Change block tracking and comments defrag?

Similar Questions

• Barracuda Backup - changed block tracking does not properly

  Greetings,

  
  

  What is going on:

  In a Word. I am trying to solve a problem with a backup of Barracuda and the block change tracking.  It happened from the server (as well as the Barracuda 190) has been installed long ago.

  
  

  Long story short. With CBT activated (changed block Tracking) Barracuda is supposed only to save "disk blocks has changed."  She doesn't at the level of virtualization, no comments. In my case, it's back up about 124 GB every night. (2-3 hours of the device), and then from 10 to 12 hours to move to the cloud.

  
  

  MY SYSTEM:

  There is only 1 VM (comments) on the host computer. The two drives on the computer virtual (comments) are a 60 GB drive OS (SBS Server Essentials of 2012) and 100 GB data disc.  Both have 33 GB used on each of them (66GB total).  Changed nightly expected data should be an absolute maximum of 6-8 GB each night much less commonly.

  Nothing about the host OR virtual machine (guest) server is added to the 124 to 128 GB that says Barracuda is saved.

  
  

  HOW CAN I KNOW IT IS NOT WORKING PROPERLY? :

  I have two other systems in separate buildings that work as expected. So, I have an A, B, C comparison.  A and B are working properly. C is not.   They are all the same hardware platform HP ML350p Gen8. They are all configured as except for the sizes and quantities of drives in the RAID 5 group. They are all ESXi if the one in question is on 5.1.0, and the other two are on 5.5.0.
  

  
  

  Not that it matters, but the guests on these systems are: host a system has a brand new 2012 R2 STD Server .  B host has a system "autonomous converted" SBS 2011 .  C host system has a new 2012 Essentials server.

  
  

  WHAT DID I TRY? :

  I made sure all the settings in the settings have CBT enabled and set to true.  I tried to re - set up a new selection of backup within the Barracuda 190. I made contact with technicians Barracuda of 1st and 2nd level support on several occasions. Initially, they said it was a problem of snapshot.  I looked the better shots I knew how (I'm a noob, but I got some great info here about how to look at snapshots and VM running of stains from p_hall), then when they couldn't tell me where in the phase of snapshot, it was, they said 'it works as expected. , (and even if I have only 66 gb of disk space used on a total of 160 GB on reviews) "isn't really 125 GB backup every night. It just reports that it is.  Still my bandwidth says otherwise.   WHAT !!!!!!!!???????

  
  

  Finally, I took the well-known Barracuda of the FD (from system B Barracuda) and put it on the DP (in lieu of system C Barracuda) for a few nights.  He behaved exactly like original C system Barracuda. He supported 128 and about 147 GB the first night the next two nights.

  
  

  See attachment for samples of the reports at the end of last year backup 3 systems. Yes, they are older, but the results are the same.

  
  

  Any suggestions on how to fix this?  Thank you.

  
  

  I want to mention that my problem is now solved. Still using CBT, my nightly backups are more in line with what is, was expected.  Instead of backup 128 GB EVERY night (I still don't know whence the figure), I support anywhere from 3 to 15 GB per night.  A difference.

  The problem has been resolved with a simple upgrade to ESXi 5.1 to 5.5 upd 2.  No other changes made.

  Wouldn't be an accurate assumption that unlike VM KB 1020128 that CBT is, in fact, NOT compatible with the ESXi5.1?

  I'll be the first to admit that VMWare is not my forte.  That said, I'm rather discouraged that there no one answer to my post with suggestions.  I post in the wrong place. Poor choice of title/key words? It was poorly made? Unintelligible?

  According to me, that I was very thorough in my research on the issue.  I found this which mentions clearly the CBT is supported in ESXi 4 and more.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1020128

  I was diligent in troubleshooting up to the point where I pretty much dismissed everything except the host operating system.

  Not knowing how big the community is, I would think that there is someone out there with my exactly the same problem, or at least there was someone out there who was successfully in 5.1 ESXi with CBT on a system of Barracuda.

  I am open to any suggestion that may make future messages/questions to gather more responses.

  Thank you.

• Regarding the change block track file...

  You have a question: (for the 10G database)
  
  The four statements about the track of changing block file are correct? (Click on four).
  
  The location of this file must be different from that of the database files.
  (B) the minimum size of this file is 10 MB.
  C. the maintenance of this file is fully automatic.
  D. The Oracle database files block change information in this file by default.
  E. the view BLOCK_CHANGE_TRACKING V$ contains the name and location of this file.
  F. the changed blocks are followed in this redo file is generated.
  Answer: B, C, E, F
  
  another answer is: GOS.
  
  so C and D, which is right?
  
  Thank you
  
  Published by: 795980 on December 8, 2010 14:37

  D is undoubtedly true... after that you are on your own.

• Can you Adobe Acrobat help with import of tracking changes and comments in Microsoft Word and convert these annotations and comments in PDF format?

  I have a Word doc huge with more than 3,000 of the changes and comments to track changes. I hope that there is a way that Adobe Acrobat can simplify the conversion of annotations and comments of an annotated PDF file in just a few steps - vs having to do this work manually. Appreciate the tips and recommendations! Thank you!

  Acrobat and Word are quite different types of applications. Namely, Acrobat isn't a word processing application, although many people think that it is and try to use it as such. Therefore, I don't think that this is possible. Annotations in the PDF file are nothing like the changes you can make in a Word file, or vice versa.

• VMware CBT (tracking changes block): ctk files and multiple backup systems?

  Hello

  We have 2 datarecovery running backups of the SAME virtual machines, but on the other day.

  Later, we will have a dedicated backup solution, so we will use only 1 VDR + external backup system.

  The external backup system use CBT too.

  Now my question is: how CBT done when several backup systems require "that is the last blocks changed since the last backup?

  I mean if I run Sunday, on the same VDR2, VMs and VDR1 Saturday to VDR2 always have only the changed blocks from Saturday to Sunday and the blocks changed the week lack? !!!

  Could someone provide me a technique explaining the depth of the CBT mechanism?

  Thank you

  Yes, once a block is modified the corresponding location in the mapping file is labeled with the new changeID.

  André

• can not see the stars of review and comments from clothing sites

  E.g. #1 = 'Landsend.com', click on 'man', 'pants '.
  http://www.landsend.com/IX/mens-clothing/men/mens-pants/index.html?SEQ=1 ~ catNumbers = 1 & 2 ~ 23 & visible = 1 ~ 2 ~ 1 & cm_re = D-4-8 & pageSize = 72

      Can see pants and pictures, but where the usual 1-5 *s are, it says "Rating".  I click on the "Men's Pleat Front Traditional Fit No Iron Dress Twill Trousers" (the first pants picture/option, Item # 426850-A61) and up pops all of the information EXCEPT the photo/s that should be on the left, and the "Views + Reviews" with all of the comments under that.
  

  For example #2 = "underarmour.com', 'Man', 'Accessories', ' Backpacks and bags ', 'AU Hustle Storm backpack.
  http://www.underarmour.com/shop/us/en//pid1238440-040#BV-reviews

      Can see    "****1/2* (2) Read All Reviews"   but the reviews are missing and when I click on "Read all Reviews", the screen moves down, but nothing else changes and the reviews are not there.
  

  For example #3 = "eddiebauer.com', 'Man', 'Shirts',"Classic Fit legend wash Oxford Shirt - solid short sleeve"
  http://www.eddiebauer.com/EB/men/shirts/index.cat

      Under "Men's Shirts", I see the stars and how many people have rated it [ex.- *** (17)].  If I click on the ratings/stars or on " Classic Fit Legend Wash Oxford Shirt - Solid Short Sleeve", the next page shows up-
  

  http://www.eddiebauer.com/catalog/product.jsp?ensembleId=44679 & & categoryId = 9 & categoryName = SHIRTS & pCategoryId = 2 & pCategoryName = MEN & gpCategoryId = 1 & gpCategoryName = EB & catPath = ~ ~ categoryId = 9 ~ ~ categoryName = SHIRTS ~ ~ pCategoryId = 2 ~ ~ pCategoryName = MEN ~ ~ gpCategoryId = 1 ~ ~ gpCategoryName = EB & viewAll = n & pg = 1 & cmPathInfo = null

     ...however, the stars, ratings, and comments are not there.  The picture/s of the shirt are there, as well as the size, color, add to bag, etc.
      On Amazon, I can see the ratings and comments.  This tends to be a problem with clothes companies and their customer service has not been able to tell me why I can't see what should be there.  Internet Explorer Does show the missing info; I haven't tried Chrome.  I want to work with Firefox.  Any suggestions?
  

  On the first page, next to the marking of Word, I get five sailboats (blue is good, gray is not good). This image comes from the external site "landsend.ugc.bazaarvoice.com." You can see the images if you load them directly? Here is an example: http://landsend.ugc.bazaarvoice.com/2008/2_8/5/rating.gif

  When I click through to the pants, the first image that shows on the left is this one: http://s7.landsend.com/is/image/Lands.../426850_AJ13_FF_KHA?fmt=jpeg, rgb, qlt = 80, 1 & op_sharpen = 0 & resMode = sharp2 & op_usm = 0.5, 1, 3, 0, & icc=sRGB%20IEC61966-2.1,relative & iccEmbed = 1 & rgn = 0, 0, 2000, 3000 & scl = 5.882352941176471. If you click on it directly, it works?

  If you are unable to view these images directly, sites can be blocked. Check out the first section of this article: the problems that cause to not show images.

  If you CAN not display these images directly, but not when they are incorporated on the main site of Lands End, you may be blocked "third party" images. You can check here:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste perm and make a pause so that the list is filtered

  (3) if the value is not 1 (and the line is in bold), click permissions.default.image , then click Reset.

  If the above fails, it could be a problem to Add on. Could you try Mode without failure of Firefox? It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe help

  Help > restart with disabled modules

  In the dialog box, click on 'Start mode safe' (not Reset)

  Any difference?

• Bootcamp (Win10) has not started after you changed the partition and updated at El Cap.

  I have a MacBook Pro (retina, 15 inches, end of 2013), 2 GHz Intel Core i7 with 8 GB of Ram.

  I had 2 system installed, Win 10 + Yosemite from the windows of beginning and the use of most of the time.

  Yesterday, I ran out of disk space and passed the partition in OS X with disk utility.

  While I changed the partition and I also upgraded to the El Cap.

  After all, I can't start by winning 10 more, although I could see my windows in the startup disk Control Panel.

  I checked some thread here and mess with command autour terminal, but nothing has worked for me.

  Here is the result of diskutil:

  Jerbins-MacBook-Pro: ~ the jerbinyuan list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 70.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base BART 30.0 GB disk0s4

  5: Microsoft database HOMER 150,0 GB disk0s5

  Jerbins-MacBook-Pro: ~ list of cs jerbinyuan$ diskutil

  No logical volume group CoreStorage found

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 136992184 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  137401824 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  768 138671360

  138672128 58595328 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  197267456 292966400 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-136992184] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [137401824-1269536]

  4: 0 b 1023 254 63-1023 254 63 [138672128-58595328] Win95 FAT-32

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  00000000 2nd eb 58 90 42 53 44 20 20 34 34 00 02 20 20 00 | X.BSD 4.4...  .|

  00000010 02 00 00 00 00 00 00 20 00 f8 ff 00 00 f8 43 08 |... C. |

  18 00 00000020 7th e0 03 37 00 00 00 00 00 00 02 00 00 00 |... ~... 7..........|

  00000030 01 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  00000040 80 00 29 11 14 2f 2 a 42 41 52 54 20 20 20 20 20 |..) ... / * BART |

  00000050 20 20 46 41 54 33 32 20 20 20 31 c0 d0 bc 8F fa |  FAT32. 1... |

  00000060 00 7 c fb 8th d8 e8 00 00 83 19 bb 07 00 fc 5th c6 | | ......^.......|

  00000070 c0 ac 84 74 b4 06 0e cd 10 eb 30 cd 16 cd e4 f5 |... t... 0....|

  00000080 19 0D 0a 4th 6f 6F 2d 73 79 73 74 65 6 d 20 64 69 |... Nonsystem di |

  00000090 73 6B 0D 0 a 50 72 65 73 73 20 61 79 20 6 6 b 65 | SK... Press any ke |

  000000a 0 79 20 74 6f 20 72 65 62 6f 6f 74 0D 0 a 00 00 00 | is reboot... |

  000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  *

  000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |... U. |

  00000200

  Jerbins-MacBook-Pro: ~ jerbinyuan$ diskutil info/dev/disk0s5

  Identifier of the instrument: disk0s5

  Device node: / dev/disk0s5

  Set: No.

  Part of the whole: disk0

  Device / media name: BOOTCAMP

  Volume name: HOMER

  Gendarmerie: Yes

  Mount point: / Volumes/HOMER

  Personality of file system: NTFS

  Type (Bundle): ntfs

  Name (Visible to the user): Windows NT (NTFS) file system

  Partition type: Microsoft Basic Data

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID: 4EC75B8E-02A8-4B26-B7F3-5EA9D0A47FA9

  Disk / Partition UUID: 776C43C1-7E4C-4997-BDF5-A91FD406DEBD

  Total size: 150.0 GB (149998796800 Bytes) (exactly 292966400 512-Byte-units)

  Amount of free space: 18.5 GB (18479718400 Bytes) (exactly 36093200 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: Yes

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Thanks for help.

  Please follow the steps described in [help] can not boot Windows (8.1) after partition resizing .

• IPHONE 6 changes of date and time automatically to 2032

  Hi all

  I have 6 IPhone which was working fine but all of a sudden the date & time has changed & is showing as February 12, 2032. Due to which my calendar screwed up & none of the applications work as he gives certificate error. Currently it is running on IOS 9.1, but I tried the Update 9.2 but unable to which I think because of the wrong date. I tried manually change the date and the year after the scroll that is the * feature it goes until 2018 and then directly jumps to 1970, loan, I am unable to set manually also.

  Please help me on this point, I'm completely blocked

  Kind regards

  Khurrath

  Go to settings > general > language & region > calendar and set your Gregorian calendar. It's somehow gotten on Buddhist.

• No sound in windows after Eula download and cannot defragment error not draggable

  No matter what I tried to do research on my E - 310 Dell Deminition under his, it is blocked by this thing, and I have no idea what or where he comes. I can't delete it or if I can defragment my system and he at a stand still. I am still able to login. My firewall are all ok? What can I do? Kat Williams
  

  OT: Microsoft Download "EULA" on my computer windows pro now, I have "no sound and cannot defragment not draggable error? Heelppp!

  Hello

  1. what operating system is installed on the computer?
  2. What is the accurate and complete error you get when you try to remove or defragment?
  3. What do you mean "she is blocked by this thing and I have no idea what or where he comes. I can't remove it '?
  4 EULA which have you downloaded?
  5. what you are trying to delete?

  Method 1
  For the problem with the sound I suggest you try the steps from the following link:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2
  Step 1: I suggest to start the computer in safe mode and check if you can remove or defragment.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  See also the suggestion of Halima S replied on April 15, 2010
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-defrag-computer/8cb77216-8c20-49A2-a2ab-0e76d442f2ba

• Windows Media Player 11, 20 seconds before the end of a track, and if there is another upcoming track, sound, jumps cracks, breaks upward.

  Original title: dissolution - log jam - sounds 20 seconds before WMP 11 goes from the current track to the other.

  Windows Media Player 11. 20 seconds before the end of a track, and if there is another track to come, the sound cracks, skips, breaks upward. A check in the Task Manager indicates that only when that happens all of a sudden the wscsvc service uses a lot of cpu. All of a sudden, the problem occurred two days ago. I had no explicit amy changed security - but standards updated Windows and McAfee took place.

  As expected Windows difficulty he finds no problem.

  Hi Janssons Frestelse,

  Good to know that you were able to resolve the issue and I thank you for updating the same.

  About the audio driver, you can try uninstalling and reinstalling the sound card and check.

  a. Click Start and type devmgmt.msc, and then Enter.

  b. expand sound, video and game controllers.

  c. right-click on the sound card and choose uninstall.

  d. restart the computer and check

  You can also check the manufacturer's website and try to download the latest verion of Windows Vista audio drivers and check.

  Check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I don't know how to change the size and quality of the text on the screen on Windows 7

  I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

  I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

  Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

  Thank you all once again!   Best regards, Blondie blue.

• Disable defender and Security Essentials due to conflicts, has blocked access and control other programs.

  Hello, I use Windows 7 on a HP G60 laptop. I disabled Windows Defender and Microsoft Security Essentials because I started running free Panda and Malwarebytes Antimalware version. Now an error window Defender blocking access and control of a large number of programs, the window message trying to force me to turn Defender. Disabling Security Essentials is causing other things to not work. I can not yet re - turn on Defender, if I try clicking on the link in the error window, it will not restart, expires.  Tried to turn it back on using the Task Manager, but there is no response at all if I click Start. Access to Services and programs in the start Panel are all both blocked by Defender error window.  I actually want defender and Security Essentials, because they are redundant and are in conflict with other programs I am running, but apparently they cannot be disabled without blocking access to my computer. I thought it was harmful to run all these programs of security in conflict between them, now I can't use my computer at all. Thanks for any advice you can give me.

  Thanks much for the advice. I have a few other questions. Defender is not separated from the essential? Then uninstall Security Essentials would have no effect on the Defender isn't it? My problem is that Defender deactivation now blocks access to many other programs with a Defender error window.  I read that Essentials was supposed to replace defender and Defender should have been stopped or disabled when Essentials has been installed. Is this correct? I didn't, got them both running.  When I installed Panda, I got a notification from Windows on the conflict and choose which program to use. Although I chose my own safety programs at the time, which was never disabled Defender or kept from running. So I finally did it manually by accessing the properties in Services to change the startup type to disable, which is when all the trouble started.

• Blocked applications and sites due to certificate errors

  Now I get blocks of certificate on websites and applications, I used before I default on my internet options. How do I change back to stop all these blocked items and things of certificate arise?

  Thank you

  Val

  Hello

  1. What is the full error message?

  2 are. what applications you referring?

  3. what changes before this problem?

  4. do you use Internet Explorer for Web browser sites?

  5. have you checked the issue with the Internet service provider?

  Certificate errors occur when there is a problem with a certificate or the use of the certificate server.

  About certificate errors

  http://Windows.Microsoft.com/en-us/Windows7/about-certificate-errors

  Follow the steps in this article:

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850

• Adobe can create a way faster to change highlight colors and framed?

  Our office has strongly uses Acrobat to its ability to change the color of the text boxes and comments.

  Each color means a certain element of action, or the group who needs to work on it. To change colors frequently as changes in status.

  The procedure to achieve this is to right-click on an existing highlight, select Properties, click on the square of color, select the color palate, select the new color, close mouth color and click "OK". This is clearly not optimal, and it was much easier in earlier versions of Acrobat.

  Would it be possible to Adobe to create faster with the right button functionality to change the color of highlighting or text box?

  Mr Bernd soon,Bernd at

  That's great - thanks for the reply!

  I wonder why this feature so deeply hidden in Acrobat...?

  It should not require post on a forum and 3 days to find!

  Thanks again,

  Michael

• Cannot change properties of the comments custom on a model of vapp in realization of Vcloud

  Using Warp commands, I was able to add custom properties comments in my TIME with the productSection API.  When I select my TIME and try to change the property of custom comments, it doesn't seem to save its State.

  It was one of the blogs that helped me to create the personalized comments property.

  Taking advantage of vApp & VM Custom properties in vCloud Director - VMware vSphere Blog - VMware Blogs

  When I click Properties. VAPP and comments properties tab, my custom property appears and has a text box for me to change.  The problem is that no matter what I do, the value in the text box never seems to be persistent.

  Does anyone have experience with this?

  Looks like I answered my own question.

  It seems that I can change the ownership of comments customized during deployment of a model.  That's all that I really need so I'll mark this as answered.

  Thank you!