Similar Questions

• Microsoft Solitaire problem daily challenges with Klondike on July 19, 2014

  The expert level Microsoft lonely daily challenge for July 19, 2014 has a glitch. The goal of the challenge of the Klondike is to place two jacks on the Foundation within 85 shots, but the counter above is registered not when plugs are on the Foundation at all. I've never met a problem before with Microsoft Solitaire daily challenges, and there I am working on Windows 8 on a HP Pavilion.

  Managed to find a machine 8.1 to play on, and it worked, so I guess that's the issue. [Maybe a new version of the app?]

• Challenge with VW car system

  Hello

  I just got to work th a Defy with Motoblur (whatever she don't know either, I should never she) the first thing I discovered is that it will not pair my RNS850 VW Touareg system via amps... what a disappointment! More frustrating but, I hope it's something that can be rectified in the settings, is that while I can still connect via Bluetooth a2dp, the car shows only seven letters of any contact. So I have about 20 numbers with the name of Berkeley, and I do not see the names. It's not fun to all try to guess what is one I must call.

  Another thing the phone keeps it kinda randomly chime... as someone the abandonment of a cover of pan on the floor. Does anyone has an idea how to stop it and why it does? I'll give a few days to try to find my way around it before you throw it away and go back to my old NOKIA. :-)

  Thank you

  I'll start with the easy answers first; the sound you hear is the default notification sound. This can be triggered by e-mail, SMS alerts, etc.

  The problem with the bluetooth, I can't check because I do not have access to the same vehicle as you. I can however tell you that; not all devices are compatible with the systems of dashboard, given that a wide variation in the types of devices.

  You are on Android 2.1 or 2.2 Android?

• Challenge with a power lose (rickety) button

  According to the name of the topic, my Defy, just a couple of weeks or older, a power button that flickers a bit if shook. Anyone else facing this problem? A 30 days replacement warranty in the store that I bought it so I was intending to replace it with a new one if this problem compromises the resistance to water of the phone... it will be... should I? Thanks in advance.

  I took my defy outside a couple of times :-) The button is just a piece of plastic that even if remove you it completely will not hurt resistance to water

• possible challenge with IE8?

  I've updated to IE8 a few days ago. (System: Windows Vista Home, Norton360.v3)
  Now, when in Windows Mail (to 6.0.6000...), I can not open attached .jpg, .zip, .pdf files (even those received and opened before the IE8 update.)
  Any suggestions?

  Thank you.
  Kind regards
  JB

  Winmail opener - Tools - Options - Security tab - do not allow the opening or saving of attachments.

  Your antivirus can also have parameters for the latter.

  Also - start - programs - find Windows Mail icon on this list (NOT the one on the top of the Start Menu)

  Click with the right button on Windows Mail Icon - Properties - tab shortcut-

  Be sure to start in East = %UserProfile% (if different note this because your antivirus might have changed, he)

  BTW, I make good use of PopPeeper that has great features and allows a fixation easy access. Most of the antiviral product such as Avast that I use always check it out.

  PP supports multiple operating systems Pop3, IMAP and several at the same time web-based email accounts. Free.

  http://www.poppeeper.com/

  Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• VMWare Player-Challenge with network installation to enable the work offline connection-thanks in advance for any help

  Thank you very much in advance for all advice here.

  My situation:

  Developer of novice using a laptop Windows 7 with Ubuntu Server on VMWare Player.

  Customer need and server side development progress on the computer laptop while at home and outside (travel, sometimes without internet/Wi-Fi connection)

  I tried NAT, Bridged, Host-only, and can't seem to find an approach that works offline...

  More details below...

  My question

  How to configure the network to use VMWare player for development while home/away (PCI offline without an internet connection)?

  Thanks again

  Tony

  Other details

  My laptop runs Win7, I use Google Chrome, PuTTY, WinSCP client-side

  My hardware router has an IP address 192.168.0.1

  My VMware - Server Ubuntu - is configured to use the DHCP protocol

  Online I mean a wireless connection to the router and the internet

  Offline - I mean wireless internet connection/no

  Networking networking

  Works ok online. Does not work in offline mode

  When online, I get IP 192.168.0.7 ifconfig in vmware... I can ping the router from the virtual machine and ping the server ubuntu from the command-line to Win7

  Offline... Ping from VM to the router and Ping from Win7 to VM fail.

  NAT networking

  Does not work online or offline

  When 'online' I get IP 192.168.91.128 to ifconfig in VMware, I can ping the router hardware virtual machine ok. When I ping the server ubuntu command line of Win 7 I Request Timed Out

  In offline mode, I get the same IP 192.168.91.128 to ifconfig in the virtual machine. I can't ping the virtual machine hardware router... Destination Host Unreachable. When I ping the server ubuntu command line of Win 7 I have inaccessible Destination host

  Host-Only

  does not work for me either online of offline...

  While online, that is to say that I can get the IP... 192 168 110 128 but the virtual machine can't ping router... Network unreachable. Win7 cannot ping server... Request Timed Out

  While offline, I get the same address IP 192 168 110 128, but VM is unable to ping router network unreachable. Win7 cannot ping server... Destination Host Unreachable

  On the screenshot-VMnet1 as VMnet8 - have APIPA (assigned automatically free private) IP addresses, which should not be the case. Unfortunately I can't tell you what is the cause! Could be something of a facility fails to a VPN client. What you can do, is click on the 'Restore defaults' button in the editor of virtual network or re - install VMware Player (uninstall, reboot the host and reinstall "as Administrator").

  If you have access to the virtual network editor depends on the VMware Player version you are using. With some older versions - which had the "vmnetui.dll" in the installation folder - it was possible to start to operate:

  rundll32.exe vmnetui.dll VMNetUI_ShowStandalone

  André

• Challenges with SQL query

  Hello all,.
  
  I run the query below
  Select c.name_line1, c.name_line2
  of tabele c where dra_code = 115
  and dus_num = 111111
  
  The output of the query shows name_line1 = name of family and Name_line2 = first name and middle name.
  
  I need help to change the query to return only the name of the Name_line2.
  
  Trat kindly as urgent

  regexp_count(name, '[[:space:]]') = length(name) -  length(replace(name,' '))
  

  with data as
  (
    select 'Last_Name First_Name' name from dual
    union
    select 'Last_Name First_Name Middle_Name' name from dual
  )
  select CASE when length(name) -  length(replace(name,' ')) = 1 then name
              ELSE substr(name, 1, regexp_instr(name, '[[:space:]]', 1, 2) - 1)
         END name
  from data;
  
  NAME
  --------------------------------
  Last_Name First_Name
  Last_Name First_Name            
  
  2 rows selected.
  

  Try to use the function REGEXP_COUNT returns the invalid identifier.

  select * from v$version
  

  set linesize 200
  col name for a40
  col name_edit for a40
  col text1 for a20
  col text2 for a20
  col text3 for a20
  with data as
  (
    select 'LastName FirstName' name from dual
    union
    select 'LastName FirstName MiddleName' name from dual
  )
  select
      name,
       CASE when length(name) -  length(replace(name,' ')) = 1 then name
              ELSE substr(name, 1, regexp_instr(name, '[[:space:]]', 1, 2) - 1)
         END name_edit,
         regexp_substr(name||' ', '[[:alpha:]]+. ', 1, 1) text1,
         regexp_substr(name||' ', '[[:alpha:]]+. ', 1, 2) text2,
         regexp_substr(name||' ', '[[:alpha:]]+. ', 1, 3) text3
  from data;
  
  NAME                                     NAME_EDIT                                TEXT1                TEXT2                TEXT3
  ---------------------------------------- ---------------------------------------- -------------------- -------------------- --------------------
  LastName FirstName                       LastName FirstName                       LastName             FirstName
  LastName FirstName MiddleName            LastName FirstName                       LastName             FirstName            MiddleName          
  
  2 rows selected.
  

• Challenges with the Animation triggers

  Hello - I spent some time trying to figure how to make the click boxes

  I have an animation of text that appear on the first slide (6). I click areas, and then I created the 6T

  object animation ext. Then "on success" for each click box set to "apply the effect" then

  the name of the object is the text of the legend. Yet, when I saw my slide, all the animations of text appear according to the way the schedule is set up for each of

  These objects, without taking into account the relationship of the trigger. On the timeline, on the effects tab there is a drop down "animation trigger."

  and it's default "(Self) time-based animation. When I change to select the appropriate box and click, once I have away th

  e text animation object, it goes back to the ' (self) time-based animation.

  animation trigger. Anyone know what I'm doing wrong?  Thank you!

  Hello

  Rod gave you the easiest way, if we understand your question all right: you have created objects of the type "Text Animation" and want to display when the user clicks a button or click box to?

  But I'm puzzled your sentence because you are also talking to the effects? Perhaps you did not insert text animators with their schedule on the chronology of the slide, but you tried to apply effects to a text caption? This could be because you do not find the animation desired provided with Animations of text by default out of the box. Could you please clarify this? In this second case, it is also possible to trigger the effect (to avoid confusion, I'll use that Word) by clicking a button or click. The effects can be based on the (default) time, triggered by an interactive object such as a button or click (box possibly text entry) or by a tip action. If you want to trigger the effect by a button, you create this button and in its properties, go to the accordion of the Action, choose the effect apply and then choose the legend text (or other object) you want to apply the effect to. Then click on in this accordion on (highlighted) selection button and the effect controls panel and text caption properties is displayed with the TC selected so that you can create the effect.

  

• Toyota link does not synchronize with the iPhone 6 s more. Bluetooth works with phone and music but unrelated to Toyota

  I continue to be not challenged with iPhone 6s over with now no connectivity through Toyota link although I have connectivity through blue tooth for music and phone. Do not have this problem with previous iPhone.

  Any advice welcome.

  Compatibility list which shows not its compatible with the more than 6 s

  Can contact them and see if it is.

  https://www.Toyota.com.au/owners/toyotalink

• Why Canon does not have old adapters for my SLR camera lenses? I can get them with Sony, but not for Canon

  I have an old Canon Ftb with a goal of 1.4 fd. I'm getting into digital cameras now (just to have a 12 G for now, mainly used for underwater photography). I would like to stay with Canon, but I'm very annoyed that Canon doesn't have a way to continue to use their old lenses. Nikon, for all their flaws are much better at you can continue to use your old stuff.

  Then I find that if I'm going to Sony (Yes, really, Sony) can I use my lenses from Canon ol via an adapter. This my Canon, tell me it ain't so. You must have a way, I just have not yet discovered.

  There are many challenges with this and the "adapters" are to be considered with a certain scepticism.

  The FD lenses are mechanical - no electronics.  The case of the unit, on the other hand, has an electronic interface for the lens - nothing of mechanics.   This means that if you set the goal, you would have to manually set the aperture but also of manual focus of the lens.

  Your Canon DSLR had a split Prism focusing in the viewfinder to help.  A new camera does not work.  The reason why there is no help from the development is because most of the lenses are autofocus so it is simply not necessary.  This makes it particularly difficult to tell when you've worn exactly the goal.  Making it even more difficult is that any device with a sensor size of APS - C (most of them) have a small viewfinder that you had on your Canon SLR photography.

  In addition, the lenses are optimized for a specific back focus distance.  Canon's EOS cameras have a depth of 44 m from the mounting flange of lens at the front of the body at the level of development within the body.  When you use an adapter, it modifies that distance.  If you change too much, the lens behaves as if it is mounted with extension tubes, the entire range of focus is moved closer to the camera, and it can be is no longer able to focus to infinity.

  There are 3 parties that make these lenses... conversion kits but they do them for a few drinks (not all) and that they require a bit of surgery on the goal (e.g. this level which protrudes beyond the rear of the lens used to set the aperture value should go).

  But... the modern lenses are just so much better than the old FD lenses.   Requires really quite the dozen FD lens to make it interesting this fuss.  Also, I own a Canon SLR (AE-1) and a few glasses of FD... but have no interest in trying to use one of these lenses on my EOS DSLR cameras.

  I think that this question almost as Ford asking why they do not wheel adapters let wheels it T model mount on a Mustang of 2015.  The new wheels are so much better than the old wheels, you want to continue to use the old wheels.

  Leave your old lenses in the past.  Mine are on the shelf alongside my AE-1... body as a conversation piece.  I don't actually use them.

• 20 Mhz vs 40 Mhz compatibility with

  Hello.

  I wonder if there is a difference in connectivity at 20 Mhz and 40 Mhz channels in 5 GHz...

  Assumptions:

  1. I have configured Cisco Client band elect on my WLC

  2. I activated the band Client elect on my wlan

  3. my wifi dual card has a favorite band selected to 5 GHz

  4. my 3700 dual band Access Point configured channel 6 to 2,4 Ghz and channel 36 to 5 GHz.

  5. I connect to channel 36 with my ipad.

  7. from the perspective of WLC I stay connected to channel 36, but I know that channel 40 is a long string of 36, and now I am connected to a channel of 40 Mhz successfully.

  8. I have all of my 600 AP campus with a 5 GHz (40 Mhz for all channels) channel binding. The goal is to increase performance and optimize the use of the spectrum.

  Problem:

  This week I had a company to conduct a study on the spot in my campus building, and they told me to turn off link in 5 GHz channel because if some dual band devices will not be able to connect to the 40 Mhz channel, they will automatically move to 2.4 Ghz.

  There are devices dual band that cannot accept the 40 Mhz channels?

  B - if don't support it not that they will be 2.4 Ghz mode directly or they will stay on the servile channel, but using only 20 Mhz?

  C - he also said that at 40 Mhz have reduced coverage compared to 20 Mhz channel. is that correct?

  I decided to ask the Pro because I'm really suspicious to this topic.

  A - There are dual band devices which cannot support 40Mhz Channels?

  Yes, there is a dual band client that does not support the channel of liaison in 5 GHz. Mostly pre-802.11n dual-band customers.

  B - If the don't support they will mode directly to 2.4Ghz or they will stay on the bonded channel but using just 20Mhz?

  They connect at 5 GHz with a bandwidth of 20 MHz. In any case note that device client is the one deciding what AP they connect and which group. Thus, there may be different behaviors in different clients.

  C - He also told me that bonding to 40Mhz will have reduced coverage compared to 20Mhz Channel. is this correct?

  Now a days WiFi, to reduce access point coverage to meet capacity needs. Challenge with 40 MHz is re - use and co-channel interference. With a width of 20 MHz, you have 13 CH (except UNII-2 Ex) & will be reduced to 6 If you use 40 MHz. So, if you and dense area where more than 6 APs on close by the deployment of 40 MHz could then lead to co-channel interference (CCI), which reduces performance. Deployment of high density therefore prefer to use 20 MHz to 5 GHz channel width or 40 MHz can be used without any other problems. So I would check if they showed to your ITC in your deployment of 5 GHz, then only I would consider to go with 20 MHz on these specific sector and leave the remaining 40 MHz. HTH Rasika * Pls note all useful responses *.

• There was a problem downloading the daily data of challenge. 002000 error code

  "002000 error code.

  I get the following message "there was a problem downloading of data daily challenge. Please check your Internet connection and try again. Please refer to the 002000 error code. "at the opening of Mahjong and Solitaire, I know that the Internet connection is OK other wise I wouldn't post this - I did a search for the 002000 error code and can't find an answer that someone know what is the fix.

  Hello

  1 screen to start other applications work correctly?

  2. you have any software from third-party anti-virus installed on the PC?

  Follow the steps in this article and check if that helps:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  (First run the troubleshooter App)

  For additional troubleshooting steps, see the link:

  Correct the errors that occur in applications of Xbox on your PC Windows 8

  Problems with the daily challenges with some of the Microsoft game apps, take a look at competent instances Xbox here: http://forums.xbox.com/gfw/xbox_on_windows/l-o/f/3066.aspx

  Let us know the result. If you have any other questions, we will be happy to help you.

• 3rd party Cookies will disappear with IE9 and Firefox 4? Impact on Marketing Automation?

  People, was curious to know how other people are considering (or have thoughts) all about losing third-party tracking with more recent browsers cookie?

  
  Looks like this could be very disruptive for all providers of marketing automation, or at least some sort of a switch to a party cookie should be first tracking system. If I read correctly, those systems it will be progressive, profiling, some stats CTR and certainly notification Web site visitor would be affected.
  
  More info here: http://paidcontent.org/article/419-mozilla-ceo-do-not-track-option-will-be-in-firefox-4/
  
  Thoughts?

  With the Firefox solution, we do nothing, since it requires their header and sites to work together. The challenge with Firefox and their solution is that the addition as a header-not-track, is that it requires browsers and sites to implement it to be fully effective. In other words, you can set the-no-track disengage all you like to feature in your Firefox browser, but if Web sites that track chooses to ignore the header-no-trail of Mozilla it will not do anything good. We are not ignoring the issue of Firefox, but believe that their solution is not one that will provide the appropriate consumer control.

  Regarding IE, they will be using a local list that the user must fill with sites that they do not want to be tracked on. There is not much we can do about that the consumer has the choice already today to block ALL cookies regardless of the type of part. This feature gives just more detailed control to the consumer at the level of the web address vs just block all third party cookies.

  We tested 'keep my Op-out Google' and it does not affect email and web click followed. It is only monitoring online ads.

  Finally, we are looking at or not stay with third-party cookie tracking or move to the first party. You can imagine my choice but there will be a huge change in how customers work must pass if we choose one over the other. More to come as soon as this.

  -Dennis

• With the help of coupon in batches with different expiration dates

  I try to use coupon lot to offer free delivery to users. My requirement is to expire promo, 7 days after it has been generated.

  I am using batch of coupon for this requirement as promo codes will be generated on the fly.

  The challenge with the help of batch coupon is that it has a fixed start and end date so that all the generated code coupons will have the same maturity.

  Is there a way to set the expiration in individual coupons?

  Thanks in advance.

  I expanded ClaimableManager.createBatchPromotionClaimable () method to achieve this.

• Disabling name username/password challenge

  I created a process of workbench to extract data from a database and added a data connection to the service to call the process and link the data fields to the form. When I click on the button to call the service I am challenged with my username and password entry before that the service returns all data. Is there a way to disable the request of user name and password during the call to process the form?

  Thank you.

  Hi Mike,.

  Below that authenticates, the 'Run As', try this: select box "Special run under ' and select 'System' in the menu drop down and save. Make sure that you save it to make the change effective. It will be useful.

  DAO Han