user profile service is a not the logon user profile cannot be loaded
just re installed windows
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.
Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html
BE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html
Use the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.
You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
The user profile service has not logon. User profile cannot be loaded.
This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
After I typed the password Vista gives me an error screen... "The Service user profile service is a not the user profile cannot loaded e to logon.
Any ideas? Someone has encountered this problem before?
Please see the links to solve this question below. "The user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
The above message appears when I try to log in. He only started past today, for no apparent reason. I can access a different account on my computer, but that information is stored on my own connection. The administrator so I cannot get a more far by creating other accounts etc, (which would not have the info I need anyway). Help... I work from home so it's impossible to get anything done. Thank you.
Hello suestev,
Thanks for posting your question on the Microsoft answers Forum.
Please see the Microsoft KB article below for assistance with the error:
KB 947215 - error message when you log on a Windows Vista-based computer by using a temporary profile:
"The user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215I have included several links that addresses the error message for the user profile cannot be loaded.
You profile might be corrupted and needs to be recreated.You can also check the tutorial to
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlGood thread on Technet dealing with corrupted user profiles
http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/e806dd5d-6764-463e-B181-e3aaee271231/How to fix a corrupted user profile:
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxIf please reply back and let us know if these articles have helped solve your problem or if you still need help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
The user profile service has not logon. User profile cannot be loaded error message
original title: user profiles
I have recently all of a sudden can't open my user profile. When I put my password in it reads that the user profile service has no logon. User profile cannot be loaded. I am the Administrator without getting on my user profile, I can't do anything. How you start in safe mode? I really need help!
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I can't log on Windows Vista
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem?
My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-coreHi ravichandrans36,
Thank you for using Microsoft Windows forum.
This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
To resolve this issue, follow these steps:
1 delete the profile by using the computer properties dialog box. To do this, follow these steps:
a. Click Start, right-click computer and then click Properties.
b. click on change settings.
c. in the System Properties dialog box, click the Advanced tab.
d. under user profiles, click settings.
e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
2. Click Start, type regedit in the start search box and then press ENTER.3. Locate, and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList4 right-click the SID that you want to delete and then click on remove.
5 log on to the computer and create a new profile.
For more information, see: http://support.microsoft.com/kb/947215
EDITING REGISTRY WARNING:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756Kind regards
Aziz Nadeem - Microsoft Support -
I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help
I had the same problem. Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked. Then I reinforced to the back and looked at the whole picture. It turns out that it wasn't a computer after all problem but a question of the user. Under folder C:/users/default in the end I managed to delete all subfolders except appdata. So when you went to create a new user he could not find the correct files to copy to the new profile to store information in. To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine. Of course I could create my comments and new users account once again. Finally. -
user profile service service failed the logon.user profile cannot be loaded
everytime I try to log the error message above appears, as administrator of what s that keeps me from being able to try to solve
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
Profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
two with the same password) use to test or difficulty of the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
the user profile service has no logon. User profile cannot be loaded
made a update hp laptop hp on my computer and now I can't log on to the pc. I get the message
use profile service service is not logon.
User profile cannot be loaded.
I don't know what to do.
Choose windows Safe Mode-start with only the kernel drivers services n. use whe u will not start after installing a new device or driver.
Once in safe mode, click Start, all programs, accessories, System Tools_ system restore. In the window that opens, choose a date before the problem started. This will restore the settings on that date.
-
Original title: cannot open a session
I get the message "the service user profile Service has no logon. User profile cannot be loaded. "I can't get on my computer. What can I do? Help, please! I need to get the work done.
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
-------------------------------------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html-------------------------------------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html-------------------------------------------------------------------------------------------------------------------------------------
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I use Vista Home Premium
- Windows automatically updated and turn off the power.
- I couldn't connect, it says that the service user profile service does not logon. User profile cannot be loaded.
- Then I deleted my user profile in SafeMode by doing: 'make right click on computer - properties - settings - advanced - user - deleted my old account profile settings '. There is no option for me to "keep my files."
- Then I managed to connect, I guess having creates a default user account? Because there is a new folder in C:\Users\, called (former name). (old name) - PC. In C:\Users\(old name), it is empty.
Now, all my original files are gone because I deleted my old user profile. The size of my c: drive-has not changed much, so I guess all my files are still in only my computer, it's just that I can't find their "PATH". How could I get re-navigate to all my files? I need them so badly.
Thank you very much for the one who can help me.
Hello
Log on as ADMIN and look in C:\Users where C: is the drive where the user folders.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
Earth) has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How can I solve this problem? I have Windows Vista.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
I just installed the three latest updates (04/27/11) and now my desktop computer says "the service user profile Service does not log. User profile cannot be loaded. "Does anyone have any suggestions. I now use my laptop because I was the only user on the desktop, there is no way to get on it now.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
When I try to login, I get "user profile Service service has no logon. User profile cannot be loaded. "What does that mean? How did this happen and how to fix it?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Maybe you are looking for
-
When will there be a new iPod touch?
The latest update/version was in July 2015. Does anyone know if the iPod Touch will be updated? When? Amy rumors? I understand that many people think, the iPod Touch is redundant because of the iPhone, but I'm not like that. I have an iPhone that is
-
MEIDA player does not list the songs on the MP3 CD already inserted in the CD drive
I wanted to rip the songs to an MP3 CD to Media Player and then transfer them to my MP3 player, but even if the CD is already running, the CD's songs do not list in Media Player. I tried to copy songs in Media Player by copying on the desktop, then
-
Spooler subsystem app has encountered a problem.
HP Laserjet 1020 printer does not work. Have used this printer for years. Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message. Used Mr. Fixit. Have the print spooler service m
-
iSync no longer available to users of the new Mac Lion
Hello In recent years I have sonyericsson phones, I currently have a Satio. Until now, I never had no problem sync my phone with my PC or Mac computer. However, since I upgraded my mac to the new OS Lion I realized that it doesn't have the isync tool
-
HP dv6t-2170us hurtling down the powers of 64-bit Windows 7 without any error or warning, while passing under the battery or plugged. No idea why. Battery is good, powersupply is good. Seems to stand more when running in safe mode with network. F