Change password protected tab

Similar Questions

• Excel password protect each Page/tab/sheet

  Is it possible to password protect each page/tab on in an excel file? I have many representatives of sales that day private offers data via this file reports and fear that others might pass this info here if they every left organization.

  Thank you

  You can use the button to 'protect the worksheet' Review tab to protect each sheet changes, but someone capable of opening the file could post pages.

  You should consider alternatives such as:

  1. Office 365, SharePoint, a personalized list of configuration and restrict who can reach the content based on their assigned areas or this sales
  2. A file Excel separate for each person with different passwords on each, all stored in the same folder, so you can easily combine them back into a single file if necessary.

• Can I change the text on the screen "This Document is password protected" for documents Document Cloud on signature?

  Is it possible to edit the text on the screen "This Document is password protected" documents sent for signature. I would like to change the language to my audience. Nothing fancy, just some text changes.

  Hi kenster9999,

  I have a sorry, but this is not possible. The way it is designed.

  Kind regards
  Nicos

• How to convert a PDF file that is password protected to a MS Word file so that I can change it?

  How to convert a PDF file that is password protected to a MS Word file so that I can change it?

  Hi smart integration

  There is no way to convert a file protected password unless you know the password.

  Contact the sender to know the password of the file.

• Metadata, can we add name of person taken photo and metadata are password protected so it cannot be changed?

  I wish I could do 2 things with metadata. First of all, I want to add a field for the photographer. Secondly, power to password protect metadata so that someone else could not touch anything. May these things is how using Lightroom 6.1.1? Thank you!

  DaleM, salvation

  Please check the basics of metadata and actions in Lightroom.

  Reference: Adobe Photoshop Lightroom Help | Metadata basics and actions

  It will be useful.

  Kind regards

  ~ Mohit

• How to password protect my files shared on my network?

  I am trying to share a folder on the network and the have password protected. I use Windows XP Service Pack 3 Professional. I have disabled in simple file sharing files Options. All my computers are in the same workgroup. For the record I would like to share, I have the following settings:

  On the sharing tab, I 'Share this folder', filled in the maximum limit and the share user name. The "Permissions" button, I deleted "Everyone" and put in a username I've created specifically for the sharing folder connection and he gave total control. Everything is left to him by default.

  For the Security tab, I just like default except added the user account, I created and that you have authorized for total control.

  When I look at from any computer on the network, I can see the computer and shared folders in the working group. There is a default folder "SharedDocs" I open it. But if I try to enter the folder that I created, I get the following error:

  "You are not allowed to access \\MYCOMP\SharedFolder. Contact your network administrator to request access.

  If I do all what I said above, but instead of adding the user account, I put "Guest" or "everyone, then the file can be found on my other computers without the error but no password is invited. What should I do so that when I try to enter the folder, it ask for a login and a password.

  As a side note, my other computers do not have this problem with their shared folders. When I click on the computer under 'View workgroup computers '. Rather than open a list of shared folders, it opens a prompt for a login and a password, and if they are correct, it will show that all shared folders and files shared to that user. If the password of the specific folders is not possible, should what settings I change so that it works like this instead?

  My apologies if this should have been in the files, records and research topic.

  When you connect to a network share, authentication proceeds roughly in this order:

  1. If the user on the remote computer is connected with a user name that exists on the machine sharing the passwords match, while the user is authenticated as himself without another guest.
  2. If the user on the remote computer is connected with a user name that exists on the machine of sharing and the passwords do not match, then this as seen user denied access to the computer sharing without prompting.
  3. If the user on the remote computer is connected with a user name does not exist on the machine of sharing, an attempt is made to authenticate the user "guest".  If successful, that the user connection looks like it is 'guest' on the machine of sharing user.
  4. If the remote user is unable to authenticate as a 'guest' on the sharing machine, then a name of user and password screen appears to provide authentication.

  It seems to me to make it work as you want, you want to make sure that step 3 above does not occur.  This can be accomplished by disabling the "Guest" on the machine sharing account. (This forces everyone to authenticate on the machine)  Two ways to do as an administrator on the machine of sharing:
  (A) bring up a command prompt window (start-> Run-> "cmd") and enter the command:
  NET user guest / active: No.
  (B) right click on 'My Computer'-> manage-> system tools-> local users and groups-> users
  Double-click "Invited" in the right window-> Put a check in the box "account is disabled".  "OK" your way out.

  HTH,
  JW

• DeskJet 2540: Lockout of printing wireless password protect - how to reset?

  Hello

  I just bought a Deskjet 2540 and I'll it using my OS 10 devices (Macbook Pro, iPhone and iPad).

  I tried to connect using the option 'Wireless', but the device request a password that was not printing sheet which has been generated.  I think I have missed a seven and will always password protected access.

  I tried to access the built-in Web server by http: address on the sheet, but it fails to open - saying that I am not online.

  Help!

  What I need is to access the original password or power is then set up or deselct password for the use of the wireless option.

  Any suggestions

  Onalayah

  Professor!

  and anyone who can run in this situation...

  If you run Yosemite 10 and you find yourself unable to access directly on wireless Deskjet 2540 because you do not have the password

  AND

  You can not access the EWS page by the directions on the map generated when you hold down the button wireless live 3 seconds...

  Try this

  Make sure that the direct wireless (on the printer) option is turned on

  Go to your control panel (icon usually appears on your dock, it looks like a gear)

  Clikc on double

  Double-click Printers & Scanners

  Select the 2450 Deskjet icon that has the green light next to it. (if you have more than one icon - go in your wifi settings and select HP-PRINT--Deskjet 2540 series)

  OR

  Click on the printer that the printer has been selected.

  Click settings

  Click on see the printers Web page - this will take you to the EWS

  Your browser opens a page that will display the SAP - there is a saying, that you will be redirected to a secure page and your browser may display a message on the connection, or the security certificate is invalid. If, in order to follow the instuctions to accept the certificate. Click OK (and double check DON'T SHOW THIS OPTION if you want to)

  The EWS page opens in the NETWORK of the top menu tab

  Select Wirless live in the left menu (it will take a few seconds to process)

  You should now see the situation of Direct Wirless, Pasword and HP wirless live direct name

  To change any of these settings click on "change settings" at the botom of the page.

  After you save the new setting go to your wi - Fi (via the icon in the main menu bar (at the top of the page right quaderant of your screen or through 'Network' in your control panel))

  Choose the HP Print... network, and then type your password (if you selected this option)

  IMPORTANT NOTE:

  If you use direct wireless you may not be connected to the internet at the same time - this was my case.

  Hope that helps and bye for now.

• Files & folder sharing between XP, Vista, Seven with password protected

  How to share files or folder between XP, Vista & seven... must password protected
  My vista and my friend seven sharing very well, is password protected and I would like to add another XP at the center network and sharing as well, but I find the xp you have a problem, it can make sharing with vista & seven only without password protected and I would like to know how can I do with password protected sharing.
  Below are done on xp:
  1. install the update kb922120
  2.secpol.msc-> authentication security LAN network manager set to send LM & NTLMv2 - use NTLMv2 session security if negotiated.
  Using Xp to Vista to access, seven a shared folder, no problem, while the password protected is located next
  Using XP to Vista, the folder shared seven, the access you have problem while the password is defined on
  It show no permission, but suppose that displays the prompt for credentials...

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• How to read that a password protected PDF on my Kindle. I have the password and I am allowed to read. This is the manual school related.

  I want to read PDF on my Kindle. Read books of text on a computer, it's not what I want to do every time.

  Hi robertc75438092,

  How to access a PDF protected on a Kindle

  The major advantage for PDF files, is that you can distribute documents to a wide variety of platforms, including the Amazon Kindle. While the Kindle opens most PDF files without any difficulty, you can run in trouble if the PDF file has password protection applied. The Kindle will open PDFs protected by password, but not if the PDF file has digital rights management applied. Most of the models of Kindle cannot open DRM encrypted PDF files, but you can download an app, qPDF, to Kindle fire which allows you to open PDFs encoded with DRM.

  No - DRM Protection password: -.

  Step1 highlight the PDF file.

  Step 2 press the 5-way control to open the PDF file. If your Kindle is a touch screen, tap the PDF file to open it. This will open a dialog box that asks you the password.

  Step 3 type the password.

  Step 4 Select the 'OK' button and press the control button 5. Press the 'OK' button on the touchscreen models.

  Coded DRM of PDFs on the Kindle Fire: -.

  Step 1: click the "Apps" tab from the home page to open the applications menu.

  Step 2, click on the "Store" link in the upper right corner of the page to access the Kindle app store.

  Step 3 Type qPDF Viewer in the field "search".

  Step 4 press the "Free" button next to the qPDF online Viewer. The 'Free' button will change to "install".

  Step 5 press the button "install". The application will download and install to your Kindle Fire. When you are finished, you will see a button 'open '.

  Step 6 press the 'Open' button to launch the application.

  Step 7 tap the

  Step 8 press the "open" button to select a PDF file to open it.

  Step 9 tap on the PDF you want to open. You will see a dialog box asking you to enter a password.

  Step 10, type the password.

  Step 11 press the 'OK' button to open your PDF file.

  I will recommend you to consult the Kindle support team, they will help you with the details.

  Kind regards
  Nicos

• Secure space - password protect

  Hello world.

  This is my first thread, so please be gentle on me

  I am looking for assistance in what follows - I'm designing a website for a client, and he asked me an area safe for its own customers to connect safely and see their documents (only to see, not to change what anyone).

  I have no knowledge about programming, I was really hoping you could help me on how to do it. I downloaded a widget to password protect, but there are two problems with that:

  1. When you enter the password, it is not a secret, which means, if the password is Hello, when I type in the password box, you can see exactly what I'm typing. Not secret at all, and I do not know he doesn't like it.

  2 - the password is the name of the page, because what I do when you enter the password is indicative of muse to access THIS page. So, if the password is Hello, when you open the page, the name of the tab of the browser will be Hello.

  Is not acceptable, unfortunately.

  I wonder if there is another way to do this, perhaps using Business Catalyst? But I have never used before and really don't understand at all.

  A loving soul might help a brother, please?

  This is the project of the site Web - www.mareassetmanagement.com - the password for the secure area is 1279 and you can see what I mean.

  Looking forward to your answers.

  Bernardo

  Hello Bernardo.

  There are several discussions on this issue,

  Login using Muse and British Colombia page

  Re: Can I create a login/password in the Muse for a HTML5 page or two?

  How to create an entry page protected password for a site of muse?

  Adding a box protected on my Muse site

  Create customer log in page within the Muse with the 3rd party, free hosting of images

  Let me know if you have any question.

• SmartView error when sending/updating: "the cell or chart you are trying to change is protected."

  Hello! Users try to present data in a form, but they get the following error message:

  < < the cell or chart you are trying to change is protected and therefore read-only. To modify a protected cell or chart, first remove protection using the command Unprotectect sheet (review, group changes tab). You may be prompted for a password. > >

  They get the same error when trying to refresh the form.

  The form is part of a list of tasks, but is not supposed to be protected. In fact, they open the form an empty workbook, excel then I don't understand what is the difference with other forms, where they do not have this message.

  Do you have an idea of what is triggering?

  Users were Smartview 11.1.2.1. The problem described above has been identified as a defect of that computer software has been noted as bug 16017903 by Oracle. To resolve this problem download and install the Patch 16238382, or alternatively Smartview unistall and install version 11.1.2.2.310.

• Need password protection

  I want to put a password on my laptop while traveling. How to lock my computer while traveling? Can you please send a link or give me very clear and simple 'HOW TO' instructions?  I use my admin code? Will I need a new password? What are the settings I will implement? Wil I change screen saver time and sleep to "never"?  I usually close my cover when I leave the room to let rest the computer - it's just at home and it's just me and her husband in the House - HOWEVER, I am concerned with coming summer travel. Thank you.

  What follows has instructions: p-other-people-from-using-it.html http://www.macworld.com/article/2910939/how-to-password-protect-your-mac-and-kee

  If you are really concerned about the protection of your data, I highly recommend turn on FileVault:

  Use FileVault to encrypt the boot on your Mac - Apple Support disk

• Unlocking a password protected computer

  My 8 yr old password protected computer my parents son and doesn't remember the password.  Is there a way to reset the password without logging in?

  Just restart the computer. continuously press f8
  The windows start menu should appear. Select "safe mode".
  On the login screen, you should see "Administrator" account
  Log in with the administrator account, go to the "Control Panel" and change the password for more details

  http://support.Microsoft.com/kb/321305#ChangePWD_WinXP

• How to password protect shared XP files.

  I noticed how you can password protect Windows 7 file sharing (with the account user name and password). What's possible with Windows XP?

  Change password: net user guest newpassword

  Remove password: net user comments * (press twice)

  May also manage user accounts in Control Panel.

  Or type control userpasswords2 in the box run from the start menu.

  John

• Comments of ball may be password protected?

  I have a document that is password protected, but I see that another user can always delete a comment in a bubble of marginal and leave no trace of this deletion. Is it possible to protect ball as text comments, if another user cannot delete or modify my comment with him showing as a change of track?

  Nope.