OfficeJet 6700: change the timestamp Fax

Similar Questions

• OfficeJet 6700: change the default settings of the printer

  I want to change 'Gray levels' to 'Off' to 'Black ink only' and 'Output quality' to 'Normal' to 'project '. I went to the Panel of control permanently change my default settings of the printer, but whenever I try to print, the parameters began to 'Off' and 'Normal '.

  Hey @arican55,

  I see you have some problems with the definition of default values on your PC of Windows 10 when printing to your Officejet 6700 Premium e-all-in-one printer. I can help you with that.

  To clear all default settings:

  1. If the printer is connected via USB cable to your PC, delete.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

  Please let me know the results after following the above. If you can set the default values, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet 6700: Attaching the scanner?

  Hello

  How the scanner cover placed on an OfficeJet 6700? The lid seems set in a Grove with a couple of languages that go into the slots when the lid is on the printer as it should be, but if I lift the lid to put a document on the scanner lid slide because it is not attached to the printer with hinges. Any help or information would be appreciated.

  Sincerely,

  Hi @MKHCPA,

  Welcome to the HP Forums!

  I see that your scanner cover is is more attached to your HP Officejet 6700. I'm happy to help you!

  With the detached scanner cover, it means that the printer needs to be repaired. As this is a malfunction of the equipment. Please contact our telephone support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."

• change the incoming fax for .tif files

  I'm faxes sent on my computer in .tiff format. The program I use to move faxes to records of patients needs to be in .tif format. Can I change this?

  I guess since you asked here in a Thunderbird support forum for these faxes come to you by e-mail and you use Thunderbird.
  Thunderbird offers just your mail. It has nothing to do with the naming of files.
  There is no difference between a .tif and a file .tiff except for the number of characters in the file extension. You can rename the file yourself if your system will not accept the 4-digit extension.
  You can always contact the sender and ask them to change the name before you send it.

• HP Officejet 6700 Premium: Cannot receive faxes on 6700 Premium

  I can't receive faxes unless I hit the button "accept" - well to AutoAccept is on.   He sends faxes outgoing ok.

  Hello @shamadaw ,

  Welcome to the forums of HP.

  I understand that your premium of 6700 does not receive faxes properly.

  I would like to help.

  The communication seems to be there, but something is wrong with a framework.

  If I could know a little more about the configuration, I can better help you.

  The voice calls and faxes that are received on the same line?

  Is there a voicemail on line service?

  Faxes have a distinctive ring?

  The installation of the printer must recognize the distinctive ring?

  Or if there is no distinctive ring, perhaps the printer is looking for one when it shouldn't.

  Go to the configuration menu, then the Tools submenu.

  Select run fax Test.

• OfficeJet prol7680 change the duration

  I always try to change the time on my L7680 and when I google how do, the information I received do not work.  When I select 'SET UP
  on the control panel there is no option to set time/date.  No information contained in the owner's manual

  The sequence is the Installer / tools / Date and time.

• Is it possible to change the timestamp on a photo on the iPhone 6?

  I need a question and answer that emerged in a court case, I'm involved in - is it possible to manipulate or modify the date information on a picture taken on an iPhone 6?

  Yes. The encoded information can be changed using the Windows or Mac photo editing tools. An expert can detect the fact that it has been changed, however.

• OfficeJet 6835: Changing the settings for printing emails

  I had to reinstall my driver software after the operating system upgrade. Now I can't print emails or attachments directly, but rather have to save first. I had this problem when I originally set up the printer and thought to it easily, but with the installation of confusion of the new operating system, I can not for the life of figure me out how to do so that I can simply print an email or an attachment. Help!

  Hello

  What browser or application are trying to print emails?

  If you use Google Chrome open dialog box print, then press change.
  Select your printer from the list instead of the default save as PDF option and try to print again.

  Otherwise be sure to specify accordingly.

  Shlomi

• Change the timestamp format in mysql

  I've created a field date_posted in Recordset1 in my database named my_db now by default is set to the current timestamp, now the problem is the value that is generated is in this format

  yyyy-mm-dd hh: mm:

  but I want it to appear in this format it

  month date; year to hh: mm am/pm

  lets make it simple by this example, say that the month is June date is 15 and the time is 10:24

  the default format is like this

  2009-06-15 10:24

  but I want it to be like that

  June 15, 2009 at 10:24

  Please help and thanks in advance.

  Use the function DATE_FORMAT()) MySQL in your SQL query and assign the result to an alias.

  SELECT col1, col2, DATE_FORMAT(datecol, '%M %D, %Y at %k:%i %p') AS formatted_date
  FROM mytable
  

  "datecol" is the name of the column that is stored in your date. The date formatting will be available in your recordset as formatted_date.

  Moreover, this question was asked repeatedly in this forum. You should be able to find the answer using the search function.

• Change the timestamp display in the table of FY

  Hello
  
  I use JDev 11.1.1.1.0
  
  I have a dynamic chart that shows data from several features of ejb, determined by a selectOneChoice. Some entities have attributes of Timestamp. When an entity is displayed in the table, only the date format is displayed for timestamp attributes. I want that it also displays the time. How can I do this?
  
  Thank you
  André

  Hi Andre,

  To display the date and both times, you must set the property type of the tag of the converter as "both".

  Try this:

  Jean Lou

• OfficeJet 5740: change the default settings of the printer

  The default printer for vs. black & white color is set to default color. Almost all my printing needs in black & white. If the default setting can be black and white? If so, how?

  Marcelus

  Excellent response. I had to go in the back door of printers & devices because settings printers & devices can only set as default or remove devices. typing "printer" in the search of this screen window took me to the printers & peripherals where preferences can be set.

  Thanks - Ahhh the bath of right not so before learning new software.

  -Alan

• change the com port assigned to the fax and scan

  I used fax and scanning for once.  I had to move my external modem to a different port.

  I don't know how to change the windows fax and scan com port manually.

  the wizard does NOT start, I guess because the fax is installed and worked until I had to change the number of COM port...  I need to change the number of pot with hundreds of research, it seems that no one knows how to change manually the Compote in windows fax and scan, unless they use the wizard.

  my assistant does not start. I guess I'm 'old school' I don't need an Assistant, I need to manually change the fax uses com port.

  :-), it's frustrating because help said only: click "fax" in the lower left corner, and they all assume the installation wizard starts and everything will be fine. :-(

  the wizard does not start. :-(

  I am desperate to get my fax work and need to know how to set the correct port number in a system that is installed and running, such as the wizard never starts.

  for anyone who goes out at the end of questions and ideas, I have a fax application stand alone who is working with the new port setting. It's just not a good app for my needs

  Please?

  Thank you

  John

  Post proposed by the moderator of the appropriate forum category

  Hi John,.

  You can follow the steps below to change the COM port for a modem:

  1. search the Device Manager.

  2 look for the Modem device, right-click on it, and then click Properties.

  • If the change settings button is present, you must click on it to make changes to the appliance. If the user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click continue.
  • If the change settings button is not present, the modem does not support the ability to change the modem settings. Refer to the documentation provided by the vendor of your modem.

  3. on the Advanced tab, click Advanced port settings.

  • If this option is not displayed, the modem does not support the ability to change the assigned COM port. Refer to the documentation provided by the vendor of your modem.

  If the same persists, we suggest that you post your query in Microsoft TechNet so that their support team will provide you in-depth assistance.

  Kind regards.

• Officejet 6700 scanning settings

  OfficeJet 6700 Premium (Prod # CV078A) network (direct connection to the router). 1 = Win XP SP3 computer. computer 2 = WIN7 Pro SP1 32-bit;

  A couple of questions about scanning. This printer has replaced an Officejet 6500 failure that has served me well for several years before suffering significant constipation of ink.

  1 scanned files are much larger than those produced by my 6500. I adjusted the scanning parameters, including PDF (NOT available), B & W and size of file/quality under Advanced settings, the "smaller" value The file sizes are about 3 x what has been produced by using 6500 dpi (200). Any suggestions?

  2 prerequisite software registered automatically scans as "Scan001", "Scan002", etc.. Current software requires to manually change the file name for each further analysis when scanning from the computer using the HP software. Is this correct feature? (If so, it is a step backwards.) See also 3 below. [Edit: point of Travis' 2 in response below deals with this issue - thanks!]

  3. scan of the computer (from the printer front panel) saves the file 'Scan0001', 'Scan0002', etc.  This works as expected. Why is this not implemented when using 2 above? (Or am I missing?).

  Thanks in advance for the answer and enlightenment.

  OK - downloaded Free Edition Paperscan v.1.8.3 and used the TWAIN driver to get the image of my Officejet 6700 using the document feeder. Registered 1 page file to PDF with dpi set at 200. File size is 22K. (Now, that's more like it.) Oh, and the quality of the image will appear better, too. [Edit: but see message below re.] NAPS2]

  Same document 1 page using the old HP scanning, recorded as a simple pdf software with 200 dpi setting results in a file size of 177 K! 22 K vs 177 K - same, I can do that math.

  Conclusion: there is something seriously wrong [ineffective/sloppy code] with the HP scanning software. (and I don't think they care)

  Recommendation: Fix it.

• OfficeJet 6700 on Windows 7 - HP solutions Center

  HP Solution Center does not recognize my 6700 Officejet printer. My first thought was to uninstall and reinstall HP Solution Center. How can I get a copy to reinstall. Or, if there is a more simple solution, I would like to know abou it.  Thank you, Sandy

  Hi Sandy,

  The solution Center HP is part of the software provided for older products from HP, is not part of the HP software for the 6700 and can not be used with the specific model.

  You can access the software by clicking on the Windows icon ( ), click HP , click all programs , click on the HP Officejet 6700 folder, and then click the HP Officejet 6700. The software of the printer opens.

  Kind regards

  Shlomi

• HP Officejet 6700 desktop program installed displays text xml files using

  Afer, install the drivers and the printer software on 64 bit Windows 7 Pro, the shortcut on the desktop and start menu entry "HP Officejet 6700' returns the text for the XML files .  When the icon is first you click a window asked me to choose which installed printer, and then displays the two xml files.  The first file is called 'HPSPProgress' the second 'HPSolutionPortal' using windows Notepad.

  The shortcut pointing to the following text:

  "C:\Program HP HP Officejet Officejet 6700.exe 6700\Bin\HP" - launch UDCDevicePage

  Web and print based access drivers will work perfectly, and the HP Scan program office works very well also. All the functions of the printer work properly. But this program installed a desktop will not work.

  I uninstalled, rebooted and reinstalled several times as an administrator and with various parameters compatibility without success.  I tried to install the CD as well as on the internet with the same result.

  Advice please.

  Hey,.

  I would recommend running the fix for the patch posted by Kyle_W in the 4th message from the thread linked below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/officejetpro-8600-solution-Portal-Displays-HTML-code-in/TD-p/2489011

  Let me know if this solves your problem,

  Jason