Change in DNS server

Similar Questions

• Change the DNS server automatically when switching to WiFi network?

  I am usually connected to one of the two wifi networks, one I have control on and I'm not. When I am connected to that I have no control over, I usually spend my DNS settings of the network server (which often breaks down) to a third party one, but I end up having to do this every time. Is there a way so that it would automatically change my DNS server whenever I connect to this network? I am running Windows Developer Preview

  Hello

  ·         What operating system do you use?

  ·         Your computer is on a domain network?

  Try these steps and see if it helps.

  Step 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

   

  Step 2: Try to reset TCP/IP and check.

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

   

   

  Step 3: Uninstall and reinstall network/modem driver from Device Manager.

  (a) click Start, type Manager of devices in the search box and press ENTER.

  (b) Device Manager window opens, expand the network card.

  (c) right click and uninstall, reboot the system.

   

   

  Step 4:

  Follow the steps in troubleshooting from the link and check if that helps.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

   

  Step 5:

  Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Reference: http://windows.microsoft.com/en-US/windows7/DNS-Domain-Name-System-frequently-asked-questions

• Change of DNS server for VPN clients

  I'm changing the DNS server which gives my VPN to VPN on a Cisco PIX 515E clients. Does anyone know what command it will increase from 10.6.0.2 to 10.6.0.4? The software version is 7.2 (3)

  Thank you.

  Usually, the DNS server is assigned in the relevant group policy, that clients use to connect. Please see this link for more information on the syntax of the command line.

• Changing the DNS server for ESX hosts?

  Our network administrator will change the IP address of the DNS server.  In this way, we will change those corresponding to ESX hosts.

  We would like to know

  (1) can we change the DNS server on execution of the ESX hosts without going into maintenance mode?

  (2) under what circumstances the ESX host will do use DNS servers?

  (3) memory, we should add all the IP addresses of ESX host in the hosts file in the Service Console, where is this hosts file located at?

  Thank you

  Tony,

  Use "service network restart" command to restart the network service

  Do not forget also that...

  Very dependent on DNS HA, HA will not work without the correct DNS configuration. The servers ESX and vCenter server must be able to resolve the name (FQDN full) / IPs in both feel to get a working HA.

• Change the DNS server, but consider e-mail to Office 365

  I now have a customer who wants his site softdanmark.dk moved and accommodated with catalyst for business as the new design I've done for the company by muse and previewed as: softdanmark.businesscatalyst.com.

  I've already added the domain name to Business Catalyst and gave him the dns data, but he still wants the email (MX) belong to the TDC, where he has his Office 365.

  Is it possible to only move the DNS server and keep the MX record at the old company?

  

  Hope you can answer my question.

  Hey there,

  You do not change the NS records, all you need to do is point the web traffic, so yes, have your screenshot you just need to change the record and when you set up the site in British Colombia you say outside.

  Registration information are:

  Adding a domain name to your site and take the live site

• can not change the dns server, always comes back.

  10.10.5 Yosemite

  My ISP has provided DNS servers are terrible and I still get messages "site is not reachable. I'd like to change the DNS from Google or Open DNS servers

  In SYSTEM preferences > network > DNS tab I delete 2 default entries & entry "8.8.8.8" & "8.8.4.4" (google dns)
  In the "areas of research" box, there are 2 entrances & I can't delete them.

  I click OK & apply - when I go back to the DNS tab, it was the old DNS.

  What should do?

  

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.systempreferences.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

• Windows cannot communicate with primary dns server

  Hey everybody.  I have a home network, wired PC, 1 wifi 1.  WiFi works fine.  wired network printers work well, other computers (laptops work fine both wired and wireless.)  I have a PC (VISTA), which now gives me the "windows cannot communicate with primary dns server.  This has happened a couple of times, but a reboot fixed things.  Once I had to change primary dns server from automatic to 208.67.222.222 (who got to this site), it worked.  Now, the same error, but nothing works.  I have tried in both directions between the DNS auto numbers listed here, also, have tried the following:

  ipconfig/flushdns
  ipconfig/registerdns
  netsh interface ip reset reset.log
  netsh int ip reset resetlog.txt

  and had windows try to reset the DNS of countless times.  Nothing works.  The upgrade to W7 eventually will correct this problem?  Another question, my wife insists on the use of AOL software (I know, I know), even if all that she uses to is by e-mail.  She says she loves interface.  A chance that caused this problem?

  Hello

  1. have there been recent changes to the system before the show?

  2. the problem occurs only with specific applications?

  Method 1:

  Follow the link and follow the steps proposed by Shekhar S and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-communicate-with-primary-DNS-server/9043f785-2f4e-4CC1-ADF5-6ba5ca413749

  Method 2:

  Follow the link below and follow the steps. Check if it helps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  I also suggest you to run the command in the command prompt and check where the Windows Vista computer is pointing to DNS and DHCP.

  ipconfig/all

  Post back with the results in this thread.

  Let us know if it helps.

• Error, "DNS server does not" when connecting to the internet.

  IAM using windows 8 and iball netsetter. But I can not connect net. When I use mobile connect its connection. But in netsetter, it is not connected. Error troubleshooting network as "DNS server not responding do not. Help, please

  Try changin public DNS dns...

  How to change the address of the DNS public IPv4 DNS server in Windows?

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-networking/how-to-change-IPv4-DNS-server-address-to-public/56548e8d-eb9c-4FC5-807C-eefca5d278d0

• Change the DNS settings in the Pool of IP network

  Hello

  Due to a migration of our DNS servers, I have to change the IP addresses of the DNS servers defined in the (currently used) our BDE server IP pools. There is a Hadoop cluster with a large amount of data running using this pool and I do not have to deploy the cluster again. Restart of the cluster is not matter, so I planned the settings DNS for the cluster nodes have to change after reboot. Unlikely, I could not change the DNS settings. Is there a way (perhaps non-elegant) change those settings for the pool?

  See you soon,.

  Dustin

  Hi Dustin,

  BDE provides the interface to change the DNS server in the network added to the BDE.  You must change the BDE database to do.  Here is the solution:

  1 Server BDE connect you as user serengeti

  2. run this command: echo ' network dns1 set update = 'the_new_dns_server_ip' where name = 'the_network_name '; \q" | psql

  3. apply the new DNS server. There are two approach. You can choose one.

  (a) connection BDE CLI and run "cluster stop - name...". ' and 'start cluster - name... '. "to restart the virtual machines in the cluster, then the new DNS server will be applied.

  (b) on BDE server, run "serengeti - ssh.sh cluster_name " sudo sed-i of | nameserver. * | nameserver the_new_dns_server_ip| ' g' / etc/etc/resolv.CONF. The new DNS server should take effect immediately.

  Thank you for using BDE.

  Jesse @BDE

• How to change DNS server with bluetooth wireless in EnvyX2?

  I tried to change DNS servers on my HP Envy X 2 tablet with Windows 8.1 and did not see any network in Device Manager. With a non bluetooth network or a wireless adapter, you can go to the properties of the adapter and select 4 TCP/IP and entry servers manually DND, primary and secondary.

  With the envy of X 2, there is no network setting in Device Manager. There is a Bluetooth wireless adapter, but you can get in its properties at all?

  Anyway is to enter or change the DNS servers with wireless Bluetooth which lies in the desire X 2 Tablet?

  Thank you

  Sally

  Hello @minion22,

  Welcome to the Forums of HP Support!

  I read your post about the problem of the Bluetooth and wanted to help you!

  Bluetooth is a wireless connection to other Bluetooth devices, with its own communication protocol.  It is not a TCP/IP device, so TCP/IP parameters, such as the DNS addresses are without significance for her.  However, you can consult the following resources and let me know if the information was useful in the overall goal you're trying to accomplish:

  What is a Bluetooth personal area network (PAN) network?

  Connect to a Bluetooth personal area network (PAN) network

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• "No DNS server," "PPPOE server," "Internet connection" - WARNING amber

  I'm troubleshooting on iMac my parents - there is a problem with the configuration of the Airport Extreme. The iMac is fully updated.

  During the configuration of the airport, I get this chart:

  

  Under 'Of Carol Airport,' I can't seen to change the State of the servers DNS, server PPOE and Internet connection. The iMac works fine without the airport connected... but when you're connected, I get these errors.

  How solve the three errors and get the router working again? Please provide very detailed responses, if possible. Thank you!!

  The problem lies in the device upstream 'Carol airport'.

  Reset by it turn it off and leave it like that for a few moments. Internet service providers often suggest disconnect their cable from their device as well (not the Ethernet cable between it and the AirPort Base Station - please leave one connected). There should be no need of power towards the low 'of Carol Airport', but there is no harm in doing so, either.

  Then, connect it to power again, and reconnect the cable if you disconnected it. Give it a moment to start to finish. Connect the "Carol airport', if you we turned off.

  Please proceed to configure the AirPort base station by following the instructions.

• Request to another DNS server if the connection fails with the current

  Hello

  I would like to ask whether there is an available addon or a feature hidden in Firefox, which allows him to activate try to use other DNS servers if a connection has failed to a server. Lets make an example, would be the best way to explain:

  1. I want to connect to Google.com
  2 Firefox / Windows prompts for the IP address of the DNS server
  3 Firefox attempts to connect to Google but fails (the site had long to answer, for example)
  4 Firefox will try another DNS server, that you entered in your Page of DNS IPv4

  Or Firefox already do this? Because sometimes it fails to connect to a server when you use a special DNS server. If I change the settings to another DNS server, it works.

  Thank you

  Please upgrade to version 20.

• Static IP address of WiFi requires the DNS server

  I was able to confirm this on two separate MacBook Pro (various models) the two Yosemite running 10.11.4.

  After assigning a static IP address to the wireless network interface, the MacBook ping to a address beyond the gateway by default unless there is also a DNS server on the wireless interface. I wouldn't need a public IP address ping DNS server.

  For example:

  This method works.

  

  But it does not work:

  

  

  At least I have change the DNS like this:

  

  Then it starts working again.

  I tried to initiate a capture of packets and the MacBook is not even send ping on the wireless interface requests unless there is a static DNS server assigned.

  Can anyone other confirm/deny this behavior for me?

  Thank you

  Rob

  What exactly are you trying to do?

  You try to assign a Mac with a LAN IP address? If so, do it in the router by selecting an IP address on the local network to use with the Mac Machine (MAC address). This assumes that your router is your DHCP server. Otherwise, you need a DNS server that is running on your local network to be able to distribute IP of DHCP addresses.

• DNS Server: Issue of SOA server of El Capitan

  Hello

  How ASA can be defined on El Capitan DNS server?

  The server reports the name of domain (example.com) as SOA indeed, but some services (secondary server DYNDNS services) seems to expect the SOA for the primary server, as in this case ns1.advedi.com

  Currently, for the main server, I have a mac mini to the latest version of El capitan server allowing the transfer of area and as secondary servers a (server) 10.6.8 snow leopard running a DNS server secondary DynDNS service.

  The two secondary servers report the same problem with the SOA

  domain name: example.com

  main server: ns1.example.com (main server, which allows the zone transfer)

  secondary server: ns2.example.com (taking ns1.example.com information)

  servcie dynDNS (taking ns1.example.com information)

  I don't see on the GUI how to put in place. I need to change the area?

  Thank you

  Some DNS more 'health' check reports (several sites regarding the same):

  • SERVFAIL DNS when querying 208.76.60.132 for SOA

  (secondary servers, the same two answer)

  The main server allow zone transfer, so I do not understand why it is like that.

• DNS server records to monitor traffic.

  I do not understand much about it so I hope someone can explain to me.

  I have a server configured with a DNS server running successfully on my mac mini (dns primary server for the House).

  I was wondering if there is a way to capture the DNS server logs and monitor visited Web sites of specific host ips/name?

  I don't have an example to make immediately available, and I expect that it will be the analysis or an output channel created manually or otherwise searching the DNS server connects.

  If your firewall blocks all outgoing DNS traffic except for DNS queries on the server (this is to avoid without entering the DNS server, register via VPN or other), you can turn on extra logging through the command line, and then check the DNS server logs.

  This configuration is probably more commonly implemented with either a network sniffer I look for DNS queries arriving at your server, or perhaps a web proxy server, as this proxy server gets you the customer information and the target host information, as it won't be all kinds of activities related to the web-is in the DNS for a typical client newspapers.

  Activity network Apps, app updates (various which may seem HTTPS traffic, too), multiple streams of data, etc.

  HTTPS and VPN can throw a key in these listening and data collection activities, unfortunately.  They can hide the access or hide the DNS query, according to the monitored computers.

  There are approaches especially here, including the firewall of filtering (or notation) and the mechanisms of OS X such as Parental controls, depending on the specific details of your needs here.    There are examples posted around the network to use Wireshark or tcpdump to acquire the DNS of your network data, as well.

  Details on the management of the BIND 9 command line - i.e. when there is hair - are available in the ISC BIND documentation, such as 9.10.  Find statement grammar and record the setting up an output channel, as a starting point.

  For recent versions of OS X Server, BIND configuration files are under/Library/Server.  (See this discussion, as well.)

  Changes to the configuration files can sometimes fail.app, unfortunately.   Close.app, make the changes to a copy of the file, then restart.app (and I hope Server.app don't spill or undo your changes).