Chang not saving settings do not

Similar Questions

• How can I delete unwanted notice of a change of browser settings that will not respond?

  The view is a window that appears while I'm in Google.
  The title is "changing the browser settings.
  below, as well as the yellow triangular warning [!], is a choice:
  'Keep my current settings', or
  "I am aware of this change and trust him.
  Regardless of all choices, clicking the [Yes] button has no effect.
  Neither will by clicking on the [X]

  I don't know what that means or how to remove it.

  To remove unwanted toolbars, try here first:

  Orange Firefox button or classic menu Tools > Modules > category: Extensions

  Most should have a Disable and a delete button. If find you one that has an off button, but not a button Delete, so no doubt it must be removed by the control panel "programs and features".

  I suggest disable all nonessential extensions and restart Firefox to see if that reverses the problem. You can reactivate some of your less critical extensions that you find the need.

  Can track you?

• I can not open a new tab (empty) I change all the settings. However as I said well can I open a new tab with a link without a link, I can't open a new (empty) tab.

  I can not open a new tab (empty) I change all the settings. However as I said well can I open a new tab with a link without a link, I can't open a new (empty) tab.

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Tecra A3 does not work after changing the power settings

  I changed my power settings in my tecra a3 laptop and now it does not start correctly. wants to start but just keeps going back to press F2 or F12 it please help.

  Hello
  where did you changed them? In the BIOS or in the Toshiba HW setup?

  I suggest you go into bios after turning on your machine. You have to hit just F2 Ant then in the search for bios for setting "all default setting" or something with "bios setup defaults" to reset your bios settings.

  After that, your computer should start up again.

  Welcome them

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• This folder is located in the windows folder: $NtUninstallKB36574$ It is not available and you cannot change the security settings.

  This folder is located in the windows folder: $NtUninstallKB36574$
  It is not accessible.  I can't change the security settings.
  It is the remains of an outbreak of the virus.
  I saw that on 2 client computers this course last 6 months.
  So, how is it possible for an inaccessible folder to administrators?
  How can I change the security settings to remove.
  After you run several virus cleaners, I'm pretty sure that the virus has disappeared.
  Ideas?

  You should be able to remove it from the command prompt in Windows Repair Mode.

• transformation script changes not saved in design

  Hello

  I made several scripts processing to change my relational model to the Data Modeler.

  One of the scripts defined abbreviations of table for all the table based on the PK constraint. (I'm importing the model of my data dictionary which has PK constraints defined as {abbr} _PK)

  After I "Apply of Scripts of Transformation Custom", I see that all tables have now an abbreviation of the table.

  However, if I save my design, close and reopen it, all abbreviations are empty again.

  I did a few tests and manually fill the field of abbreviation Table changes be saved.

  If I check the table XML files, I can clearly see that the table for which I manually added the acronym has a < short > tag, which is not what I filled auto with the transfer script.

  I noticed a similar behavior for scripts that I use to fill the parameters of Auto_inrement and others. After I run the script, I can see all the values filled in my template, but is not be saved and I lose all the changes made after closing my model.

  I noticed that the changes be saved if I choose Save as and save my template in a new directory (however to register as in the same directory create a SVN error).

  Is there something I should add to my .js script that changes be saved?

  Is this a bug?

  Does anyone else have these issues?

  I use Data Modeler 4.1 early adapter on a win machine 7.

  An example of .js script I use:

  //******************************************************************************

  //

  NAME: set_table_abbreviation

  AUTHOR: NVDA - NIAUW

  OBJECTIVE: use this script to define abbreviations of table in the physical model for each table

  VERSION: 1.0

  //

  PREREQUISITES:

  -Table with PK constraint and name constraints = {table abbr} _PK - as it is in the designer

  //

  //******************************************************************************

  load compatibility to 4.1 data maker script (ea)

  Load("Nashorn:mozilla_compat.js");

  import Java packages

  importPackage (javax.swing);

  //----------------------------------------------------------

  Global declarations

  //----------------------------------------------------------

  var msg ="";

  //----------------------------------------------------------

  Main body

  //----------------------------------------------------------

  find all tables in datamodel in table

  tables = model.getTableSet () .toArray ();

  loop over the tables and do something with it

  for (var t = 0; t < tables.length; t ++) {}

  If (! table [t] .getAbbreviation ()) {}

  var abbr = setAbbrv ([t] tables);

  If (abbr! == ") {}

  tables [t] .setAbbreviation (abbr);

  tables [t] .setCommentInRDBMS ("abbreviation table: ' + abbr");

  MSG += "table" table [t] .getName () + 'got abbr' abbr + "\n";

  }

  }

  }

  inform about what happened

  If (msg! == ") {}

  JOptionPane.showMessageDialog (null, msg);

  } else {}

  JOptionPane.showMessageDialog (null, ' no table (without abbr) found.) ») ;

  }

  //----------------------------------------------------------

  Functions

  //----------------------------------------------------------

  FUNCTION: setTbleAbbrv

  //----------------------------------------------------------

  function setAbbrv (table) {}

  var = abbr "

  var s = table.getPKeys () .toArray ();

  for (var t = 0; t < constr.length; t ++) {}

  cast to string

  var strConstr = constr. [t] + '.';

  If (strConstr.match(/_PK./)) {}

  abbr = strConstr.replace var ('_PK' ");

  }

  }

  If (abbr = ") {}

  MSG += "table" + table.getName () + "is not a PK constraint. \n » ;

  }

  back to abbr;

  }

  FUNCTION: read

  //----------------------------------------------------------

  function read (pMessage) {}

  var input = JOptionPane.showInputDialog (pMessage);

  return entry;

  }

  Hello

  in the loop where you treat the tables, do the following:

  tables [t] .setDirty (true);

  This will mark the object as being edited and saved during the registration of the design.

  Joop

• I disabled Adobe on my old computer so that I could download in my new.  I have the disc and the serial number, but then a window came during deactivation to change my proxy settings, which I do not know how.  However the version on

  I disabled Adobe on my old computer so that I could download in my new.  I have the disc and the serial number, but then a window came during deactivation to change my proxy settings, which I do not know how.  However, the version on was on my old computer is deleted but I can't load to my other because it gives me a message that I have exceeded my limit.  My limit is 3 computers and now I have 2 and want to download to my new.  HELP I can send you the serial number

  You are allowed to have two active facilities.  You need to contact Adobe support via chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Pe11 - do not change the project settings based on the video source

  I keep the light in various places PE11 should read my video source and change the project settings for the game when I place it in the timeline in Expert mode, but I don't see any indication that this is happening. No matter what kind of video, I add, the editing mode (and other settings) in the settings of the project remains the same.

  I'm working with older clips (smaller than 720 x 480, 25 fps), and none of the presets project apply.

  What if the project setting does not match what I'm getting? Or it is made irrelevant by the publication settings I use (assuming I choose good here)?

  Thank you

  Dave

  As you have seen, WMVs will not change your project settings. In fact, I'd like to discourage you by their use as source files.

  WMVs are a good video source you change in Windows MovieMaker - but they make for a source file bad enough for virtually any other video editing software.

• JDev 11 build 5188 - Subversion - changes not reflected in Application Nav

  JDeveloper 11 build 5188
  Versioning support FRO Subversion 11.1.1.0.31.51.88
  CollabNet Subversion on W2k3 Box - powered by Subversion version 1.5.5 (r34862)
  Callabnet Apache using integrated with dav - svn support with the configuration of basic authentication. Works perfectly in the browser to see the projects Check-in!
  
  I pretty much followed the steps described in the article of John Stegeman to http://www.oracle.com/technology/pub/articles/adf-development-essentials/part1.html (great article, John should write a chapter in the command source in the next book of JDev 11 Duncan Mills working, just my 2 cents)
  
  After the first check in files, I did NOT see the icons changed in the browser of the Application. I opened the mywork directory in a file manager and delete my project. JDev11 open,
  With the help of Versioning, extract project - n change in icons
  Updated a file - no changes in icons
  Committed changes - any changes in the icons
  Opens the project browser web - dav directory - click on a modified file - files shows changes
  Making another change not to table - no changes in icons
  Close and open JDev - no changes in icons
  
  Is there a setting, is this a bug, I have something wrong, is what is happening to someone else, or - what is supposed to happen?
  I would like a visual clue to determine if a file is different from the repository, or which is stored in my local .svn directory on my working copy last save?
  
  Thank you, Ken

  Ken,

  It seems that this is not an authentication problem. Excluded by the proxy settings?

  I had one of our teams using the apache server and give linux a try and reproduce your problem but without success.

  Can you try to compare the configuration of Subversion among the Linux computer and a Windows computer file?

  The Linux configuration file is ~/.subversion/server
  Windows is %USERPROFILE%\Application Data\Subversion\server.
  Special attention for the proxy settings.

  You can also try to create a repository on the same Linux with JDev and testing with file:/// Protocol. To do that use the Versioning JDev-> Subversion-> Create repository command. If it is successful, you can test it against https://svn.collab.net/repos/svn/.

  Rgds

  Susan
  http://www.susanduncan.blogspot.com

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• Laptop stops randomly and gets stuck on the saving settings

  Basically, we have some laptops 10 + this will stop randomly and get stuck on the "saving settings screens.

  Here are the different models of toshiba R500-R600 M10 M9 M5

  We changed versions of bios etc, reimagee them, even used an image of windows xp disc rather than soe.

  Hardware tests OK and customers do not something in particular, some when others when you connect using applications office, back in after a while. Some use docking stations, others not.

  All ideas

  Hello

  Just a question: are you an authorized service provider?
  I ask this question because it looks like you are an ASP because you have so many laptops and you have tested different things.

  It's really hard to say what the reason is for this but I think that in this case, you should contact Toshiba directly. Maybe it s a known issue and it can be fixed in a few minutes.
  So ask for it and wait for a response.

• How to set or change automatic backup settings

  Original title: computer

  My computer makes a noise whirring of laborious struggling. I cleaned with care, but still, it looks like a car that won't start. I'm afraid he's going to die on me and nothing is saved as backup of the island is due this Sunday. Can I replace the Sunday backup in case he dies? Any advice on what has happened to my computer works very well. A bit slow but everything ok my chap of the computer is on vacation until next week.

  Hi Nicky,

  Please contact Microsoft Community.

  If you want to change the time of backup runs, in the time list, check the box for every hour of the day you want your backup to run. Clear the check box for any time that you do not want Backup to run.

  Select one of the following options:

  • Custom. Does not set a default time for the backup to run.

  For more information see set or change automatic backup settings.

  Also as you mentioned that your computer makes a noise, I suggest you check if all cables are tied up and the CPU fan is properly cleaned.

  Meet us, then we can help you further.

• I can't make changes to the settings of Firefox - none of this works

  As usual, when I allow an update firefox Win Desktop, more things gets sacked. God I wish there was an alternative to that shit from ff!

  I can't make changes to the settings of Firefox - none of this works

  It was theme Aeon 7.5 - this is obviously totally redesigned the appearance of the settings options and caused my mouse does not work.

  Thanks for your help - and I'm sorry for the insults.

• How can I change my LAN settings?

  I can't find the tools, is not there. So, how can I change my LAN settings.
  Or where can I find tools?

  You can press the ALT key, or press F10 to display the Menu bar.

  You can also find an Options/preferences button in the bar '3' Firefox dropdown menu button at the right end of the Navigation bar.

  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings

  Hello

  When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings!

  (Note I recently installed DivX player / converter / movies.. .is this the cause?)

  Then... on desktop... .double click on Mozilla... .loads ok
  Open a new tab..it loads Bing! & I hate it!

  Ive tried;

  1.Tools - options - addons - extensions & plugins - cant see anything there?
  2. On the small address bar (top right) which allows search engines to be managed - all cleared down except google & yahoo
  3. Tools - tab mix plus options - New Tabs - Load on new tabs set to Home Page (doesnt let me change it - greyed out url (conduit.com - see 5 below)
  4. Tools - tab mix plus options - New Tabs - Load on new tabs set to new tab Page - displays the url below (5) but if I try to edit it reverts back every time
  5. If I enter "about:config" & then "browser.newtab.url" in the URL bar I get
  
  browser.newtab.url;http://search.conduit.com/?ctid=CT3321897&octid=EB_ORIGINAL_CTID&SearchSource=69&CUI=&SSPV=&Lay=1&UM=5&UP=SP88BDE404-3DB6-49C4-97F5-96A64775CC57
  
  - rightclick on the selection and type 'reset' IT WONT CHANGE
  
  please can you help me?
  

  Thank you

  Stuart

  I see no mention of the duct. com in your initial post. It is often a good indication that you will taken place unwanted software.