Change in iPhoto as default again

Similar Questions

• "How to change the gateway by default from the command prompt"

  "How to change the gateway by default from the command prompt"

  How to change the default gateway on the windows command line

  Microsoft Windows XP - route

• I have a pavilion dv7 7000. I want to change my card to default chart to 630 m not intel nvidia gc.

  I have a pavilion dv7 7000. I want to change my card to default chart to 630 m not intel nvidia graphics HD 4000.

  Hello

  Go in the NVIDIA Control Panel, and then select manage 3D settings.  Now, click the global settings tab, and then select it Auto drop down. Now select processor High Performance NVIDIA.

  The drawback with the above is that you will consume more energy and your system can run on battery as long. An Alternative is to select the program tab and then just add the program you want to run on the processor performance, NVIDIA.

• Try to change from1 VLAN by default to 11issues with Force10s4810

  Hello

  I'm changing the vlan1 by default to 11, since I need to work with vlan 1 and tagged interface inside

  When I am running the below command I get

  SRV-CPTS-CORE1 (conf) #default vlan id-11

  % Error: VLAN existing cannot be set on default VLAN Vl 11.

  No idea how to do this?

  Please advice

  Thank you

  Thanks for the additional info. After doing some research it turns out that you can not make an existing VLAN in the VLAN by default. We have to run these commands, and it should work.

  #no int vlan 11

  #default vlan id-11

  Keep us informed

• How can I change orientation of the default print Windows 7 landscape to portrait painting?

  Original title: Windows 7 default paint print orientation.

  How can I change orientation of the default print Windows 7 landscape to portrait painting?

  I would not be forced to change every time I have use Paint.

  Thank you, Jay

  Hi Jay,.

  There is no option available to change the orientation of the default Windows 7 Paint print.

  However, you can set default print options to print landscape and impression accordingly paint program.

  For more information, see this link:

  http://support.Microsoft.com/kb/305402

  Hope the helps of information.

• How to change the font by default for the WORD program?

  I want to open the WORD program with a different default font than the one installed. Currently he is Calibri 11 and I want Times New Roman 12

  One of these apply?

  To change or set the font by default (2010)
  http://Office.Microsoft.com/en-AU/Word-help/change-or-set-the-default-font-HP010368862.aspx?CTT=1

  To change or set the font by default (2007)
  http://Office.Microsoft.com/en-AU/Word-help/change-or-set-the-default-font-HP010014408.aspx?CTT=1

  http://Office.Microsoft.com/en-AU/results.aspx?qu=change+Word+font&ex=1&origin=FX010064710

• I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!

  I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!

  Hi William,.

  Welcome to the Microsoft community.

  Batch file is a type of script file, a text file, containing a series of commands to be executed by the command prompt. When you run a batch file, it opens the command prompt to run the scripts.

  It would be great if you can answer the following questions:

  1. what happens when you try to run a batch file?

  2 are. what batch file you referring?

  3. the problem occurs for a particular batch file?

  First of all, I suggest you to check the commands written in a batch file. To do the same thing, just right-click on the batch file, and then click change. It will open Notepad with the list of orders scripted for this particular batch file.

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  jilll

  What version of Premiere Elements you use, what computer operating system?

  What would you update... have you had 12 and 12.1 updated or have you 13 and 13.1 updated? Or did you upgrade may 14 from a previous version?

  Where are you in the settings for your version where you get the message saying you cannot encode the video and you may need to change export settings?

  What is your planned export?

  Please explain, give more details.

  I will review your wire in the morning morning look to follow so that I can help you succeed in your Premiere Elements project.

  RTA

• How to change folder name by default when you use save for Web in java script?

  Hello everyone, hope you can help me.

  
  

  Photoshop has a folder name by default of images When you export using slices Save for Web . I need to change this folder name.

  How to change folder name by default when you use save for Web in java script?

  Thanks in advance!

  
  

  

  

  
  

  JJMack Chuck Uebele Nicolas Ribot SuperMerlin
  

  You can try with scriptlistener to record the code. Change to the last line of the NO to ALL dialog boxes, so that the dialog - if you wish. There are two places in the code to save the files: one where is actually saved the file, and the other where the default value is file. I have seen it changed something with it. So, you can simply use the first listing of a path in the code below.

  #target photoshop
  
  var idExpr = charIDToTypeID( "Expr" );
      var desc19 = new ActionDescriptor();
      var idUsng = charIDToTypeID( "Usng" );
          var desc20 = new ActionDescriptor();
          var idOp = charIDToTypeID( "Op  " );
          var idSWOp = charIDToTypeID( "SWOp" );
          var idOpSa = charIDToTypeID( "OpSa" );
          desc20.putEnumerated( idOp, idSWOp, idOpSa );
          var idDIDr = charIDToTypeID( "DIDr" );
          desc20.putBoolean( idDIDr, true );
          var idIn = charIDToTypeID( "In  " );
          desc20.putPath( idIn, new File( "C:\\Users\\csuebele\\Pictures\\LR shortcuts" ) );//Here's where it actually saves
          var idFmt = charIDToTypeID( "Fmt " );
          var idIRFm = charIDToTypeID( "IRFm" );
          var idPNtwofour = charIDToTypeID( "PN24" );
          desc20.putEnumerated( idFmt, idIRFm, idPNtwofour );
          var idIntr = charIDToTypeID( "Intr" );
          desc20.putBoolean( idIntr, false );
          var idTrns = charIDToTypeID( "Trns" );
          desc20.putBoolean( idTrns, true );
          var idMtt = charIDToTypeID( "Mtt " );
          desc20.putBoolean( idMtt, true );
          var idEICC = charIDToTypeID( "EICC" );
          desc20.putBoolean( idEICC, false );
          var idMttR = charIDToTypeID( "MttR" );
          desc20.putInteger( idMttR, 255 );
          var idMttG = charIDToTypeID( "MttG" );
          desc20.putInteger( idMttG, 255 );
          var idMttB = charIDToTypeID( "MttB" );
          desc20.putInteger( idMttB, 255 );
          var idSHTM = charIDToTypeID( "SHTM" );
          desc20.putBoolean( idSHTM, false );
          var idSImg = charIDToTypeID( "SImg" );
          desc20.putBoolean( idSImg, true );
          var idSWsl = charIDToTypeID( "SWsl" );
          var idSTsl = charIDToTypeID( "STsl" );
          var idSLAl = charIDToTypeID( "SLAl" );
          desc20.putEnumerated( idSWsl, idSTsl, idSLAl );
          var idSWch = charIDToTypeID( "SWch" );
          var idSTch = charIDToTypeID( "STch" );
          var idCHsR = charIDToTypeID( "CHsR" );
          desc20.putEnumerated( idSWch, idSTch, idCHsR );
          var idSWmd = charIDToTypeID( "SWmd" );
          var idSTmd = charIDToTypeID( "STmd" );
          var idMDCC = charIDToTypeID( "MDCC" );
          desc20.putEnumerated( idSWmd, idSTmd, idMDCC );
          var idohXH = charIDToTypeID( "ohXH" );
          desc20.putBoolean( idohXH, false );
          var idohIC = charIDToTypeID( "ohIC" );
          desc20.putBoolean( idohIC, true );
          var idohAA = charIDToTypeID( "ohAA" );
          desc20.putBoolean( idohAA, true );
          var idohQA = charIDToTypeID( "ohQA" );
          desc20.putBoolean( idohQA, true );
          var idohCA = charIDToTypeID( "ohCA" );
          desc20.putBoolean( idohCA, false );
          var idohIZ = charIDToTypeID( "ohIZ" );
          desc20.putBoolean( idohIZ, true );
          var idohTC = charIDToTypeID( "ohTC" );
          var idSToc = charIDToTypeID( "SToc" );
          var idOCzerothree = charIDToTypeID( "OC03" );
          desc20.putEnumerated( idohTC, idSToc, idOCzerothree );
          var idohAC = charIDToTypeID( "ohAC" );
          var idSToc = charIDToTypeID( "SToc" );
          var idOCzerothree = charIDToTypeID( "OC03" );
          desc20.putEnumerated( idohAC, idSToc, idOCzerothree );
          var idohIn = charIDToTypeID( "ohIn" );
          desc20.putInteger( idohIn, -1 );
          var idohLE = charIDToTypeID( "ohLE" );
          var idSTle = charIDToTypeID( "STle" );
          var idLEzerothree = charIDToTypeID( "LE03" );
          desc20.putEnumerated( idohLE, idSTle, idLEzerothree );
          var idohEn = charIDToTypeID( "ohEn" );
          var idSTen = charIDToTypeID( "STen" );
          var idENzerozero = charIDToTypeID( "EN00" );
          desc20.putEnumerated( idohEn, idSTen, idENzerozero );
          var idolCS = charIDToTypeID( "olCS" );
          desc20.putBoolean( idolCS, false );
          var idolEC = charIDToTypeID( "olEC" );
          var idSTst = charIDToTypeID( "STst" );
          var idSTzerozero = charIDToTypeID( "ST00" );
          desc20.putEnumerated( idolEC, idSTst, idSTzerozero );
          var idolWH = charIDToTypeID( "olWH" );
          var idSTwh = charIDToTypeID( "STwh" );
          var idWHzeroone = charIDToTypeID( "WH01" );
          desc20.putEnumerated( idolWH, idSTwh, idWHzeroone );
          var idolSV = charIDToTypeID( "olSV" );
          var idSTsp = charIDToTypeID( "STsp" );
          var idSPzerofour = charIDToTypeID( "SP04" );
          desc20.putEnumerated( idolSV, idSTsp, idSPzerofour );
          var idolSH = charIDToTypeID( "olSH" );
          var idSTsp = charIDToTypeID( "STsp" );
          var idSPzerofour = charIDToTypeID( "SP04" );
          desc20.putEnumerated( idolSH, idSTsp, idSPzerofour );
          var idolNC = charIDToTypeID( "olNC" );
              var list4 = new ActionList();
                  var desc21 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerozero = charIDToTypeID( "NC00" );
                  desc21.putEnumerated( idncTp, idSTnc, idNCzerozero );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc21 );
                  var desc22 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNConenine = charIDToTypeID( "NC19" );
                  desc22.putEnumerated( idncTp, idSTnc, idNConenine );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc22 );
                  var desc23 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwoeight = charIDToTypeID( "NC28" );
                  desc23.putEnumerated( idncTp, idSTnc, idNCtwoeight );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc23 );
                  var desc24 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc24.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc24 );
                  var desc25 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc25.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc25 );
                  var desc26 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc26.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc26 );
          desc20.putList( idolNC, list4 );
          var idobIA = charIDToTypeID( "obIA" );
          desc20.putBoolean( idobIA, false );
          var idobIP = charIDToTypeID( "obIP" );
          desc20.putString( idobIP, """""" );
          var idobCS = charIDToTypeID( "obCS" );
          var idSTcs = charIDToTypeID( "STcs" );
          var idCSzeroone = charIDToTypeID( "CS01" );
          desc20.putEnumerated( idobCS, idSTcs, idCSzeroone );
          var idovNC = charIDToTypeID( "ovNC" );
              var list5 = new ActionList();
                  var desc27 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzeroone = charIDToTypeID( "NC01" );
                  desc27.putEnumerated( idncTp, idSTnc, idNCzeroone );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc27 );
                  var desc28 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwozero = charIDToTypeID( "NC20" );
                  desc28.putEnumerated( idncTp, idSTnc, idNCtwozero );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc28 );
                  var desc29 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerotwo = charIDToTypeID( "NC02" );
                  desc29.putEnumerated( idncTp, idSTnc, idNCzerotwo );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc29 );
                  var desc30 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNConenine = charIDToTypeID( "NC19" );
                  desc30.putEnumerated( idncTp, idSTnc, idNConenine );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc30 );
                  var desc31 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerosix = charIDToTypeID( "NC06" );
                  desc31.putEnumerated( idncTp, idSTnc, idNCzerosix );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc31 );
                  var desc32 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc32.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc32 );
                  var desc33 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc33.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc33 );
                  var desc34 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc34.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc34 );
                  var desc35 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwotwo = charIDToTypeID( "NC22" );
                  desc35.putEnumerated( idncTp, idSTnc, idNCtwotwo );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc35 );
          desc20.putList( idovNC, list5 );
          var idovCM = charIDToTypeID( "ovCM" );
          desc20.putBoolean( idovCM, false );
          var idovCW = charIDToTypeID( "ovCW" );
          desc20.putBoolean( idovCW, true );
          var idovCU = charIDToTypeID( "ovCU" );
          desc20.putBoolean( idovCU, true );
          var idovSF = charIDToTypeID( "ovSF" );
          desc20.putBoolean( idovSF, true );
          var idovCB = charIDToTypeID( "ovCB" );
          desc20.putBoolean( idovCB, true );
          var idovSN = charIDToTypeID( "ovSN" );
          desc20.putString( idovSN, """c:\photos""" );//Here's where the default folder is suppose to go.
      var idSaveForWeb = stringIDToTypeID( "SaveForWeb" );
      desc19.putObject( idUsng, idSaveForWeb, desc20 );
  executeAction( idExpr, desc19, DialogModes.ALL );
  

• Change of strategy by default multichannel in ESXi 5.0 has no effect to the existing LUN

  Hello.

  HISTORY:

  We have several hosts with ESXi 5.0 connected (via zFCP) to SAN (a Clariion CX3 and CX4 a) 2.

  After installing ESXi (a few months ago), we've changed the strategy of multiple paths by DEFAULT to RoundRobin for both CLARiiON systems, but NOW we wan to return the default policy for the CX3 on MRU leaving the default policy for the CX4 as RoundRobin.

  * Cause CX3 is not compatible with ALUA but CX4 is, we simply changed to MRU the DEFAULT policy for the Type of array VMW_SATP_CX storage only.

  We executed the following command:

  esxcli storage set - default-psp VMW_PSP_RR - ATAS VMW_SATP_CX ATAS nmp

  After that, we restarted the ESXi to "activate" the changes.

  THE PROBLEM:

  After the reboot, surprisingly existing LUNS of the CX3 continue to use the RoundRobin policy, even if the Type of storage array appears in the form VMW_SATP_CX and the command 'esxcli storage nmp ATAS list' shows that VMW_SATP_CX now use MRU as the default policy.

  I manually changed the policy for some LUNS of RoundRobin on MRU and then restarted the ESXi and change persists for those LUNS (using MRU rather RoundRobin) but the rest of the LUNS continue to use RoundRobin.

  Also, I created a * NEW * LUN in the CX3 and the ESXi it displays correctly (using MRU rather RoundRobin).

  THE QUESTION:

  So... to change the DEFAULT policy with esxcli is useless for the existing LUN and I have to manually change EACH CX3 LUN to SRM strategy to complete the process?

  .. .or maybe I forgot any action a step further?

  Kind regards.

  THE QUESTION:

  So... to change the DEFAULT policy with esxcli is useless for the existing LUN and I have to manually change EACH CX3 LUN to SRM strategy to complete the process?

  .. .or maybe I forgot any action a step further?

  It's true... Change the default PSP will affect any new LUNS added.  Your existing LUN needs to be changed

• When I updated to 11.7 Reader on Mavericks I did by default. How do I change back to the default preview. When I updated to 11.7 Reader on Mavericks I did by default. How do I change back to the default preview.

  When I updated to 11.7 Reader on Mavericks I did by default. How do I change back to the default preview?

  Hi lonsec,.

  Please follow the steps mentioned in the link: http://digitalwriting101.net/content/how-to-make-preview-the-default-pdf-reader-on-a-mac/

  Kind regards

  Rave

• How to change the font by default in Illustrator CS6?

  How to change the font by default in Illustrator CS6?

  All first that for 10.7 and above

  http://hints.Macworld.com/article.php?story=20110704093233123

  Then go to ~/Library/Application Support/Adobe/Adobe Illustrator CS6/fr_FR/New Document profiles and open the files that you use it more. For each profile that you want to change, open the window > Type > character Styles and double click on the [Normal Character Style]. Change here to the desired police, size, etc. Close and save the document.

  

  Do this to every profile you want to edit. There is also another copy of these files in the package of application that are used to replace the in the user profile in the cases where preferences are replaced.

• My computer continues to change after closing browser default search engine.

  After I downloaded the programs winrar, bittorrent and a playstation Emulator 2 my browser continues to change the default to yahoo search engine. I change it back every time, but when I close the browser completely change just return. I have reset firefox as a last resort, but STILL the change back to yahoo. Then I went to delete cookies and still has not changed.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• How can I force change manager type by default file using GPO to all the users in my organization.

  On Windows 8 and above all how to change the file manager by default for a file type on all computers in my organization? Is there such an option available via GPO?

  I know that on Win 8 and above each user can set their default value of file managers using 'Open with' option when they right-click on a file, but I want to substitute their choice and apply by default when file type Manager they identify yourself again. How can I do this via GPO?

  Here are the excellent instructions that I have used myself before:

  How to deploy Windows 8 company type of file Associations

  In the future, you should know that the Microsoft Community forums are not the right place to ask this type of question. These forums are intended for assistance to consumers with their computer questions.

  Microsoft TechNet forums is a better place to get your computer questions.

  Let us know if this solution worked for you.

• ADF security: new password does not change if an application deploys again

  Hello
  My English is not very good
  I use jdeveloper 11.1.1.3.0
  
  I created security ADF in jazn-"Data.xml" with some users and roles.
  In application, each user can change his or her password.
  If a user changes his or her password and then I want to deploy the application again, then default password set in jazn-"Data.xml" re-created and again removed password.
  How can I save the new password that never deletes?
  
  Habib

  Properties of the application contains an option that controls whether to deploy the users/groups defined locally to the WLS in the deployment from inside JDeveloper target domain. This option is enabled by default. Clear this check box to prevent migration auto/user role:

  -> Application properties-> deployment-deployment of Security Options > uncheck "users and roles.

  Dimitar