Change hostname cRIO programmatically

Similar Questions

• ESG, change hostname and enable the SSH service

  How do I change hostname for ESR or DLR - VM?

  also assuming that I have doesn't enable the SSH service in the initial configuration. How to allow him later of GUI or CLI and check the status of the SSH service?

  > How can I change the hostname for ESR or DLR - VM?

  You can't at the moment from the GUI, until now the REST API calls. vExpert: Tomas Fojtahas this blog about using PowerCLI:

  Renaming edge Gateway | Tom Fojta & #039; s Blog

  > also assuming that I have does not have activate the SSH service in the initial configuration. How to allow him later of GUI or CLI and check the status of the SSH service?

  From the Web of GUI client:

  1 / go to Networking & Security

  2 / NSX edges, then select the edge in question

  3 / on stocks on the block, select 'change CLI Credentials. "

  

  4 / there you can enable SSH

  Check: If SSH is already on the 'case' is already selected. Also you should be able to SSH into the edge now.

  HTH,

  Roland

• change of appointment programmatically

  I use TestStand 4.1 with the model of parallel processes.

  Is it possible to programmatically change the "number of threads by date', once the appointment has been created?

  Kind regards

  Tom

  Another possibility is to pass on the date you use and go to the walk-around reference (rather than access it by name). This might make sense if, for example, you have a different number of threads for each product group. You must then pass on what date your threads use when passing on what product you are testing.

  -Doug

• change hostname

  Hi all

  what I have to change in the ICollection, if I want to change the host name of the server bigbrother?

  Best regards, Alfons

  Make sure that the hostname returned by the command "hostname" is identical to the etc/bb-hosts (without typos :-), it happens sometimes)

  you want to change the IP address and the hostname in the BB, because you have changed the real name of the server and IP or you just want to use a name other than the actual server name?

  You can also try to address 127.0.0.1 IP see if it works.

  Good bye

• SSH still work after the change hostname?

  Hi all

  I was under the impression (from past experiences) that SSH self-signed certificates are made up of the host name and the domain name of the router.

  I worked on a network of customers and I can see that the RSA SSH certificate uses the old hostname of the device + name field but SSH works always inbound and outbound on the VTY lines!

  I thought you were to related keys and recreate it using the encryption key generate rsa command to continue using SSH after a host name changed so that the new certificate contains the new host name?

  Any explanation would be greately appreciated

  Thank you very much

  David

  Hi David.

  Yes after having modified the router setting hostname, SSH domain name will still work with the old certificate.

  What I can suggest is you to recreate through cryptographic key generate rsa command in configuration mode.

  HTH

  Concerning

  Carlo

• How to change hostname of Service Management

  Hello
  How can I change management Service Hostname in OEM grid Remote Agent configuration?
  
  I did a graphical installation, but it could be this option below the command line tool - URL of the repository
  
  -bash - $3.2. / emctl status agent
  Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 10.2.0.5.0
  Version of the WHO: 10.2.0.5.0
  Protocol version: 10.2.0.5.0
  Home Agent: / usr/local/oracle/OracleHomes/agent10g
  File binary agent: / usr/local/oracle/OracleHomes/agent10g
  Agent process ID: 8078
  Parent process ID: 8032
  Agent URL: http://hostname1.com:3872/emd/main /.
  URL of repository: http://hostname2.com:4889/em/upload /.
  Started at the: 2011-09-22 09:08:41
  Started by user: oracle
  Last reload: 2011-09-22 09:08:41
  Last download successful: (none)
  Last attempt to download: (none)
  Total megabytes of XML files uploaded so far: 0.00
  Number of XML, files awaiting download: 56
  Size of the XML files in the upload wait (MB): 14.48
  Available disk space on the file upload system: 50,91%
  Last attempt heartbeat to WHO: 2011-09-22 14:24:31
  Last pulse in SGD: unknown
  ---------------------------------------------------------------
  Agent is running and ready
  -bash - $3.2
  
  Thank you
  
  Edited by: 872550 Sep 22, 2011 07:34

  Hello

  I believe that you SGD now on hostnamex (instead of hostname2) and if you want to change REPOSITORY_URL to the Agent.
  This is what we call reconfiguration management officer to point to a new SGO. Here is the link to the documentation that contains the exact measurements:
  http://download.Oracle.com/docs/CD/E11857_01/EM.111/e16790/ha_agent.htm#BABDFBGA

• How to change the value programmatically combox

  

  Here, if I press the button Combobox should change led should turn on if I press OFF button Conboxbox should change to OFF & Led should turn OFF.

  How to do that using the schema property to which I must take to the drop-down list box.

  Thanks in advance

  I found the solution. Thanks Peter. I use whole combobox.

  

• How to change digital controls programmatically and radix indicator?

  Hi all

  I need to know how can we change the radix of CNC digital indicator while the program is running.

  Kind regards

  Pramod M G

  Right.  Sorry Format-> display Format

  

• LaserJet 4250dn: how to change hostname?

  I need to change the 'HOST NAME' of several laser printers.  In the past, I've always used a print server or on a peer-to-peer network, I used the Ip address.  This year, for this client, I'll have to use the printer host NAME, because they no longer support static IPS, that is not a problem, except that it has been long since I changed the host names on some models.

  in any case, on a 4250dn of HPLaserjet, I discovered where in the printer control panel to change the name of 'host' and I found how to change the characters. but, for the life of me, I can't figure out how to put end the new name or how to set the printer to save the new name.  This last statement has no presence?  Example: I wanted to change the name of 'NPI895IE' to 'Make PRESSURE' I can't figure out how to remove the letters that come after the number 9 and how to record record everything that at that time there.  I know it's probably very easy and I'm just a bonehead, but can someone help out me?

  Your help is greatly appreciated!

  Ken

  Ken, use the webserver built into the printer and it will be a piece of cake.

  Set the printer's IP address in the browser's ADDRESS bar, and after that open built-in Web server click the Networking tab.

  You may need to click out around a bit to find the host name, don't forget after you change you must find the button drop down, down and give a click.

  While you're there disable protocols you do not use and put a password on the web server integrated

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• How to get notification of change of mode programmatic ringtone?

  Hi all

  Sort for the notification of babysit mode ringtone change?

  http://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationglobalsettings.h...

• Change theme App programmatically?

  Hello guys,.

  Is it possible to change the theme of the app (light or dark) during the execution of app (running).

  Thank you

  Hello! There is no known method to change during the race, only at startup:
  http://supportforums.BlackBerry.com/T5/native-development/change-theme-edit-quot-bar-descriptor-XML-...

• How to change hostname? R12.1

  What is the correct method to change the host name of a machine running R12.1?

  How to change the host name to E-Business Suite Release 12 on single node (Doc ID 1277556.1)

  -Coco

• How can we change artboard rectangle programmatically by?

  Hello

  I want to change the values left, top, right and bottom of the rectangle work plan.

  I found the API () AIDocumentSuite::SetDocumentCropBox and play it as below

  AIRealRect cropBox = {0, 850, 1700, 0}; left, right, up, down

  error = sAIDocument-> SetDocumentRulerUnits (kCentimetersUnits);

  error = sAIDocument-> SetDocumentCropBox (& cropBox);

  error = sAIDocument-> RedrawDocument ();

  After that, the document will appear as in the file ArtBoard.jpg (attached here).

  Thus, this .jpg files which Im guessing is, a new art is created instead of change values already present work plan.

  I don't want to create a new work plan, I just need to change the values of work plan rectangle. How can I do this?

  Another option is to use the AICropAreaSuite (AICropArea.h). This will work best if you are looking to modify a plan of work among many others in CS4. This should work if there is a work plan or many work plans. Simply call AICropAreaSuite::Get() and who will get "properties" the nth work plan, which is an AIRealRect. Then call AICropAreaSuite::Update() when you are finished.

  Properties AICropAreaPtr = 0;

  sCropArea-> Get (i, & properties);

  change the properties-> m_CropAreaRect

  sCropArea-> update (i, properties);

• How can we change an image programmatically in the DataGrid cell

  I have a DataGrid that contains a status icon. I was able to get the initial to display in the DataGrid control status icon. But I'm unable to update the computer. Basically, I need to update the image of a selected line with a "assets/processing.png", ' assets/success.png' or ' assets/failure.png' image. I can't seem to be able to find a way to access the image in the cell need to update/replace it. I tried to give him a property from my collection ArrayCollection data provider, but it does not work. I also tried some how to get a reference to the original image, so it can be replaced, but can not understand how to do such. Here is the code for my DataGrid. I'll be very grateful for any help in this. (I'm relatively new on Flex/ActionScript, but a developer experienced otherwise).

  <mx:DataGrid id="myDataGrid" left="0" top="0" bottom="0" right="0"
                       allowMultipleSelection="true" verticalScrollPolicy="on"
                       draggableColumns="false" resizableColumns="false" sortableColumns="false"
                       dataProvider="{myArrayCollection}">
              <mx:columns>
                  <mx:DataGridColumn headerText="Name" dataField="name" wordWrap="true" />
                  <mx:DataGridColumn headerText="Status" dataField="status" width="75" textAlign="center">
                      <mx:itemRenderer>
                          <mx:Component id="statusComponent">
                              <mx:HBox id="imageBox" width="100%" height="100%" horizontalAlign="center">
                                  <mx:Image id="statusImage" source="@Embed('assets/pending.png')" width="16" height="16"  />
                              </mx:HBox>
                          </mx:Component>
                      </mx:itemRenderer>
                  </mx:DataGridColumn>
              </mx:columns>
          </mx:DataGrid>
  

  The image must be a property of the arrayCollection collection.  You can either save the image url as a property of type string, or if you must nest, then you can create an actionscript for each image object in a script (private var image1:Image = Image(); image1.source=@embed...)

  Then, in the code that processes the event that causes the image must change, replace the image property of the collection arrayCollection member (s) concerned. Then, at the end of the code for the event, trigger the DataGrid to update using the method myDataGrid.invalidateList ();

  Mark

• How to change HTTP port programmatically?

  Hello
  
  I would like to know if it is possible to change the http port on a server managed by program without repeating the server?
  
  Could it be perhaps with a JMX MBean?
  
  Greetings,
  Améo

  Hi Améo,

  One more thing... As soon as you accelerate that program... Once the server change port, you will get "* PeerGoneException *"... This is because the Server Port is changed... Now the MBeanServerConnection object no longer able to be connected to the old Port. It's good... So when you write try {} catch {} block to handle this exception, and then create a fresh MBeanServerConnection to connect save() and activate().

  Please mark the thread as answered as well... ;) Just for the simplicity of a few users who comes to read messages answered...

  Thank you
  Jay SenSharma

  Published by: Jay SenSharma on February 25, 2010 20:56