change a cluster item value
I have an array of clusters and each group has dozens of controls in there. I want to go through all the groups table and change the value of a specific control. Currently, I use the property value in the array node to get a table 1 d of clusters, a loop through it, unbundling each cluster, change the value of an item, grouping it again in a cluster, and it giving back to the table by using the node property value again. It works very well, but maybe there is a simpler way to do it. With the current method, it's probably using more RAM too because it must copy all the data.
abdel2 wrote:
I noticed, if I change the cluster, for the index of the loop do not connect it to the correct item in the cluster (in this element of the case of a ' # '). I need to rewire it.
I don't know what you mean by that. Can you give an example? Rewiring it how? What is with all this song and dance with the nodes of property value and "insert into array?
Please attach a true VI containing a cluster with typical data as default values. Also include a cluster that contains the desired output. It is usually easier to use "Group by name" because the code is more readable, for example as follows.
Tags: NI Software
Similar Questions
-
Table will not change its forced entry values.
I'm changing the input for a cluster-> table values. They say "adapt to the entered data ', but I can't change them. And when I change on the block diagram they become 16-bit (in blue) instead of 64-bit real (orange).
Thank you
Kevin
Well, this thing was written by a programmer of text, because it has no resemblance to stream, but is written as a text program. Instead of doing a few turorials LabVIEW, he began simply programming as a wild boar in a vegetable garden.
Basically, it says all the "variables" on the left, the bed and written on them through people of the country. As it breaks all data flows, we must add structures from sequence to make things of course run in the correct order and avoid race conditions. Each image is a "statement".
Each local variable requires an another datacopy in memory, so things are not very effective.
See also this discussion.
We also have a long thread on the pitfalls of overuse of local variable. I think I have add this example to him also.
-
Element of change based on the value in LOV
I'm trying to disable the item (text box), based on the value of the LOV. And it doesn't seem to work.
Is it possible to see what is happening in the level of the events? The LOV is perhaps not "changing" ing?
Dynamically change the item values
Patrick Wolf-Oracle responded to the question - get the firebug.
Looking at the console I discovered that the returned of LOV value includes spaces. Resolved issues.
-
Calculation for cutting the first part of the string in the Manager list item values
Hello
Please help me with a calculation after submit pl/sql function process for cutting the first part of the string (CQ.) within the values of list manager. For example the list manager support contains values such as
CQ... SAMPLE1... TEST1
CQ... SAMPLE2... TEST2
CQ... SAMPLE1... TEST2
The calculation process should cut the first part(CQ..) and must return to the list of values of Manager as
SAMPLE1... TEST1
SAMPLE2... TEST2
SAMPLE1... TEST2
Oracle APEX 4.0.2 is the version and Oracle 10 g r2 is the database.
Please help me with possible approaches in the development of the service. Thanks in advance.
Thank you
Orton
orton607 wrote:
But when I insert/update Manager list item values I don't want the first part of the string in the database.
I still don't understand why you can't change the LOV or create a new...
The LOV should be:
SELECT original_value AS HUMAN_SEES_THIS_VALUE ,LTRIM (SUBSTR ( original_value, INSTR (original_value, '..') + 2)) AS DATABASE_GETS_THIS_VALUE FROM ( -- place original SQL for LOV here )
-
Problem with dynamic change a page element value
Hello
I just calculated dynamically the value of an article based on a simple formula which involves the multiplication of two elements of the same page.
To do this, create a dynamic action as follows:
Event: Change
Selection type: Article (s)
Product (s): P19_DURATION
Action: Set value
Fire on page load: TRUE
Type of value: SQL statement
SQL statement: SELECT: P19_DURATION *: DOUBLE P19_RATE
Items to submit page: P19_DURATION
Selection type: Article (s)
Product (s): P19_AMOUNT
When changing the P19_DURATION GET no change in P19_AMOUNT
As my knowledge of javascript is almost zero, I'm doing it with pl / sql or sql. Try dynamic action with a function or a PL / SQL statement and nothing works.
Must use javascript for this?
Searching the forum I think that it is something simple, but I can't find a similar example to what I need.
ConcerningEvent: change
Selection type: item (s)
Product (s): P19_DURATION
Action: Set
Fire on the page loading: TRUE
Set Type: javascript
JavaScript Code:amount = $v('P19_DURATION') * $v('P19_RATE'); $s('P19_AMOUNT',amount);
-
Compensation using Javascript ITEM values
Hello guys!
I try to use javascript in order to clear the item values for multiple items of page at a time using the code below:
The function is called using<script language="JavaScript" type="text/javascript"> function f_setItem (fld) { $x('P1_GEBIETSSUCHE').value = ''; $x('P1_ART_GEBIETE').value = ''; $x('P1_SELECT_ARBEITSSCHRITTE').value = ''; $x('P1_FEDER').value = ''; $x('P1_BIOGEOGRAFISCHER_RAUM').value = ''; $x('P1_VERFAHREN').value = ''; $x('P1_REG_KART_TEAMS').value = ''; $x('P1_ALF').value = ''; } </script>
Of course, this does not. You must override fld with the page element that is supposed to be standing.javascript:function f_setItem(fld);
Can you please show me how the function should be to call the function and clear all values in point?
Maybe this will not only solve this problem but add to my understanding of Javscript routines and calls!
Would be happy to do this before the end of week moved to. :-)
Thank you
SebastianHello
Change it as
And call it as
javascript:f_setItem ();
-
How to get the sub cluster item caption?
Hi all
I have a big cluster, which contains several groups of void. They are all type def. My queation is,
How to get the sub cluster item caption?
Thank you.
Anne
In this nugget , you will find many images that illustrate how to get to items within a cluster. The ideas are the same, you will search for the legend.
Have fun!
Ben
-
How to change the number of values in the hour that are restricted.
Hello
May I know how to change the number of values in the hour that are restricted.
In fact, we have improved of obiee in obiee 11g 10g. Data base is the same for Both.In 10 g the prompt value is limited to show only 35 records per page. As we passed it shows only 35 Records in 11g also. How can I change this limit to 11g.
Please suggest me! Its urgent!
Thanks and greetings
Navnitha
Hello
In the advance tab we have the XML of the upgraded report, copy it into a Notepad and try to find the line beginning as below
In 10g, we have something like below, simply remove the choicesPerPage = '35' from 11 g OBIEE XML report
Thank you
RAM
-
A statement UPDATE changes the line if the update changes the column even value?
HI -.
I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211
Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.
My goal is to load the audit table data if the value in a cell in the main table is really have changed.
A statement UPDATE changes the line if the update changes the column even value?
Best regards
I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211
Why?
You try to resolve what made you what are the PROBLEM that select as the solution?
Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.
Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.
He is not able to determine that the value is the same.
I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.
My goal is to load the audit table data if the value in a cell in the main table is really have changed.
OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.
A statement UPDATE changes the line if the update changes the column even value?
It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.
But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.
Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.
-
Change the Cluster size in drive with VM-converter
All the morning
We'll probably replace our storage environment with that provided by a new provider.
Our current provider has a recommended 4 k Cluster size. So all our VMDK is configured with a cluster of 4K, size happy days.
However, the new seller we recommend 8 k.
So I thought v2v ING our server domain to the new platform, change the size of the block in the Advanced tab of VM-converter in the process, which gives us the system formatted with 8 K blocks.
There is however a Requirement MS that the system drive is 4 k (otherwise it wont power on). Its this little pesky 100 MB partition...
Now comes the rub;
The 100 MB system partition, part of the first drive (C:\). If I P2V the first drive with a cluster of 8 k size I of course get a non bootable server.
When in fact I want actually to v2v 1 drive (C:\). As 8 KB, but leave the small single 100 MB system partition with the default of 4 k, however because they are part of the same disc, and converter seems to work at a disk level and not the level of the Partition, converter just wants to make all that is a problem.
Any ideas on how to accomplish the foregoing.
See you soon
P
Hi there mate
Sorry for the delay, we are testing at the mo and I could not devote much time to this.
Any ways I cracked it, I was testing on a 2 k 3 box where something like minitool would be necessary to finish the change of cluster size in the C:\ for the reasons given.
But when v2v - ing (with VM converter) a k box 8 or 2012 2 the system partition is presented to the converter as an independent drive and can therefore remain @ 4 k while the C:\ D:\ etc. can be adjusted as required using the advanced settings.
So in the end, you have a system with drives using the required cluster size and a system bootable...
just for future reference should it be useful to anybody.
P
-
HelloWhat is the difference btw: block.item and $item.block.item.value in the customization of the form State section
I've seen this condition as
triggering event
the point at which instance
: PRESS RELEASE. PICKING_RULE not in the ('US_CB_1', 'US_CC_1', 'US_CA_1', 'US_CU_1')
and
When the point instacne
${item.release.picking_rule.value} not in ('US_CB_1', 'US_CC_1', 'US_CA_1', 'US_CU_1')
the two are the same or different
Thanks in advance
In the particular example that you use, no difference, you are getting the value and comparing it with a set of values.
The second form of the syntax, however, take into account what follows, while the first only retrieves the value of the field:
Conditions can refer to properties of objects using a SPEL (simplest Possible Expression Language) syntax. For example, allows you to create a Condition that tests whether a field is displayed or not. These expressions take the following general form:
${objectType.objectName.Property}
Internally, the expression of SPEL is a cover for Oracle Forms builtins like GET_ITEM_PROPERTY, GET_BLOCK_PROPERTY, etc. In addition, expressions of SPEL are supported recovery values of profile, the dictionary of text messages and local Variables (described later).
-
error message Popup on change based on the value of selectlist
Hello
I am new to Oracle Apex. I have a selectlist in my page. I need popup, an error message when the value is changed according to the value of selectlist. For example, the selectlist can have "Approved", "Rejected", "Started", value "not started". When I changed the value "Rejected" if it is already "approved" a popup/inline error message should appear and say that we cannot change "Approved" to "rejected". Similarly, I need to have 5 these validations on the fly (when the selectlist is changed). Also when the condition is the error value will not change (in the previous example, the value will not change to 'Rejected'). Is there a way to do this?~ Best regards,.
Nadège
Hi Jeevin,
You can use jQuery or Javascript to manage validations customized to your selection list onchange.
Something like
OnChange = "your_custom_function (this.value); »
and you can define your function as
function your_custom_function (value1)
{
If (value1 == "Rejected")
Alert ('Test Alert');
}
Logic may be all you need.
It may be useful
Thank you
Sunil Bhatia
-
I have a doubt about the creation of input for an item values.
There is a checkbox for 'point database' when you set the input value.
What is the exact use of this box?
I mean even if it is not checked that we select these input as entries in a quick formula values.
(for example. The entries are BASIC_SALARY)
What happens if you want to use the value of the entry element in another entry value formula.
A formula is not attached to your current item.
It's when you use ELEMENT_NAME_INPUT_VALUE_NAME_ENTRY_VALUE
Check-
Select * from ff_database_items
where user_name like '% ENTRY_VALUE ';
See you soon,.
Vignesh
-
How to choose the item value list based on another value of list item
Hello friends,
I have two list items named xxx and yyy... OK, my problem is I want to choose a value of yyy list item based on the value of article xxx...
Example: I select 'Computer' in xxx... Based on this I want to choose the item values in yyy as a monitor, keyboard, mouse, etc... This must be done at run time. How can I do this... Give me a few examples of code [pls tell me trigger appropriate to place this encodings]
Thanks in advance,
BattistelliVery simple to use the LOV and query of the lov which is attached to the YYY field, use the query as below...
SELECT columns FROM table WHERE column_name = :XXX_FIELD
Use the ENTER OF LIST Yes property for the YYY field.
-Clément
-
Lov popup when select change the item values
Hello
I have a Lov Popup to select cities, once I've selected one city, he must find the departmental and national names to display on the fields "view only".
I tried to create dynamic Action that fires on 'change' to my Popup Lov and run this code:
Is there a "correct" way to do it? What Miss me?DECLARE V_UF UF_ATM.SIGLA%TYPE; V_PAIS PAIS_ATM.DESCRICAO%TYPE; CURSOR C_CIDADE IS SELECT U.SIGLA UF_SIGLA, P.DESCRICAO PAIS_DESCRICAO FROM PAIS_ATM P, UF_ATM U, CIDADE_ATM C WHERE U.ID(+) = C.UF_ID AND P.ID(+) = U.PAIS_ID AND C.ID = :P9_CIDADE; BEGIN OPEN C_CIDADE; FETCH C_CIDADE INTO V_UF, V_PAIS; APEX_UTIL.SET_SESSION_STATE(':P9_UF', V_UF); -- I already tried :P9_UF := V_UF APEX_UTIL.SET_SESSION_STATE(':P9_PAIS', V_PAIS); CLOSE C_CIDADE; END;
Thank you
Alan.Hello
OK - I added another page to my sample application: http://apex.oracle.com/pls/apex/f?p=56976:13
Dynamic action would not work because the value that changes is in a hidden item - P13_EMPNO * _HIDDENVALUE * and you can not target it in Action. I used jQuery to attach an onChange function instead.
Andy
Maybe you are looking for
-
A matter of $ million I have a new W500 which should arrive soon, it is pre-loaded with Vista Ultimate, my current T42 has XP and all my applications run on XP, I have tested with a slow R backup series and were able to get 99% of my apps to work. Sh
-
Safari will not save history, and will not, leave only force quit
My Safari will not save history and will not leave. If I try to quit, nothing happens then a window opens upward with an error message and I have to force quit. Safari will not leave for an update of the system either.
-
LaserJet 5000: LaserJet 5000 N Mac
This printer has always been on my small business network, but all of a sudden and without change apparent to the establishment, is not printing. Once I sent to print the following message: The printer does not exist or is not available at this time
-
BBM works does not in a Simulator
Hi all, I am fairly new to the Blackberry 10 development, I started the Simulator and tested if BBM works, I followed all the steps requred to make it work but I get "temporary server error, please try again later", I looked through all of the thread
-
DBMS_AQ. DEQUEUE multi single consumer thread
Hi allI have a table of Q for advanced queue. The line runs for a single consumer.Currently, I have four tasks at the same time of waiting for the messages of the qtable above with the following properties. DECLARE dopt DBMS_AQ.DEQUEUE_OPTIONS_T