Change password VPN clients group

I have an ASA device that is configured for remote vpn and use a Radius Server to authenticate the credentials of the vpn users.  If I want to change the password on the VPN client under authentication group, where and how should I do?  Also, do I need to change this password on the Radius Server?

See attached screenshot.

Hello

If you only configured on the RADIUS user authentication, then password under tunnel group is what you are looking for. This password, that you configure under Authentication Server IPSec Client Group is password that is configured as a tunnel group.

Please evaluate the useful messages

Best regards

Eugene

Tags: Cisco Security

Similar Questions

  • Cisco VPN Client and Windows XP VPN Client IPSec to ASA

    I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.

    PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?

    Config is:

    !

    interface GigabitEthernet0/2.30

    Description remote access

    VLAN 30

    nameif remote access

    security-level 0

    IP 85.*. *. 1 255.255.255.0

    !

    access-list 110 scope ip allow a whole

    NAT list extended access permit tcp any host 10.254.17.10 eq ssh

    NAT list extended access permit tcp any host 10.254.17.26 eq ssh

    access-list extended ip allowed any one sheep

    access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh

    sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0

    tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0

    flow-export destination inside-Bct 192.168.1.27 9996

    IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0

    ARP timeout 14400

    global (outside-Baku) 1 interface

    global (outside-Ganja) interface 2

    NAT (inside-Bct) 0 access-list sheep-vpn

    NAT (inside-Bct) 1 access list nat

    NAT (inside-Bct) 2-nat-ganja access list

    Access-group rdp on interface outside-Ganja

    !

    Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2

    Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1

    Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1

    Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1

    Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1

    Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1

    Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1

    Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1

    Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1

    dynamic-access-policy-registration DfltAccessPolicy

    Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

    Crypto ipsec transform-set newset aes - esp esp-md5-hmac

    Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans

    Crypto ipsec transform-set vpnclienttrans transport mode

    Crypto ipsec transform-set esp-3des esp-md5-hmac raccess

    life crypto ipsec security association seconds 214748364

    Crypto ipsec kilobytes of life security-association 214748364

    raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

    vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1

    card crypto interface for remote access vpnclientmap

    crypto isakmp identity address

    ISAKMP crypto enable vpntest

    ISAKMP crypto enable outside-Baku

    ISAKMP crypto enable outside-Ganja

    crypto ISAKMP enable remote access

    ISAKMP crypto enable Interior-Bct

    crypto ISAKMP policy 30

    preshared authentication

    3des encryption

    md5 hash

    Group 2

    life 86400

    No encryption isakmp nat-traversal

    No vpn-addr-assign aaa

    Telnet timeout 5

    SSH 192.168.1.0 255.255.255.192 outside Baku

    SSH 10.254.17.26 255.255.255.255 outside Baku

    SSH 10.254.17.18 255.255.255.255 outside Baku

    SSH 10.254.17.10 255.255.255.255 outside Baku

    SSH 10.254.17.26 255.255.255.255 outside-Ganja

    SSH 10.254.17.18 255.255.255.255 outside-Ganja

    SSH 10.254.17.10 255.255.255.255 outside-Ganja

    SSH 192.168.1.0 255.255.255.192 Interior-Bct

    internal vpn group policy

    attributes of vpn group policy

    value of DNS-server 192.168.1.3

    Protocol-tunnel-VPN IPSec l2tp ipsec

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value split tunnel

    BCT.AZ value by default-field

    attributes global-tunnel-group DefaultRAGroup

    raccess address pool

    Group-RADIUS authentication server

    Group Policy - by default-vpn

    IPSec-attributes tunnel-group DefaultRAGroup

    pre-shared-key *.

    Hello

    For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.

    Please see configuration below:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

    or

    http://tinyurl.com/5t67hd

    Please see the section of tunnel-group config of the SAA.

    There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.

    So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.

    Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.

    "crypto isakmp nat-traversal.

    Thirdly, change the transformation of the value

    raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

    Let me know the result.

    Thank you

    Gilbert

  • Cisco VPN client (ASA) password expiry messages

    Hi all

    I am looking for a way to change the message displayed on the Cisco VPN client, when a password change is required. This configuration uses an ASA 5520 with Windows 2003 IAS radius for authentication server.

    I have configured the option 'password-management' under the tunnel-group, but when the password expires the vpn client prompts you to "enter a new pin code.

    This customizable message, for example "Please enter a new password to 8 characters etc.

    The original message communicates enough information for the user.

    Thank you

    Hi Matt,

    This is a known defect CSCeh13180 (when using RADIUS with expiry) and there is currently no plan to fix this bug.

    But you can try this for one of your VPN client and see if that helps.

    you need to change the VPNClient.ini on the PC that installed the VPN Client. Here are the settings you will need...

    [RadiusSDI]

    NewPinSubStr = "" enter the new password: ""

    HTH

    Kind regards

    JK

  • Password VPN group

    We have a vpn group configured on Hub vpn 3030. Is there a way to display the Group vpn in clear text password, we will not change because we do not know how many people use it?

    Thank you very much

    Retrieve the Group The Group of past used by the Cisco Internet Protocol Security (IPsec) virtual private network (VPN) client is encrypted on the hard drive, but clearly in the memory. This password can now be recovered on the platform implementations the Linux and Microsoft Windows of the Cisco's VPN IPsec client

    http://www.Cisco.com/warp/public/707/Cisco-SN-20040415-grppass.shtml

  • How to save the password to the Cisco VPN Client?

    Hello

    I use version 4.8 to connect to the VPN from my client, I would like to save my password so that I don't have to enter it each time.

    I've amended the FCP file to include:

    ! SaveUserPassword = 1

    and my password in UserPassword =, but it worked only once, after I restart it no longer works.

    Then I see the method to use the command-line vpnclient.exe to connect and provide the password as a parameter to the command:

    vpnclient connect user pwd

    But I got this error when you try to connect:

    Setting user password failed. User password is read-only.

    And the client always requests the password.

    Any ideas?

    Thank you

    The server sets the password save, you will not be able save locally unlessit is enabled on the server side. If the customer has an ASA, follows allows him under the group policy for VPN clients.

    allow password-storage

  • Customer VPN - client configuration isakmp crypto group missing

    Hello

    I have a 12.2 (7r) version running Cisco 2611XM

    I am trying to get the vpn clients to connect to the router following this link:

    http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml

    My problem is that when I try to add the group I do not get the group option.

    That's what I get:

    My_Router (config) #crypto isakmp client configuration?

    network address Set for the client address pool

    What I need to change the version of IOS, if yes what IOS should I use?

    Any help is greatly appreciated. This is the show of the current router version

    Cisco Internetwork Operating System software

    (Tm) C2600 software IOS (C2600-IK9S-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)

    Copyright (c) 1986-2003 by cisco Systems, Inc.

    Updated Friday 19 June 03 16:35 by pwade

    Image text-base: 0x8000808C database: 0x81280FF0

    ROM: System Bootstrap, Version 12.2 (7r) [next 7r], RELEASE SOFTWARE (fc1)

    My_Router uptime is 1 minute

    System to regain the power ROM

    System image file is "flash: c2600-ik9s - mz.122 - 17A .bin.

    This product contains cryptographic features and is under the United States

    States and local laws governing the import, export, transfer and

    use. Delivery of Cisco cryptographic products does not imply

    third party approval to import, export, distribute or use encryption.

    Importers, exporters, distributors and users are responsible for

    compliance with U.S. laws and local countries. By using this product you

    agree to comply with the regulations and laws in force. If you are unable

    to satisfy the United States and local laws, return the product.

    A summary of U.S. laws governing Cisco cryptographic products to:

    http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

    If you need assistance please contact us by mail at

    [email protected] / * /.

    Cisco 2611XM (MPC860P) processor (revision 0 x 100) with 60416K / 5120K bytes of memory.

    Card processor ID JAE072602F2 (1616341861)

    M860 processor: Ref. 5, mask 2

    Connection software.

    X.25 software Version 3.0.0.

    2 FastEthernet/IEEE 802.3 interfaces

    2 network interfaces Serial (sync/async)

    32 KB of non-volatile configuration memory.

    32768 K bytes of processor onboard flash system (read/write)

    Configuration register is 0 x 2102

    Thank you

    Randall

    Randall,

    TAC is more an organization of break-fix. The question that you run by being more a features/functionality with the version of the code, TAC will probably able to help.

    Your best option is to upgrade the memory and upgrade the router to 12.3 Mainline or higher.

    Let me know if it helps.

    Kind regards

    Arul

  • SSL VPN Client username and passwords save

    Hello

    We use SSL VPN with ASA, we want to save the user name and password to connect to the customers in the SSL VPN client, if user only has not to type again to connect to the enterprise resources, employees normally use iPhone IOS and Android for VPN access.

    Is their a way, we can save the credentials username and password for iphone and android?

    I googled for it and found a way using URIS to pre-fill the name of user and password but I'm not sure how it works, and it will be beneficial.

    http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

    Hello

    You can use the URIs, if your method of methods must use WBS for the password pre-population.

    I would recommed you use certificate authentication, so they don't have to use the user name and password, and the process will be done automatically.

    You can take a look at this Document that created one of my peers:

    - https://supportforums.cisco.com/blog/152941/anyconnect-certificate-based...

    He has the details you will need.

    Don t forget to rate and score as correct the helpful post!

    David Castro,

    Kind regards

  • Group to be installed on the VPN Client

    We run IOS 8.2 (2). We configure VPN groups to authenticate locally to the ASA.  We have about 10 different groups (marketing, engineering, accounting, technical support, etc.) that I need the installation which is no problem.  My problem is that I have to configure 10 different groups on the VPN client based on their user name.  Is it possible to set up a generic group such as everyone on the VPN client and the users will no longer have access to resources based on their user name when they connect to the VPN client?

    Please let me know if you have any questions or need additional information.

    Thank you.

    Laura

    Hi Laura,

    You can have all users that connect to the same group.

    Then, individually on each user, create a VPN filter...

    username test attributes

    VPN-filter...

    Federico.

  • SSL VPN from Cisco ASA and ACS 5.1 change password

    Dear Sir.

    I am tring configure ASA to change the local password on ACS 5.1. When the user access with ssl vpn if the ACS 5.1 password expiration date. ASA will display the dialog box or window popup to change the password. But it does not work. I'm tring to Setup with the functionality of password management on the SAA. When I enable password management it will not work and is unable to change the password. Could you tell me about this problem?

    Thank you

    Aphichat

    

    Dear Sir,
    

    I'm tring to setup ASA to change local password on ACS 5.1. When user access with ssl vpn if password on ACS 5.1 expire. ASA will show dialog box or pop-up to change password. But It don't work. I'm tring to setup with password management feature on ASA . When I enable password management it don't work and can't to change password. Could you advise me about this problem?
    

    Thank you
    

    Aphichat

    Hi Aphichat,

    Go to the password link below change promt via AEC in ASA: -.

    https://supportforums.Cisco.com/docs/doc-1328;JSESSIONID=A51E68318579261787BD60DDA0707819. Node0

    Hope to help!

    Ganesh.H

    Don't forget to note the useful message

  • How to match tunnel-group with auth ASA 8.2 and IPSec VPN Client using digital certificates with Microsoft CA

    Hello

    I set up a lab for RA VPN with a version of the ASA5510 8.2 and VPN Client 5 software using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco's Web site:

    http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080930f21.shtml

    Now, the vpn works fine, but now I need to configure a tunnel-different groups so I can provide different services to different users. The problem I have now is that I don't know how to set it up for the certificate is the name of tunnel-group. If I do an ASA debug crypto isakmp I get this error message:

    % ASA-713906 7: IP = 165.98.139.12, trying to find the group through OR...
    % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
    % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IKE ID...
    % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
    % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IP ADDR...
    % ASA-713906 7: IP = 165.98.139.12, trying to find the group using default group...
    % ASA-713906 7: IP = 165.98.139.12, connection landed on tunnel_group DefaultRAGroup

    So, basically, when using certificates I connect always VPN RA only with the group default DefaultRAGroup. Do I have to use a model of different web registration for application for a certificate instead of the user model? How can I determine the OU on the user certificate so that match tunnel-group?

    Please help me!

    Kind regards

    Fernando Aguirre

    You can use the group certificate mapping feature to map to a specific group.

    This is the configuration for your reference guide:

    http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/IKE.html#wp1053978

    And here is the command for "map of crypto ca certificate": reference

    http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2186685

    Hope that helps.

  • Error when connecting with the new announcement of account in windows 8 client as "User must change password at the next logon"

    Windows Server 2003 R2 Standard Server
    Client-side: Windows 8

    The problem:

    I create a new user and let the "user must change password at the next logon' checked. When I try to log in with the newly created user I get an error saying "User must change password at the next logon" after ptoviding the new password.

    At this point if I uncheck the "user must change password at the next logon', then the user can connect properly.

    Can someone help me. Please let me know any problem OS compatibility between the server and the OS cleint.

    Jaril

    Hi Jaril,

    Thanks for posting your query in Microsoft Community.

    According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

    TechNet Forum

    Hope this information is useful.

  • Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

    Hello

    I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

    I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

    Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

    Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
    Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

    The router configuration

    IKE policy

    VPN strategy

    Client configuration

    Hôte : < router="" ip=""> >

    Authentication group name: remote.com

    Password authentication of the Group: mysecretpassword

    Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

    Username: myusername

    Password: mypassword

    Please contact Cisco.

    Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

    You can use the PPTP on the RV180 server to connect a PPTP Client.

    In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

  • AnyConnect + possible PSK (pre-shared key) as under with cisco vpn client ikev1 and ikev2

    Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type

    Type of TG_TEST FW1 (config) # tunnel - group?

    set up the mode commands/options:
    Site IPSec IPSec-l2l group
    Remote access using IPSec-IPSec-ra (DEPRECATED) group
    remote access remote access (IPSec and WebVPN) group
    WebVPN WebVPN Group (DEPRECATED)

    FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
    FW1(config-tunnel-IPSec) #?

    configuration of the tunnel-group commands:
    any required authorization request users to allow successfully in order to
    Connect (DEPRECATED)
    Allow chain issuing of the certificate
    output attribute tunnel-group IPSec configuration
    mode
    help help for group orders of tunnel configuration
    IKEv1 configure IKEv1
    ISAKMP policy configure ISAKMP
    not to remove a pair of attribute value
    by the peer-id-validate Validate identity of the peer using the peer
    certificate
    negotiation to Enable password update in RADIUS RADIUS with expiry
    authentication (DEPRECATED)

    FW1(config-tunnel-IPSec) # ikev1?

    the tunnel-group-ipsec mode commands/options:
    pre-shared key associate a key shared in advance with the connection policy

    I'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)

    Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..

    But it would be nice to have a bit more security on VPN other than just the connections of username and password.

    If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?

    If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?

    I really hope that something like this exists still!

    THX,

    WR

    You are welcome

    In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.

    With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.

  • VPN client works not

    Hi all

    can someone help me troubleshoot vpn client with the following configuration:

    CLI (config) # ip local pool 172.16.1.100 - 172.16.1.199 mask 255.255.255.0 vpnpool
    Password marty CLI (config) #username 12345678

    Share front of CLI (config) political #isakmp 1 authentication
    CLI (config) political #isakmp 1 3des encryption
    CLI (config) political #isakmp sha 1 hash
    Policy group CLI (config) #isakmp 1 2
    #isakmp (config) CLI policy 1 life 43200
    Enable #isakmp CLI (config) outside
    CLI (config) #crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    CLI (config) #crypto dynamic-map outside_dyn_map 10 the value transform-set ESP-3DES-SHA

    CLI (config) #crypto dynamic-map Outside_dyn_map 10 the value reverse-road
    CLI (config) #crypto outside_dyn_map dynamic-map 10 set - the association of safety to life seconds 288000

    Map of #crypto CLI (config) Outside_map 10-isakmp dynamic ipsec Outside_dyn_map
    Outside_map interface card CLI (config) #crypto outside
    CLI (config) #crypto isakmp nat-traversal

    CLI (config) #-internal groupvpn group policy

    Attributes CLI (config) #-groupvpn group policy

    CLI (config) #(groupe politique-config) # Protocol - tunnel - vpn IPSec

    CLI (config) #tunnel - group groupvpn type ipsec-ra

    CLI (config) #tunnel - group groupvpn ipsec-attributes

    CLI (ipsec-tunnel-config) key #pre - shared - key

    CLI (config) #tunnel - group groupvpn General attributes

    CLI (general-tunnel-config) #authentication - server - LOCAL group

    Strategy-group-by default CLI (config - IPSec - tunnel) Solidarityvpn #.

    CLI (general-tunnel-config) #address - pool vpnpool

    then try to connect using the vpn client it ask for authentication and authentication it when negotiating course political channel, but it gives me not connected.

    can anyone help in this.

    Thanks in advance,

    Ayman

    Have you changed the card encryption as advised earlier?

    Please provide us with the following output to see the rest of the changes:

    See the isa crypto his

    Crypto ipsec to show his

  • Cisco 2621 to VPN client problem

    If I ping on the client to the network (behind the router), debug displays the client encryption and decryption of the router. The ping will not, because the router is not encrypt and so the customer is not getting anything to decrypt.

    The Setup is a bit different because the default route is within the network, as it is not the regular internet gateway. I have to add routes for pointing the customer who logs on the internet. Also, one machine uses this as a gateway (using a routemap). To troubleshoot, I removed the routemap custom without result. I think to change the default route, but I don't see how this would have on it.

    Any ideas? Am I missing something?

    Cisco 2621 12.2 (15) T running to the latest version of the client.

    username password XXX 7 XXXXXX

    AAA new-model

    !

    AAA authentication login userauthen local

    AAA authorization groupauthor LAN

    AAA - the id of the joint session

    IP subnet zero

    !

    !

    audit of IP notify Journal

    Max-events of po verification IP 100

    !

    !

    crypto ISAKMP policy 3

    BA 3des

    preshared authentication

    Group 2

    !

    Configuration group customer crypto isakmp XXXX

    key XXXXX

    pool ippool

    !

    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

    !

    Crypto-map dynamic dynmap 10

    Set transform-set RIGHT

    !

    map clientmap client to authenticate crypto list userauthen

    card crypto clientmap isakmp authorization list groupauthor

    client configuration address map clientmap crypto answer

    10 ipsec-isakmp crypto map clientmap Dynamics dynmap

    !

    !

    interface Loopback1

    192.168.254.1 IP address 255.255.255.0

    !

    interface FastEthernet0/0

    IP address 200.x.x.x 255.255.x.x

    no ip proxy-arp

    NAT outside IP

    automatic duplex

    automatic speed

    clientmap card crypto

    !

    interface FastEthernet0/1

    the IP 10.0.0.1 255.255.255.0

    no ip proxy-arp

    IP nat inside

    route CUSTOMGATE card intellectual property policy

    automatic duplex

    automatic speed

    !

    IP local pool ippool 10.172.10.100 10.172.10.200

    IP nat inside source map route sheep interface FastEthernet0/0 overload

    no ip address of the http server

    no ip http secure server

    IP classless

    IP route 0.0.0.0 0.0.0.0 10.0.0.30

    access-list 100 deny ip 10.0.0.0 0.0.0.255 10.172.10.0 0.0.0.255

    access-list 100 permit ip 10.0.0.0 0.0.0.255 any

    username password XXX 7 XXXXXX

    AAA new-model

    !

    AAA authentication login userauthen local

    AAA authorization groupauthor LAN

    AAA - the id of the joint session

    IP subnet zero

    !

    !

    audit of IP notify Journal

    Max-events of po verification IP 100

    !

    !

    crypto ISAKMP policy 3

    BA 3des

    preshared authentication

    Group 2

    !

    Configuration group customer crypto isakmp XXXX

    key XXXXX

    pool ippool

    !

    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

    !

    Crypto-map dynamic dynmap 10

    Set transform-set RIGHT

    !

    map clientmap client to authenticate crypto list userauthen

    card crypto clientmap isakmp authorization list groupauthor

    client configuration address map clientmap crypto answer

    10 ipsec-isakmp crypto map clientmap Dynamics dynmap

    !

    !

    interface Loopback1

    192.168.254.1 IP address 255.255.255.0

    !

    interface FastEthernet0/0

    IP address 200.x.x.x 255.255.x.x

    no ip proxy-arp

    NAT outside IP

    automatic duplex

    automatic speed

    clientmap card crypto

    !

    interface FastEthernet0/1

    the IP 10.0.0.1 255.255.255.0

    no ip proxy-arp

    IP nat inside

    route CUSTOMGATE card intellectual property policy

    automatic duplex

    automatic speed

    !

    IP local pool ippool 10.172.10.100 10.172.10.200

    IP nat inside source map route sheep interface FastEthernet0/0 overload

    no ip address of the http server

    no ip http secure server

    IP classless

    IP route 0.0.0.0 0.0.0.0 10.0.0.30

    IP route 20.x.x.x 255.255.255.255 200.x.x.x (it is here to let him speak to the customer)

    access-list 100 deny ip 10.0.0.0 0.0.0.255 10.172.10.0 0.0.0.255

    access-list 100 permit ip 10.0.0.0 0.0.0.255 any

    access-list 110 deny host ip 10.0.0.73 10.1.0.0 0.0.0255

    access-list 110 permit ip 10.0.0.73 host everything

    !

    CUSTOMGATE allowed 10 route map

    corresponds to the IP 110

    IP 200.x.x.x next value break

    !

    sheep allowed 10 route map

    corresponds to the IP 100

    !

    !

    CUSTOMGATE allowed 10 route map

    corresponds to the IP 110

    IP 200.x.x.x next value break

    !

    sheep allowed 10 route map

    corresponds to the IP 100

    !

    Add at least:

    > Route ip 10.172.10.0 255.255.255.0 200.x.x.x

    to force the traffic for VPN clients on the external interface. also make sure you hav a route for the clients IP address (not the VPN negotiated one) that also indicates the external interface.

    The fact that the router is not encrypt means that it is not even see the responses from the inside, hosts, which indicates that your internal network is not a road to 10.172.10.0 pointing to this router, OR the router receives responses but sends them back out inside interface which will be set by the first route, I mentioned above.

Maybe you are looking for