Change step description

Similar Questions

• How to change the Description of the c# step programmatically

  Based on user selections in my DLL I want to change the Description of step TestStand.  I use c# 2008 and TestStand 4.1.  I am able to read the Description by using Step.GetDescriptionEx, but I can't find a matching 'Set' command.

  It is a step in editing.  With the help of PropertyObjectFile.IncChangeCount () works fine.

• personalized step description

  When you create a custom step type, what do I enter in the box "Expression of Description step" to display the 'operation' and "track (s) to connect/disconnect" the programmer went into properties of switching tab of each step? This custom is only switching so I don't want to open the Properties dialog box and look at each step to see what is. Thank you, Jason

  Hello Jason,

  In the "Step Description Expression" box you could do something like:

  "Operation:"+ ".

  (
  Step.TS.SwitchEnabled?
  (
  Step.TS.SwitchOperation == 1?
  ' Connect ' + ' |. ' Track (s): "+ Step.TS.RouteGroupConnect:"
  (
  Step.TS.SwitchOperation == 2?
  ' Disconnect ' + ' |. ' Track (s): "+ Step.TS.RouteGroupDisconnect:"
  (
  Step.TS.SwitchOperation is 3?
  "Disconnect all":
  (
  Step.TS.SwitchOperation is 4?
  "Connect/disconnect" + "|" Track (s) Connect: "+ Step.TS.RouteGroupConnect +" | Disconnection of path (s): "+ Step.TS.RouteGroupDisconnect:"
  "Error".

  )
  )
  )
  )
  : 'Not active change.
  )

  It is a little confusing because SwitchOperation is a number that corresponds to an operation, that is why we have the nested conditional statements.

  Let me know if you have any questions.

• Change the Description of several photos

  I emphasize the relevant photos and change, the Description field within information (Cmd + I).

  But when I click on out of the box Info, he asks me if I want to change the description of 3 000 photos (pictures of this year, not only the photos that I have highlighted).

  No idea why it does this? Is there another method of updating the Description?

  Thank you

  How you change the descriptions is exactly how it should be done. Select the photos in the browser, open the Info Panel with ⌘I, and enter a new label.

  MacBook Pro with the retina, OS X El Capitan (10.11.5)

  Your profile signature OS X El Capitan is still valid?

  I had a similar problem when running left El Capitan.  Occasionally, Photos would change the description field of all the photos in the album, I was displayed and not only the description of the selected photos. And for the fields title, this would change a title that I had chosen.

  On the Sierra, I noticed that the browser is sometimes loses focus for the cursor. When I use the Trackpad and not by the mouse.  If the Info Panel is opened for a few selected photos, a reckless trackpad gesture can move the focus to another album in the sidebar and the Info Panel passes to this album, and then by typing in a different title or description will show the warning about editing thousands of photos.

• Can I change the descriptions of training?

  Is it possible to change the descriptions of training for Apple Watch? I never use the elliptical trainer or rower so I would have something that best fits my activity.

  Thank you!

  Hi Rebecca

  It is not currently possible.

  The types of training activities are also used to help your watch choose which sensors will be better and accurately to track and evaluate the results of your workout (for example the built-in accelerometer, built-in heart rate monitor, your paired iPhone data).

  If you want to suggest that Apple consider adding other types of activity in the application of the workout, you can do it here:

  https://www.Apple.com/feedback/watch.html

• Authorization of 'change step list Configurations! -Still a bug?

  I did research on a problem we have regarding our developers are able to edit list step configurations.

  My problem is the same that this bug is entered in 2007.

  Authorization of 'change step list Configurations!

  http://forums.NI.com/NI/board/message?board.ID=330&message.ID=15230

  This bug was already registered or addressed?

  We use an external database to store the names of users and their group. If Privileges.Configure.GrantAll is not assigned by the developer group, described in the linked post buttons are grayed out.

  We prefer developers do not have the ability to edit the users, but they must be able to customize the appearance of the development environment.

  The bug was recorded (inside CAR #52133), but it has not yet been addressed.

• How to change the description of .csf?

  Hello

  I am setting up the new color management settings and want to change the description of each policy.

  I know that the information should be in the .csf but would like to know how to add the custom message.

  Any help is greatly appreciated!

  See you soon

  Tom

  All you can do is select Save in the color settings dialog box and provide a name for the settings file. A dialog box opens that allows you to enter a custom description.

  Terri

• Change TIME Description

  Hi all

  From what I can tell, to change the description of a paralytic, I need to make a request for /vApp/ {identifier}

  Can someone give me an example of the XML valid I need to have in the body of the request?

  I do mainly:

  SET https://VCD/api/vApp/vapp-3d5e436e-a72f-463a-bb8a-b98fa6b122c9

  x vCloud-authorization...

  Accept: application / * + xml; version = 1.5

  Content-Type: application/vnd.vmware.vcloud.vApp+xml

  All XML I try with it just returns "the remote server returned an error: bad request (400).»

  Thank you!

  Mark

  Putting

  http://www.VMware.com/vCloud/v1.5"name ="Whatever">
    A text

  with the Type of content defined on application/vnd.vmware.vcloud.vapp+xml works for me.

  Andy

• How can I change the description of my site from MUSE?

  How to change the description of my site from MUSE? then when I place my website somewhere address the description that is displayed on the site will read what I want it to be?

  Thanks in advance.

  In mode 'Plan', right click your homepage or landing page.

  Right click > Page Properties > metadata > Description

  This is where you enter all what you want to be the description of your page. For example, to "acmenutsandblots.com" you could have something like "Acme nuts and bolts are the largest supplier of nuts, bolts, screws, washers, and nails... etc.

  You can also add descriptions for each of your pages also, not only the host or the landing page.

• change, step set name definitely Labview Testand API

  Hi, I can change a stepname to "run selected" steps in a VI, but it does not change at all times. The new name in the report file, but the old stage name stays the sequencefile. I save the sequencefile in VI and to see that it was recorded at the time but it dosnt take the new stepname in the seuencefile. Is there a possibility of othe to change the stepname permanently?

  Here is a photo of the façade, blockdiagram, sequencefile before and after and the report. I use Labview 2012 32 bit with Teststand 2012.

  

  I have not tested but you should know what you're doing after you rename step: use the SequenceFile reference.

  Identify the step from this reference (SequenceFile-> sequence-> step) and make the name change.

  Norbert

• change step 'mistake' to 'failure '.

  I use TestStand 2012 and I want to do the following:

  1 ignore an error of execution of a particular step.

  2. If receipt of an error of this step, go to 'Cleanup '.

  3. change the State of this step to "down" instead of "error".

  I was able to satisfy question 1 above by selecting 'Ignore errors of execution' 'run options.

  I was able to answer question 2 above by creating a "Condition of Custom" Step.Result.Status == "Error" of 'Actions Post'.

  I was not able to answer to question 3 above.  I tried 'Step.Result.PassFail = False' as a ' Expression after ' of 'Expressions', but that has not worked.  Step, I work with has started as a step in the Action.  Then I changed it to a stage of success/failure in the hope that I could change 'The status Expression' 'Expressions' but I couldn't.  I'd rather step as a step in the Action if I could.

  Thank you!  This helped.  I used Option 1.

• How to change step.result.status

  Hello

  I know just how I can configure the result step to something else state that "passed" or "failed". I know that I've done it before, but now I can't get this to work.

  Simple sequence attached file to demonstrate what I'm trying. Report as text in my machine looks like this:

  Start the sequence: MainSequence
  (Text of C:\Temp\status change test.seq)

  Pass/fail test: skipped
  Pass/fail test: failed
  TEST
  Test digital limit: failure
  Measurement: 0
  Limits:
  Low:                   9
  High: 11
  Comparison type: FROZEN (> =)<>

  Complete the sequence: MainSequence

  No reference to what we are missing?

  BR

  Petri

  Petri,

  http://zone.NI.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/step_execution/ contains a list of action a step performs when it is executed.

  As you can see, State Expression is evaluated after the Expression. Therefore, you can not use after Expression to set the Step.Result.Status property.

  The following two options, you can try to change the status of the step:

  Option 1:

  Create the custom step type and modify state Expression.

  Option 2:

  You can use the reminder of step motor after updating the result of step

  Option 3:

  Stage results will be added to the Locals.ResultList table. Therefore, after a stage performance, you can change the result container in the table if necessary.

  -Shashidhar

• Automatically open the change step where drag and drop a steptype

  Hello

  I would like to open (launch) Assembly step (labview module) when I drag and drop the step type. TestStand can step edt by the 'Edit' button or shortcut (Ctrl + E).

  Is it possible to do?

  I know that shortcuts are hardcoded...

  Thank you for your help

  Yannick

  Yes, it can be done. See this question recently on the same subject.

• Navigation to change the description of hr.hr_locations_all_tl column

  Hi gurus,
  
  How to navigate to the form that will update the DESCRIPTION of the table HR.HR_LOCATIONS_ALL_TL column.
  
  Thank you
  wood

  The responsibility of HRMS Manager
  Access - work Structures--> location
  Find your location.
  Keep the cursor on the field that you want to translate, say Description
  Select--> translations in the top Menu.
  A form open with as many records as your installed languages.
  Update from that which is of interest.

  Hope that helps.

  See you soon,.
  VB

• Change your Podcast Description and Image

  I've been podcasting for only less than a year. The show has grown and evolved, and I really want to update the description and image to better reflect and explain the show. The current description is super super short. I was told to change the description, I would need to change in the stream. If I do that, it'll ruin everything current subscribers?

  What is your show title and / or iTunes store page?

  Rob W