Enable WebVPN without granting access to the ASA/AMPS/CLI

Similar Questions

• Grant access to the URI at the time of installation or execution

  Hello world

  I don't know if this is possible, but basically I want to grant access to a URI (URI Web service when executing).

  So, let said customers running our ERP system on the premise, our ERP system comes with the generic web services to access the data of the ERP.

  We want to develop a playbook application that will ask the URI of the Web Service the first time, launch the application. Now, by my understanding, without adding this URI to the access list, the app will not have permission to call any service using the XMLhttpRequest object, right?

  So, how can I add this in the file config.xml during execution? Or y at - it another way to do this?

  Thanks for your help.

  Phuong

  Hello Phuong,

  If all you want to do is to access data from an outside domain and does not allow API access to this area there is an easy trick.

  This gives access to any field.  What it won't let you do, is add WebWorks APIs in this area.  If you need to provide APIs for a domain, you must explicitly set in the config.xml file at

• Access to the ASA 5515 IPS administration

  Hello!

  I can not access the ASA IPS module.

  I try to ASDM. Configuration-> IPS. I type user name and password, see following message: "error connecting to the sensor. Error loading sensor.

  Could you please help me fix my config?

  I have the topology of the network like this

  http://www.Cisco.com/image/gif/paws/113690/IPS-config-mod-01.gif

  My config

  KR - ASA # sh run concert int 0/5

  !

  interface GigabitEthernet0/5

  nameif inside

  security-level 100

  IP 172.33.1.253 255.255.255.0 watch 172.33.1.254

  !

  interface Management0/0

  management only

  No nameif

  security-level 0

  no ip address

  !

  KR - ASA # sh details ips module

  App name: IPS

  App status. : to the top

  App Status / / Desc: Normal operation

  App version: 4,0000 E4

  Flight status data: to the top

  Status: to the top

  License: IPS active Module perpetual

  Mgmt IP addr: 172.33.1.251

  MGMT network mask: 255.255.255.0

  Mgmt gateway: 172.33.1.253

  MGMT access list: 172.33.1.0/24

  MGMT access list: 172.34.1.0/24

  Web to MGMT ports: 443

  Mgmt TLS enabled: true

  !

  KR - ASA # ping 172.33.1.251

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 172.33.1.251, wait time is 2 seconds:

  !!!!!

  Success rate is 100 per cent (5/5), round-trip min/avg/max = 10/10/10 ms

  !

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  !

  Thank you!

  Hi Vladimir,.

  Yups, this is an issue that is seen. Downgrade of Java should solve the problem. If this is not the case, turn on java debugging logs and paste those here:

  Go to control panel-> java right click-> Open-> Advanced-> check all the boxes that appear under debugging and click the radio button to see the console

  Rerun the IDM in browser and collect data in the java console window and paste it here.

  -

  Kind regards

  Sourav Kakkar

• Grant access to the Satellite A100-906 after BIOS crash

  I lost access to my laptop.
  1. I turn on laptop with an attached USB flash drive.
  2 error appeared when the bios loading (TRX error or something like that).
  3. I restart the laptop
  4. I get error BIOS checksum with suggesstion press f2 for bios Setup or f12 for load default settings
  5. I try to press f2 and get dialogue with password request.
  6. I restart the laptop again.
  Now computer laptop view to load OS and bios access password request.
  How can I solve my problem?

  PS. I'm not configure pasword for laptop before. Pwd and pwd startup BIOS was empty.

  Hey man, I don't know what the problem is here, but BIOS password can be removed by only authorized service. He wants the costs you a little, but it can be removed without any problem. On the OS, I'm afraid, you have to install it again.

  BTW: some USB flash drives are password. If you want to have access to the recorded data you must enter the password first. Your key USB also has password protection?

• Labview that is running on a computer without write access to the installation directory?

  Hello

  A client of ours wondered if we can run our Labview executable and runtime on their computer without having no write access to the installation directory?

  It is quite easy to change so that our program writes its log files to another drive on the network, but what the runtime engine and updates Live trying to download programs OR?

  Grateful for any comments.

  As far as I know the terms of access rights for the updates are the same for the basic facilities.

  However, given that your program is running on a factory floor, I recommend disabling updates. I don't think you want to come down because a computer does not have an assembly line update.

• Grant access to the operations of vCenter

  vCOps 5.8.2

  vCenter (untied) 5.5

  After registering via the UI interface vCOps for vCenter Operations Manager role privileges are not listed.

  Update or remove and save the vCenter has not changed this condition.

  

  Someone has an idea? Thank you

  This could me silly, but you please check is all its local group on the server that is used to grant access to users...

  Since builtin roles are not used their might be a chance to use local groups. You can cross check it in tab Permissons.

• Re: [Adobe Creative Cloud] without having access to the full program

  No, it's for a paid monthly subscription where we do not have comprehensive program for software based on the web

  Please see do not have access to the full program

  (Double Post)

• Convert CC CS6 project without having access to the CC

  I have a few CC project that I need to record until CS6, but I don't have access to the CC 2014, 2013 or 2012 if is there any type of free software or online converter that can do this? What I find just shows how to export from AE CC. I don't have the project files.

  If you have a perpetual license on a computer that doesn't run later versions or CS6 then you must ask for help. If you have a CC subscription you have access to all applications of CS6 forwards that are running on your system free of charge.

• AnyConnect VPN is not access to the ASA

  Hello

  I have an ASA 5512 - x configured as a hub AnyConnect VPN, but when I connect I can not access the firewall... I can ping the address 10.4.11.2 but I can not connect... No idea what to do? It's the running configuration:

  : Saved

  :

  ASA 1.0000 Version 2

  !

  asa-oi hostname

  domain xx.xx.xx.xx

  activate 7Hb0WWuK1NRtRaEy encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  1.1.1.1 DefaultGW-outside name description default gateway outside

  name 10.4.11.1 description DefaultGW - Default Gateway inside Inside

  !

  interface GigabitEthernet0/0

  nameif inside

  security-level 100

  IP 10.4.11.2 255.255.255.0

  !

  interface GigabitEthernet0/5

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5.2000

  VLAN 2000

  nameif outside

  security-level 0

  IP 1.1.1.2 255.255.255.252

  !

  interface Management0/0

  Shutdown

  No nameif

  no level of security

  no ip address

  management only

  !

  boot system Disk0: / asa861-2-smp - k8.bin

  passive FTP mode

  clock timezone BRST-3

  clock summer-time recurring BRDT 2 Sun Oct 0:00 Sun Feb 3 0:00

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  1.1.1.1 server name

  1.1.1.2 server name

  domain xx.xx.xx.xx

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  network of the PoolAnyConnect object

  subnet 10.6.4.0 255.255.252.0

  access extensive list permits all ip a outside_in

  list of access by standard tunnel allowed 10.0.0.0 255.0.0.0

  pager lines 24

  Enable logging

  timestamp of the record

  exploitation forest-size of the buffer 1048576

  logging buffered information

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  mask 10.6.4.1 - 10.6.7.254 255.255.252.0 IP local pool PoolAnyConnect

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow any inside

  ICMP allow all outside

  ASDM image disk0: / asdm - 66114.bin

  enable ASDM history

  ARP timeout 14400

  NAT (inside, outside) static source any any static destination PoolAnyConnect PoolAnyConnect non-proxy-arp-search to itinerary

  NAT (exterior, Interior) static source PoolAnyConnect PoolAnyConnect non-proxy-arp-search to itinerary

  Access-group outside_in in external interface

  Route outside 0.0.0.0 0.0.0.0 DefaultGW-outdoor 1

  Route inside 10.0.0.0 255.0.0.0 DefaultGW-Inside 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-Server LDAP protocol ldap

  AAA-server host 3.3.3.3 LDAP (inside)

  Timeout 5

  LDAP-base-dn o = xx

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  novell server type

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication enable LOCAL console

  AAA authentication http LOCAL console

  Enable http server

  http 0.0.0.0 0.0.0.0 inside

  http 2.2.2.2 255.255.255.240 outside

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 inside

  SSH 2.2.2.2 255.255.255.240 outside

  SSH timeout 10

  Console timeout 10

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL cipher aes128-sha1 aes256-3des-sha1 sha1

  WebVPN

  allow outside

  AnyConnect essentials

  AnyConnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  internal GrpPolicyAnyConnect group strategy

  attributes of Group Policy GrpPolicyAnyConnect

  value of server DNS 1.1.1.1 1.1.1.2

  VPN - 1000 simultaneous connections

  client ssl-VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value in tunnel

  field default value xx.xx.xx.xx

  admin Dp4l7Cmqr7SMHl.l encrypted privilege 15 password username

  tunnel-group AnyConnect type remote access

  tunnel-group AnyConnect General attributes

  address pool PoolAnyConnect

  LDAP authentication group-server

  Group Policy - by default-GrpPolicyAnyConnect

  tunnel-group AnyConnect webvpn-attributes

  enable AnyConnect group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  inspect the ctiqbe

  inspect the http

  inspect the dcerpc

  inspect the dns

  inspect the icmp

  inspect the icmp error

  inspect the they

  inspect the amp-ipsec

  inspect the mgcp

  inspect the pptp

  inspect the snmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:9399e42e238b5824eebaa115c93ad924

  : end

  BTW, I changed the NAT configuration many attempts the problem, this is the current...

  YPU need to allow your client VPN address pool (10.6.4.1 mask - 10.6.7.254 255.255.252.0) ssh and http from 'outside' access, which is where they come from. Add them to the:

  http 0.0.0.0 0.0.0.0 inside

  http 2.2.2.2 255.255.255.240 outside

  SSH 0.0.0.0 0.0.0.0 inside

  SSH 2.2.2.2 255.255.255.240 outside

• May not be granted access to the photos on iPhone 5 s

  I have an iPhone with iOS 9.3.5 5s. I'm trying to use an external drive to iXpand of SanDisk to save pictures from the phone. I use the player of iXpand application.

  When I insert the drive and open the app, the app said: "unable to access photo library. Please enable access to your photo library in the application settings. »

  When I opened the settings, Photos is not an option in the parameter of the iXpand player (microphone, camera, and Notifications are listed). When I go to privacy and select Photos (where the Apps that have requested access photos are supposed to be) is listed.

  No idea how I can access this app for my photos?

  Thank you!

  It should be in the privacy settings for photos. You may have accidentally denied permission to access photos when you have installed the app first. If you do not see the player application of iXpand in the privacy settings for photos, try uninstalling the app and reinstall it costs. He should ask to access your photos during the configuration of the application. Grant him permission to access your photos.

• I forgot my Windows 7 password WITHOUT having access to the admin via the fingerprint reader account...

  I forgot my password of Windows 7. I have access to my laptop as an administrator with a fingerprint reader. I would like to cancel or change my password of Win7, but it seems I can't without knowing. Under: Control Panel, user account, change password, need allowing you to type the password before you can change or cancel it. Help! Is there any solution to this? I fear the day jumps to scan fingerprints and I'm stuck on my laptop. Thank you!

  So feel free.  Use your current access to create two new admin accounts & create password reset for them drives.

  If you do not already have, then create a password reset disk for your user account to the daily as well. Alternatively, if it is the one that you forgot the password, create a new user and account & use the admin account to save your data.

  I also write my passwords & keep waste paper in a safe place.

  I suggest two admins like any profile can get damaged.  If a user account profile is corrupt, you can get with an admin account to save the data.  If an administrator account is corrupted so you need a spare admin account to enter to save the system.

  See also repair a profile user corrupted

• grant access to the schema

  Some may give me a script to do the following:
  
  I have a scheme name ABC and I want to give a user XYZ a read access to all objects in the schema of the CBA. IE (TABLES, VIEWS. SWQUENCES etc.)

  Just to emphasize a point that maybe isn't obvious, there are two general approaches that have been discussed - dynamic generation of scripts and SQL scripts.

  Build scripts of scripting occurs when you have one (or several) SQL statements that generate many SQL instructions you have here. It must be a two step process in this case. You spool the SQL statements that you build in a file (a SQL script), and then run the SQL script, that you just created. Simply to generate the script has no effect on the database. The SQL statement that you posted would be part of a script generating approach of scripts, then you must do something like

  SQL> spool my_script_file.sql
  SQL> <>
  SQL> spool off;
  SQL> @my_script_file.sql
  

  The other approach is to use dynamic SQL statements. This is the approach of using EXECUTE IMMEDIATE in a PL/SQL block, i.e.

  BEGIN
    FOR x IN (
        SELECT *
          FROM dba_objects
         WHERE object_type IN ('TABLE', 'VIEW', 'SEQUENCE' )
           AND owner IN ('XYZ', 'PQR' )
    )
    LOOP
      EXECUTE IMMEDIATE 'grant select on ' || x.owner || '.' || x.object_name || ' to ABC';
    END LOOP;
  END;
  

  Dynamic SQL will actually affect the database - you build and run the SQL statements in a single step. This eliminates the need of the coil of the output of the SQL statement in a file, and then run this script.

  Justin

• Enable 3G on GPO Access where the USB mass store is blocked

  How can I go on the activation of 3G access to users where the strategy of corporate domain blocking massive store USB devices?

  I am running Windows Server 2012 as our DC and workstations are Windows 7 and Windows 10.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I disable the Photoshop CS4 on a computer without internet access?  The Office Update to a newer version.

  Hello

  We are to modernize one of our office with Photoshop CS4 installed systems.   This machine has no network connectivity.  How to disable the software and then move it to the new system?

  Thank you

  Contact Adobe technical support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• What is Akamai NetSession customer (users\**\appdata\local\akamai\netsession_win.exe and it's OK to grant access to the network?)

  My mobile provider sent a notice to update my BIOS software, I did.  During automatic reboot, I got a security alert Windows, informing them that Windows Firewall has blocked some features of Akamai NetSession Client on public and provate networks... Allow client to communicate over public and private networks Akamai NetSessin?

  Akamai don't come right out and say, but the reason that netsession is installed on your computer is to allow them to use your computer to 'upstream' content to other users.  By installing NetSession, you allow Akamai use your idle bandwidth to transfer files to other users of Akamai.

  Some of the statements of Detangling: http://www.akamai.com/html/solutions/client_design_principles.html

  "The information that Akamai capture are similar to a web server, and that the information is only used for troubleshooting and monitoring of network performance."  This means that NetSession sends continuously information on your computer to Akamai.

  They say that NetSession will use your computer when it is "inactive or use minimum network resources.".  This means that NetSession is constantly monitor your use of the network and transmit this information to Akamai.  And as bandwidth varies from second to second, this info should be sent upwards to Akamai a lot.  Wait a minute, didn't they say just they captured only the kind of info that capture web servers?  Web servers capture information about the use of bandwidth.  What other information Akamai capture?  I couldn't find details on their site.

  So if you install NetSession, you be to join a peer-to-peer network and allowing Akamai send files from your computer at the time as Akamai may use you your minimum bandwidth.

  I also have a problem of security on the files I get the NetSession.  It seems that it is not difficult to download a file using NetSession, change it to carry a load of viruses and then leave the computer idle and wait NetSession transmit the file infected others NetSession.  I hope that Akamai has taken measures to address this problem, but I can't find any information on it.