included in the Application.cfc (if we do not need to know the absolute directory name, as we do now) and then put things like Application.name dynamically , but I do not know if this is kosher. I would have preferred that each site has its own Application.cfc (perhaps by dint of him being a virtual directory?), but when you go to connect to www.site1.com/mgmt/, it does not use www.site1.com/Application.cfc. I have other traditional sites where Application.cfc 'filter' to subdirectories, but there it is in the root folder, you log in to the root folder, and when you navigate to a subdirectory, CF seems to be aware that you are always in the same application.

  I apologize if I did not explain this well and I'm pleased to say whatever it is - would appreciate advice on how to better implement Application.cfc in a scenario of multiple-sites-on-a-codebase.

  Ah, if it's a virtual folder you will have problems. The ApplicationProxy is "the way" it's done, but (as you guessed it) CF looks at the file level and is not aware of any IIS mappings.

  One reason they cannot not just in physical directories? Even using something as a junction of Windows is that they are physically located in a different place?

• CF 9: FC ajax is not compatible with Application.cfc?

  Hello

  Background:
  I use the Application.cfc framework.  I like the onMissingTemplate, onError, and other features that it offers.  I worked with Application.cfc since CF 7.

  I started working on a project that required of CF 9.  I wanted to use a control controls cfgrid and also some of the features of ajax for a form.  I met problems with cfgrid controls immediately.  The problem was with the attribute of link calling a remote function in a CFC.  Here is a sample of the error message that I am able to get help from? cfdebug = 1 parameter to URL:

  JSON parsing failure: expected ' "' character 2: '&' in {& quot;}" page & quot; : 1, & quot; pageSize & quot; : 10 & quot; sortColumn & quot; : & quot; & quot; & quot; SLEEP tDirection & quot; : & quot; CSA & quot ;}

  Notice that all of the characters in double quotes are somehow be transposed to be html encoded values '& quot;'.  That's what the JSON parser complains.

  I went from the tasks and began working on a simple form that uses an autosuggest feature.  While I started to test the form, I found almost the same exact error:

  JSON parsing failure: expected ' "' character 2: '&' in {& quot;}" vcSuggestValue & quot; : & quot; 5 & quot ;}

  After you change the settings without success, I decided to rename all the files in my Application.cfc and create a Basic Application.cfm file.  It worked!

  Then, I tried to find out what was broken in my file Application.cfc I thought that, maybe, I got something screwed up.  I found myself in a file like this:

  
  < cfproperty >
  < cfset myIdName = "abc_admin" >
  < cfset variables.dsn = 'abc' >

  < name cffunction output = "onRequestStart" = "true" returntype = "boolean" index = "Runs at the start of a query" >
  < name cfargument = "TargetPage" type = "string" required = "Yes" hint = "Path of the web root to the requested page." / >

  
  < cfset request.dsn = variables.dsn >
  < cfset request.vcProductName = "abc.org" >

  
  < cfreturn true / >
  < / cffunction >
  < / cfproperty >

  As you can see the file Application.cfc preceding has almost nothing in it apart from a few names and a data source definition.  Controls the cfgrid and autosuggest < cfinput > tag are still not working.

  I took my project and moved to CF 8 server where these features worked well.

  I tried to use Application.cfc on a CF 9 server running on IIS 6 and IIS 7.5.  Two of them are failing, so I do not think it is caused by the web server.

  At this point, I am inclined to think that Application.cfc features CF ajax is broken for ColdFusion 9.  If you have a solution to this problem, please reply to this message with a response.  If you have ColdFusion 9, please try a simple autosuggest field on a form and see if it works with a website of Basic Application.cfc, please reply with your results.

  Best regards
  Scott Jibben

  You probably need to add an onCfcRequest() Manager to your Application.cfc file...

  http://help.Adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSe821657cd7d6f83f6daaa733122cf6931bb-8 000. HTML

  --

  Adam

• am I supposed to invoke application.cfc?

  My site is still on the index.cfm page, just throw a < cfinvoke > tag in there to call the application.cfc?  Am I supposed to the name with a capital letter A (Application.cfc)?

  You want the Application.cfc file to be in the same directory or in a directory of all CFML that you do not want to be affected by it.

  So for your index file root, yes you will probably want the Application.cfc file in the root web.  But it could be higher if you want it to be, but it's a little unusual.

• Application.cfm to Application.cfc: UNDEFINED Variables?

  I have an application that has been created in CF8... the previous programmer used Application.cfm. I prefer to use Application.cfc... so, I migrated the code to a .cfc... However, none of the variables seem to be defined. I placed the SystemFramework of onSessionStart, onRequestStart, rename the application whenever I change... I am constantly is UNDEFINED for my variables.

  Can someone tell me why this is?

  Second, for global variables such as serverRoot, secureServer, insecureServer, I guess that is the best place for these VARS SystemFramework... but for application objects, status, etc., it would be preferable to have these elsewhere? What is the harm in having all my variables global application within the SystemFramework?... .assuming they never defined. :/

  You are out of the method before anything can run. Remove the cfreturn or move it to the end of the function. Other than the lack of a few citations (maybe a problem of forum), it works fine.

  
           
  This will allow us to call any function object without instantiating
  APPLICATION.user = createObject ("component", "apps.com.User");

  These application variables must be declared in SystemFramework too. Otherwise, you re-create the shared components whenever a new user session starts.

  Post edited by: == cfSearching == -.

• Application.CFC and CSS

  I just started using CSS for the design of my pages, and I'm running a problem with maybe the page footer. My main page is divided into 2 sections (using div tags) the one on the left and the other on the right with a little space between the two.

  my page footer, set in my CFC application now between the two div sneeks instead of stay down (as was the case before I used CSS). What I am doing wrong? How can I get my footer application.cfc defined in the appropriate section (footer div) on my main page?

  Code on the page Structure:

  < body >

  < div class = "resultsDetailHeader" > < / div >

  < div class = "resultsDetailPicSection" > < / div >

  < div class = "resultsDetailDescriptionSection" > < / div >

  < div class = "resultsDetailFooter" > < / div >

  < / body >

  Without seeing the code for the full page and the CSS, it of a guess, but try to add to your CSS footer

  Clear: both;

  See if that helps

  Gary

• Application.CFC / cflogin questions

  I haven't used one before Application.cfc, but coming from a background of software development, I kissed the idea without reservation. However, I seem to have a problem and it is a lack of understanding of the functioning of the Application.cfc, or a lack of understanding of what happens when I do a cflogin. I posted this elsewhere and have not received aid, so I hope someone here can help you.
  
  I pretty much lifted logic cflogin directly a sample on the Adobe Web site, with only the insertion of a call from db, which makes it different. What happens is that if you start with a new session, you can link to the home page login screen, enter the login, then the next page (in which the form registers) is empty. Now, if I go back to the home page (go back one level in the directory), and then request the login page, I don't see anything more. Finally, if I change the address bar to point to my logout page, I get disconnected, it returns me to the home page, and I can now link to the login page. Thus, it appears that once I'm connected, a very bad thing that happens. There must be something that I'm really not understand CFLOGIN. What Miss me? Note that the index page is at a higher level in the tree of all the other pages that I am referencing in this post, including the Application.cfc, and they are all in the same directory. You can join my homepage at http://www.changent.com/rr/index.html. to connect, use the help / me (this won't last until I have an answer). To disconnect, click on http://www.changent.com/rr/app/logout.cfm. I have attached a copy of my Application.cfc and other models. Your help is really appreciated!

  In your Application.cfc file, the logic in the onRequestStart() method is correct. This correctly handles cflogin.

  The problem for you is that you also implement onRequest()
  If you implement this method, you must include target directly the page to view.

  Or you can remove this method so that it does not exist and the page you requested will be treated.

  Description
  Runs when a query starts, after the onRequestStart event handler. If you implement this method, it must explicitly call the page requested to treat.

  Syntax of the function

  
  
  ...
  
  ...
  

• Access to Application.cfc

  I ran into a problem yesterday at work, our environment runs CF7 on win 2003 server. But our site on coding leads former probably CF5, the question that I met yesterday was that our internet and intranet go off a custom built CMS that was built at least 6 years ago. He runs and creates its pages through an administration interface and displays the pages as if http://ouraddress.com/general/sub.cfm?source=employee my problem occurred when I tried to create a new Application and was being tested on site (127.0.0.1), but when I moved on our server of stadium, the Application.cfc file does not run according to the way in which our CMS has been designed. If I moved the app to root, it worked without problem. No matter who has previously met or have any advice? I'm probably going to be redrawn the backend to update our code to effectively use along side CF7.

  http://www.oursite.com/General/Sub.cfm?source=somefile

  And the Application.cfm file | cfc that is executed will be relative to
  the file rootdir/general/sub.cfm. It will seek an Application file
  in the general case and the rootdir in this example. Application
  compared to what be the memorials file contains the files do not attend
  come into consideration, in respect of the usual way systems as they are built.

• Since the recent upgrade, I don't see any of my projects in Shutterfly. Their customer support says that it may be the problem with the application Java and Adobe Flash Player

  See above - there known problems with these applications?

  Your player (if any) Java is not indicated clearly in your list of plugins, and your FlashDrive is several versions behind. If Apple has a site update, you can check that first. Mozilla site is here: http://www.mozilla.org/plugincheck/

• There is a problem of backup applications to iTunes to my new iPhone 6 s. apparently, there is an error that says that the applications could not be found. Why can't I make the backup?

  There is a problem of backup applications to i Tunes (previously synced from my iPhone 6) to my new iPhone 6 s. apparently, there is an error and the applications could not be found. How to solve this?

  Are the 6 and 6 times on the same iOS?

  ITunes is also the last version 12.3.3?