Similar Questions

• Buttons in white box... should have the bottom of page

  I'm new to the fireworks. Create a navigation bar with buttons. Canvas value transparant, as also the buttons in the up state.
  After the export and import of Dreamweaver. The navigation bar is white, although I expected the bottom of page to ' shine through. I can't to canvas of the same color as the page background, since the background is a gradient...
  What I am doing wrong?
  TNX for any help.
  Hugo

  Open your navigation bar, and then go to file > preview image. Select the export option 'GIF '. Select the eyedropper on the lower left corner and click the color you want to be transparent (probably white) in your illustration.

  Click export at the bottom and and you should be in good shape!

• pins connected vs topology

  Hello

  I am currently using a PXI-2529 matrix with a topology 8 x 16.

  According to the scheme of connection in OR help switch (see attached photo), if I connect R7 to C15 I should have pins C16 and C6 connected to C10. Right?

  But when I test the continuity between these pins, I don't that C6 and C10 connected... as if the 2 banks were not connected together as topology involves...

  Is this normal?

  Hey zyl7,

  You use the connection TB-2635 block, which configures topology?  "" "If not, you will need to wire manually topology, as shown in the OR help switches" devices "NI PXI-2529/SMU" topology matrix 8 x 16 2-wire.  Of this document:
  «If you do not use the NI TB-2635 terminal block, short external pins to reach a matrix topology 8 x 16 2 son.»  This sentence is a pine table, you will need to connect.  For example, B24 and B14.

• How to use pine TRG in controller PXI-8176

  Dear all,

  I have the Thermocouple data acquisition system. In which there are 2 PXI chassis (1) 1002 with

  PXI8176 controller with RT, map 6071E PXI data acquisition (2) block 1001 SCXI with SCXI-1125 and SCXI1327 card.

  PXI 6071E connected in 1125 SCXI with SH1006868 cable and adapter SCXI1349.

  I'm using Labview 8.6, DAQmx9.0

  I develop the program for the continuous acquisition of thermocouple. Now, I want to do the program on the acquisition of database trigger.  When the trigger pulse comes the system begins to acquire (newspapers and data in the file) to userdefine times and stop the acquisition. Again when the trigger pulse comes new system begins to acquire and to stop at defined time.

  There is a single pin FIT on the PXI-8176 controller, can I use that one and how do I use it? Or I have to use the separate DIO line for trigger?

  You can guide me how I can develop this system.

  Thank you.

  -Vishnu

  Yes, you can route a trigger for channels PXI trigger in the bottom of the basket of the PXI chassis via the SMB connector located on the front of the PXI embedded controller.

  Please see tutorial following example or the same article on devzone

  Hope this helps

• How can I tell Firefox to "pin" a tile for the site displayed on the new tab page?

  I can remove the "little used" sites the new tab Page, but can't run Firefox to add or "pin" a tile for a site that is frequently used on the Page tab. How can I tell Firefox that a site should be "pinned" on the page tab?

  Hi Csbhkvp1, the only way I know about pin of the slab which is not already on the page (sometimes if you zoom using Ctrl-to see all 15 tiles you could spot it) must first of all to bookmark the site you want to pin as a tile, then add the bookmark to the page. Please see this article for more information on this method: customize the page new tab (section "Add a tile from your bookmarks").

  Sorry, Mac, as you know, zoom out is not command - Ctrl

• OR TB-2605 terminal block for the NI PXI-2503 relay card PIN GND interconnection?

  I use the relay Board NI PXI-2503 and the NI TB-2605 terminal block to impliment some of interconnections, my question is on the Terminal it is a GROUND terminal on the GND PIN. What electric pins or card background basket or internal relay Terminal this 'point' interconnection to?

  Hello gene01,

  I don't directly know what this PIN connects to.  Following the trace, that looks like it is connected to the mass of the chassis as the 2503 itself does not have a grounding pin.  I have this will confirm for you, but is there a specific reason for your application need you to do this?

• Spread of 4 x 4?

  Is it possible to create a gap of 4 x 4 in InDesign? I need to create a 4 x 4 A1 size, presentation of the landscape orientation. Is it possible to set my paging to display this exactly as it should be pinned to the top? I would normally ask in Illustrator, but since I'm any Exhibitor in InDesign, it would be much more sensible to do this way.

  Thank you

  Even better - to move the pages with the tool pages.

  Will disable the pages in a document mix

  

  Drag the pages to spreads

  

  Select the tool pages

  

  On the page layout - drag your pages under the other

  

  What is interesting is that the 2 albums are page 1 and 2. Bottom 2 are page 3 and 4.

  You can export single pages as page 1,2,3,4

  Or you can export under a spread and exports actually under this spread.

• additional hard drives will not be broadcast - MacPro

  My Mac pro:

  In early 2008

  4 GB of ram

  El Capitan

  2 x 2.8 GHz Quad - Core Intel Xeon

  ATI Radeon HD 2600 XT 256 MB

  500 GB SATA drive

  I write this new cause I seem to have lost the original - post not found... Laughing out loud

  I installed 2 HD to my PowerMac, Mac OS X (10.5.8), G4 - AGP: 450: sawtooth: 2 GB ram: 2HD, I did as stated by opening the door, remove them, then you place them in the Mac Pro HD bays. Unfortunately neither one will be recognized. Has been used for storage, so there is no BONE inside, just files, but the other was / is a disc master so that's probably the reason why he clung to restart, he got confused about which lead to start with, old or new... there mount Lion

  Additional discs for the Mac Pro will I be some kind, ATA disks that do not show.

  Mac Pro drives are SATA drives and have a connector two distinctive parts which provides power on the side of 15 pins and data on side 7-pin:

  

  (click to enlarge)

  image of wikipedia

  Have you used your Mac Pro sleds? you tighten the screws so that they were all "just tight" and slightly compress the washers? you took care to make sure that disks have been completely recessed in the bottom connectors of basket? Have you had problems to just close the door?

  Finder cannot see them?  > > Use Finder preferences to display all readers.

  .. .or even though they cannot be seen in disk utility?

• Speed of the satellite - 12L - C850D slow WLAN and LAN

  Help please

  I C850D - 12L running Windows 8.1 and as far as I know, have all drivers up to date according to PC world.

  I am not receiving the correct speeds both hard and connectivity wireless. Should get 30 + bottom and 10 upward but getting 10 down and 5 up.

  I did the usual stuff of BT and they are on the case - they say that my hub receives correct speeds and suggests that it is my drivers?

  Another laptop received very good speed of my hub. HUB is the latest issue of BT

  Happy new year

  > I did used * BT stuff * and they are on the case - they say that my hub receives correct speeds and suggest it's my drivers?

  I m really confused. You're talking about BT (I guess you mean Bluetooth), but this Toshiba laptop can't stand NOT BT's
  The device is equipped with a Realtek RTL8188CE WLan card 802.11b/g/n and with LAN Fast Ethernet 10BASE-T/100BASE-TX card.

  But he can't stand BT

  So could you please provide more details or could you clarify this misunderstanding

• Tecra 8100 - screen goes black sometimes

  Hi members,
  I recently got a Tecra 8100 for cheap on eBay.

  The screen sometimes goes black its still on I need to press the shaft close to the screen and it beeps sound sounds and back on.

  I removed the frame of the screen and it made the difference for a about a week but just happen again:(mais je croise les doigts pas très souvent.)

  I read on google etc. it can be sumtin with led, etc. I just want to know how to replace the part?
  What part I need to replace etc.?

  I disable all power management things, and sometimes even of it is would no doubt something with the screen.

  I need ideas how to resolve this because it's a good laptop for a student lol prity.
  Thanks for reading and any rear power

  Hello

  Sorry, but it's really not easy to say what needs to be replaced.
  But it s certainly a hardware problem I put t know what should I PIN you meant exactly, but maybe a loose connection is causing this problem I mean a FL-inverter connection

  Here's a useful page [how remove and replace card ups FL on Toshiba Tecra 8100 | http://www.irisvista.com/tech/laptops/Toshiba-Tecra-8100/remove-replace-fl-inverter-board.htm]

  Maybe it could be useful for you

  In any case, these hardware issues are always delicate, and in most cases, each unique piece, and the connection must be checked. It's not easy, and in most cases and the computer laptop technician should take a look on this laptop

• Where the option close multiple tabs? It has been a right-click in the function 'list all tabs '. Now it's gone!

  Well although I figured out how to get the toolbar tab back where it should, at the bottom where easy access to him, but now I see that the option "Close all other tabs" that was in the right click menu of the arrow 'List all tabs' has disappeared.

  Is there anyway to get that back? This design change is really not as good as 3.5. Also say that that person can slow down. Who can understand what it says?

  Thank you!

  In Firefox 4, the tab bar is a regular toolbar and which causes the toolbar context menu show if you right-click.

  You can right click on the tab that you want to keep to "close other tabs".

• Need an adapter wireless - A100 Toshiba protégé

  Ive recently reinsalled windows XP Pro on a Toshiba A100 protected and it was impossible to find most of the drivers, but I could get it from this website: http://pc.toshiba-asia.com/support/downloads/index.jsp
  The only thing is that I'm unable to use wireless to connect to the internet. I installed ConfigFree and then tried to connect wireless to something and it tells me that there is no adapter wire/unmanned. It is also curious to note that when I go into the hardware Manager, I can't find the wireless adapter. And therefore impossible to update the driver.
  Can someone help me please!
  Very much appreciated.

  Nick.

  Hello

  Are you sure of the Portege S100 was delivered with a minPCI wireless network card?
  You should check the bottom of the unit. There you should find a label with a WLan card name. If the details WLan card fails, I assume that the wireless network card does not exist.

  By the way; I advise to use the XP drivers from this page:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, you will also find an installation instruction that allows to install all the drivers in the correct order.

• Satellite Pro M70: How to use Bluetooth?

  the dose M70 [PSM75E-009004EN] have built in bluetooth. If it dose how do you use it... because his got the bluetooth options. his confused me!

  Thank you

  Hello

  As far as I know, this unit was delivered without Bluetooth, but if you want to be 100% sure you should check the bottom of the unit. If the device supports Bluetooth technology, you should find the label of BT. If the unit have no BT cards, so you will find no BT label. Easy ;)

• SAS on RD450

  I have a 70DC RD450 (disks 3.5 ") type, which has the SATA AnyRAID110i controller integrated with marked cables 'SATA' at the bottom of the basket in the car.

  My question is can I buy just the controller SAS RAID500 and install it and then plug the SAS is the bottom of rack SATA only or existing records on the backplane?

  Thank you!

  Hello

  Great question! You CAN buy a SAS controller, and then insert the SAS drives if you wish. Backplane should work with either.

• Problems with the simple serial communication.

  I followed a tutorial online to start learning basic communication series. The involved tutorial shorting pins 1 and 3 on port 1 Comm and write a simple program (attached). I've edited it a bit, the program to see varied results I get when trying to write and read a simple sentence via a serial port.

  Could someone explain what causes the kind of result shown in "Serial Comm example.png"? I think it has to do with timing. Why would be transmitted only the parts of the sentence?

  Thank you

  Sarah

  sarahzig wrote:

  The involved tutorial shorting pins 1 and 3 on the Comm 1 port

  What should be pins 2 and 3?  On a standard serial port DB-9, pin 2 is the receive and pin 3 is the transmission.

  Now for your code...

  1. move the Serial Port to be before the loop to set it up.  Simply configure the port once.

  2. close the port after the loop.

  3. managing your error after closing.

  4 stop your loop on an error or the stop button has been pressed.  You will need a RC in there.

  5. no need to Flush Buffer function.  Remove it.

  6. using the bytes to the Port is a dangerous thing.  It introduced all kinds of race conditions that are interesting.  Instead, say VISA reading to read the number of bytes that you expect to read.

  6a. Moreover, don't forget to send a character to end of line at the end of your data and all the number of bytes to read something a lot more than you ever expect read.  The VISA read will stop reading when he a) sees the number of bytes, it was said to read, b) sees the stop character (currently enabled and set to a line break, which is part of the end of line), or c) the time-out occurs.  Whichever comes first.

  7. with 6, the wait is no longer necessary.