CHANGE DATE OF FAX

Similar Questions

• OfficeJet 6700: change the timestamp Fax

  Not connected to the internet, using as a copier/fax. How do I change of timestamp Fax?

  Hi @jas119,

  Welcome to the HP Support forum.

  I understand that you have a HP Officejet 6700 Premium e-all-in-one printer that you would like to know how to change the Date and time for the fax on. I would like to help with that.

  The Date and time of the printer can be changed via the preferences in the Setup menu on the control panel of the printer.

  1. press on the installation program icon.

  2. touch Preferences.

  3. press on Date and time to set the date and time.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• The batch change date and time

  I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

  When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

  Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

  Any guidance would be greatly appreciated.  Thank you.

  Just delete the text "" * minutes ' in the lines where the date is changed. "

  Then time will be incremented seconds.

  For example, for the first version of the script use:

  the value timeIncrement to 1 - increment of time in seconds

  (* select at least 2 images in Photos *)

  say application 'Photos '.

  activate

  game imageSel for (get selection)

  if ({ is } imageSel) or (the length of imageSel < 2) then

  error "Please select at least two images."

  on the other

  defined first_image to the point 1 of the imageSel

  the value first_date to (the date of first_image) as date of

  Repeat with I from 2 to the County of imageSel

  put next_image to the point I of imageSel

  the value next_date to (the date of next_image) as date of

  the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

  say next_image

  the value le Date of next_image to (next_date + time_difference) as date of

  end say

  end Repeat

  end if

  return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

  end say

  
  

• change date on photo

  the date on the camera was wrong when photographed I can change date right?

  See change the date and time a photo was taken

• Changing data in a tabular view with Oracle MAF

  Hello.

  I need to change data in the table view, which component you would recommend me?

  I use the "TABLE LAYOUT" component, but it is very uncomfortable when I try to change data on each row because it has lost focus on the selection.
  

  Hello

  There is no component entry in table form in the CRG at this stage. The disadvantage - as you mentioned - the use of tabular layout with an iterator is that you must follow and set the current line in the link layer

  Frank

• password change date

  Hello

  What data dictionary, I know that when my sys or other user password has been changed.

  Concerning

  Rabi

  dbksunil escribio:

  Hello

  Oracle follows the expire of the password based on when it was most recently modified. So, looking at the DBA_USERS. EXPIRY_DATE and subtracting PASSWORD_LIFE_TIME you can determine what password was last changed. The last password change time are also directly from the PTIME column visible in dictionary USER table $ (view DBA_USERS based).

  If you have PASSWORD_REUSE_TIME and PASSWORD_REUSE_MAX contained a profile assigned to a user account you can reference dictionary table USER_HISTORY$ for when the password has been changed for this account. This will keep any password which always falls within the limits PASSWORD_REUSE_TIME and PASSWORD_REUSE_MAX.

  Must run this query after the Sys user login

  SELECT user$ .NAME, use$. The user PASSWORD$ .ptime, user_history$ .password_date

  OF SYS.user_history$, SYS.user$

  WHERE user_history .user$ # .user user = $ #.

  =========================================

  OR try this query:

  SELECT name,

  CTime,

  PtIMe

  FROM sys.user$

  WHERE name = 'username ';

  Note: Replace-USER NAME with the user name you need to know the information.

  CTIME tells - moment of creation

  PTIME indicates - change time password

  Thank you.

  Lol, you forgot to copy the last sentence: "under the direction of: varun4dba February 3, 2011 19:28.

  Of

  Password last changed date

  At least paste the link from which copy you it... does not the words of others

• How Golden Gate will use change data Capture (CDC) in SQLserver2008R2

  How Golden Gate will use change data Capture (CDC) in SQL server 2008 R2. How much space it will occupy for each table when it erases the data and what will be the retention period for the tables of the CDC.

  So, here's what happens next. Normally, when a tranlog backup occurs, SQL Server may decide to release the tranlog space after the backup of the log, for transactions that have been committed and saved.

  When you activate a form any replication, like with OGG and allowing TRANDATA, you need to eat this truncation periodically. So with your configuration, even if the log backup occurs over 15 minutes, data in the journal are not allowed to be released after the log backup until the log backup that occurs after the 4th consecutive time of work.

  It is fine if you are not concerned about the lack of free newspaper in 4 hours. Just something to keep in mind.

• Nothing happen when I click 'Change date limit' in Tracker

  Hello

  I have a problem with the function "change date limit" in Tracker.

  When I click on update a deadline for a shared review, nothing happen.

  The strange thing is that comments that won't let me put to update the deadline have a way of 'http' then that some of my other reviews - with a path to my local drive - let me update the due date. (I don't know why my comments have different paths, in the first place since I use the same method to create shared reviews)

  I know that the trick to workaround (save a copy of archive and send for review) but I wonder if there is a fix for this problem.

  Thank you

  You get "http" in the path of the test that you had opened the review folder directly from the server.

  You do not need to launch another review, just save the control file if you open the file directly from the server. Then it shows the path of the local disk and you can easily change the deadline.

• How to change data objects and update the corresponding task and task forms?

  Hi all
  
  I modified this thread because I found that I had many questions to ask.
  
  1.
  I'm quite new to OBPM and would like to know how to change data - for clarity objects add a new attribute "Dependents of the Client" "Customer care" - and therefore update the task that uses the 'customer information' what makes via data binding - I get an error message here - or via the data about the data Task-The chosen tab it does not appear to be linked to my approach in some sort.
  
  2.
  Will be the task form that I generated earlier in < 1 > update automatically? Is it possible to update manually if the task has been clearly customized?
  
  3.
  What are the objects of project data? They do not store values in my process. They are for the arguments only - like reusable process?
  
  Thanks in advance,
  
  Kind regards
  
  Yanis

  Hi Yanius,

  (1) assume that you start from scratch. First, you declare your data object structure. To do this, you must go to the BPM project Naviagtor, right-click on 'Catalogue of trades' and create a new Module. Then you can right click on the module you created and select the new object of trade. Add all the attributes you need. It is the same to declare a class in Java. Second, you must declare a variable of the type process you have created: select the process, go to the Structure display (if you don't go and activate it in menu view Jdev-> Structure). Right click on the Process data object and create your variable. It's like setting a variable in Java. In short, answering your question, make the path opposite: find in your process of type "Customer Details", then go to your catalog Business, right click and change the definition to add what you need.

  (2) the human task will not update automatically (annoying). If you change the object itself, so you don't need to change your mappings because actually there the same object you are through the task as in / out argument. There are two things here: the human task and form associated with it (where probably change you the subject i.e. customer details). Go to the form (.jspx) - click on the tab links (by default, you are in the Design). In the links page, there is a link on top: "Page Définition File" (something like proj/pageDef/...xml). Open the XML file and go to the source. There you can add manually now all the attributes you need and that were not available before (i.e. dependent Client). It's a little complicated, but at least you don't have to recreate it. particularly useful if you have already implemented and subsequently form, you need to add more things (business is very good to say otherwise, "I would like to see something else in the form" ;)

  (3) project data objects are visible by all processes that you have in the project rather than the object of process data that are visible only to the method where you set the variable to. This means that you declare an object of data of the project once and then it will be available to all processes. Keep in mind that each process has a copy of it. In other words, it is not like a global variable that everyone sees. If edit you in a single process, other processes will not see the new value.

  I hope that I have answered your questions.
  See you soon,.
  Felipe

• Lightroom export - original file with the Lightroom change data

  Hello, Hello!

  I imported a file, for the sake of arguments, some JPEG files, TIFF and DND in Lightroom photos, leaving the files in place and just linking them to the library of the Lightroom Catalog. I then did a bunch of 'changes' to photos in Lightroom (the data of these changes are stored in the Lightroom catalog file, right?).

  Now can I export some of the photos from Lightroom so that the file that comes out is, in the same/different file format (e.g. JPEG/TIFF/DNG) and have the change Lightroom incorporated (perhaps in the EXIF data) data from the exported file? Can I then open it with a 'normal' program and have it show the original? Can I open it with Lightroom/Photoshop (?) so it shows the original with the change data applied?

  Thank you very much! :-))

  Now can I export some of the photos from Lightroom so that the file that comes out is, in the same/different file format (e.g. JPEG/TIFF/DNG) and have the change Lightroom incorporated (perhaps in the EXIF data) data from the exported file?

  Yes, but you must not export. Simply press Ctrl / Cmd + S to save metadata. the metadata will be incorporated into files. Note that the image will not be altered. In other words, if you view the jpeg format in an external viewer, you will not see adjustments made in Lightroom. Only Adobe products can interpred those.

  Can I then open it with a 'normal' program and have it show the original?

  Yes.

  Can I open it with Lightroom/Photoshop (?) so it shows the original with the change data applied?

  Yes. When you open in Photoshop, and it's a non - RAW (such as JPEG or TIFF) file, there is an option somewhere in Camera RAW to be used for the opening no-RAWs. The point is, those who must go through Camera RAW, instead opened directly in Photoshop, to correctly interpret metadata.

• Cannot change data values

  I want to change data in a view that joins multiple tables
  
  Change value window appears but I can't change the value
  
  I looked on the columns tab and UPDATABLE column is set to NO for all fields
  
  I tried to set the MODIFIABLE Yes field by clicking on the selection button
  
  again, a window for editing the value comes back but I can't change the value
  
  Help, please
  
  Thanks in advance

  Right, your point of view is not editable, and so you cannot place the INSTEAD - OF trigger or the other. Because you are unable to update normally, you can do anything in the place or the other. Catch philosophy?
  So, your only options are to open the underlying tables, so you can change them through the data tab or write the INSERT/UPDATE statements yourself in a worksheet.

  Kind regards
  K.

  PS: For a view to be updated, you need to have a 1:1 relationship with the underlying tables, so the UPDATE statement inherits the same key. The database is not so smart to find another.

• Replication with only changed data?

  We want to transfer changed data from Oracle to SQL server for Data Warehouse solution. It is one-way replication (from Oracle 10 g 2 to SQL server 2005). We are having about 100 tables that must be replicated with SQL server, but only changed(Insert,Update,Delete) data will be replicated.
  
  Please let me know if you have any suggestions on how can I perform this replication and what tools I use.

  Of course, the major challenge will identify changed lines. Assuming that you don't have a way to make his already (i.e. a LAST_UPDATED_DATE column in all tables, a table of audit, changes, etc.), Oracle provides a few different technologies to do this. For heterogeneous replication, I tend to focus on Oracle Change Data Capture (CDC), which publishes the changes in a table that your replication process can subscribe to. That also tends to be more conducive to the load of nightly standard an DW. You can also use Oracle Streams either using streams and heterogeneous services or by writing your own code to apply the XML representation of a CRL to the SQL Server database. If you need real-time data, it is probably the best solution, but for most applications of data warehouse, it is probably overkill.

  Once you can identify changed lines, - hand replication logic coding usually isn't too difficult. You can spawn probably most among the definitions of table on both sides (assuming these definitions to match). If you want to go out and buy an ETL tool, there are probably tools who can subscribe to CDC and push the changes to SQL Server. Oracle Data Integrator (ODI) would be the tool I'd look at first like most likely to be able to do. There are also third-party (i.e. Golden Gate) that sell software that mines redo logs and applies changes to all databases, but which tends to be quite expensive and a bit complex to install / configure / administer.

  Justin

• How to set the date for fax reports? cc = us

  All my fax reports Jan00 date.  How can I change this to reflect the effective date?

  Hello Fred

  To fix a Date & duration of front panel of the printer, go to Configuration-> Preferences-> Date & time

  This setting would change the Date and time on the fax.

• change the incoming fax for .tif files

  I'm faxes sent on my computer in .tiff format. The program I use to move faxes to records of patients needs to be in .tif format. Can I change this?

  I guess since you asked here in a Thunderbird support forum for these faxes come to you by e-mail and you use Thunderbird.
  Thunderbird offers just your mail. It has nothing to do with the naming of files.
  There is no difference between a .tif and a file .tiff except for the number of characters in the file extension. You can rename the file yourself if your system will not accept the 4-digit extension.
  You can always contact the sender and ask them to change the name before you send it.

• Is it possible to change data in a cell 'mirror' + RESEARCH questions?

  Hi all!

  The idea is the following:

  I have an accounting base numbers document implemented that automates the process of encoding of individual invoices, clients, with their price + coupons service announcements and summarizes the accounting.

  Information boards is implemented for individual receipts, or a nicer individual record to customer research with the research

  That's where I met 3 barriers:

  (1) I was wondering if it was possible for a field in one datasheet to other mirrored? :

  -L' idea is NOT to have a simple '= A$ $1 ' or ' = LOOKUP (REF., range, content) not allowing editing. "

  -It is a cell on A page SHARE the SAME content in another cell in the spreadsheet b: change in the sheet A or B would automatically change the field of mirror in the other sheet. It would be a very neatly to create a form for the encoding of the data! Somehow, I have my doubts about what is a feature of the numbers, but I was wondering if anyone knew a workaround? In other words: a field at several places.

  (2) instead of a SEARCH function that the problem of data modified in the original table (example: a Bills (past) sheet being affected by changes made to a price list): is there an equivalent of 'paste values' to that?

  (3) I have a 'General' Journal (and a table) to display financial data from my "bills", but the info is basically just a table with the "' values sought my table"bills ". It works very well with the "auto-fill" when I manually adjust the size of the table, as the invoice automatically filled when increasing the size of the table. I was wondering if there was a) an easier way to do what I know and b) a way for the "accounting" array to dynamically adjust its size according to the number of invoices (same result as one)).

  ANY help is greatly appreciated!

  Christian

  Hi Christian,

  Brief answers to three questions:

  1. # Research reports are always a sense - entered into a data cell can be collected by a formula in a cell of the second, but the data entered into the second cell will not create a change in the first cell. A cell can contain a "fixed" value, which can be changed manually in this cell, or it may contain a formula that combines the data of one or more other cells and eventually made some calculations before displaying the result.
     A cell that contains a formula of edition replaces the formula with the data entered.
  2. The formulas are always "live". If the result of the formula is based on data specific to a cell, then a change in the data (e.g. a price) in this cell will change the result calculated by the formula and displayed in the cell. The result can be 'fixed' (made to the remain the same, not "fixed") using values of dough (renamed paste formula results), but this can be done by using a formula.
  3. Size (number of rows) of the table 'accounting' (or ' table on the "journal") can not be adjusted automatically depending on the size (number of rows) of the table "bills". In the "accounts" table formulas are automatically added as every cell in the column of the first row header not the above one row being added contains the same formula. Replacing any copy of this formula with the calculated results by that copy breaks the chain and the formula prevents fill automatically new lines added at the end of the table.

  Some general considerations:

  All data should be entered only once.

  Data entry must be separated from the calculation to avoid the accidental destruction of the formulas.

  Data 'Immutable' (eg. current prices, data on clients) may be imposed and looked up from lookup tables.

  This has the potential of growth to a large set of data. Numbers are known to slow down considerably with the large data sets (and 'big' happens quite quickly).

  With regard to price changes:

  Use the INDEX and MATCH the prices of research allowed the transaction date to control the INDEX column will return a price. Each price change (or set of price changes) is entered in a new column, marked with the data hence these prices are in effect. Price unchanged compared to the previous date of change should also be included in the new column.

  Kind regards

  Barry