Change an account name changes the folder of the corresponding user name

Similar Questions

• = > Windows XP: change the way users log on or off < =.

  Using Windows XP.  I'm trying to "changes the way users connect or offshore."  When I click on this option, I get the error message * a recently installed program has disabled the Welcome screen and the fast user switching.  To restore these features, you must uninstall the program.  The following file name can help you identify the program that made the change: SGGINA. DLL * the computer belonged to my brother... can someone help me please?  I just want to be able to have 2 separate user accounts.  Thank you.  Oh yes, when I turn on the computer, I get the newspaper protected password on screen and am not able to view both of my user accounts!

  Using Windows XP.  I'm trying to "changes the way users connect or offshore."  When I click on this option, I get the error message * a recently installed program has disabled the Welcome screen and the fast user switching.  To restore these features, you must uninstall the program.  The following file name can help you identify the program that made the change: SGGINA. DLL * the computer belonged to my brother... can someone help me please?  I just want to be able to have 2 separate user accounts.  Thank you.  Oh yes, when I turn on the computer, I get the newspaper protected password on screen and am not able to view both of my user accounts!

  SGGINA. DLL is Sophos SafeGuard Disk Encryption.  You have to be careful to play with disk encryption, or you may end up not being able to access your drive at all.

  See the following article from Sophos to disable the SGGINA, but I had read up on Sophos SafeGuard Disk Encryption first to see if it has been set to encrypt anything and if so how to make sure you have the decryption key (or ask your brother):http://www.sophos.com/support/knowledgebase/article/109231.html

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• Change the shared user using Java API Service

  Hi Experts,
  
  I have successfully run the example of classes Java from here: http://docs.oracle.com/cd/E17236_01/epm.1112/epm_security_api/frameset.htm?ch01s03.html
  And I need to change the code of UserFunctions.Java.
  
  UserFunctions.Java, I can create, edit, and delete a user.
  But in this sample program, when I want to edit a user, I should create a new user first.
  
  My requirement is I want to change the existing user passing the parameter when you run the program.
  So, when I want to launch the program, it should be like this:
  Java UserFunctions 'method' 'username', 'password', 'email', 'first name', 'last name '.
  
  FYI, I can create a user in passing the parameter as I mentioned above.
  But to edit a user, I still can't do it.
  
  Please find my codes below:
  
  public CSSNativeUserIF createUser (String username, String desc, String firstname, String lastname, String email, String pass) throws CSSException
  {
  The user CSSNativeUserIF = null;
  HashMap context = new HashMap();
  user = cssDMAPI.getNativeUserInstance (context, main);
  user.setLoginName (username);
  user.setDescription (desc);
  user.setFirstName (firstname);
  user.setLastName (lastname);
  user.setEmailAddress (email);
  user.setPassword (pass);
  cssDMAPI.addNativeUser (main user, context);
  
  return the user;
  }
  
  ' public void modifyUser (String username, String desc, String firstname, String lastname, String email, String pass) throws CSSException
  {
  The user CSSNativeUserIF = null;
  HashMap context = new HashMap();
  
  System.out.println ("Edit description user...");
  user = cssDMAPI.getNativeUserInstance (context, main);
  user.setLoginName (username);
  user.setDescription (desc);
  user.setFirstName (firstname);
  user.setLastName (lastname);
  user.setEmailAddress (email);
  user.setPassword (pass);
  cssDMAPI.updateNativeUser (main user, context);
  
  }
  
  -------
  
  in the Sub main():
  
  If (method.equals ("create"))
  {
  / * Create a native user * /.
  cu.printMsg (System.out, "- creating a user-" "");
  user = cu.createUser (username, desc, firstname, lastname, email, pass);
  cu.dumpUsers (System.out, "the user is created successfully," new CSSNativeUserIF [] {user});
  }
  ElseIf (method.equals ("update"))
  {
  / * Change native user * /.
  cu.printMsg (System.out, "- update a user-");
  cu.modifyUser (user name, desc, firstname, lastname, email, pass);
  cu.dumpUsers (System.out, "the user is updated", new CSSNativeUserIF [] {user});
  }
  
  Could you please help me with this?
  
  Thank you and best regards,
  
  Christophe

  Try this

  CSSUserIF [] usrs to = cssAPI.getUsers (context, principal, sLoginName);

  If (usrs.length > 0) {}
  CSSNativeUserIF natUser1 = (CSSNativeUserIF) usrs to [0];
  natUser1.setLoginName (sLoginName);
  natUser1.setFirstName (sFirstName);
  natUser1.setLastName (sLastName);
  natUser1.setEmailAddress (sEmail);
  natUser1.setDescription (sDescription);
  natUser1.setPassword (sPassword);

  cssDMAPI.updateNativeUser (context, principal, natUser1);
  }

• Windows 7 action center > security > I can't change the uac user account at the level of the control window freezes / uac rest!

  PROBLEM: ACTION CENTER > SECURITY > USER ACCOUNT CONTROL FREEZES AND REMAINS OFF - I CAN'T CHANGE THE UAC LEVEL. When access to the center of the Action (Windows 7-32 bit) > Security > UNDER USER ACCOUNT CONTROL IS OFF > said UAC will be NEVER NOTIFIER > and below it in blue is the option to click on "Choose your level of UAC" > I click it and it opens a window "DECIDE if he MUST BE INFORMED of CHANGES to YOUR COMPUTER" with a feature of landslide to choose the level > I DRAG to ALWAYS NOTIFY ME AND EACH TIME the SCREEN is IT FREEZES LET ME HIT OK - so I can not change this setting. It won't let me change to always warn me - the recommended setting, and I can't go beyond that! The window closed either! I'm trying to close the window by clicking end task in Task Manager - it takes several attempts before / if it can close this frozen window... BUT THE KEY IS THAT I CAN'T CHANGE THE UAC LEVEL - THE SCREEN FREEZES AS SOON AS I GLIDE TO ALWAYS WARN ME - HELP? * NOTE: a few times after the Task Manager tried to close the window without success, I saw a box pops up that says: Manager of COM surrogate has stopped responding... he tries to fix - as if Windows stops responding, and he tries to recover or fix the problem. I would like any help or information please, as to why I can't change this setting, even after I give an administrator password, you are prompted, to say good make - when I am logged in as a standard user. Help? Thank you!

  Hi Shellzak,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not change the UAC settings on the computer and the system hangs. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  Did you of recent changes to the computer before the show?

  I suggest the following method and check if it helps to solve the problem.

  I suggest you try to activate UAC from the command line and check if it helps.

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) run this command

  Reg.exe ADD HKLM/v EnableLUA /t REG_DWORD /d 1/f

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Impossible to change the administrator user account picture?

  Just create new pc with Windows 7 Professional. But can not change user account for my own image using the Browse tab?

  I have on my old pc Windows 7?

  Tried changing the setting 'Apply the default user logon picture' in gpedit does not?

  Kind regards

  Hi Davy,.

  You are the administrator of the account?

  As you have tried the default user logon image, create a new user account can help you determine if the problem is related to the corruption of user account.

  Otherwise, sign in with the account that has administrative rights and try to change the image.

  Create a new user account and check if the problem persists, if the problem does not persist in the new user account, then you can fix the damaged user account.

  Create a user account

  Difficulty of a corrupted user profile

  Click on the link mentioned below as a reference:

  http://Windows.Microsoft.com/en-us/Windows7/choose-a-picture-for-your-user-account-and-start-menu

  Answer please if you have any questions.

• My creative cloud LightroomCC my Presets in my pictures files and I want to change the C:\Users\Frann-Serenity\AppData\Roaming\Adobe\Lightroom\Develop file.  I think it takes to develop, but not sure. I don't know how the Lightroom folded

  I think that the presets should be installed in the C:\Users\Frann-Serenity\AppData\Roaming\Adobe\Lightroom and perhaps even deeper in the folder to develop. I'm not sure because I'm a newbie at this. I have no idea how my Lightroom file put in my C:\Users\Frann-Serenity\Pictures.  I have to install Presets but cannot get to work because they land in my pictures folder.  Any help would be appreciated. Thank you

  Hi FrancieLou,

  The presets are stored in images when you have an option enabled in Lightroom preferences.

  So, if you do not want them to be stored in the pictures folder, you must follow the steps below:

  1. go in the Lightroom preferences > Presets tab

  2 uncheck "save stations with this catalog" and click Ok.

  Then, the presets would be stored in default C:\Users\UserName\Appdata\Roaming\Adobe\Lightroom\.

  Kind regards

  Claes

• How to change the administrator user

  My brother has changed the only account on my computer a regular account, and now because of this I can not install stuff etc, because I'm not an administrator, and I can't change my account type because only Admins can do that and I tried allow the all-powerful administrator user , but I can't, advice on how to solve this problem?

  Try to start in safe mode. If and only if there is no administrator account Windows won't allow the master account administrator mode without failure.

• OIM11g how to change the default user search results?

  oim11.1.1.5.4
  
  The user admin Console.
  Tap of the administration, is the default value for user search results: display name. How can we change it other attributes, such as user login?
  
  TIA
  GA s/n

  Go to advanced--> user--> Actions--> the Configuration Configuration search--> search Simple: Serach attributes...

  In this display name is selected first and foremost... You can delete display name, first name and family name and leaving the user only login...

• Tracking change the sys user actions

  I use Oracle 10.2.0.3
  
  Is there anyway I can follow change the user account unlock or take into account the lock instructions?
  I need to update the table with the username when account unlocking or locking operations is performed.
  
  I know audit_sys_operations auditera sys operations and write them to a file but it will not help my problem since I want to update a table when the unlock operation account is made.
  
  I can't create trigger on table $ USER because it is a table of the sys user.
  
  Is there another way to track and update the table?

  It looks like you want a trigger on the event alter at the database level. See the first line of [table 9-4 | http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14251/adfns_triggers.htm#CHDGIJDB] which indicates what attributes are available inside a trigger on the ALTER event. From there, take a look at [table 9-2 | http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14251/adfns_triggers.htm#CHDCFDJG] which describes each of the available attributes.

  Since you are interested in changes to the users you probably want to test only the attribute ora_dict_obj_type = 'USER '.

  Further you can must use the attribute ora_sql_txt function which is available according to table 9-2 to inspec the actual SQL that was used to change the user data dictionary.

  You probably want something like this (note that this is not tested):

  CREATE or replace TRIGGER ALTER_USER_TRG
  BEFORE ALTER ON DATABASE
    l_stmt varchar2(2000);
    l_sql_text ora_name_list_t;
    n number;
    l_action VARCHAR2(50);
  BEGIN
    if (ora_dict_obj_type = 'USER') THEN
      n := ora_sql_txt(l_sql_text);
      for i in 1..n loop
        l_stmt := l_stmt || l_sql_text(i);
      END LOOP;
  
      if regexp_like(l_stmt, '(un)?lock', 'i') then
  
        null;
  
      end if;
  
    end if;
  END;
  

• Change the Simple user interface for 2 Sockets example

  Hi gentlemen, I'm changing the sample application "simple labview UI" taking two, but after I did probably, I just second requeteexecution displays the socket running frist requeteexecution left blank (grey). attached the picture. Relatively, the drop-down list on top of the requeteexecution box is also empty. (However, if you click the drop-down list and select right sleeve, the first requeteexecution appear right by running the sequence). Please someone check my code to see my mistakes, thank you.

  I tried to integrate this code and it works very well with a parallel sequence in the example.  Specifically, look at my implementation of 'DisplayExecution event Callback.vi.  I hope that this solves your problem.

  Pulido Technologies LLC

• passwd change the OS user.

  Hello
  
  Our administration system ask me said he will change the passwd root and oracle (oracle owner) user. Are there addictive about the database or any other matter which could be face a dba?

  If its unique database---> no.
  If its Real Application cluster---> you have to reconfigured ssh.

  Similar thread
  User OS password Oracle RAC environment change

• SQL script to change the database user

  Oracle 11g on Solaris 10.5 64-bit SPARC
  
  I work on generate a SQL script to change all default users to a new or custom password.
  Example: change the system of the user identified by new_password
  
  Problem:
  My problem is that I don't want the 'new_password' be in plain text, because the script will on the ground prior to deployment.
  Can anyone give me some suggestions?
  Is this doable or I can generate the already hashed password - as change User Manager idenfified < hash_characters >
  
  Example change manager users identified by 'HE5823WE4095432241252 ';

  You can use the hashed password if you say for example:

  change the system of the user identified by values 'hashed_password_string '.

• Change the public user nobody

  Hello
  Is it possible to change the text for the user "nobody" to something like "public" when a user is not connected.
  
  Ben

  Well, thanks to Google, I know what TDF and who's Thor ;)

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• How can I change the suggested user names?

  When I connect to one of my frequently used web pages I get a proposed username is irrelevant to this page. How to change or remove the username suggested?

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list
  3. Press the DELETE key (on a Mac: shift + delete) to remove it.
  • http://KB.mozillazine.org/Deleting_autocomplete_entries