Change IP iSCSI on the fly?

Similar Questions

• Change formsweb.cfg on the fly with the editor?

  Hi all
  
  I discovered, that it is possible to change to formsweb.cfg using your favorite editor without to start/stop OAS.
  
  After changing formsweb.cfg that I just have to point my browser to a non existing configuration, this forces OAS to read formsweb.cfg.
  Even after the restart of OAS, the changes were still present. (you may know that change formsweb.cfg and stop OAS will overwrite formsweb.cfg with the previous configuration)
  
  Someone knows this "feature"?
  Experiences?
  
  Concerning
  Michael
  
  BTW: this also works for OC4J

  I can't.

  Of course, you can, however what I have described is what happens to me (and still happened) on any version.

  If you change an existing configuration, it will not work.

  Try this: on an existing config change the connection string to a bad and start the URL of the browser. You will get an error. Now change the string to the correct connection, using an editor and attempt to restart the URL without leaving the browser. It work? (for me it does).

• Crash on the fly after Archive & amp; Install 10.3.5

  Hello
  I did an Archive & install, Boot Mac installer disk it came with, and upgrade to 10.3.9 but after the relocation of FreeHand MXa, 11.0.2 want to run more.
  If I try to launch it crash after 2 seconds.
  
  I try to remove it with the istaller (using remove THEM) and then reistall it once again, but nothing changes. Crash on the fly after only a few seconds.
  
  I use befoure repair permission disco and after installation.
  
  Many thanks for any HELP.

  Hello
  I did an Archive & install, Boot Mac from the installation disk that it came with, and upgrade to 10.3.9 but the reinstallation of FreeHand MXa, 11.0.2 won't run more.
  If I try to launch it crash after 2 seconds.

  I try to remove it with the istaller (using remove THEM) and then reistall it once again, but nothing changes. Crash on the fly after only a few seconds.

  I use befoure repair permission disco and after installation.

  Many thanks for any HELP.

• In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

  In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

  https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If you mean the - and + Zoom control so it is always there in Firefox 6.0

  or
  View-> Zoom

  Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.

• Header does not get changed when on the fly optione activated.

  I tired to change the header of the report using a reminder & it was working fine when I generate the report by keeping the option "on the fly report' disabled. When I try to execute the same sequence with "on the fly report option" on I do not see header information that I could see when "on the fly" option is disabled. I did find the cause and found the following link http://digital.ni.com/public.nsf/allkb/05F43468942BE32E86256D980074E200 but it did not work very well. I was not able to understand the reason of not revealing the header information when "on the fly" option is enabled.

  kpraveen,

  I looked at the files attached to this knowledge base and saw that they were modified versions of files delivered with TestStand 3.0.  Because we have made some changes to these files from this version, there is no guarantee that they will work with the latest version of TestStand.

  If you need this behavior in a newer version, you can change yourself the sequence reportgen_ files.  You will need create sequences modifyheader and modifyfooter in the sequence thost files, then call these the result of OTF process sequence sequences.  We are currently working on a set of more detailed guidelines, and I'll post here when they are available.

• 4462 PCI gain is editable on the fly in VB 2005 express?

  Hello

  My current setup of chanil comes from shape:
  myTask.AIChannels.CreateVoltageChannel (physicalChannelComboBox.Text, "", _)
  AITerminalConfiguration.Differential, Convert.ToDouble (minimumValueNumeric.Value) _
  Convert.ToDouble (maximumValueNumeric.Value), AIVoltageUnits.Volts)

  Where 'physicalChannelComboBox.Text' = ' Dev1 / AI0:3.

  This creats all channels at the same time, but I need to have different voltages, Min and Max.

  This is a MAX 4462 configuration.

  I'm doing this configuration in VB

  MajorVersion, MinorVersion DAQmx]

          8       6       [DAQmxChannel]          AI.Coupling     AI.Max  AI.MeasType     AI.Min  AI.TermCfg      I.Voltage.Units ChanType        PhysicalChanName        PPI2/PrimaryVolts       DC              42      Voltage -42             Differential    Volts            Analog         Input   Dev1/ai0        PPI2/PrimaryCurrent     DC              0.316   Voltage -0.316          Differential    Volts            Analog         Input   Dev1/ai1        PPI2/SecondaryVolts     DC              31.6    Voltage -31.6           Differential    Volts            Analog         Input   Dev1/ai2        PPI2/SecondaryCurrent   DC              0.316   Voltage -0.316          Differential    Volts            Analog         Input   Dev1/ai3        [DAQmxTask]     Channels        SampClk.ActiveEdge      SampClk.Rate    SampClk.Src                     SampQuant.SampMode      SampQuant.SampPerChan   SampTimingType                                  Rising                  195000          Continuous Samples      2000                            ""                              Sample Clock    PPI2    PPI2/PrimaryVolts, PPI2/PrimaryCurrent, PPI2/SecondaryVolts, PPI2/SecondaryCurrent[DAQmxDevice]   BusType DevSerialNum    PCI.BusNum      PCI.DevNum      ProductNum      ProductType     Dev1                    PCI             0x127B518               0x5             0x6             0x7170  PCI-4462
  

  I wish I could watch the values of data in time and change the gain/rainge of each channel while he was still recording data. How can I change the gain on the fly.

  Thank you.
  John

  Yes, it will work.
  Remember that you cannot change AI Min and Max during execution of the task.
  Well well... unless you will not see a difference when running

  Gavin Goodrich
  Software engineer
  National Instruments

• Is it possible to filter design on FPGA reconfigurable on the fly?

  Hello world

  I wonder if it is possible to design multi-channel filters on the FPGA reconfigurable on the fly? For example, it is possible to have X bandpass filters in an iteration, and Bandpass Filters Y with different specifications in the iteration following without having to recompile the FPGA code? Is there a simple way to achieve such a purpose?

  I have built such flexibility in the OTR (where each iteration has different filter settings) but hope to implement on the FPGA so.

  If someone could provide ideas as to whether or not such a conception is possible, it would be greatly appreciated.

  Thank you in advance for your help!

  Steven

  Hi Steven,

  How do you try to generate the FPGA code for this filter, you are using the IP generator?

  If so, this knowledge base article describes fixing the coefficients for multichannel to change on the fly filters.  There is also a nice example in there also.

  Also, if you use this IP generator, this help document describes the more Options box that has the ability to change the coefficients to be 'rechargeable' so that you can change these on the fly it too.

• PXI-5421 generating an arbitrary signals on the fly

  I have a card PXI-5421. I need to generate an arbitrary waveform with different frequencies. I need to have a trigger to switch between Forms of waves of different frequencies. I use the script to do this. I'm not able to update the frequency of the next wave on the fly without stopping the program. In other words, can I download signals in real time? The code is attached.

  Hey Kakrott,

  You should be able to achieve this with your PXI-5421. The example of 'switch between the waveforms FGEN"in the examples of LabVIEW makes something similar to what you're trying to do. As explained in the documentation: "this example shows how to switch between two different wave forms while generating, using updated data every time." This example uses a trigger to change what waveform is generated.

• change in value of the variable periodically

  Hi all

  I want to change the value of the variable periodically such as on the front panel, initial, final and incremental value must be defined by the user and the variable value changes automatically after every 5 seconds. and I want also the time interval should be set by the user on the front panel. How is that possible?

  Any help will be greatly appreciated

  Take a look at the attached simple project.  You can change all the values on the fly.  Change the initial value or the value of interval timer are asynchronous to the timer (the changes are made as soon as the user changes the value in the user interface).  The other values are updated only when the timer clicks.  The difference is that I have added reminders to the initial value and the interval timer value.  Given that these other values are used that when the timer clicks, they didn't need reminders.  Their values are used in the callback of the timer.

  I added a callback for the timer interval allow an operator to correct an error.  For example, if they wanted to wait for 10 seconds, but they came in 100, with the reminder, they do not need to wait 100 seconds before the timer is updated with correction.

• Injection containers QML on the fly?

  Hello, I'm quite new to the Blackberry development, so far, I can say that I love it. I'm working on an application that requires me to be able to change the QML that is inside a container on the fly. For example:

          // MAIN CONTAINER PLACEHOLDER
          Container {
              id: mainContainer
              // Any way to inject fully built qml files right here, and swap them out on the fly?
          }
  

  I have a menu on the left in the form of a ListView when you press a button at the top left, the current view moves to the right and allows you to use the navigation. When you select a new navigation item, I want to replace what is in the "key container" with the QML file that is appropriate for what the user has selected.

  Thanks in advance for any help!

  You're better off using a delegate control for your particular problem.

  Take a look at the example of Cookbook qml stunts to see how it is easy to do.

  http://developer.BlackBerry.com/Cascades/sampleapps/

• Changes of audio in the last update CC?

  Hi guys,.

  Can someone help me to explain what happened with the audio channels in the new update?  Stereo channels existed only on one channel (for example. A1, with Left and Right on the same channel).  Stereo audio is now represented by two channels with the left on channel 1 and just on channel 2 (similar to the old PCF).

  I am confused why this has changed, and what it means.  I struck out an advertisement recently and when I sent it to the stations, there no QC as the audio was above a level course broadcast.  I double checked with the audio company, and they certainly provided the sound correctly.  I even sent the .wav file to check at the station and broadcast safe levels (R128 mix,-23LUFS).

  So everything I can assume it's that when I dragged and dropped the audio mixer in my sequence in first and exported to my master... First has somehow messed with levels.  Originally if I dragged a stereo audio file in the first, he sat alone on channel A1 and it is always passed QC.  Now when I drag the stereo audio file in the first, he sits on channel A1 and A2, and is what makes the first play with the original levels.  The currently 2 audio channels stereo is also annoying when you do levels on the fly with keyboard shortcuts.

  Anyone had similar problems?

  Stereo tracks have not changed in PP.  Check your assignments of channels for the media.  (Right click > edit > Audio...)

• Creating new fields on the fly

  Hey all - try to set up the button, or whatever, to allow the user to add and remove the TextInputs on the fly. But I just can't 'thinking' how to do it. I think a change in the variable name for each new field, or some sort of table or object but just cannot nail down.
  Any help?
  
  Thank you
  M

  Nice - Nice. That's exactly what I need levancho.
  That's what I came with. I am a newbie to Flex/AS, so let me know if there is a better way to do it.
  Thanks for everyone for entry!

• 11.1.1.2 Oracle: Oracle Business Rules: rules update on the fly

  Hello
  
  I understand that in the latest version of Soa (11.1.1.2), rules, already built on Jdeveloper can be changed from the em console.
  
  I installed everything, but could not find my path to such a facility. Please provide advice.
  
  Kind regards
  Anand.

  Hi Anand,
  This service is provided by SOA composer not by EM.

  Try to access http://host:soa_server_port/soa/composer.

  You will be able to set/change the rules on the fly using this composer of SOA

• Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

  Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

  Unless you are in the USA, expect it to be available in Jamaica. People can not download content from iTunes Store from another country; This is why it is not an option for you.

  (143448)

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.