Change in CPU satellite P300-1 has 0

Similar Questions

• Satellite P300-1 has 8 - part number for the AC adapter / CC

  Hello.

  Can anyone tell me the part number of the AC adapter I need to buy for my Satellite P300-1 c 8?
  Model No.: PSPCOE-01H008EN 15550 / 1024/1024/160 G 54/17W + BT/D52/L/M/L

  The toshiba site list or recognize the model, CarPhone Warehouse does not provide me with detailed documents and the original adapter was stolen. If not, can anyone provide an email address for toshiba (I am unable to call during their office hours).

  Or failing that, some general tips on an adapter compatible Please, I bought an adapter for the correct base - 19V, 3 specification. 95 a, (75W), Connector (PA3715E-1ACE) 2.5/5.5mm however, it does not work. The toshiba site lists another card of the same specs (PA3468E-1AC3) but I am reluctant to risk without being sure that it is just to buy it. I'd be happy to buy a universal adapter but only a high quality which will not be an electrical danger.

  Thanks in advance for any help.
  Clare

  Hey Buddy,

  You can search for options and accessories here:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/PC-options-Accessories-EU/

  Why you need an email at Toshiba?
  If you have questions about spare parts, you must contact a Toshiba instead authorized service provider.

  In general, I would recommend the original adapter because it of tested and designed for your laptop. With other words, it s a product of high quality.

• How do I reinstall Satellite P300-1 has 2?

  Hello! I really need help with my Satellite P300 - depending on how (with basic English) delete all my files on the computer, and then reinstall Windows Vista. I've read thorugh a lot of topics, assistance to users and others, but can find no solution at all.

  Because I know that some BIOS-based and other stuff, so I would be grateful if someone could explain to me step by step, how to formate (?) my computer everything and then reinstall Vista.

  I'm sure he was following no CD with the computer when I bought it, 70%, so in other words, I don't have any CD of Vista!

  Thanks - I'll be happy for any kind of answers that you believe can help out me

  Hello

  Just a question: have you already installed another version of Vista or not?

  In addition, I put t understand why you didn t read the user manual
  The point is that you must create a recovery disk Toshiba by yourself using the Toshiba Recovery Disk Creator. This tool is preinstalled on your laptop and so you can create a Setup disk.

  You can boot from that disk to reinstall Vista or other, you can use HARD drive recovery. You can start it if you go into the advanced boot menu and select Repair my computer. Then follow the instructions on the screen and Windows will be automatically reinstalled. With HDD the only function the first recovery partition will be wiped off so you can back up your files on the second partition.
  Here's more information: http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  But I really recommend you read the manual before doing something. It s very interesting! ;)

• Satellite P300-1CN has installed Bluetooth?

  I just bought this laptop bluetooth anf it says on the box, but I can't seem to find it anywhere

  Can any1 help me at all and tell me where it is and how to enable it?

  Hello

  I checked the specs on the Toshiba Satellite P300-1CN site and it seems that this laptop is not equipped with Bluetooth so that you can t enable this :(

  You can only buy an external Bluetooth USB adapter. It s not expensive nowadays and you can therefore use Bluetooth too! :)

• Satellite P300-1 has 8 can't get recovery plant to work

  Hello

  Had many problems on this machine. It started with a nearly full C: partition which has Vista to invoke a disk compression.

  After that the laptop boot; After the POST, there's just a blank screen (no blinking cursor). Water from the tap "F8" solution of the manual would not work.

  Without boot system, I tried to use a Vista recovery CD. But it would not even start, even after setting the BIOS to boot from CD first, or even using F12 boot selection screen.

  I had to physically remove the hard drive from the laptop to get the boot CD. But obviously could not do much after that thing. At this point I think that the hard disk compression utility had corrupted boot sector.

  So I plugged the hard drive of a PC desktop, saved all the 3 partitions (1 hidden more 'Vista' C: and D: that holds files HDDRecovery)

  I tried formatting and disk and present the scores. This is the point I have problems with that.

  I used Boot us software to make the first hidden partition which is what it was. Hidden. In addition, let him without assign a drive letter.

  On the second partition I used windows backup to restore the C: drive, this software does not restore all the files the way he left the most important such as Winload.exe, that is why I had to do a factory restore.

  On the third partition, I restored the folder "HDDRecovery".

  Now, after you change the BCD file, I was able to get into the recovery environment Toshiba from a bootable CD that I created from the hidden partition.

  The problem I am having now is this resumption of the factory is a failure because it can't find files HDDRecovery, error, it turns out is:-'the operating system recovery is impossible! Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer.

  I assume by "second disc", they hear second partition. Because when I did a test with a different partition scheme, leaving aside those hidden and have just the c: "Vista" partition and D: "HDDRecovery" partition, I managed to get past this error. But was then stopped by a cheque of Diskpart that looked like for 3 partitions. I added a third partition to see to who would do and completed Diskpart is check selected the second partition and deleted! Note that the score had HDDRecovery files on it.

  I hope I explained it well enough, my apologies for the length of the post.

  In short, I would like to get the recovery environment factory to work because the changes to the hard drive partitions.

  Hi, mate

  Unfortunately, I don't think you can get factory settings with same folder of hard disk recovery. I had the same situation as you. I wanted to install Windows Xp on my A500 and did not have a recovery disk. So the missing factory settings and no recovery disk was available. I didn't pay a price for a recovery disc. I just got the disc to copy windows 7 installed with all drivers and applications that I need. Then do a hard disk image of my current operating system with acronis true image, created a recovery area and that's it. Now, if I want to restore the Os, I just press f11 at startup, enter acronis and it restores from disk image. Need me 10 minutes of waiting...

• Satellite P300-1 has 8 - password requests when you turn

  Hello

  I bought a P300 Carphone Warehouse for years as my first laptop, but because I am not versed in computer things, I thought that he had broken causing buy me a new acer laptop.

  Yesterday, I found the laptop and tried to put on with a spare magazine and discovered that it was not the laptop, which was broken, but the actual charger wire has been damaged, so it worked yesterday but when I tried to turn it on this morning he asked me a password to 8 digits in a blue box.

  After 3 incorrect ones, it would be closed.
  A friend told me that it is a bios password and I was hoping if anyone knows the password because I threw away the manual who died in 2007.

  Thank you in advance!

  BIOS password is the individual password and not a standard password that you can find in manuals s or any other official document.
  Someone put this password and the laptop is now locked.
  All you can do is check the Toshiba authorized service provider and allow them to remove this password.

• Questions on change of CPU and the invalidation of permits

  * Original title: Hobby Builder Question

  I built my own systems since 1996, and in general, I would like to do two things... buy a copy of the sales at retail (for portability) and run it through up to 3 systems before you buy a new.  Usually my builds contain only a few new parts, that I update a couple of times a year.  I never had problems with Win 3.1, 95, 98, ME, XP or Vista.  In fact, I always have an original game of 3.5 "diskettes for Win 95 and CDs for 98 and XP.  in 2009, I bought a laptop that came with Win 7 Home Premium.  (A Toshiba Satellite A215).  I had to replace the HARD drive in this laptop and he had done professionally in a store (I was not familiar enough with laptop Desk computer architecture vs, so he had to) and technology has made a minor repair job and installed a HARD drive new, unformatted.  He then installed his own (OEM/System Builder multi-license) copy of Win 7 Pro and only charged me for installation costs ($49).  He was and still is active.  On my desk.  I built 1 system in the last years of 7 (built in 2014) I used a copy of the OEM System Builder from Win 7 HP x 64 SP1.  Time for a new building... from scratch.  I bought a single copy of the version of OEM Windows 7 Pro x 64 key to a sale to the retail/wholesaler. This will cause me any questions?  (I intend to upgrade to win before July 10 deadline, but I want to get all moved from the old system to the new system first) Once I have all my important files transferred, I'm decommissioned from the old system to use parts of upgrade of the wife (she has an old system of 11 years with Vista still on it) as long as the Build for his own use my old motherboard, can I transfer my license on his machine? This would include a change in CPU? (He currently has an AMD Athlon X 4 860 K, but I'm going at it in an APU A10-7850 matched with a suitable for Dual Graphics GPU)  All this work will invalidate the license.  The SSD containing my OS will be part of its upgrade of the system, as well as the motherboard.

  I'm extremely tech savvy, but am not a PC manufacturer or an authorized, I just take advantage of construction machinery.

  Sorry so long a post.  Want just as much information shared for a good answer.

  Thank you

  Once installed and activated, OEM of Windows licenses do not have transfer rights.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  When I install a preinstalled (OEM) or the retail version of Windows 7 or Windows 8/8.1 Windows 10 license, this license OEM to remain or become a retail license?

  If you upgrade an OEM or retail version of Windows 7 or Windows 8/8.1 for the free Windows 10 update this summer, the license is consumed in it. Because the free update is derived from the basic qualification license, Windows 10 will be that too many licenses.

  If you are upgrading a retail version, it carries the rights to a commercial version.

  If you upgrade an OEM version, it carries the rights of an OEM version.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM:

  OEM of Windows versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What happens if I change my motherboard?

  In regards to the OEM license , this would negate the 10 Windows upgrade license because he is no longer a qualifying previous base license that is required for the free update. Then, you will need to purchase a Windows 10 full retail license. If the license of basic (Windows 7 or Windows 8.1) qualification was a full retail version, then Yes, you can transfer it.

  Since the final Windows 10 user license agreement:

  b. autonomous software. If you acquired the software as a standalone software (and also if you upgraded the software you have purchased as a standalone software), you may transfer the software to a different device that belongs to you. You can also transfer the software on a device that belonged to someone else if (i) you are the first user under the software license and (ii) the user agrees to the terms of this agreement. You can use the backup copy that we do or the media the software provided on transfer the software. Whenever you transfer the software to a new device, you must remove the software from the previous device. You can not transfer the software to share licenses between devices.

• Re: Question on Satellite P300-18Z

  Hi all

  I have a few questions on the Satellite P300-18Z.

  What "video output" this laptop have? (DVI, s-video or d - sub)
  Can I connect the laptop to a LCD - TV screen and watch movies on 1080 p resolution? (full-HD)
  What is the warranty on this laptop?

  Hello

  According to the specifications of the computer laptop Satellite P300-18Z has monitoring interfaces:

  DVI - no available DVI port
  HDMI - HDMI (HDMI port available output) output
  Headphone plug - made externally available (stereo) headset
  . Link - iLink (Firewire) port available
  Line in Jack - No Line in Jack port available
  Output Jack - out Jack available, no line line
  Microphone plug - plug for external microphone
  TV output - port (S-Video port available)
  VGA - VGA (RGB port external monitor port)

  Also you can connect it to your LCD TV using an HDMI cable.
  Guaranteed according to countries and that clarifies your local dealer, but I know that all products guaranteed Toshiba standard of 1 year and 1 year international warranty. You can of course extend.

• Satellite P300 - 175 Numpad question

  Hello

  My 1 year Satellite P300-175 has an annoying problem:

  When I type 14 or 15 on the pad I have 146 or 165 output. I need to wait half a second to type 4 or 5 after the 1, then the problem is not occure.

  Someone at - it any idea why this happens and how to solve?

  TNX
  RVE

  Hello!

  I don't really have an idea, but it would be interesting if you have the same problem with an external keyboard (USB).

  Maybe it's a hardware problem and the keyboard is defective but for this contact the local ASP and ask for help. These technicians will help you solve this problem.

  Good bye

• WiFi with the Satellite P300-135 problem

  Hello

  Here's my problem:

  I removed VISTA and installed XP on my Satellite P300 - 135 (PSPC4E). After that, I downloaded all the drivers for XP and installed. But the wireless card is not recognised and in Device Manager there are two features of problem:
  -Device on high definition audio bus modem and
  -Network controller.

  I remember well the type of my wireless card and tried first with Realtek, but it did not work. Then I tried with Intel and Atheros drivers, but they do not have too much work.

  I hope someone can help me, because I don't want to go back to VISTA.

  Hello

  According to the specifications of the laptop Satellite P300-135 has Intel 11 a/b/g (13ch) - Golan WLAN card.
  Have you tried installing WXP driver for WIRELESS Intel network card?

• Satellite P300 - 219 PSPCCE - what should be the optimal heat of CPU?

  Hello there;

  I use for my laptop Satellite P300-219 (PSPCCE) newly bought about a week now. When you type I can't help noticing, the place where I put my left hand, I want to say the empty space to the left of the touchpad, feels much too hot. I looked for the manual and I have learned that it is where the CPU.

  Then I searched for a way to measure the heat of CPU, and after having tested some programs with too many different measures, I led to believe that the 'CPUID hardware Manager"gives the best results, after you set the correct value TJUNCTION.

  Here are the steps I get today while typing this message:

  ACPI hardware monitor
  Temperature 0 45note ° C (112 ° F) [0xC6E] (THRM)

  Intel Mobile Core 2 Duo T6400 hardware monitor
  Temperature 0 56a ° C (° F 132a) 0 x [31] (Core #0)
  Temperature 1 54a ° C (° F 129a) 0 x [33] (Core #1).

  Monitor hardware ATI Mobility Radeon HD 3650
  53A temperature 0 ° C (° F 127a) (GPU Core)

  Hardware Hitachi HTS543232L9S monitor
  Temperature 0 37â? Â ° C (98A? Â ° F) (0 x 25) (Assembly)

  From now you mind, windows taskbar indicates that I use roughly about 15 & 35% CPU. After a little use, I even though the CPU heats by a maximum of 69a ° C.

  The truth is, I don't know what to do with these readings, is my laptop which works very well, or he has problems? Could someone please tell me what should be the optimal level of heat for a P300, or where I can learn?

  Thanks in advance.

  Hello

  In my opinion, everything is ok with your laptop, buddy and the temperatures are quite good. Don t be to worry about this!
  If your laptop could overheat, it would have to close or freeze immediately. If this isn't the case, everything is ok with the temperatures.

  What you can do is to change the cooling method in Windows power management. Here, you change between performance and battery optimized cooling.

  By the way: you should also clean your laptop at any time. I clean my laptop every 3-4 months using a jet of compressed air. This blows the dust from the cooling fans.

  Welcome them

• Satellite P300 - changed keyboard

  Well, I'm running a Toshiba Satellite P300 and I'm having the problem.

  I just returned it to repair and they changed the motherboard. I've updated the BIOS. I did a clean installation of the operating system to Windows 7 which. I don't have this problem before he went out for repair but now when I press the Num Lock key, it becomes my keypad numbers, as expected, but also modifies the right side of my keyboard to numbers together which is very frustrating.

  I've been surfing for 2 days online find a solution to it and has even called the tech who was in charge of the repair and no one has all the answers for me.

  And another problem after repair: without the model name, part number and Serial Nr
  [PC information | http://forums.computers.toshiba-europe.com/forums/]
  Model name * yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
  * Part number * yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
  No number of * Serial *.
  Version of the OS Microsoft Windows 7 Ultimate 6.1.7600
  Version of the BIOS V3.30
  Processor AMD Turion (TM) X 2 Dual-Core Mobile RM-70
  Physical memory 4096 MB RAM
  449,892,560,896 of hard drive capacity [byte | http://forums.computers.toshiba-europe.com/forums/] 418.995 [GB | http://forums.computers.toshiba-europe.com/forums/]
  Drive hard free space capacity 147,790,635,008 [byte | http://forums.computers.toshiba-europe.com/forums/] 137.641 [GB | http://forums.computers.toshiba-europe.com/forums/]
  Video ATI Mobility Radeon HD 3650 version = 8.634.1.0
  Screen resolution 1440 x 900 Pixels
  Color quality, true color (32 bit)
  Audio version of high definition Audio Device = 6.1.7600.16385
  High definition Audio Device version = 6.1.7600.16385
  Atheros AR9281 Wireless Network Adapter network = 8.0.0.325 version = 00:21:63:61:13:EC MAC address
  Modem HDAUDIO Soft Data Fax Modem with SmartCP version = 7.68.0.50
  Internet Explorer 8.0.7600.16385
  IDE device TOSHIBA MK2552GSX ATA Device
  DRM ENGD67O5IR85 SCSI CdRom Device Firmware = 3.5Z
  HL-DT-ST DVDRAM GSA - T50N ATA Device Firmware = RT03

  Hello

  In your case I remove the keyboard from the Device Manager and reboot the laptop. After that Windows recognizes the keyboard again and install it. It happens automatically.

  Also, make sure the keyboard language in Windows.

• Satellite P300-275 - Crash when CPU at full load

  Hello everyone

  I have a Satellite P300 - 275 (PSPCCE) and a big problem after maintenance rear.

  When i games (average after 15 min Details CSS, ops black 15 min, 15 min bulletstorm...) and CPU it fully charged, my computer crash and I have to wait a few minutes before resuming.

  I'm doing some tests, but I don't know how it can solve the problem.

  -Test Prime95 (connected)
  Tested during a night and no problem, no crash
  http://ImageShack.us/photo/my-images/829/resultats.jpg/

  -Test OCCT (connected)
  Being tested for an hour, the temperature rose to 90 ° C but no problem, no crash

  -Test Memtest86 + (connected)
  I tested the two strips together and then each band separately and the pc crashed after 10 minutes (2x2gb DDR2-800)

  -Test FurManrk
  -He led for 15 min, 4 average fps on battery, no problem!
  -It ran for 30 seconds, 8 average FPS with battery and crash!
  -He ran for 30 min, 4 fps average, on battery, and then I plug the sector, crash after 30 seconds!

  Someone has an idea?

  THX

  Hmmm I have a few ideas.

  First of all, you should check if the laptop cooling modules are free of dust and debris.
  This prevents air circulation and cause of high temperature.
  In addition, make sure that there is enough free space around the laptop.

  Second idea; Use the Toshiba display driver. This driver supports protection of the GPU overheating. Use of that other drivers could lead to high temperature.

• Satellite A100-756: no option in the BIOS to change the CPU usage

  Hi guys,.

  recently bought a satellite A100-756 laptop with core duo of intel clocked at 1.86 Ghz. When you look in the BIOS (version 2.00) the only options allotted to me is to dynamically the CPU frequency mode are 'always low, or dynamically switchable. There is no option to set the processor to operate at "still high". my friend who has a 2 years old satellite said that, on its model, there is the possibility to "still high".

  Toshiba HWSetup also lists only the mode options for dynamic as either «always low or dynamically switchable» cpu frequency I was wondering if anyone has done to put the option to always high, or if there is an update the Bios or software Toshiba that would allow this option for 'high alyways?

  Congratulations for all help people!

  Hello

  As you may knew that the Toshiba Power Saver tool is preinstalled on most Toshiba laptops.
  This tool allows to change the CPU, the speed of processing, cooling method, using standby and hibernation, etc.

  To change the speed of the CPU or the cooling method, you will need to enter the energy saver, then select the basic settings tab.

  PS: All these settings can be configured for a different power profiles. Therefore, you must configure the settings of the profile that you will use for most of the time.

• Satellite P300 PSPCCE: I want to delete or chang splash screen at startup

  I have laptop Satellite P300 PSPCCE and that you want to remove or change home screen starts to start the laptop.

  Is it possible to do? My Bios version is v3, 40

  Hello

  What you want to change?
  As far as I know, you can change the option of quick start or normal startup.
  Anything else is not possible.

  PS: this option should be available in the BIOS settings.

  Welcome them