Change Parameters.ReportOptions by the expression

Similar Questions

• Is there a way to change the values of the expression by the keyframe?

  I use an expression of rebound/go-around on the position of an element of animation property.  On the major movements, I want the value of higher rebound-, but on smaller movements I want not so dramatic.  It seems that the expression is independent of the keyframe - and if change a variable in the expression it changes it for the entire timeline - vs just some keyframes.  Is this possible?

  You can also use ExpressionTimeline to combine multiple instances of your expression with different parameters. #

  Here's a tutorial on the use of ExpressionTimeline:

  

  Limiting Expressions of a range of keyframes with Expression timeline | mamoworld

• Cannot change the expression - read-only

  I have a problem as some of the steps in my sequence of the expression has become read-only. This has happened on and off the power for awhile on several machines, the job is to create a new step copy the expression and remove the old stage. I did once see a message something is set to 'read only', but I couldn't find where to disable it.

  I can always change to another part of the stage, in the properties-> Expressions pre and status windows are white and I can change them, the expression post window is gray and cannot be changed. The expression tab is the same, gray and read-only.

  TestStand 2012, that step is now a function f (x), don't know if it's always the case.

  I searched here and find only very old posts that sugest that the problem is solved in 2012.

  TS is considered to be a well hidden. You can view the properties hidden in the Preferences of the Station Options tab.

  Looks like your sequence files are INI format, then you might be able to fix it in a text editor. Open the movie file in a text editor and locate the steps in question. They are listed in order of their index position (e.g. "[SF. SEQ [0]. Hand [2]. TS]"), or you can use their stage names or IDs to find. In the steps that you want to modify, delete the line ' % FLG: PostExpr = 1 "to reset the indicators of the property to 0.

  You can try to generate checksums before and after copying the file in sequence to check if the file is actually change. You can also try saving the file in the sequence in binary format or XML instead of INI.

• Change the precision of the express vi table

  Hello friends.

  I have a problem.

  I use an Express VI to create a Table.

  If you see an example below, he has a table with precision set to 2.

  Now if I want to change the precision, I must right click, go to properties and make the change in accuracy.

  Is there a way to change the accuracy by programming. I couldnot see any node property for precision adjustment.

  Can someone help me?

  PS: I'm not very familiar with Labview, so I would stick to screw Express. I know that they are not preferred by the senior programmers, but they are somehow very easy and convenient to use for newbies like me.

  Rgds,

  Rohit Chawla.

  Not possible in Express VI itself, but you can add your own code between the Express VI and the resulting table. See that attached to modified VI to get the idea.

  See you soon,.

  Cerati

• Spell check in outlook express has changed from English to the french.

  spell check in outlook express changed from English to the french, and there is no option to return to English as when you mention the french options is available in the menu dropdown. Any suggestions?

  Hello

  I suggest you to visit these links and check if it helps:

  http://support.Microsoft.com/kb/932974

  http://blogs.msdn.com/b/dgoldman/archive/2007/01/03/how-to-fix-the-Outlook-Express-spelling-checker-when-the-French-dictionary-is-the-only-dictionary.aspx

  It will be useful.

• For the Express video presenter, how do you change the font of the lower third text?

  How to change the police lower third text in Adobe Presenter Video Express.  The combination of fonts and sizes is not very attractive.

  Currently, it is not possible to change video presenter Express UI. However there is an option to change them by using the cplc.ini file.

  In the video of the presenter express installation folder, you can find cplc.ini.

  Open the file in any text editor (such as notepad).

  Search for LOWER_THIRD_TITLE_FONT_NAME and LOWER_THIRD_SUB_TITLE_FONT_NAME. you will find the following lines.

  LOWER_THIRD_TITLE_FONT_NAME = clean Adobe

  LOWER_THIRD_SUB_TITLE_FONT_NAME = clean Adobe

  You can change them as below. (for purposes of example, I change the Arial font)

  LOWER_THIRD_TITLE_FONT_NAME = Arial

  LOWER_THIRD_SUB_TITLE_FONT_NAME = Arial

  This will make the police of lower third text in all your projects, Arial.

  Similarly, to change the FontSize are looking for LOWER_THIRD_TITLE_HD_FONT_SIZE / LOWER_THIRD_SUB_TITLE_HD_FONT_SIZE and change them accordingly.

  Thank you

  Manasa.

• Have changed my router but Airport Express no longer works.  How can I connect it?

  Have changed my router but Airport Express linking is no longer.  How can I connect it to the new router?

  The Express has been programmed to keep in memory the settings needed to connect to your 'old' router... What is more there... so the Express is lost and knows not how to find his way.

  The solution is to reset the AirPort Express Terminal at its new, out of box factory settings, so it can be mounted again do not forget to connect to your new router.

  To do this...

  Turning off the AirPort Express for a minute or two

  Hold the reset button the first Express... and keep holding it while you simultaneously reconnecting the power cord the AirPort Express

  After that the amber light was clignoter blink quickly for 5 to 6 seconds, release the reset button

  Allow a minute for the Express start slow, flashing amber light status

  Now, the Express is back in its new factory settings, then you a game it upwards again to connect to your new router... just like you put in place to connect with your old router.

• evaluate the expression error

  Hello

  TestStand 4.1, I'm trying to copy a container of FileGlobals to StationGlobals, based on a name.

  The following works, even if the browser of Expression says that it will cause a runtime error because "error in the call for expression int 'Evaluate'. Unexpected token:... »

  Locals.Name = "Name1"

  StationGlobals.TargetContainer = evaluate ("FileGlobals" + Locals.Name + ".") SourceContainer")

  where StationGlobals.TargetContainer and FileGlobals.Name1.SourceContainer are of the same named type.

  I tried to use EvaluateEx(), but found no construction to make it work. What would be the syntactically correct way to do this?

  Thank you

  Peter

  Peter,

  the reason for the 'mistake' the evaluation of the expression at development time, it's that he is a "stacked" expression

  First, you set Locals.Name a new value. I think in your sequence Locals.Name is by default an empty string. Then use this value in another part of the expression.

  Since there is no SequenceContext (no performance), the value of Locals.Name is not actually modified by the first part of the expression leaving the Evaluate() to search for a "FileGlobals" property... SourceContainer. Since two '.' one after another are illegal for search strings, the entire expression evaluation fails.

  This error does not occur during execution, because the first part of the expression does not actually change Locals.Name (for the SequenceContext) to be "Name1", while the second part will result in Evaluate ("FileGlobals.Name1.SourceContainer").

  hope this helps,

  Norbert

• Recording time elapsed for a change in status of the Boolean button

  Hello

  I'm new to Labview and tries to implement a simple program. I want to find the elapsed time in seconds when a key value is faithful to a false button has changed. I created the following VI attached for the same but the timer works only up to 50 seconds and then returns to 0. I don't know why, but I didn't click any autoreset in this express VI.

  Can someone help me?

  N

  Maverick269 wrote:

  ... but the timer works only up to 50 seconds and then returns to 0. I don't know why, but I didn't click any autoreset in this express VI.

  If you double-click the express VI, you will notice that it is configured to 50seconds. Set it to a very large number, such as + inf

  (I do not understand why you need a property value node? All wire to the terminal of control directly.)

• I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  Hi facions.

  What browser do you use?

  If you use Internet Explorer, you can optimize Internet Explorer and check if the problem persists. For more information, follow this link: How to optimize Internet Explorer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to change my spellchecker in Outlook Express 6 of French in English

  I want to change my spellchecker in Outlook Express 6 of French in English

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974
   
  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.
   
  Vampirefo spell check.
   
  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952
   
  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html
   
  You wanted TinySpell or. (Check spelling while typing).
   
  Download it here:
  http://www.tinyspell.M6.NET/ 
   
  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/ 
   
  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• We recently had Comcast to att uverse & changed our settings in outlook express but now receive duplicate emails

  Outlook express duplicate messages

  We recently had Comcast to att uverse & changed our settings in outlook express but now receive duplicate e-mail messages.  I have leave copy on the server checked so that we can access our messages from multiple computers, do not know if there is anything else that needs to be changed to avoid this problem.

  Pretty much confirms that it is outside interference. You have McAfee on both machines? Close all programs and temporarily disable McAfee on both machines. Send a short test message now.

  Norton and McAfee are two of the worst programs to use with Windows e-mail clients. They cause conflicts and must be removed in favour of a less intrusive program like NOD32, (not free), Avast or Microsoft Security Essentials, (both free). I use MSE on all my machines and it works fine.

• Problems with the Express upgrade and an upgrade key

  Before I've had my laptop, I have purcahsed a Windows 7 Ultimate upgrade disks and Windows 7 Professional. I used the ultimate update on my desk and I try to use the Professional on my laptop (which came with home premium).

  The problem is that I now have a "non-genuine" copy of Windows 7 because every time the upgrade does not accept my upgrade key. I understand that they are updated slightly different, but anyway that I actually purchased is more expensive than the anytime upgrade. How to make this work?

  Laptop has Windows 7 Home Premium. I used the Express upgrade to upgrade Windows Professional. Now activate Windows asks me to activate Win7 professional and will not accept the key that came with my Windows 7 Professional upgrade disks. The Activation Assistant says that I don't have the OS to use this key. The online troubleshooting guide says that such an error would occur if I am trying to use the upgraded edition to do a clean install (for example).

  I don't understand, how were you able to upgrade to Windows 7 Professional in the first place through Windows Anytime Upgrade? You have been invited to enter your key first. Windows 7 Home Premium license that you upgraded was activated before the upgrade to Windows 7 Professional through Windows Anytime Upgrade?

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link to change your product key

  Enter your product key and use the phone Activation to activate your license. Be sure to explain your situation to the Appeals Officer.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Change of domain in the CTS Manager invalidate the license?

  I need to change the field used in the existing CTS-Manager, but I'm afraid that if I do so, the license will be becomes invalid and CTS - Man will be unusable until I can get a new permit. Will be invalid license if I changed the domain?  I know that I need to import the LDAP server certificates and exchange news, but I want to assure you that I do not lose the license. I couldn't find the answer in the documentation. Help, please.

  Thank you

  Tony

  Tony:

  CTM is installed on a physical server or VM Ware?

  On your question - change the domain name on the CTS Manager will change the MAC license, which would be non - I just tried to change only the domain name on my MC in the laboratory, and after it restarted, the MAC license remained unchanged.

  If you change the DNS servers, however, the MAC license will change - seen elsewhere on the field and in my lab.

  As a general rule:

  On a CTM installed on a physical server license MAC will not change if you change the name of domain/DNS.  It must always be the same.

  On CTM as VM, MAC license will only change if you change some settings.  The MAC license is generated according to certain parameters, so if you change those, MAC license will change accordingly.

  I still need to find a specific list to the Community trade mark as to what will change the license MAC, but it should be similar to the list of items found on the side CUCM:

  http://www.Cisco.com/en/us/partner/docs/voice_ip_comm/CUCM/rel_notes/8_0_1/Delta/VMware.html#wp1054450

  HTH-

  Tina

• Cannot use analytical functions such as lag/lead in odi components 12 c except in the expression

  Hi I am a beginner of ODI 12 c

  I'm trying to get the last two comments made on the product for a given product id. and load them into a target.

  I have a source table something like

  Product SR_NO comments LAST_UPDATED_TS

  1 good car 2015/05/15 08:30:25

  1 car average 2015/05/15 10:30:25

  Jeep 2 super 2015/05/15 11:30:25

  1 car bad 2015/05/15 11:30:25

  Jeep 2 horrible 2015/05/15 09:30:25

  Jeep 2 excellent 2015/05/15 12:30:25

  
  

  I want a target table based on their last timestamp updated as (last two comments)

  
  

  SR_NO Comment1 Comment2

  1                             bad                      average
  

  2 super excellent

  I used the logic below to get records in SQL Developer but in ODI 12 c, I'm not able to do this by mapping a source to the target table by applying analytical functions to the columns in the target table. Can someone help me solve this problem

  SELECT * FROM)

  SELECT SR_NO Comment1, LAG(Comment1,1,) ON Comment2 (SR_NO ORDER BY LAST_UPDATED_TS ASC PARTITION),

  ROW_NUMBER() ON RN (SCORE FROM SR_NO ORDER BY LAST_UPDATED_TS DESC)

  FROM Source_table

  ) M

  WHERE RN = 1

  ;

  UM, I'm afraid that ODI puts the filter too early in the request, if it generates:

  SELECT * FROM)

  SELECT SR_NO Comment1, LAG(Comment1,1,) ON Comment2 (SR_NO ORDER BY LAST_UPDATED_TS ASC PARTITION),

  ROW_NUMBER() ON RN (SCORE FROM SR_NO ORDER BY LAST_UPDATED_TS DESC)

  FROM Source_table

  WHERE RN = 1

  ) M

  ;

  Instead of:

  SELECT * FROM)

  SELECT SR_NO Comment1, LAG(Comment1,1,) ON Comment2 (SR_NO ORDER BY LAST_UPDATED_TS ASC PARTITION),

  ROW_NUMBER() ON RN (SCORE FROM SR_NO ORDER BY LAST_UPDATED_TS DESC)

  FROM Source_table

  ) M

  WHERE RN = 1

  ;

  Even by changing the 'run on Hint"of your component of the expression to get there on the source, the request will stay the same.

  I think the easiest solution for you is to put everything before the filter in a reusable mapping with a signature of output. Then drag this reusable in your mapping as the new source and check the box "subselect enabled."

  Your final mapping should look like this:

  

  It will be useful.

  Kind regards

  JeromeFr