Satellite Pro 6100 Series - the cursor moves around

Dear Forum,

I have a problem with my "slider-stick" on the key board. He wanders without control.
In the case of this, normal work with my mobile phone is not possible.

Is it possible to disable this stick of direction (or what is the correct word for that?).

I took a glance at my material properties, but there are so many entries (plan) and I'm not sure, which one could be responsible for this.

Another possibility: you KNOW this problem one have a solution? Yes Yes Yes.

Help, please!

Thanks in advance,

Thorsten

Hello

This stick is called a pointing device. It s very sensitive.
In addition, you can calibrate this device in the properties of the mouse.
Yes, you right, there are many parameters. But if you press F1 function help occurs.
You will find a decryption on these functions. You can also consult the user manual.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite Pro L650 series - the error screen white balance

    Hi all
    I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
    If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

    I have to restart my computer, and this problem can be solved.

    Is there anyone encounter this problem like me?
    Could you share to me what is the problem? and what is the solution for this problem?

    Thank you very much

    Hello

    Have you noticed this screen problem laptop with mains running or simply using the battery?

    I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

    In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

  • Re: What can I do to get my Satellite Pro 6100 from the dead?

    It's now quite a few years I have a * Satellite Pro 6100 *. I recently had the following problem.

    * _Problem_ *.
    When I press the power button to turn the computer into the AC power light starts flashing orange light (flashes come in groups of eight, the second and eighth flash are longer). Nothing else happens: the computer is dead as a brick. To stop the flashing, I have to disconnect the main power supply and remove the battery.
    * + Note: the power supply is ok.

    * _Question_ *.
    What should I do to restore normal operation?

    Thank you

    Post edited by: hnav

    Hello

    I put t think you will be able to do anything that would bring back the laptop from the dead.

    According to your description books sends a flashing error code that appears always if a motherboard error has been detected.

    In your case only an ASP might help you.

    First, the technician would be able to read the code and then to know what part is malfunctioning.

    In the worst cases, the motherboard must be replaced; (and this could be a costly affair.

    Good luck

  • the cursor moves around, cannot easily place

    original title: after I spend my lap - top, the slider skates autour, & I have a hard time putting it where I want. Why is this happen, and can it be corrected?

    What can be done to correct this problem & what are the causes? Thank you

    ·       You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing or moving the laptop and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the manufacturer website and download the latest device drivers, firmware and software for your keyboard and your mouse (if you also have a mouse - you may need to go manufacturer of mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

    This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

    If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

    I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

    Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Satellite Pro U series: the fan starts to operate - the computer doesn't

    I had this problem since the computer was new (1 year now), and it has increased. Now I can work the internet on the computer, an hour before shutting down the computer - it is too hot. If I don't use products of word or office without being online, it's OK I tried to shut down unused application, it helps a little but not a lot. What can I do?

    Have you tried to clean the fans with a jet of compressed air?
    Many users recommend this tool for the cleaning of the fan, and it looks like it works very well.

    I think dust and debris inside the laptop to prevent fans turn properly and cooling the temperature rises and this leads to an overheating problem

    But if this doesn t help get rid of the problem of overheating then the ASP may be a last resort.

  • Install the new hard drive on Satellite Pro 6100

    Hello

    I have the Satellite Pro 6100 and the hard drive has failed. Bought a new hard drive but have no idea where to begin to install it. Also, I have the product key for windows xp pro, but don't have a disc. Is there a way to get around get one, or someone has any ideas please?

    Thank you

    Michelle

    Hmmmm... It's very strange that you n t have idea how to start. Throughout history, there are only two options:
    -for the installation of an operating system you can use the original Toshiba Recovery disk that came with this laptop. If you n t have it then
    -use the Microsoft installation for the installation of the OS disc. All the drivers, tools and utilities must be installed Additionally one by one. Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads

    Please note: the product key at the bottom belongs to original recovery image so you probably won't be able to use it for the activation of the operating system.

  • LED flashing - need to know the Satellite Pro 6100 POST error codes

    When I tried to turn on my Satellite Pro 6100 laptop the Green DC in power light turned orange and started to blink.
    It flashes 5 times, then 3 times then repeats.

    I guess that this indicates a failure in the system, but where can I find what means this error code?

    Hello

    You can read the flashing code very easily short flashing means 0 long average 1.
    Then you read the complete code back.

    Finally, the error code must be converted into HEXADECIMAL value and then a technician of the laptop could know what means this value.

    The ASP in your country should provide details of the mentioned error.

    Welcome them

  • Satellite Pro 6100: Bluetooth - how to connect the mobile phone

    I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
    How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

    Well, the Bluetooth software has been installed on your laptop, BUT the question is:
    Your group has installed Bluetooth card?

    AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

    I think that you cannot connect your mobile phone because BT is not available.

  • Need drivers for Satellite Pro 6100-PS610E

    Help, please.
    I have an older Toshiba laptop Satellite Pro 6100-PS610E ngysc-en
    I was wondering what model it is.
    I can't find on internet to get drivers etc.

    I'm new here so if I'm wrong place, sorry

    Thank you

    Hello

    It is an old Satellite Pro 6100 series.
    You can't find drivers on the page of the European driver Toshiba portable computer area because pilots are moved to the archives (laptop is oldie ;)).

    So to access the page of European driver of Toshiba and choose Archive in the type of product.
    Then, Satellite Pro-> Satellite Pro 61xx-> Satellite Pro 6100

    Here you will find the drivers available.

    Welcome them

  • Need to drive caddy HARD and coverage for Satellite Pro 6100 HARD drive

    Does anyone know the part numbers or to get a hard drive caddy and the Satellite Pro 6100 Series hard drive
    Thank you

    What caddy did you? Internal an external 2.5 USB caddy for a HARD drive or the case?
    I think that if you need a domestic framework for laptop you should order it since the maintainer authorized Toshiba in your country.
    I think that guys should be able to order something like this directly from the Toshiba store

  • Satellite Pro 6100-> DVD playback is OK, but can not read CD

    I have Toshiba Satellite pro 6100 and the reader of CD/DVD SD-C2502 on winxp sp2.
    The drive did not read any CD/DVD at the outset.
    After a DVD lens cleaner, it plays DVDs, but the Player cannot read any CD incl. music CD

    The error is 'windows cannot read the disk. The disc is damaged or... ".

    I "took off the CD/DVD drive and reconnected" and the pilot also seems to be OK.

    Any suggestions or ideas?

    Hello

    This sound like a player cannot calibrate properly and that's why the drive cannot read the CD disks.
    Especially the replacement drive is necessary and inevitable. :(

  • Satellite Pro 6100 video card does not work!

    I have a Satellite pro 6100, but the video card will not work!

    Toshiba sells parts of the satellite pro 6100?

    Greetz, jeroen

    Hello

    As far as I know that Toshiba doesn't sells the parts directly and you can order it by the service partner authorized in your country.

  • Screen is scrolling down repeatedly and the cursor moves on its own.

    The cursor is rolling along of type I.m

    You do not give much information about what is really happening, but the first two points to check are the mouse and the keyboard, before looking for other hardware or software problems.

    If you have another mouse and keyboard available, you can try reverse the two and restart the computer to see if the problem persists.  If not a little more information would be needed before I could give advice on the best way to solve the problem.

    You're talking about the screen, scroll down and the cursor moving without the mouse - these are two separate actions.

    He is not anywhere on the screen do scroll down unless you have a running program - this scrolling happens with all programs that could scroll, or simply with a certain program?

    The cursor moves randomly or according to a specific orientation?  The cursor move around all the time or only in certain programs?

    These problems occur all the time, or only when you do something, like click with the mouse or use the scroll wheel?

  • Satellite Pro 6100: cursor moves out of control on the screen

    Hey guys,.

    I'm seriously going crazy right about now... my problem is the following:

    I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

    About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

    The thing I've tried:
    Ran Spybot: Search and Destroy
    Ran Adaware
    Xoftspy RAN
    A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
    New keyboard
    New motherboard

    Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

    Thanks in advance!

    Hello

    I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
    The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

    Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

    If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

  • Satellite Pro A300 - the cursor moves continuously when connected an external mouse

    Hello

    I have a Satellite Pro A300. When I connect a mouse directly by USB the cursor moves constantly. I also have a mouse attached via a docking station, Toshiba and that works perfectly.

    It doesn't matter what USB port I use or if the laptop is connected to the docking station or not, or if it works on AC or on battery power.

    I thought it was the mouse that was the problem, so I went and bought a new one but the problem persists.

    Actually, while I wrote this post, he has stopped doing that and then started! Very frustrating.

    Can anyone help?

    Thank you

    Susib

    Hello

    How about, the touchpad is the slider moves and jumps using the touchpad?
    Try to disable the touchpad while using the USB mouse control if you can notice a difference

    What about BIOS?
    You have the latest version installed?
    Check it!

Maybe you are looking for